Working with education departments to make
Schools & Colleges
Accident Free Environments
• Is your workshop machinery due it’s Annual Service?
• Are you compliant with BS4163 & BB81?
• Do all rotating blades or parts stop within 10 seconds of the emergency stop being pressed?
RS Design & Technology
Tel: 0845 685 0202
www.rsdesignandtechnology.co.uk
RS
Design &
Technology
Accident Free Environments
The PUWER 98 Regulations recommend that your workshop machinery is
serviced annually and that the information is recorded, and the machines
certificated for insurance purposes.
Most County Councils require that their schools follow these recommendations.
Servicing is the most cost-effective way of ensuring the longevity of your
equipment and can be carried out with almost no disruption to classes, by our
qualified engineers.
Our servicing is thorough, exact and documented for your peace of mind, and
our knowledge of current legislation is second to none.
Tel: 0845 685 0202
www.rsdesignandtechnology.co.uk
Unit 24, Solent Industrial Estate
Hedge End, Southampton SO30 2FY
Electrical & Mechanical Installatio
Our Services
Annual Health & Safety Inspections.
The service and reporting of Design & Technology machinery and workshop
equipment in accordance with the requirements of BS4163 – 2007, PUWER
Regulations 1989, Management of Health & safety at Work Regulations 1999
and the recommendations of the National Association of Inspectors in Design
& Technology.
Annual Inspection, Though Examination and Report of LEV Plant.
Inspection of Wood dust extraction system and heat/fume extraction plant
in accordance with the requirements of the COSHH Regulations (amended to
2004) Regulations 9.1 and HSE CoP HSG54/37 BOHS recommendations.
Electrical Installation.
Inspection of Electrical Installation in accordance with BS7671 2008 and
17th Edition Wiring Regulations.
Installation and Design of D & T Workshops.
Complete or partial Installation and design of Design and Technology
Workshops/Workshop Equipment in accordance with BS4163 2007. PUWER
Regulations 1998. DfE Building Bulletins.
Machinery Repairs - Relocation – Sales – Spares
We can supply new and reconditioned machinery. Relocation of machinery
and the provision of spares including blades for saws and planner thicknessers.
allation & Maintenance Engineers
Are your pupils at risk of injury
and are you in LEGAL JEOPARDY?
In the event of an accident, can you answer yes
to the following?
• Does you Department comply with the PUWER 98 Regulations?
Yes
No
10 seconds of the emergency stop button being pressed?
Yes
No
and servicing for your Design & Technology Department?
Yes
No
Yes
No
• Do your machines with any rotating parts or blades stop within
•
• Are you protected by due diligence with supporting documentation for
your machinery in the event of legal action resulting form an accident?
RS Design & Technology will make sure
you can answer yes!
We provide servicing and compliance advice to schools and colleges throughout the South of England. We are a respected
and trusted provider of services to Schools & Colleges approved at County Council level to install and maintain Design
and Technology Departments.
Call Us Now for Compliance Inspection
and/or Department Servicing
on 0845 685 0202
For Further information visit our website at;
www.rsdesignandtechnology.co.uk
Recent Department Installation
& Servicing includes;