1. No category

How to Make a Silencer
1 of 8
http://www.gun-shots.net/make-silencer.shtml
Gun Shots
Pick a language
English
German
Spanish
French
Italian
Portuguese
Russian
Dutch
Greek
Japanese
Korean
Chinese
Chinese (Simplified)
Arabic
Main Menu
Gun Safety
Guns
Rifles
Handguns
Shotguns
Printable Targets
Gunsmithing
Gunsmiths
Unfinished Gun Receivers
Gun Manufacturers
Gun Auctions
Ballistics
Ammunition
Shotgun Shells
Reloading Data
Reloading Equipment
Gun Silencers
Class Three Gun Dealers
Air Guns
Stun Guns
Knives
12/14/2008 11:25 AM
How to Make a Silencer
2 of 8
http://www.gun-shots.net/make-silencer.shtml
How to Make a Silencer
Brian Douglas Kendall
A firearm silencer, also known as a suppressor, works in the same way as a car muffler. The muffler consists
of chambers for the compression to be dispersed and the sound to be redirected or absorbed. Heat is also
reduced throughout the muffler system. A firearm silencer works on the same principle.
There are generally three sections to a firearm silencer:
The first stage of the firearm silencer ususally consists of something that will absorb and dissipate
heat rapidly. It also allows for part of the compression to be reduced due to the quick cooling of
gases.
The second stage of the firearm silencer usually consists of rubber or plastic washers or discs that
help slow down the bullet to sub sonic speeds. It also helps reduce compression.
The third and more complicated stage of the firearm silencer usually consists of tall wooden
washers with rubber discs between them or thick chambers of soft plastic. The end of this stage
has a low wear rubber cylinder to slow down outgoing air.
The entire firearm silencer is contained within a one and a half inch 300 PSI (Pounds per Square Inch) plastic
PVC pipe.
Parts list:
1x 6-14" 300psi plastic PVC pipe
10-15x Rubber or medium hardness plastic discs
11-16x Soft Wood washers with 1 1/4" internal diameter
1x Rubber cylinder
5x Rubber discs
6x tall wooden washers, plain
2x steel plugs for the middle and front of the firearm silencer
1x heat and pressure dispersement rod with positioning rings, black.
2x stabilizer donuts to keep the firearm silencer straight, red.
4x separator discs, green.
1x Adapter to attach the firearm silencer to the firearm.
Discs can be cut out with a hole saw, purchased from any local hardware store. The materials can be bought
there also. Rubber or plastic can be cut out of tires or trashcans. wooden washers can be cut out of particle
board. The steel plugs can be bought at any automotive store as freeze plugs. The heat and pressure rod can
be bought at any metal shop; buy at 4-6 inches long Aluminium tube at about 1/8" thick with an ID (Internal
Diameter) as close to the bullet size as possible. Stabilizer donuts can be cut out of birch or oak wood and
then drilled with a hole drill. All discs and inserted materials except the head rod should be slightly under 1
1/2" diameter so that they will fill snugly in the tube.
The heat rod should be drilled full of holes 1/4" from each end. These holes should be about the same size as
the bullet. Leave about a quarter inch gap between each hole. Place a wooden donut at each end and wrap
12/14/2008 11:25 AM
How to Make a Silencer
3 of 8
http://www.gun-shots.net/make-silencer.shtml
the rod in aluminium screen. Screw the rod into the wood or use epoxy. Place this part into the tube first, this
should be very tight and could even have to be hammered into the tube, however do not use screws or glue to
hammer it in place.
Now place a steel plug in the tube so that the rounded end is facing the top or exit hole. Now place the
adapter in the tube followed by the stabilizer donuts. Make sure the barrel will seat securely in the adapter
and that the donuts are snug on the barrel. Make sure you place a separator disc between each stage. Drill
little holes in the tube about halfway into the adapter and donuts and place small screws in place to hold them
securely.
Note that a small angle is cut into the adaptor to facilitate the sight of the gun. The adaptor has to be reamed
at an angle so that the sight will not interfere.
Place a smaller PVC pipe in the front end and push the heat dispersement chamber up to the separator disc,
next to the adaptor.
Now from the top, place a wooden washer then plastic disc, washer, disc etc. 9mm ammunition usually
requires 12-15 and a 22 usually 6-9. There should be 12-15 discs and 13-16 wooden washers, do not end up
with a washer, now place another separator in place.
Last you will need to insert two rubber discs and a tall wooden washer, two discs then a washer. Now place
another separator in place. Place the large rubber cylinder in place, this should be about 1/2" thick. Place the
steel plug in place so that the rounded end is facing outwards and rivet it into the front carefully.
Before using be sure there is a clean hole all the way. Use a wooden dowel to see if the firearm silencer is
lined up with the barrel hole. All inserted parts should have a hole in the center that is comparable in size to
the size of the bullet's diameter.
Things you should know:
Suppressors will slow down the bullet and cause it to defract in another direction.
Suppressors do not operate well in cold wheather but this one will for the first few hundred rounds.
If you wish to shoot full auto you must double the quantity of internal parts and use an aluminium pipe
covered with neoprene sleeve, remember that metal dings.
Firearm silencers are illegal in some areas; be safe and know the firearm silencer laws in your location.
Books on How to Make a Silencer
Workbench Silencers
Here is a slew of new and interesting improvised silencer designs featuring innovative couplings plus
variations on aluminum cans, oil filters, PVC pipe, plumbing devices, water sprinkler pieces and other unique
materials. Warning: It is illegal to possess or make a silencer without BATF registration.
12/14/2008 11:25 AM
How to Make a Silencer
4 of 8
http://www.gun-shots.net/make-silencer.shtml
More Workbench Silencers
After writing his popular book Workbench Silencers: The Art of Improvised Designs, inventor George
Hollenback came up with a number of clever ways to affix common itemrs to the end of a firearm ot help
suppress its noisy report. More Workbench Silencers features the best of these designs, including four
different types of slip-on silencers and three perforated tube designs. These silencers are devised for the
popular Ruger .22 bull barrel pistol, the venerable Colt .45 semiauto handgun, the compact .380 Makarov,
and even the Maverick Model 88 bullpup shotgun. All of these gun silencers can be made with ordinary
materials available at any hardware store.
Modern Firearm Silencers
This illustrated report on suppressor technology presents innovative designs of well-known suppressor
manufacturers and offers definitive comparisons of models based on prices, features, kits, independent
manufacturers and technological advances. It also examines the history of the silencer and the attitudes of the
U.S. government, the public and terrorists about its usage.
Home Workshop Silencers I
More than fifty 9" x 12" working machinist's drawings present clear step-by-step directions for building three
different advanced firearm silencers for submachine guns and pistols. Improvised materials and machining
techniques are suggested.
12/14/2008 11:25 AM
How to Make a Silencer
5 of 8
http://www.gun-shots.net/make-silencer.shtml
Hayduke Silencer Book
Learn how to make a silencer from common items found around the house. George Hayduke, the Master of
Revenge, will show you how! Enter the world of muffled mayhem with these simple, effective and legal
silencer designs.
Silent But Deadly: More Homemade Silencers From Hayduke The Master
Despite what the Brady bunch might say, silencers serve some very civilized functions and contribute to a
saner, quieter way of life, which is why a lot of folks like them. After reading The Hayduke Silencer Book,
many readers shared their own ideas for simple designs you can build at home, legally. Here is the cream of
the crop.
How To Make A Silencer For A .22
This handy little manual teaches you everything you need to know to legally manufacture a silencer for any
.22 - without a lathe or welder. These inexpensive homemade silencers give you all the suppression you need,
thread on solidly, do not affect your accuracy or the gun's functioning and last for hundreds of rounds.
How to Make a Silencer For A .45
12/14/2008 11:25 AM
How to Make a Silencer
6 of 8
http://www.gun-shots.net/make-silencer.shtml
Because it does not produce a sonic "crack," the .45 is an ideal pistol for a silencer. Here is a nuts-and-bolts
guide to making your own silencer for the Colt 1911 Government Model .45 and its clones. Includes
construction details for all components, manufacturing tips that will save you time and effort, and plenty of
clear illustrations.
Sporting and Tactical Silencers
This is the most significant book on firearm silencers in years. Find out the story behind and incredible
capabilities of modern silencers used by elite military units and secretive government agencies. Author Alan
Paulson has been called "the dean of the American silencer experts today."
Silencer History and Performance: Cqb, Assault Rifle, and Sniper Technology
This highly anticipated second volume in the Silencer History and Performance series provides an
unprecedented look into the evolution, tactical employment and performance of historic and state-of-the-art
silenced firearms suitable for close-quarters combat, long-distance sniping and other professional applications.
It chronicles the production of pioneering silenced weapons used during World War II and the Cold War as
well as the more sophisticated low-signature designs and tactics that emerged from the Vietnam War and
again during an explosion of creative development in the 1990s. The authors have combined recently
declassified materials, numerous confidential sources and years of hands-on evaluations to reveal a wealth of
information about today's incredible screw-on and integral suppressors.
Workbench Silencers : The Art Of Improvised Designs (Silencers)
Here is a slew of new and interesting improvised silencer designs featuring innovative couplings plus
12/14/2008 11:25 AM
How to Make a Silencer
7 of 8
http://www.gun-shots.net/make-silencer.shtml
variations on aluminum cans, oil filters, PVC pipe, plumbing devices, water sprinkler pieces and other unique
materials. Warning: It is illegal to possess or make a silencer without BATF registration.
How To Make A Silencer For A Mini-14
The Ruger Mini-14 may be the ultimate plinker, hunting and survival rifle. If you already have the many
accessories available for it, why not complete your collection with a do-it-yourself silencer? Here are
step-by-step instructions to show you how to construct a tough, working silencer able to handle the high
pressures generated by the Mini-14's .223 round. All BATF rules apply.
Silencers For Hand Firearms
One of the world's foremost experts, Siegfried Huebner has published numerous books and articles in his
native Germany, and he has drawn from extensive research at the Mauser works, Heckler & Koch and the
German army proving ground to bring to you this, his first English-language text on silencers. This complete
and authoritative guide includes chapters on the principles of silencers, WWII silencers, clandestine weapons
and more.
Bookmark How to Make a Silencer
Latest Blog Posts
Palm Pistol
Gun Talk TV
The Perfect Deer Rifle
5.56mm 30 Round Magazine Improvement Program
.380 Handgun
12/14/2008 11:25 AM
How to Make a Silencer
8 of 8
http://www.gun-shots.net/make-silencer.shtml
SIG SAUER P250
Free Shotgun Giveaway
Welcome to Gun Shots!
© 2008 Gun Shots.
Tactical Training | Tactical Calendar | Liberty Lib | Private Military Companies | People's Democracy
Militia Net | Military Vehicles | Conspiracy Theories | Military Watches | Hollywood Politics | Political Humor
Famous Quote | Tactical Boots | Tactical Gear | Flags of the World | Gun Safes
12/14/2008 11:25 AM