P PYROTECH
ISO 9001 : 2008 Certified
PRODUCT
CATALOGUE-SENSORS
Occupancy Sensors
q
Heat Sensors
q
Smoke Sensors
q
Sensing Solutions For You
“Committed to Quality, Service & Value”
Company Profile
About Us :
Pyrotech Group is an ISO 9001-2008 company specializing in manufacturing of
electronic switches (Micro Motion Sensors, Daylight Dimming, Heat Sensor, Micro Wave
Sensors, Smoke Sensor) for the control of Lighting, Heating, Fire, Ventilation etc with the
latest machinery in it’s 40000 sq. ft. modern facility. Special version of our products can be
made to suit customers needs. Our designers and technicians work in close coordination with our clients to meet their expectations and offer them cost-effective and
quality solutions. We provide quality product by monitoring the manufacturing process at each stage & giving inputs to
improve continuously. Pyrotech came into existence in 1976 and has registered a very good growth year after year since
inception.
PIR Occupancy Sensors
Our PIR based Occupancy Sensors is a fully automatic indoor light controller capable of controlling upto 2000W
incandescent or 1000W fluorescent lighting. This product is widely used in houses, hotels, schools & storage etc.
Features :
?
(360 Degree-Ceiling / Flush Mount & 180° - Wall
Mount) micro motion detectable.
?
Ceiling / Flush / Wall mount design.
?
Photo sensor inside for smart control
?
Run-on time adjustable
?
Ambient lux, setting adjsutable
?
Up to 2000 W loading
?
Support IR remote Control for On/ Off / Auto Control
Ceiling Mount
Flush Mount
Specifications :
?
Operating Voltage
?
Detection Angle
?
Detection Range
?
Run On Time Setting
?
Ambient Light Setting
?
Operation Mode
?
Warm up time
Output
?
Mounting
: 90-270 VAC / 50 Hz Power Consumption : 1 W Max.
Loading 2000W for Incandecent,1000 W for Fluorescent
: 360°- Ceiling/Flush Mount & 180°- Wall Mount
: 6m for micro motion @2.5m height
: 12m for walk across motion @ 2.5m height
: 5 sec to 40 min.
: 10 – 2000 lux.
: Auto/On/Off
: Approximately 1 minute
: Relay Output
: Ceiling / Flush / Wall
Wall Mount
Remote
Enviornmental Specifications :
?
0°C to 60° C Temperature Range
?
Isolation Protection : Class 2
Dimension :
?
Housing
?
Colour
?
Size
: Plastic
: White
: Ceiling Mount - 54(H)x114.5(D) mm
Flush Mount
- 76(H)x76(D) mm
Wall Mount
- 91(L)x63(W)x87(H) mm
: 160gm - Ceiling Mount, 137gm - Wall Mount, 91gm - Flush Mount
?
Weight
Connection
Diagram :
Ordering Information :
PIR
TYPE
201 : CEILING
202 : FLUSH
- MOUNTING - REMOTE CONTROLLING
WITH/WITHOUT REMOTE
WRC : WITHOUT REMOTE
RC : WITH REMOTE
203 : WALL
“Committed to Quality, Service & Value”
Ordering Example : PIR-201-RC
CODE
PIR
201
RC
Detail about Code
Series
Mounting
Remote
Example Code
PIR
Ceiling Mount
With Remote
L
L
N
A
N
Load
P PYROTECH
ISO 9001 : 2008 Certified
Fire Alarm System : Sensors, Panel & Manual Call Point
Smoke
ALL PRODUCTS ARE EN-54/NFPA COMPLIANT
Our Smoke Sensors are for fire alarm system, with photoelectric
signal processing technique, stable operation, easy installment
and flexible output mode for adapting various alarm control
panel. This product is widely used in houses, hotels, schools and
storage etc.
Conventional
Stand Alone
Features :
?
Photoelectric signal processing technique
?
Excellent performance, low power exhaust and infrared photoelectric diode
?
SMT Design / High stability
?
2 Wire Detector (Pulse/Buzzer Output)
?
4 Wire Detector [Relay Output (NC/NO)
?
Easy Installation
?
Manual test function / Power Indication LED
?
Easy Maintenance
Connection Diagram :
Specifications :
GND
2
1
Operating Voltage (Conventional)
Operating Voltage (Stand Alone)
Standby Current
Operating Current (Conventional)
Operating Current (Stand Alone)
Detecting Range
Working Temperature
Working Humidity
Alarm Mode
Mounting
Output
: +12VDC / +24VDC/ +48VDC
: +9VDC Battery for Stand Alone
: <200ìA (for both)
: (2 wire) Alarm Current 10 mA @ 48 VDC
(4 wire) Alarm Current 70 mA @ 48 VDC
: 9mA
2
: 20M
: -10°C ~ 60°C
: <95% RH
: Network Alarm Signal (for Conventional)
: Ceiling
: NC/NO(Optional), Buzzer(Optional), Pulse Output
PULSE
OUTPUT/
RELAY(C)
4
3
VCC
RELAY OUTPUT
NO/NC
Ordering Information :
Dimension :
?
Housing
?
Color
?
Size(Conventional)
?
Size(Stand Alone)
?
Weight
Ordering Example : SMOKE-201-A-B
: Plastic
: White
: 51(H)x104(D)mm
: 37(H)x104(D)mm
: 177gm (Conven)
: 255gm (Stand A)
CODE
SMOKE
201
A
B
Detail about Code
Series
Type
Output
Input Power Supply
SMOKE - TYPE
Example Code
–
Conventional
Pulse Output
24 VDC
TYPE
-
OUTPUT
OUTPUT
-
PSUP
POWER SUPPLY
201 : Conventional
A : Pulse Output
A : 48 VDC
301 : Stand Alone
B : 2 Wire Output
B : 24 VDC
C : Relay Output
C : 12 VDC
Note : Output & PSUP is not applicable for TYPE-301
Heat
Our Heat Sensors for alarm system, with temperature sensing signal processing technique, stable operation, easy
installment and flexible output mode for adapting various alarm control panel. This product is widely used in houses,
hotels, schools and storage etc.
Features :
Specifications :
?
Temperature sensing signal processing technique
?
Excellent performance, low power exhaust and
Operating Voltage (Stand Alone)
Operating Voltage (Conventional)
Standby Current
Operating Current (Stand Alone)
Operating Current (Conventional)
Detecting Range
Working Temperature
Working Humidity
Alarm Mode
Mounting
Output
infrared photoelectric diode
?
SMT Design / High stability
?
2 Wire Detector (Pulse/Buzzer Output)
?
4 Wire Detector [Relay Output (NC/NO)
?
Easy Installation
?
Manual test function / Power Indication LED
?
Easy Maintenance
“Committed to Quality, Service & Value”
:
:
:
:
:
:
:
:
:
:
:
+9VDC Battery
+12VDC/ +24VDC/ +48VDC
<200ìA (for both)
9mA
(2 wire) Alarm Current 19.2 mA@ 48VDC
20M2
-10°C ~ 60°C
<95% RH
Network Alarm Signal (for Conventional)
Ceiling
NC/NO(Optional), Buzzer(Optional), Pulse
P PYROTECH
ISO 9001 : 2008 Certified
Heat
Dimension :
?
Housing
?
Colour
?
Size(Conventional)
?
Size(Stand Alone)
?
Weight
Conventional
Stand Alone
: Plastic
: White
: 51(H)x104(D)mm
: 45 (H)x104(D)mm
: 167gm(Conventional)
: 245gm(Stand Alone)
Ordering Information :
HEAT
-
TYPE
-
OUTPUT
-
Connection Diagram
PSUP
Ordering Example : HEAT-201-A-B
CODE
HEAT
201
A
B
Detail about Code
Series
Type
Output
Input Power Supply
Example Code
–
Conventional
Pulse Output
24 VDC
TYPE
GND
OUTPUT
1
POWER SUPPLY
201 : Conventional
A : Pulse Output
A : 48 VDC
301 : Stand Alone
B : 2 Wire Output
B : 24 VDC
C : Relay Output
C : 12 VDC
2
PULSE
OUTPUT/
RELAY(C)
4
VCC
3
RELAY OUTPUT
NO/NC
Note : Output & PSUP is not applicable for TYPE-301
Alarm Panel
Conventional Fire Alarm Control Panel is a 24volt, 2 or 4 zone, Class B, Conventional
Fire Alarm Control Panel. It is designed exclusively to meet the latest market
requirements and microprocessor technology, with stand-by batteries. It has functions
of operation indication, fault indication, alarm indication and cable checking for short
circuit or broken circuit.
Specifications :
?
AC Power: AC220V±10% 50Hz, 2.0 amps, minimum 14 AWG wire (2.0
mm²) with 600-volt insulation.
?
Battery: Sealed lead-acid batteries, Maximum battery charger capacity: 4AH
battery
?
Total 24 V system power: 3.0 amps
?
Standby Current: 65mA @ DC24V
?
Zone Capacity: can be connected with 30 fire detectors and infinite manual
call points
?
Fire & Fault Contact Outputs: 1.0 amps DC24V or AC125V
?
Using environment: Temperature: 0°C~50°C Related Humidity: =95%
(40±2°C)
?
Dimensions: 265(L)×335(W)×87(H)mm
Features :
?
One set of volt free changeover contacts operable on fire
?
One set of volt free changeover contacts operable on
fault
?
Class change input for remote control
?
Zone and alarm disablement
?
28V 125mA fused supply permanently available
?
28V 300mA fused supply available for fire alarm bells or
sounders
?
Passive repeater available
Extra Accessories : Manual Call Point
: Siren
Pyrotech Electronics Pvt. Ltd. (Unit-I)
F-16A, Road No.3, M.I.A, Udaipur (Raj) - 313003, INDIA
Ph. : +91-294-3264182, Mob. : +91-9352292762, Fax : 2492126
WhatsApp : +91-9529155506/+91-9829998506
Email : [email protected]/[email protected]
Website link : http://www.peplelectronics.com/product.php?category_id=2
www.peplelectronics.com
MKTG\SIDDIQUE_UP\PIR_30.04.2015