Embedded Technology Solutions How to Order Guide D00551, B.2 January 2014

Embedded Technology Solutions
How to Order Guide
D00551, B.2
January 2014
The most current version of this document is available at:
http://www.hidglobal.com/documents/embedded_htog_en.pdf
To check status on your order, go to:
http://www.hidglobal.com > Knowledge Center > Customer Support > Customer Order Status
HID Global, HID, the HID logo, iCLASS, iCLASS SE, multiCLASS, OEM75, Indala, eProx, identiCLASS, veriCLASS, SIO, Secure Identity
Object, Seos, OMNIKEY and ProxPoint, are the trademarks or registered trademarks of HID Global Corporation, or its licensors, in the U.S.
and other countries.
MIFARE, MIFARE Easy, MIFARE DESFire, MIFARE Classic and MIFARE DESFire EV1 are trademarks or registered trademarks of NXP B.V.
and are used under license.
This document is subject to change without notice.
Document History
Date
Author
Description
Version
01/15/14
S.Ardiley
Add new option E (Clear Tag only) for base pn=1390
B.2
12/12/13
M Butler
Remove complete L-Custom Prox option
B.1
12/10/13
M Butler
Removed Indala Prox references
B.0
12/2/13
S Ardiley
Added eUnit for MIFARE DESFire EV1. Remove option D for base PN 1390
A.9
10/02/13
M Butler
Added a min. quantity for the iCLASS SE Reader Module.
A.8
12/06/13
M Butler
Removed Developer Services Plus
Add large antenna to iCLASS SE Reader Module Range
Update MIFARE Easy F/W revision
A.7
04/03/13
M Butler
Updated 5x27 CK Readers to include Indala, Elite and V2 Keyset options
A.6
02/27/13
M Butler
Update to MCM ordering options
Removal of OEM75 and OEM150 DTK’s
A.4
11/2/12
M Butler
Update to OEM50 and OEM50 Antenna pages. Added note to 125 kHz Contactless Embedded Reader
Module page.
A.3
10/4/12
M Butler
Addition of iCLASS SE Reader Module
Remove OEM150 and OEM75 Development Tool Kits
Remove identiCLASS Enhanced Reader Board
A.2
04/13/12
M Butler
SIO Processor Card quantity, OMNIKEY Embedded Readers.
A.1
Embedded Technology Solutions How to Order Guide - D00551, B.2
Contents
Overview ...................................................................................................................................................... 4
Secure Identity and General Purpose Solutions ....................................................................................................... 4
Gov-ID Solutions ...................................................................................................................................................... 4
Cashless Payment Solutions .................................................................................................................................... 4
Logical Access/PC Applications ............................................................................................................................... 4
Contactless Embedded Transponders ..................................................................................................................... 4
Product Selector Guide - Secure Identity & General Purpose Applications .............................................................. 5
Secure Identity and General Purpose Solutions ..................................................................................... 6
iCLASS SE Reader Module...................................................................................................................................... 6
iCLASS SE Reader Module Accessories ................................................................................................................. 7
iCLASS OEM75 Module ........................................................................................................................................... 8
iCLASS OEM75 Antenna Part Numbers and Options .............................................................................................. 9
iCLASS OEM75 Accessory Part Numbers and Options ......................................................................................... 10
iCLASS & multiCLASS OEM150 Module ............................................................................................................... 11
iCLASS & multiCLASS OEM150 Antenna Part Numbers and Options................................................................... 12
iCLASS & multiCLASS OEM150 Expansion Modules for Communication and Proximity Card Support ................ 12
iCLASS OEM50 Module ......................................................................................................................................... 13
iCLASS OEM50 Antenna Part Numbers ................................................................................................................ 13
MIFARE Easy Embedded Readers ........................................................................................................................ 14
iCLASS SE Processor ............................................................................................................................................ 15
iCLASS SE Processor Accessories ........................................................................................................................ 15
Product Selector Guide - Gov-ID Applications ...................................................................................... 16
Gov-ID Solutions....................................................................................................................................... 17
identiCLASS Reader Platform ................................................................................................................................ 17
identiCLASS Antennas ........................................................................................................................................... 18
identiCLASS Accessories ....................................................................................................................................... 18
Dual-ISO Embedded Reader.................................................................................................................................. 19
Product Selector Guide - Cashless Payment ........................................................................................ 20
Cashless Payment Solutions .................................................................................................................. 21
veriCLASS - Payment and Ticketing Reader Platform ........................................................................................... 21
veriCLASS Accessories.......................................................................................................................................... 21
Multi-ISO - Embedded Reader Family .................................................................................................................... 22
OMNIKEY 5321-PAY.............................................................................................................................................. 22
Product Selector Guide - Logical Access/PC Applications ................................................................. 23
Logical Access/PC Applications ............................................................................................................. 24
OMNIKEY Readers ................................................................................................................................................ 24
OMNIKEY Embedded Technology Chipsets .......................................................................................................... 25
OMNIKEY Smart@Link Chipset Accessories ......................................................................................................... 25
Product Selector Guide - 125 kHz Proximity Reader Technology ....................................................... 26
125 kHz Contactless Embedded Reader Module Ordering .................................................................. 27
125 KHz Embedded Reader Module Antennas ...................................................................................................... 28
Multi-tag Embedded Reader................................................................................................................................... 28
Indala Proximity ........................................................................................................................................ 28
OMR Module Ordering Guide ................................................................................................................................. 28
Page 2 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
13.56 MHz Contactless Embedded Transponder Ordering .................................................................. 29
207 - iCLASS eUnit Ordering Guide Part Numbers and Options............................................................................ 29
1439/1449 - MIFARE eUnit Ordering Guide Part Numbers and Options ................................................................ 30
1453 - MIFARE DESFire EV1 eUnit Ordering Guide Part Numbers and Options .................................................. 31
125 KHz Contactless Embedded Transponder Ordering ..................................................................... 32
1390 - eProx Tag Embedded Proximity Part Numbers and Options ...................................................................... 32
Appendix A - Development Tool Kits ..................................................................................................... 33
OMNIKEY 5x21 - 3134ANG0000 ........................................................................................................................... 33
iCLASS SE Reader Module - 3134ANM0000......................................................................................................... 34
identiCLASS - 3134ANH0000 ................................................................................................................................ 35
veriCLASS - 3134ANJ0000 .................................................................................................................................... 36
OMNIKEY 5x27CK - 3134ANL0000 ....................................................................................................................... 37
iCLASS SE Processor - 3134ANK0000.................................................................................................................. 38
MCM - 3134BNC0000 ............................................................................................................................................ 39
ProxPoint Plus - 3134AND0000 ............................................................................................................................. 40
eProx Lock - 3134ANE0000 ................................................................................................................................... 41
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 3 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
Overview
Welcome to Embedded Modules and Transponders by HID.
HID offers developers a variety of reader boards and embedded modules designed to meet a variety of requirements for form, fit, and function.
Use the Product Selector Guide - Secure Identity & General Purpose Applications, page 5, or speak with one of our integration specialists
(refer to the following email addresses) to find the board or module that best meets your requirements across a number of design and use
criteria.
Integration Specialist Contact:
EMEA
Americas
[email protected]
APAC
[email protected] [email protected]
Embedded card solutions allow third-party application providers to utilize HID transponder technology (for example, coils) to implement
transponder-driven applications. Choose small-sized coils in a variety of technologies (for example, 125 kHz proximity and 13.56 MHz
contactless smart card), sizes, and configurations.
This How to Order Guide provides information for embedded modules and transponders designed to meet the requirements for various major
application sectors described in detail in each relevant section
Secure Identity and General Purpose Solutions
HID Global is the trusted, worldwide leader in providing RFID solutions for the delivery of Secure Identity. The HID Connect embedded
solutions provide OEM's with a unique platform to extend the use of HID technology beyond traditional access control to include applications in
banking, cashless payment, biometrics, alarm system control, HVAC, medical devices, laptops, secure print and much more. We offer a wide
range of reader boards and embedded modules designed to meet a variety of requirements for form, fit and function.
Gov-ID Solutions
HID Global has for a considerable period of time been the driving force in the development of personal credentials that are more secure, more
efficient and more interoperable between systems and countries. Our focus on e-documents has made HID Global the world’s number one
supplier if secure contactless technology transponders. This is the core technology for
e-passports, e-visa, e-national ID cards and other digital secure credentials. We compliment our secure contactless technology offerings with
equally deep expertise in secure microcontrollers and operating systems.
Cashless Payment Solutions
Whether it is at a train station, a quick service restaurant or a theatre, speed and convenience are important factors for any transaction - which
is precisely what cashless payment solutions provide.
HID Global is the go-to resource for manufacturers, operators and integrators of cashless payment systems around the world. Our proven
expertise in secure contactless technology, along with the widest selection of cashless payment products in the industry means we are in an
ideal position to participate in cashless payment projects of any size or scope.
Whether your application requires an embeddable module or board, finished reader of desktop convenience HID Global provides a complete
portfolio of solutions to meet your requirements.
Logical Access/PC Applications
Logical access encompasses a number of PC- and network-related applications including secure authentication and/or log-in to the PC or
network, secure email, data encryption, file/folder encryption, single sign-on and remote VPN access. By collaborating with IT industry leaders,
HID Global has complemented its physical access control offerings with an extensive portfolio of logical access offerings enabling a wide
range of logical/physical convergence solutions.
Contactless Embedded Transponders
iCLASS eUnit - The HID iCLASS® 13.56 MHz transponder can be used in diverse tagging applications such as long-range gate transmitters,
containers and key fobs. The iCLASS eUnit is easy to add to any device by gluing, molding or fastening the eUnit Tag transponder to any nonmetallic housing.
eProx Tag - HID’s eProx® 125 kHz transponder assists third party manufacturers with embedding HID proximity technology into applications
such as gate transmitters, key heads, and badges. The eProx transponder comes in a number of form factors with and without a clear poly
covering, depending on the coil diameter. The transponder can be easily glued, molded or fastened into any non-metallic housing.
Page 4 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
Product Selector Guide - Secure Identity & General Purpose Applications
13.56 MHz Contactless & Contact Reader Technology
DTK
3134ANM0000
N/A
3134ANK0000
Embedded
Module
iCLASS SE® Reader Module1
MIFARE® Easy Reader
Core
Features
iCLASS SE Reader Platform
Ultra Low Power for Battery Applications
MIFARE Smart Cards
Interface(s)
TTL,UART, SPI,
Wiegand, Clock-and-Data
CMOS TTL
Power
3.5 to 10VDC (HF)
5 to 10VDC (HF + LF)
(4 or 6x 1.5V AA or 1 x 9V Battery / Line Power)
5 VDC + or -10% regulated
Voltage classes A, B & C (5V, 3V & 1.8V respectively)
supported
Current
<10µA during sleep
<120mA during card read
150mA
<10mA in power down mode
< 10mA at 10 MHz internal clock frequency at 5.5V supply
Typical 25mA at 66MHz internal clock
Antenna(s)2
Single External HF, off-the-shelf
Single External LF, off-the-shelf
Single External
Single Integrated
N/A
Contact Slot
None
None
None
N/A
Protocol
Wiegand, HID Custom and Pass-through
Custom ASCII and Binary Protocol
ISO7816 -3 (T=1)
Integration
Difficulty
Medium
“Embedded in Host System, Antenna Optimization Required”
Medium
Medium
Difficult
Size
Small Form Factor: 1.1 x 1.2 x 0.272 in
27.94 x 30.48 x 6.91 mm
Medium Form Factor: 1.3 x 1.7 x 0.281 in
33.02 x 43.18 x 7.13 mm
1.0 x 1.18 x 0.19 in
2.0 x 25.5. x 30.0 mm
2.76 x 1.77 x 0.48 in
70.0 x 45.0 x 12.1 mm
ID1/ID-000 Card
or
5mm x 5mm Surface Mount Device
MIFARE Easy Reader Board
SIO® Processor
iCLASS, iCLASS SE Processor
Image
1 USGSA
2 Custom
RS-232
ISO7816 -3 (T=1)
FIPS201 (PIVII) Approved.
tuning and custom size of antenna available -contact your HID representative for further information.
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 5 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
Secure Identity and General Purpose Solutions
iCLASS SE Reader Module
The iCLASS SE Reader Module is part of HID Global’s open iCLASS SE platform that goes beyond the traditional smart card model to offer a secure, standards based technology-independent and
flexible solution based on Secure Identity Object™ (SIO), a new portable and open credential methodology. Building on the success of the existing OEM modules, including OEM50/OEM75, the
iCLASS SE Reader Module enhances existing functionality with new features that enable the use of NFC smart phones and other devices for mobile access while also providing increased levels of
security. HID’s iCLASS SE Reader Module allows integrators to design third party solutions that support a full range of contactless card technologies, including iCLASS, MIFARE and HID Prox as
well as integration into U.S. Government applications. The iCLASS SE Reader Module’s dual frequency capability allows the use of both high frequency and low frequency credentials with the
same reader, providing a solution for mixed credential and credential migration applications.
Base
Part #
Description
iCLASS SE Reader Module - Read/Write Module Circuit card Assembly Standard
iCLASS, SIO on iCLASS (iCLASS SE/SR), SIO on MIFARE Classic, SIO on
MIFARE DESFire EV1®
SE32003
Dimensions: 1.1" x 1.2" x 0.31” (28 x 30 x 8mm)
iCLASS SE Reader Module - Read/Write Module Circuit card Assembly Standard
iCLASS, SIO on iCLASS (iCLASS SE/SR), SIO on MIFARE Classic, SIO on
MIFARE DESFire EV1
SE32103
Dimensions: 1.3" x 1.7" x 0.31” (33 x 43 x 8 mm)
Optional
Config
Suffix
Current
Rev #
125kHz
Interpreter1
Security2
A
0 - HF Only
P - Standard Prox
0 - Standard-V1
2 -Standard-V2
E - Elite
-
- xxxxxx
A
0 - HF Only
P - Standard Prox
0 - Standard-V1
2 -Standard-V2
E - Elite
-
- xxxxxx
Product Image
1 125
kHz Prox Interpreters:
0 = HF Only - No Prox support
P = Standard format support = HID Prox, AWID and EM4102
2 Security
Options:
0 = Standard Security (Version 1) Keyset - coupled with the Standard 13.56 MHz interpreter provides compatibility with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 credentials.
2= Standard Security (Version 2) Keyset - coupled with the SIO (Only) 13.56 MHz interpreter provides compatibility with iCLASS SE, MIFARE Classic SE and MIFARE DESFire EV1 SE credentials.
E = Elite reads only SE Elite™ credentials with unique matching keys. Elite works with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 with matching Elite keys. Line item on PO requires ICE reference number.
3 Minimum order of 100 pieces, supplied in trays of 20 pieces. Orders for quantities other than multiples of 20 pieces are not possible
Page 6 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
iCLASS SE Reader Module Accessories
Model Description
Base Part Number
iCLASS SE Reader Module HF Antenna (Air Tuned)
34 x 48 mm (1.34 x 1.89 in) - Minimum Order Quantity 20 pieces
4090A10
iCLASS SE Reader Module HF Antenna (Air Tuned)
38 x 83 mm (1.5 x 3.26 in) - Minimum Order Quantity 20 pieces
4090A11
iCLASS SE Reader Module Antenna Cable (Pack of 20)
51mm (2in) For use with SE3200 - Antenna Connector on one end, bare wire connection on
other end.
4091A10
iCLASS SE Reader Module Antenna Cable (Pack of 20)
51mm (2in) For use with SE3210 - Antenna Connector on one end, iCLASS SE Reader
Module Connector on other end.
4091A11
iCLASS SE Reader Module LF Antenna
65 x 28 x 1.3 mm (2.56 x 1.10 x .050 in)
6500-101-03
iCLASS SE Reader Module Developer Tool Kit
3134ANM0000
iCLASS SE Test Card Pack
Pre-programmed card set to test data output from iCLASS SE Readers
3156-700
1Supplied
1
in trays of 20 pieces packed in boxes of 5 trays (100 pieces in total). Orders for quantities other than multiples of 20 pieces are not possible and orders for quantities other than multiples of 100 pieces will be subject to a re-packing surcharge
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 7 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
iCLASS OEM75 Module
Note: The OEM75 is no longer available for new integration See iCLASS SE Reader Module for new integration projects.
Designed as the next generation to the OEM50; the OEM75 is an extremely compact reader component that links 13.56 MHz smart cards and applications. The OEM75 provides compatibility with
all memory locations across the most popular smart card technologies available. These include HID iCLASS, MIFARE (Sector), CEPAS and DESFire credentials; making this embeddable module
the most versatile module on the market today. The OEM75 features an ultra-low power consumption mode that only pulls a nominal current <15uA in its idle state making the OEM75 the ideal
module for battery powered applications. In addition, the OEM75 was developed to provide eProxL integrators a migration path to 13.56 MHz technologies in their products.
Description
iCLASS OEM75 Read/Write Module Circuit Card Assembly
13.56 MHz iCLASS or MIFARE Contactless Smart Card Module
Dimensions: 1.1 in x 1.2 in (2.8cm x 3.0cm)
Base
Part #
Current
Rev #
Connectors1
MIFARE SAM Option
3141
A
D = None
S = MIFARE SAM
N = No MIFARE SAM
(A05 and C01 ONLY)
3141
A
S = MIFARE SAM
A = Pwr/Int/Ant
N = No MIFARE SAM
E = Pwr/Int
(A05 and C01 ONLY)
C = No Connectors
Size Similar to: OEM50
iCLASS OEM75 Read/Write Module Circuit Card Assembly
13.56 MHz iCLASS or MIFARE Contactless Smart Card Module
Dimensions: 1.3 in x 1.7 in (3.3cm x 4.3cm)
Size Similar to: eProx Lock
Feature Bundle2
Optional
Config
Suffix8
-
A05 = iCLASS & PIV 3 & 4
B05 = iCLASS & MIFARE 5 & 6
C01 = Transit (FeliCa IDm & CEPAS CAN) 7
- xxxxxx
-
A05 = iCLASS & PIV 3&4
B05 = iCLASS & MIFARE 5 & 6
C01 = Transit (FeliCa IDm & CEPAS CAN) 7
- xxxxxx
1 None
= No Connector Options, Pwr/Int/Ant = Power, Interface and Antenna Connector (3 connectors in total), Pwr/Int = Power and Interface (2 connectors in total).
feature bundle is the set of firmware/ applications that is downloaded onto the module hardware. In the field it is possible to download the required feature bundle to the module to fit the card population. B05 Feature requires an OEM75 with the MIFARE SAM chip
option.
3 PIV support is only for non-GSA FIPS 201 certified applications (for example, vending, vehicle sharing, MFP). The OEM75 does not support applications requiring GSA certification (for example, granting access to the facility).
4 Supports enhanced autonomous read capabilities for iCLASS credentials and default PIV option outputs simultaneously.
5 Requires an OEM75 with the MIFARE SAM chip option.
6 Supports enhanced autonomous read capabilities for iCLASS and MIFARE credentials simultaneously.
7 Does not support enhanced autonomous read capabilities for iCLASS credentials. However, this feature bundle supports simultaneous iCLASS HID Access Application, CEPAS CAN and Felica iDm autonomous read capabilities.
8 An optional configuration suffix is appended to any base parts that require non-default module/feature bundle configuration. If default configuration of the module/feature bundle is all that is required, the optional suffix need not be appended.
2 The
Part Number
Description
Config Card Part Number
000001
Power Mode/Timing #1: Ultra-low power mode. Sleep immediately after data transmission. (Use only with Autonomous Read Applications)
2000-08-11-000035
000002
Power Mode/Timing #2: Ultra-low power mode. Serial commands enabled 5 seconds after data transmission.
2000-08-11-000034
000003
Power Mode/Timing #3: Ultra-low power mode. Serial commands enabled 5 seconds after data transmission,
Card Present line active for 10ms, Wiegand Output Disabled, Applications and Protocols: iCLASS = CSN, MIFARE = CSN
2000-08-11-000060
E00000
Default Elite configuration. Order must be accompanied by customer specific Elite reference number.
N/A
Configuration Options Note: The OEM75 is designed to be a powerful and configurable module fitting any integration application. The custom configurations listed in this section are OPEN configurations which any
entity may purchase. Other configuration extensions exist, but are only purchasable by the requestor and designees. An HID Connect Applications Engineer helps determine your specific configuration during the
integration of the module. Once locked down, a configuration extension is created and the part number becomes orderable from HID.
Page 8 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
iCLASS OEM75 Antenna Part Numbers and Options
Description
1
Base Part No.
Current Rev. No.
Tuning
iCLASS OEM75 Antenna Circuit Card Assembly
Dimensions: 1.5in x 3.3in (3.8cm x 8.4cm)
Size Like: OEM150 R10 (p/n 3135B)
1
FIPS 201 Compliant Capable
3142
A
A = Air Tuned
N = Non-Tuned
iCLASS OEM75 Antenna Circuit Card Assembly
Dimensions: 0.9 in x 1.5 in (2.4cm x 3.8cm)
Size Like: eProx Lock 125 kHz Antenna
3144
A
A = Air Tuned
N = Non-Tuned
iCLASS OEM75 Antenna Circuit Card Assembly
Dimensions: 1.5 in x 1.7 in (3.9cm x 4.4cm)
3146
A
A = Air Tuned
N = Non-Tuned
iCLASS OEM75 Antenna Circuit Card Assembly
Dimensions: 3.1 in x 3.1 in (8.0cm x 8.0cm)
Size Like: OEM50 Large (p/n 3132A)
1
FIPS 201 Compliant Capable
3148
A
A = Air Tuned
N = Non-Tuned
iCLASS OEM75 Antenna Circuit Card Assembly
Dimensions: 1.3 in x 1.9 in (3.4cm x 4.8cm)
Size Like: OEM50 Small (p/n 3133A)
3153
A
A = Air Tuned
N = Non-Tuned
Ability to read FIPS 201 cards depends on the environment. Any metal near the antenna impacts the ability to read FIPS 201 cards.
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 9 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
iCLASS OEM75 Accessory Part Numbers and Options
Description
Base Part Number
iCLASS OEM75 Antenna Cable, 4.5 in [114.3 mm] - For Use With: 3141AD, 3141AC or 3141AE
Flat Flex Cable - Bare wire connections on both ends
3141-200-07
iCLASS OEM75 Antenna Cable, 4.0 in [101.6 mm] - For Use With: 3141AA
Flat Flex Cable - Bare wire connection on one end, OEM75 cable connector on the other end
3141-200-03
iCLASS OEM75 Antenna Cable, 4.5 in [114.3 mm] - For Use With: 3141AD, 3141AC or 3141AE
Higher temperature rated Flat Ribbon Cable - Bare wire connections on both ends
3141-200-09
iCLASS OEM75 Communication Cable - For Use With: 3141AA, 3141AE
Ribbon cable, 2 in [50.8 mm] length, with 8 Position male connectors for connection to OEM75 and host
For SPI or UART communication
228-0077-08
iCLASS OEM75 Communication Cable - For Use With: 3141AA, 3141AE
Ribbon cable, 2 in [50.8 mm] length, with 8 Position male connectors for connection to OEM75 and host
For I2C communication
228-0078-01
iCLASS OEM75 Communication and Power Cable - For Use With: 3141AA, 3141AE
Ribbon cable, 8 in [203.2 mm] length, with 9 Position male connectors for connection to OEM75 and host
For Wiegand or Clock-and-Data communication, power, beeper, LED, hold and reset
228-0074-09
iCLASS OEM75 8 Position Female Connector- For Use With: 228-0074-08
8 Position female connector for use on host board
45-0039-081
iCLASS OEM75 9 Position Female Connector - For Use With: 228-0074-09
9 Position female connector for use on host board
45-0039-092
1
2
Parts can alternatively be sourced through other vendors. Alternate part numbers are 53048-0810 (Molex) and 1734829-8 (Tyco)
Parts can alternatively be sourced through other vendors. Alternate part numbers are 53048-0910 (Molex) and 1734829-9 (Tyco)
NOTE: HID does not source headers that are used for mounting the 3141AD module. The following manufacturers source headers for this module (Cherng Weei & HLCO).
Specific information is held on the OEM75 Developer’s Toolkit USB Drive.
Page 10 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
iCLASS & multiCLASS OEM150 Module
Note: The OEM150 is no longer available for new integration See iCLASS SE Reader Module for new integration projects.
Designed as a fully functional 13.56 MHz or optional dual technology (13.56MHz Contactless Smartcard and 125kHz proximity) contactless smart card Wiegand reader that is easy to use and
embed into third party products. Just connect the appropriate antenna along with the power, data, and control lines to get up and running in no time. Expansion modules are available to enhance
your product offering, to include contactless smartcard read or read/write capability across an RS-232, UART-to-UART, RS-485 or USB communications interface, and when used with an iCLASS
credential; the OEM150 offers security features such as RF data encryption and mutual authentication using 64-bit keys for each iCLASS Application Area. Additional security options include DES
or Triple DES data encryption for the HID Application Area data stored on the iCLASS credential. The multiCLASS OEM150 supports the same iCLASS credential security features as the OEM150.
And provides the integrator a migration path from existing Prox installations to 13.56 MHz iCLASS or just expand credential capabilities to Prox and iCLASS simultaneously, reducing product cost
and time-to-market. Integrators may chose between three (3) separate proximity options that support HID Prox and AWID, Indala Prox or EM4102 Technologies.
Description
Base
Part #
Current
Rev #*
Opt
Hardware Options
Configuration
Settings
iCLASS OEM150 Read Only Module Circuit Card Assembly
Wiegand or Clock-and-Data Output
Dimensions: 2.441 in x 1.102 in x 0.351 in
(6.200 cm x 2.800 cm x 0.890 cm)
3121
B
N
N = None5
00 = Wiegand
01 = Clock-and-Data
00 = None
00 = Wiegand
01 = Clock-and-Data
iCLASS OEM150 Read/Write Module Circuit Card Assembly
3121
B
N
2 = RS232
4 = RS485 (Full-duplex)
M = RS485 (Half-duplex)
U = USB
B = UART
3121
B
N
H = HID AWID Module
D = Indala Proximity Module7
E = EM4102 Proximity Module
6
Wiegand Output
Dimensions: 2.441 in x 1.102 in x 0.351 in
(6.200 cm x 2.800 cm x 0.890 cm)
multiCLASS OEM150 Combination Circuit Card Assembly
HID/AWID, EM4102 or Indala Prox (125 kHz) & iCLASS (13.56
MHz) Read-Only
Multi-technology Module
Wiegand or Clock-and-Data Output
Dimensions: 2.441 in x 1.102 in x 0.351 in
(6.200 cm x 2.800 cm x 0.890 cm)
iCLASS
Security1
0
1
C
D
MIFARE CSN &
EM4102 Wiegand
Output Mode2
Optional U.S.
Government
(FIPS201)
Optional
Custom4
0 1 23 4 5 6 Z
------------7 8 9 A
C D F G HI J3
N/A
------------G3.0
-XXXXY
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 iCLASS Security Options (Factory or Field Configurable) include the following. See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = High Security, Custom, not valid with FIPS201 options (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
C = Standard with Open Collector Tamper enabled
D = Custom with Open Collector Tamper enabled
2 MIFARE Card Serial Number (CSN) and EM4102 Wiegand Output Modes are as follows (Factory or Field Configurable). (SETTING NOT APPLICABLE WITH ELITE ORDERS. ELITE READERS DO NOT READ MIFARE CSN.)
0 = 32 bit
1 = 32 bit reverse (Same as 6055A and 6055BXX0011)
2 = 26 bit
3 = 34 bit
4 = 40 bit
5 = 37 bit
6 = 56 bit
Z = CSN Suppressed Refer to the in iCLASS Reader Wiegand Output Configuration Guide in for more details
EM4102 Output (MIFARE CSN Suppressed)
K = 26 Bit Wiegand M= 34 Bit Wiegand N=40 Bit Wiegand P=42 Bit Wiegand Q=C&D (10 Digit Magstripe) S=32 Bit Wiegand.
3 FIPS201 (USA Government Smart Card) Formats: 7 = 200 bit, 8 = 64 bit, BCD, 9 = 64 bit, REVERSE BCD, A = 40 bit, BCD, C = 40 bit, REVERSE BCD, D = 75 bit GSA, F = HMAC + 200 bit, G = HMAC + 40 bit BCD, H = HMAC + 64 bit BCD,
I = 80 bit combined, J = 32 bit HMAC
For more FIPS201 output information, refer to the output selection guide: http://www.hidcorp.com/pdfs/products/fips201_technote.pdf (For additional outputs, expiration date, GUID, TWIC contact HID for a Command Card).
4 Contact the HID Factory for pricing, availability and minimum order quantity.
5 Expansion Modules Available for Additional Serial Interface Capability
6 All the following communication modules allow host driven communication using the iCLASS Serial Protocol. All the following communication modules (except USB) allow for card ID reporting instantiated by the reader.
For RS-485 (Half-Duplex) compliancy, see iCLASS HADP/OSDP Readers.
Readers that are RoHS compliant (RoHS = Restriction of the use of certain hazardous substances in electrical and electronic equipment) will be appropriately marked on reader and box.
7 Desired Indala format must accompany the order. For FlexEnterprise formats (non-open,) a format authorization must accompany every order.
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 11 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
iCLASS & multiCLASS OEM150 Antenna Part Numbers and Options
Description
Base Part No.
iCLASS/multiCLASS OEM150 13.56 MHz Antenna Circuit Card Assembly. R10 Size
Dimensions: 3.267 in x 1.496 in x 0.062 in (8.300 cm x 3.800 cm x 0.160 cm)
3135
iCLASS/multiCLASS OEM150 13.56 MHz Antenna Circuit Card Assembly. R40 Size
Dimensions: 3.583 in x 2.677 in x 0.062 in (9.800 cm x 6.800 cm x 0.160 cm)
3136
multiCLASS OEM150 125 kHz Proximity Antenna
Dimensions: 2.22 in x 1.43 in x .093 in (5.64 cm x 3.63 cm x .236 cm)
40-0032-03
multiCLASS OEM150 125 kHz Proximity Antenna
Dimensions: 2.56 in x 1.10 in x .050 in (6.50 cm x 2.79 cm x .127 cm)
6500-101-03
Current Rev. No.*
Tuning Options
A
N = Non-Tuned
B
A = Air Tuned
A
N = Non-Tuned
B
A = Air Tuned
iCLASS & multiCLASS OEM150 Expansion Modules for Communication and Proximity Card Support
1
2
3
Description
Base Part
No.
Current
Rev. No.*
Color
Options
Hardware Options
Configuration
Setting A
Configuration
Setting B
iCLASS Communications Expansion Module, RS232 or UART
Dimensions: 1.102 in x 0.886 in x 0.437 in (2.800 cm x 2.250 cm x 1.110 cm)
Protocol: Compliant with iCLASS Serial Protocol
3122
A
N
E = RS232
B = UART
00
00
iCLASS Communications Expansion Module, RS485 (Point-to-Point)
Dimensions: 1.102 in x 0.886 in x 0.437 in (2.800 cm x 2.250 cm x 1.110 cm)
Protocol: Compliant with iCLASS Serial Protocol
3123
A
N
E = Full-Duplex
H = Half-Duplex
00
00
iCLASS Communications Expansion Module, HADP/OSDP (Multi-Drop) 1
Dimensions: 1.260 in x 0.886 in x 0.256 in (3.200 cm x 2.250 cm x .650 cm)
Protocol: Compliant with HADP/OSDP
3123
A
N
M = HADP/OSDP
Half-Duplex
00
00
iCLASS Communications Expansion Module, USB
Dimensions: 1.102 in x 0.886 in x 0.437 in (2.800 cm x 2.250 cm x 1.110 cm)
Protocol: Compliant with iCLASS Serial Protocol
3124
A
N
E = Standard
00
00
iCLASS Proximity (125 kHz) Expansion Module, HID Prox and AWID (Embedded) 2
Dimensions: 1.417 in x 0.886 in x 0.256 in (3.600 cm x 2.250 cm x .651 cm)
Features: Reads HID Prox and AWID cards
3126
B
N
M = Embedded
Connections
00
00
iCLASS Proximity (125 kHz) Expansion Module, Indala Proximity (Embedded) 3
Dimensions: 1.417 in x 0.886 in x 0.276 in (3.600 cm x 2.250 cm x .701 cm)
Features: Reads Indala Proximity Cards
3127
A
N
M = Embedded
Connections
00
00
iCLASS Proximity (125 kHz) Expansion Module, EM4102 Proximity (Embedded)
Dimensions: 1.417 in x 0.886 in x 0.276 in (3.600 cm x 2.250 cm x .701 cm)
Features: Reads EM4102 Proximity Cards
3128
A
N
M = Embedded
Connections
00
00
iCLASS Communication Expansion Module, Hi-O
Dimensions: 1.137 in x 0.886 in x 0.257 in (2.890 cm x 2.250 cm x 0.650 cm)
Protocol: Compliant with Hi-O
3170
A
N
E = Hi-O
00
00
Applies solely to Revision C iCLASS readers and OEM150 Revision B (3121B).
Applies solely to OEM150 Revision B (3121B).
Desired Indala format must accompany the order. For Flex Enterprise formats (non-open), a format authorization must accompany every order.
Page 12 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
iCLASS OEM50 Module
Note: The OEM50 is no longer available for new integration See iCLASS SE Reader Module for new integration projects.
OEM50 - Designed as an extremely compact iCLASS Reader component for the integration into OEM designs supporting 13.56 MHz contactless smart card read/write applications. The OEM50
enables developers to use iCLASS technology for multiple applications including cashless vending, biometrics, time and attendance, alarm system control, HVAC control, process control, point-ofsale terminals, and more. With only an antenna (available through HID), a 2 wire TTL level serial interface and a regulated power supply; the OEM50 easily integrates into a host board or system.
Note: The host provides transient protection, voltage regulatory and output drivers.
Description
Base
Part
No.
Current Rev.
No.*
Color
Options
Hardware
Options
Configuration
Setting1
iCLASS
Security2
MIFARE CSN3
Wiegand Output
Mode
Optional
Custom4
iCLASS OEM 50 Read/Write Module, Read/Write: Circuit Card Assembly,
Wiegand and/or TTL Output - iCLASS data only (no MIFARE CSN)
Dimensions: 1.200 in X 1.100 in X 0.272 in (3.048 cm X 2.794 cm X 0.691 cm)
3131
A
N = None
N=None
00
0
1
C
D
0
-XXXX Y
01
0
1
C
D
0
5
iCLASS OEM 50 Read/Write Module, Read/Write: Circuit Card Assembly,
Wiegand and/or TTL Output - iCLASS data and MIFARE CSN
Dimensions: 1.200 in X 1.100 in X 0.272 in (3.048 cm X 2.794 cm X 0.691 cm)
3131
A
N = None
N=None
1
6
2
Z
3
4
-XXXX Y
iCLASS OEM50 Antenna Part Numbers
Description
Base Part No.
Current Rev. No.
Tuning
iCLASS OEM 50 Antenna, Circuit Card Assembly:
Dimensions: 3.150 in X 3.150 in X 0.062 in (8.001 cm X 8.001 cm X 0.158 cm)
3132
A
A = Air Tuned
N = Not Tuned
iCLASS OEM 50 Antenna, Circuit Card Assembly:
Dimensions: 1.900 in X 1.350 in X 0.062 in (4.826 cm X 3.429 cm X 0.158 cm)
3133
A
A = Air Tuned
N = Not Tuned
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1iCLASS only configuration (00) does not support MIFARE/MIFARE DESFire CSN output
2 iCLASS Security Options (Factory or Field Configurable):
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = High Security, Custom, not valid with FIPS201 options (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
C = Standard with Open Collector Tamper enabled
D = Custom with Open Collector Tamper enabled
See Application Note Number 28 for additional information on Key Management.
3 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable). (This setting is not applicable with Elite orders. Elite readers do not read MIFARE CSN.)
0 = 32 bit
1 = 32 bit reverse (Same as 6055A and 6055BXX0011)
2 = 26 bit
3 = 34 bit
4 = 40 bit
5 = 37 bit
6 = 56 bit
Z = CSN Suppressed
Refer to the iCLASS Reader Wiegand Output Configuration Guide for more details.
4Contact the Factory for pricing, availability and minimum order quantity.
Readers that are RoHS compliant (RoHS = Restriction of the use of certain hazardous substances in electrical and electronic equipment) will be appropriately marked on reader and box.
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 13 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
MIFARE Easy Embedded Readers
The MIFARE Easy embedded readers are a convenient and cost-efficient solution for systems integrators and terminal manufacturers looking
for a secure and scalable solution for use in various general purpose solutions featuring read/write capability, MIFARE Easy reader boards are
designed to be easily integrated into compact terminals or mobile units, making them ideal solutions for use in Automatic Fare Collection
(AFC) ticket vending machines, card validators, card printers, mobile solutions and various general purpose devices.
Model
Description
Part Number
Reader Core
MIFARE Easy Reader
Core, TTL (F/W V1.2)
0701800133-1
Reader Board
MIFARE Easy Reader
Board Compact
(70 x 45 x 12mm), RS-232
(F/W V1.2)
0701800029
Page 14 of 41
Product Image
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
iCLASS SE Processor
The HID iCLASS SE Processor provides secure Key handling and storage for Reader Manufacturers and System Integrators. Provided are
non-door reader solutions to the PACS eco system adding iCLASS and SIO compatibility. In addition, added was support for iCLASS Seos or
NFC-enabled smart phones utilizing iCLASS Seos for a reader design or existing reader infrastructure. As part of the iCLASS SE Platform,
the iCLASS SE Processor is a technology-independent virtualized interpreter that enables reader manufacturers, developers and system
integrators to quickly and easily integrate iCLASS SE and TIP into their devices. This enhances the ecosystem security with a device and
technology independent layer of additional security on top of device-specific security, acting as a digital data wrapper providing additional key
diversification, authentication and encryption.
The iCLASS SE Processor supports iCLASS SE credentials based on different technologies such as iCLASS, iCLASS Elite or MIFARE
Classic and can be configured to support standard iCLASS providing compatibility with existing installations or card deployments. Depending
on the ecosystem requirements, the iCLASS SE Processor allows developers to easily embed it into a new reader design utilizing the surface
mount technology chip, or integrate it into an existing reader design /infrastructure using the convenient pre-packaged ID-1/ID-000 card.
Option
Custom
Suffix
Model
Base
Part #
Rev
11
Security2
iCLASS SE Processor Chip
Surface Mount Device, 5mm x 5mm, 8 Pin DFN
(Dual Flat No-lead)
Tube of 50 Chips
Minimum Order Quantity (MOQ) - 1 Tube3
SE3100
A
0
0 - Standard-V1
2 -Standard-V2
E - Elite
-
xxxxx
iCLASS SE Processor Card
ID-1/000 Card - ID-1 Card with ID-000 punch out
Minimum Order Quantity (MOQ) - 50
SE3110
A
0
0 - Standard-V1
2 -Standard-V2
E - Elite
-
xxxxx
Product Image
iCLASS SE Processor Accessories
Description
Base Part Number
iCLASS SE Processor Chip - Developer Pack of 25 Chips
SE3100A00-SAMPLE
iCLASS SE Processor Card - Developer Pack of 10 Cards
SE3110A00-SAMPLE
Product Image
1Reserved
for future use
Security Options:
0 = Standard Security (Version 1) Keyset - coupled with the Standard 13.56 MHz interpreter provides compatibility with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE
for MIFARE DESFire EV1 credentials.
2= Standard Security (Version 2) Keyset - coupled with the SIO (Only) 13.56 MHz interpreter provides compatibility with iCLASS SE, MIFARE Classic SE and MIFARE DESFire EV1 SE credentials.
E = Elite reads only SE Elite™ credentials with unique matching keys. Works with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 with
matching Elite keys. Line item on PO requires ICE reference number
3 The iCLASS SE Processor Chips are supplied in tubes of 50 pieces and orders must be placed for appropriate number of tubes
2
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 15 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
Product Selector Guide - Gov-ID Applications
13.56 MHz Contactless & Contact Reader Technology
DTK
3134ANH0000
N/A
Embedded Module
identiCLASS DG3300 Reader Core
Features
13.56 MHz Smart Cards, RF and Contact Cards & ICAO Capability
ISO 14443A/B Smart Cards
Interface(s)
USB2.0 PC/SC Drivers
CMOS TTL
Power
USB Bus powered (5 VDC +/- 10% regulated)
5 VDC + or - 10% regulated
Current
220 mA (typical)
300 mA (typical)
90 – 200 mA depending on antenna (without
connected SAM) < 10μA at power down mode
Antenna(s)3
Single External, off the shelf
Integrated and/or up to 2 x External
1 External
Contact Slot
Single external ID-1 or ID-00 Sockets
Single Integrated ID-00 Socket
Single external
Protocol
PC/SC, ISO7816 T=0, T=1
Integration Difficulty
Medium
Medium
Medium
Size
1.6 x 1.6 x 0.34 in
40 x 40 x 8.6 mm
3.4 x 2.8 x 0.36 in
86 x 71 x 9.1 mm
1.0 x 1.18 x 0.19 in
2.0 x 25.5. x 30.0 mm
identiCLASS DG3500 Reader Board
Dual ISO Reader Core
Image
Page 16 of 41
Custom ASCII and Binary Protocol
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
Gov-ID Solutions
identiCLASS Reader Platform
identiCLASS is designed as a universal Gov-ID platform developed to meet the ultimate needs of system integrators. Integrators include
federal, state and local governments and their agencies; manufacturers of e-ID authentication systems and security printers within the area of
contact or contactless solutions. e-Government electronic documents include the following.
•
Electronic Passport
•
Electronic National ID
•
Electronic Driver’s License
The identiCLASS platform provides a space conscious module for mobile solutions and those where minimum footprint is necessary, with
connectivity for an external antenna and optional external SAM. Reader boards also offer embedded antenna plus external antenna
connectivity or enhanced capabilities. Enhanced capabilities include extended antenna cable support with external SAM provision.
Description
3300 Reader Core
13.56MHz ISO14443A/B
13.56MHz ISO15693
USB power
Single external antenna connection
External SAM/Smart Card Socket
Base Part
No
Rev
1*
2*
Optional
Custom
Suffix**
DG3300
A
0
0
-
DG3500
A
0
0
-
Product Image
Dimensions: 40mm x 40mm x 8.6 mm
1.6 in x 1.6 in x 0.34 in
3500 Reader Board
13.56MHz ISO14443A/B
13.56MHz ISO15693
USB power with single integrated antenna
Two external antenna connections
Onboard SAM socket
Dimensions: 86mm x 71mm x 9.1mm
3.4 in x 2.8 in x 0.36 in
* These fields are reserved for future use and currently have no options available.
** The Custom Suffix is used to identify special versions for specific customers.
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 17 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
identiCLASS Antennas
Description
Part No
ID1 Antenna
Includes 10cm antenna cable. Part no: P/N 4091A01.
Molex connectors for connection to identiCLASS Reader
Core identiCLASS Reader Board
Product Image
4090A01
Dimensions: 85.6mm x 54mm (3.37 in x 2.13 in)
ID3 Antenna
Includes 10cm antenna cable. Part no: P/N 4091A01.
Molex connectors for connection to identiCLASS Reader
Core and identiCLASS Reader Board.
4090A02
Dimensions: 149mm x 115mm (5.87 in x 4.52 in)
identiCLASS Accessories
Description
Part No
Antenna Cable - 10cm (pack of 10)
Molex connectors for connection to identiCLASS Reader Core and
identiCLASS Reader board.
4091A01
Smart Card Adapter - Full Smart Card Size
Includes 15cm Smart Card adapter cable. part no: 4091A04
Connect to identiCLASS Reader Core and identiCLASS Enhanced
Reader board.
4093A01
Smart Card Adapter - SIM Card Size
Includes 15cm Smart Card adapter cable. Part no: 4091A04
Connect to identiCLASS Reader Core and identiCLASS Enhanced
Reader board.
Product Image
4093A02
Smart Card Adapter Cable - 15cm (pack of 10)
4091A04
Page 18 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
Dual-ISO Embedded Reader
The Dual-ISO reader Core is a contactless proximity read/write device that, with its interoperability capability supports various ISO14443A and
ISO14443B RFID-devices, including the whole MIFARE family. The module requires an external application specific antenna to operate. An
integrated SAM Interface enables a state of the art security level. This RFID read/write unit is optimized for maximum data throughput rates on
both, the air interface as well as the serial interface. The built in boot-loader enables firmware field upgrades through the serial interface.
Model
Description
Part Number
Dual-ISO Reader Core
Dual-ISO Reader Core, TTL (F/W 2.2)
0701800134-1
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Product Image
Page 19 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
Product Selector Guide - Cashless Payment
13.56 MHz Contactless & Contact Reader Technology
DTK
N/A
3134ANJ0000
Embedded
Module
OMNIKEY 5121-PAY
veriCLASS VP3300
Reader Core
Features
iCLASS, MIFARE & Contact
USB with PC/SC
13.56 MHz Smart Cards,
RF and Contact Payment Cards & NFC
13.56 MHz Smart Cards,
RF and Contact Payment Card
Interface(s)
USB 2.0 PC/SC Drivers
UART & USB2.0 PC/SC Drivers
CMOS TTL
Power
USB Bus Powered
3 to 5 VDC +/- 10% regulated
5 VDC + or - 10% regulated
Current
USB Bus Powered
200 mA (typical)
@ 5 VDC
370 mA (typical)
@ 5 VDC
Antenna(s)3
Integrated on Board
Single External
Integrator must develop
Contact Slot
1 x Integrated ID-1 Slot
Supports up to 4 external
sockets
Protocol
PC/SC, ISO7816 T=0,
T=1 , EMVCo CL
PC/SC, EMVCo and Calypso®, ISO7816 T=0, T=1
Custom ASCII and Binary Protocol
Integration
Difficulty
Easy
Difficult
“SMT Board, Antenna
Development”
Medium
“Integrated Antenna, 2x
ID-000 sockets”
Medium
2.6 x 2.16 x 0.43 in
66 x 55 x 11 mm
2.244 x 2.165 x 0.169 in
57 x 55 x 4.29 mm
3.5 x 3.5 x 0.36 in
90 x 90 x 9.2 mm
1.0 x 1.18 x 0.19 in
2.0 x 25.5. x 30.0 mm
N/A
veriCLASS VP3500
Reader Board
Multi-ISO Reader Core
Multi-ISO Reader Board
Image
Size
Page 20 of 41
RS-232
90 - 200 mA
depending on antenna
(without connected SAM)
< 10 μA at power down mode
< 150 mA (without SAM)
< 10 mA at power down mode
Single Integrated
Single External
Integrator must develop
Single Integrated
2 x Integrated ID000
Sockets
Support for single external socket
1 x integrated ID-000 socket
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
2.76 x 1.77 x 0.48 in
70.0 x 45.0 x 12.1 mm
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
Cashless Payment Solutions
veriCLASS - Payment and Ticketing Reader Platform
veriCLASS is an embedded reader platform comprising of a complete line of interoperable contactless reader boards and modules for
payment and ticketing applications.
•
Supports multiple contactless technologies and credentials such as:
FeliCa™, iCLASS, MIFARE, DESFire, NFC, ISO 14443 A/B, and ISO 15693
•
Supports multiple contactless payment communication protocols, such as:
Calypso, MasterCard® PayPass™, Visa® payWave, American Express® ExpressPaySM
•
Supports both open- and closed loop payment schemes
•
Pre-certified to both FCC modular and CE standards
•
Comprehensive Developer Tool Kit accelerates design-in cycles and speeds products to market
Base Part
No
Description
Rev
12
Optional
Custom
Suffix3
22
Product Image
veriCLASS 3300 Reader Core
13.56MHz ISO14443A/B
13.56MHz ISO15693
Up to Two external antennas
Up to four External SAM/Smart Card Sockets
Dimensions :
55mm x 57mm x 4.2 mm (2.17 in x 2.24 in x 0.17 in)
Minimum Order Quantity (MOQ) - 601
veriCLASS 3500 Reader Board
13.56MHz ISO14443A/B
13.56MHz ISO15693
Single Integrated Antenna
Two integrated ID000 SAM Sockets
Dimensions :
90 mm x 90 mm x 9.2 mm (3.5 in x 3.5 in 0.36 in)
Minimum Order Quantity (MOQ) - 304
VP3300
A
0
0
-
VP3500
A
0
0
-
Order the veriCLASS VP3300A00 Reader Core in multiples of the MOQ. The Reader cores are supplied in bulk sealed vacuum packaging which is utilized to ensure compliance with Solder Profile
J-STD-020C.
2 These fields are reserved for future use and currently have no options available.
3 The Custom Suffix is used to identify special versions for specific customers.
4 Order the veriCLASS VP3500A00 Reader Board in multiples of the MOQ. The Reader Boards are bulk packed in protective trays to avoid damage during transit.
1
veriCLASS Accessories
Description
Base Part Number
veriCLASS Reader Core Sample - Additional samples for integration verification maximum of 3 units per order
VP3300A00-SAMPLE
veriCLASS Reader Board Sample - Additional samples for integration verification
- maximum of 3 units per order
VP3500A00-SAMPLE
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Product Image
Page 21 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
Multi-ISO - Embedded Reader Family
The family of 13.56MHz Multi-ISO Reader Boards supports one of the broadest ranges of transmission protocols and transponder ICs
available on the market. Featuring integrated SAM support that enables state of the art security the highly interoperable reader boards support
a wide range of industry standards including ISO 14443A/B, ISO 15693, ISO 18000-3 and EPC allowing the reader to be easily used for public
transport, financial transaction and many other applications. The reader board is also optimized for maximum data throughput times on both
the air and serial interface, and is available with a variety of antenna size options for easy integration in virtually any mobile or compact
application.
Model
Description
Part Number
Multi-ISO Reader Core
Multi-ISO Reader Core, (F/W V1.2)
0701800159-1
Multi-ISO Reader Board
Multi-ISO Reader Board, RS-232 (F/W V1.2)
0701800160
Product Image
OMNIKEY 5321-PAY
The OMNIKEY 5321 PAY is an easy-to-use reader board for integration into kiosk or terminal applications within the contactless payment
world. This extends HID Global’s solid cashless payment portfolio which includes Automatic Fare Collection and banking solutions.
The OMNIKEY 5321 PAY represent the ideal combination of contactless technology and security support through a SIM-sized card in a single
device for contactless payments. Easy to install through an USB connection, the devices economically support payment environments where
EMVCo-compliant contactless smart card technology is used.
Model
Description
Part Number
5321-PAY Reader Board
OK 5321 PAY Reader Board (FW1.75) [V2.0] Ext.
Cable (180cm)
R53210041
Page 22 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Product Image
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
Product Selector Guide - Logical Access/PC Applications
13.56 MHz Contactless & Contact Reader Technology
DTK
3134ANG0000
3134ANL0000
Embedded
Module
OMNIKEY 5121 & OMNIKEY 5321
OMNIKEY 5127 CK
Features
iCLASS, MIFARE & Contact
USB with PC/SC
HID Prox, iCLASS, MIFARE & DESFIRE EV1 CCID
& Key Board Wedge
Interface(s)
USB 2.0 PC/SC Drivers
USB 2.0 CCID & Key Board Wedge
Power
USB Bus Powered
USB Bus Powered
Current
USB Bus Powered
USB Bus Powered
Antenna(s)3
Integrated on Board
Integrated on Board
Contact Slot
1 x Integrated ID-1 Slot
None
Protocol
PC/SC,
ISO7816 T=0, T=1 &
HID Custom for iCLASS
PC/SC (ready for 2.01, in CCID mode), Human Interface Device (in
Keyboard Wedge Mode)
Integration
Difficulty
Easy
Easy
Size
5121
2.6 x 2.16 x 0.43 (in) 66 x 55 x 11 (mm)
5321
3.1 x 2.6 x 0.3 (in) 96 x 78 x 8 (mm)
2.6 x 2.2 x 0.35 (in)
66 x 56 x 9 (mm)
Image
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 23 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
Logical Access/PC Applications
OMNIKEY Readers
OMNIKEY Embedded Readers are designed to enable integrators to build solutions for contact and contactless security, loyalty and
government applications. They are ideal devices for organizations that need to integrate a highly secure contact and/or contactless PC
connected smart card reader board, which in turn enables end-users to use advanced security applications to experience the convenience of
contactless technology. The OMNIKEY Embedded Readers were developed as an easy design-in device; just mount the reader board in the
product away from metal, connect the USB interface, build an application based on the PC/SC, CCID or Keyboard wedge standard and you
are up and running in no time
Model
Description
Part Number
OK 5x27 CK contactless CCID and Keyboard
Wedge Reader Board
R51270001-1
R51270001-V2
R51270001-Elite
R51270001-Indala
R51270001-V2-Indala
R51270001-Elite-Indala
5427 CK Reader
OK 5427CK contactless CCID and Keyboard
Wedge Housed Reader
R54270001-CON
R54270001-CON-V2
R54270001-CON-Elite
R54270001-CON-Indala
R54270001-CON-V2-Indala
R54270001-CON-Elite-Indala
5121 Reader Board
OK 5121 contact and contactless reader board
R51210049-2
5321 Reader Board
OK 5321 contact and contactless reader board
R53210015-2
5321 CL SAM Reader Board
OK 5321 CL SAM contactless with SAM reader
board
R53210033-2
5321 CL SAM Reader Board TAA
OK 5321 CL SAM contactless with SAM reader
board TAA
R53210038-3
3111 Reader Board
OK 3111 Contact Smart Card Reader Board with
Serial Interface
R31110018 (with Cable)
R31110022-1 (without Cable)
3121 Reader Board (Landing
Contacts)
OK 3121 Contact Smart Card Reader Board
(Landing Contacts) with USB Interface
R31210073-1
3121 Reader Board
OK 3121 Contact Smart Card Reader Board with
USB Interface
R31210075-1 (with Cable)
R31210129 (without Cable)
3921 Reader Board
OK 3921 Contact Smart Card Reader Board
(floppy drive bay) with USB Interface
R39210011-1 (Internal Cable)
R39210013-1 (External Cable)
R39210014-1 (without Cable)
5125 Reader Board
OK 5125 125kHz Contactless Reader Board with
USB Interface
R51250018-1 (with Cable)
R51250017-1 (without Cable)
5127 CK Reader Board
Product Image
*TAA stands for Trade Agreements Act of 1979. The TAA is an Act of Congress that governs trade agreements negotiated between the United
States and other countries and provides a list of countries in which United States institutions may purchase devices.
Page 24 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
OMNIKEY Embedded Technology Chipsets
Description
Base Part Number
OMNIKEY Smart@Link Chipset (FW2.03)
USB & Serial Support
Pre-certified (EMV2000, CCID,HBCI)
32-pin VQFP chip
Standard MOQ 2,500 pieces1
C30210010
OMNIKEY Smart@Link Chipset (FW2.03)
USB & Serial Support
Pre-certified (EMV2000, CCID,HBCI)
32-pinQFN32 chip
Standard MOQ 2,600 pieces2
C30210016
1Supplied
2Supplied
Product Image
in vacuum packed in trays of 250 pieces (10 trays). Order in multiples of MOQ only - For quantities less than the MOQ or multiples thereof an additional packing fee is applicable.
in vacuum packed in trays of 260 pieces (10 trays). Order in multiples of MOQ only - For quantities less than the MOQ or multiples thereof an additional packing fee is applicable.
OMNIKEY Smart@Link Chipset Accessories
Description
Base Part Number
Smart@Link (FW2.03) Demo Kit Chipset (VQFP32: 3 Chips in 1 box
C30210009
Smart@Link (FW2.03) Demo Kit Chipset (QFN32: 3 Chips in 1 box
C30210020-1
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 25 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
Product Selector Guide - 125 kHz Proximity Reader Technology
Embedded Reader Selector Chart- 125kHz Proximity Reader Technology
DTK
3134BNC0000
3134AND0000
3134ANE0000
3134CNB0000
Embedded
Module
MCM
ProxPoint® Plus
eProx Lock
OEM1501
Features
HID Prox:
Board Mounted Component
HID Prox:
Full Prox Reader Capabilities - Just Connect and Go
HID Prox:
Low Power Operational Mode for Battery
applications
iCLASS & HID Prox, Indala or EM Prox
Interface(s)
Wiegand
Clock-and-Data
Wiegand
Clock-and-Data
Wiegand
Clock-and-Data
F2F
Wiegand
Clock-and-Data
Power
+4.5 - 5.5VDC
Voltage Regulation
+5 - 16VDC
4 - 10VDC
(4 or 6 x 1.5V AA or 1 x 9V Battery / Line Power)
+5 - 16VDC
Current
<150 mA
<100 mA
<30µA During Sleep
<80mA during 250ms Card Read
<100 mA
Integration
Difficulty
Difficult
Easy
Medium
Easy
Size
0.85 x 0.85 x 0.16 (in)
21.59 x 21.59 x 4.06 (mm)
2.3 x 1.4 x 0.311 (in)
58.4 x 35.6 x 7.9 (mm)
1.3 x 1.7 x 0.281 (in)
33.02 x 43.18 x 7.13 (mm)
2.441 x 1.102 x 0.611 (in)
62 x 28 x 15.5 (mm)
Image
1 USGSA
FIPS201 (PIVII) Approved
Page 26 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
125 kHz Contactless Embedded Reader Module Ordering
ProxPoint Plus - The HID ProxPoint Plus OEM Module is a full-featured HID Proximity reader board that provides access to the industry’s largest 125 kHz contactless card
population. Ideal for OEM application developers who need to interface to HID proximity cards to implement third-party applications, ProxPoint Plus is HID Global’s first proximity OEM
Module that comes fully equipped with beeper, LED and stock antenna to deliver full reader functionality. Simple interface and installation allows OEM applications access to all HID
proximity card formats, including both short and long card formats.
eProx MCM - The Multi-Chip Module (MCM) provides the functions of an HID proximity reader on a single integrated circuit. The Prox by HID technology easily integrates to an
existing electronic module and is able to be surface mounted to an existing PCB. The MCM enables adding RFID technology to a wide array of electronic devices, including alarm
panels, electronic door locks, biometric readers, logical access devices and process control equipment.
eProx Lock - With its small size and low power consumption, the eProx Lock can provide a keyless, card-activated lock. The module offers Wiegand, F2F and Clock-and-Data output
configurations. It also recognizes card formats up to 85 bits, with over 137 billion unique codes
Card Reader Description
Base Part
No.
Current Rev.
No.*
Module Options
Hardware Options
Multi Chip Module (MCM)4
4025
A
1 = None
105 = Wiegand w/ Standard-Start-up
205 = Clock-and-Data w/ Standard Start-up
401 = Wiegand w/ Quick Start-up (Quick start disabled)6
402 = Wiegand w/Quick Start-up (Quick start enabled)
eProx Lock Module
4041
A
N = None
N = None
00 = Wiegand output 02 = F2F Output
04 = Clock & Data output
XXXX Y
A = Beeper with LED
N = None
T = Terminal Strip
00
04
XXXX Y
C
B = Beeper without LED
L = No Beeper with LED
N = No Beeper without LED
N = None
T = Terminal Strip
00
XXXX Y
A
L = Board only
A = Board & Antenna³
N = None
No beeper option with this Module.
LED Options:
00 (Default)
03
05
07
XXXX Y
ProxGuts™ Module
with Wiegand output
with Clock and Data output
4035
4038
ProxPoint OEM Module5
with Wiegand output
with Clock and Data output
4065
4068
Configuration Setting Options¹
01
05
02 03
06 07
Custom²
XXXX Y
ProxPoint Plus OEM Module5
LED/Beeper Options:
4065
L = Board only
N = LED Only
B
with Wiegand output
00 01 02 03
XXXX Y
4068
A = Board & Antenna³
B = LED and Beeper
with Clock and Data output
04 05 06 07
*Revision numbers and availability are subject to change without notice. Some product may require a signed Non-Disclosure agreement.
1 Configuration Setting Options for ProxGuts & ProxPoint OEM Modules are as follows (factory programmed):
00 = Beep on, LED normally red, reader flashes green on tag read
01 = Beep off, LED normally red, reader flashes green on tag read
02 = Beep on, LED normally off, reader flashes green on tag read
03 = Beep off, LED normally off, reader flashes green on tag read
04 = Beep on, LED normally red, host must flash green
05 = Beep off, LED normally red, host must flash green
06 = Beep on, LED normally off, host must flash red and/or green
07 = Beep off, LED normally off, host must flash red and/or green
2 Consult the factory for lead times and availability - for AWID read capability use BXN01.
3 OEM module board and antenna are shipped disconnected.
4 Multi Chip Modules (MCM) are packaged in multiples of 25 or 100 pieces. Minimum order quantity is 100 pieces; orders will be accepted in multiples of 25 or 100 pieces thereafter.
5 Only pre-existing ProxPoint customers can order the ProxPoint OEM Module Revision A (4065A and 4068A). All new customers looking to embed HID Proximity technology with a ProxPoint solution must order the
ProxPoint Plus OEM Module Revision B (4065B and 4068B).
Note: Quick Start is disabled by default and must be enabled through a configuration card.
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 27 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
125 KHz Embedded Reader Module Antennas
HID 125 kHz Antennas
40-0008-01
125 kHz, Air Tuned Antenna, 3.75 x 1.20 in (9.25 x 3.05 cm), use with eProx Lock
40-0032-02
125 kHz, Air Tuned Antenna, 2.22 x 1.43 in (5.64 x 3.63 cm), use with ProxPoint OEM & MCM
Multi-tag Embedded Reader
Model
Description
Part Number
Reader Core
Multi-tag 125 / 134.2kHz low frequency OEM Reader
Core
0701800013
Product Image
Indala Proximity
OMR Module Ordering Guide
FP5110
OMR-705+
FP5120
OMR-705+, Board w/ antenna
FP5130
OMR-705+, Board w/o antenna
Page 28 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
13.56 MHz Contactless Embedded Transponder Ordering
207 - iCLASS eUnit Ordering Guide Part Numbers and Options
The iCLASS eUnit Contactless Smart Embedded Tag offers read/write capability.
There is a Minimum order of 100 units, and thereafter in multiples of 25.
Ensure selecting the appropriate choices and completing the full order form.
207 Base Model
0.012 in
[0.3 m m ]
iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas
1 - 16k Bits (2k Bytes) with 2 Application Areas
2 - 16k Bits (2k Bytes) with 16 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
0.100 in
[2.5 m m ]
Programming (Check One)
C - Configured, Non-Programmed iCLASS. Programming Information Not Required.
P - Programmed iCLASS. Specify Programming Information.
Coil Option
N - Max Diameter: 0.749 in (19.0 mm) / Max Thickness: 0.012 in (0.3 mm)
Packaging Option
N - None
Tag Numbering
N - None
Hardware Option
0.749 in
[19.0 mm ]
N - None
Enter your final card options from check boxes above. Example: 2071PNNNN
Final Part Number
207
N
N
N
N
iCLASS eUnit Programming Information
Bit Numbers
(example: 26 bit)
Format Number
(example: H10301)
Facility Code
(Custom Formats) Site Code
City Code
Internal Card No. Start
Stop
External Card No. Start
Stop
PIN (2-12 digits):
Sequential: Start #
Special Instructions:
January 2014
OEM Code
. Random: Length
.
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 29 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
1439/1449 - MIFARE eUnit Ordering Guide Part Numbers and Options
There is a Minimum order of 100 units, and thereafter in multiples of 25.
Ensure selecting the appropriate choices and completing the full order form.
1439 (1K) Base Model
1449 (4K) Base Model
Programming (Check One)
N - Non-Programmed (13.56 MHz). Programming Information Not Required.
Coil Option
N - 827 in (21 mm) Round Coil, Lead Frame Chip Mount (only available in 4K model)
B - .570 in (14.5 mm) Round Coil, Lead Frame Chip Mount (only available in 1K model)
Packaging Option
N - None
Tag Numbering
N - No External Tag Numbering
Hardware Option
N - None
Enter your final Tag options from check boxes above. Example: 1439NBNNN
In this example selected is MIFARE, non-programmed, .570 in (14.5mm) coil, no packaging, no external number, no hardware.
Final Part Number
N
N
N
N
Size Table
Packaging Option N - Bare Coil
Coil Option
Max Diameter
Max Thickness
N
B
.827 in (21 mm)
.570 in (14.5 mm)
.006 in (0.15 mm)
.009 in (0.22 mm)
13.56 MHz Tag Programming Information
Bit Numbers
(example: 26 bit)
Format Number
(example: H10301)
Facility Code
(Custom Formats) Site Code
City Code
Internal Tag No. Start
Stop
Special Instructions:
Page 30 of 41
OEM Code
.
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
1453 - MIFARE DESFire EV1 eUnit Ordering Guide Part Numbers and
Options
There is a Minimum order of 100 units, and thereafter in multiples of 25.
Ensure selecting the appropriate choices and completing the full order form.
1453 (MIFARE DESFire EV1) Base Model
MIFARE DESFire EV1 Memory Size
C - MIFARE DESFire EV1 8K-Bytes
Programming (Check One)
N - Non-Programmed (13.56 MHz). Programming Information Not Required.
Coil Option
N - .570 in (14.5 mm) Round Coil, Lead Frame Chip Mount
Packaging Option
N - None
Tag Numbering
N - No External Tag Numbering
Hardware Option
N - None
Enter your final Tag options from check boxes above. Example: 1453CNNNNN
In this example selected is DESFire EV1, non-programmed, .570 in (14.5mm) coil, no packaging, no external number, no hardware.
Final Part Number
1453
C
N
N
N
N
N
Size Table
Packaging Option N - Bare Coil
Coil Option
Max Diameter
Max Thickness
N
.570 in (14.5 mm)
.009 in (0.3 mm)
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 31 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
125 KHz Contactless Embedded Transponder Ordering
1390 - eProx Tag Embedded Proximity Part Numbers and Options
Ensure selecting the appropriate choices and completing the full order form.
There is a minimum order of 100 units, and thereafter in multiples of 25.
1390 Base Model
Programming (Check One)
Thickness (t)
L - Programmed, Low Frequency (125 kHz). Specify Programming Information.
N - Non-Programmed, Low Frequency (125 kHz). Programming Information Not Required.
Coil
N - Standard, .866 in (22mm) Round Coil, PCB or Lead frame Chip Mount
A - .984 in (25 mm) Round Coil, Direct Connect Chip
B - .677 in (17 mm) Round Coil, Direct Connect Chip
Packaging
N - None (Bare Coil)
C - Clear Tag, Clear Polyester Covering
Tag Numbering
N - No External Tag Numbering
Diam eter (ø)
Hardware Option
N - None
Enter your final Tag options from check boxes above. Example: 1390NNNNN
Final Part Number
1390
N
N
Size Table
Packaging Option N - Bare Coil
Packaging Option C - Clear Tag
Coil Option
Max Diameter
Max Thickness
Max Diameter
Max Thickness
N
0.866 in (22 mm)
0.033 in (0.8 mm)
NA
NA
A
0.984 in (25 mm)
0.015 in (0.39 mm)
1.200 in (30.5 mm)
0.031 in (0.8 mm)
B
0.677 in (17.2 mm)
0.015 in (0.39 mm)
0.886 in (22.5 mm)
0.031 in (0.8 mm)
E
NA
NA
0.807 in (20.5 mm)
0.031 in (0.8 mm)
125 kHz Tag Programming Information
Bit Numbers
(example: 26 bit)
Format Number
(example: H10301)
Facility Code
(Custom Formats) Site Code
City Code
Internal Tag No. Start
Stop
Special Instructions:
Page 32 of 41
OEM Code
.
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
Appendix A - Development Tool Kits
Development Tool Kits
3134ANG0000
OMNIKEY 5x21 Board Development Tool Kit
3134ANH0000
identiCLASS Development Tool Kit
3134ANJ0000
veriCLASS Development Tool Kit
3134ANK0000
SIO Processor Development Tool Kit
3134ANL0000
5127 CK Development Tool Kit
3134BNC0000
MCM2 Development Tool Kit
3134AND0000
Prox Point Plus Development Tool Kit
3134ANE0000
eProx Lock Development Tool Kit
3134ANM0000
iCLASS SE Reader Module Development Tool Kit
OMNIKEY 5x21 - 3134ANG0000
Part List
Developer Tools
1 - USB Flash Drive
Reader and Reader Boards
1 - OMNIKEY 5321 Reader
1 - OMNIKEY 5321 Reader Board
1 - OMNIKEY 5121 Reader Board
1 - OMNIKEY 5121 Reader Board Holder
Access Cards
6 - Non-Programmed MIFARE 1K Cards
6 - Programmed 32K iCLASS Cards (16K/2 + 16K/2 and 16K/16 + 16K/1)
3 - Non-Configured 32K iCLASS Cards
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 33 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
iCLASS SE Reader Module - 3134ANM0000
Part List
Developer Tools
1 - USB Flash Drive (Drivers, Software, Documentation, Release Notes)
Reader Boards & Accessories
1 - iCLASS SE Reader Module Development Board
1 - SE3200AP0 iCLASS SE Reader Module
1 - SE3210AP0 iCLASS SE Reader Module
1 - 4090A10 iCLASS SE Reader Module Antenna
1 - 4090A11 iCLASS SE Reader Module Antenna
1 - 6500-101-03 Low Frequency Antenna
1 - 4091A10 SE3200 antenna cable
1 - 4091A11 SE3210 antenna cable
1 - USB Cable
1 - USB to RS-232 serial cable
2 - Configuration Cards
Sample Credentials
1 - iCLASS SR 2k/2
1 - iCLASS SR 32k (16k/2 + 16k/1)
1 - iCLASS SR 32k (16k/16 + 16k/1)
1 - iCLASS SE 2k
1 - iCLASS SE 32k (16k/2 + 16k/1)
1 - iCLASS SE 32k (16k/16 + 16k/1)
1 - Seos 16k
1 - MIFARE Classic 4k HID MIFARE
1 - MIFARE Classic 4k SE
1 - MIFARE DESFire EV1 8k SE
1 - HID ISO Prox II
Page 34 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
identiCLASS - 3134ANH0000
Part List
Developer Tools
1 - USB Flash Drive (Drivers, Software, Documentation, Release Notes)
Reader Boards & Accessories
1 - identiCLASS 3300 Reader Core
1 - identiCLASS 3500 Reader Board
1 - ID-000 Smart Card Adapter
1 - ID-1 Smart Card Adapter
2 -15cm Smart Card Adapter Cable
1 - ID-1 Antenna (Standard)
1 - ID-3 Antenna (Standard)
2 -10cm Antenna Cable (Standard)
1 - USB Cable
Sample Credentials
1 - Sample e-passport
1 - Sample Dual-Interface Card (National ID Card)
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 35 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
veriCLASS - 3134ANJ0000
Part List
Developer Tools
1 - USB Flash Drive (Drivers, Software, Documentation, Release Notes)
Reader Boards & Accessories
1 - veriCLASS Development Board
1 - veriCLASS VP3300 Reader Core
1 - veriCLASS VP3500 Reader Board
2 - Development Board Antennas (100mm diameter)
1 - RS-232 serial cable
1 - USB cable
2 - Antenna Cables (MCX connectors)
1 - Universal power supply (with UK, US & EU adapters)
Sample Credentials
1 - MIFARE DESFire 0.6 Card
1 - MIFARE Plus Card
1 - MIFARE DESFire EV1 Card
1 - MIFARE Ultralight® Card
1 - MIFARE Ultralight C Card
1 - MIFARE Classic Card
1 - iCLASS Card
1 - Calypso Card
1 - FeliCa
1 - Sample Payment Card
1 - Sample dual-interface credential JCOP 31 card
Page 36 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
OMNIKEY 5x27CK - 3134ANL0000
Parts
Developer Tools
1 - USB Flash Drive (Drivers, Software, Documentation, Release Notes)
Reader Boards & Accessories
1 - 5127CK Reader Board
1 - 5427CK Reader
Sample Credentials
1 - MIFARE Classic 1K Card
1 - MIFARE DESFire EV1 Card
1 - iCLASS 16K/16 Card
1 - HID ISOPROX II Card
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 37 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
iCLASS SE Processor - 3134ANK0000
Parts
Developer Tools
1 - USB Flash Drive (Drivers, Software, Documentation, Release Notes)
Reader Boards & Accessories
1 - 5321 Desktop reader
5 - 3110A00 ID1/000 iCLASS SE Processor Card
10 - 3100A00 iCLASS SE Processor Chip
Sample Credentials
3 - iCLASS SE Card 2k
3 - iCLASS SE Card 16K/16
3 - iCLASS SE Card 32K
Page 38 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
MCM - 3134BNC0000
Parts
Developer Tools
1 - USB Flash Drive
Multi-Chip Reader Modules
3 - MCM
Access Cards
3 - ISOProx II Cards
3 - Microprox Tags
3 - Proxkey II Cards
3 - Multi-technology HID Prox & iCLASS 16K/16 Programmed Cards
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 39 of 41
Embedded Technology Solutions How to Order Guide - D00551, B.2
ProxPoint Plus - 3134AND0000
Parts
Developer Tools
1 - USB Flash Drive
Reader Boards
2 - ProxPoint Plus Modules with Antenna
Access Cards
3 - ISOProx II Cards
3 - Microprox Tags
3 - Proxkey II Cards
3 - Multi-technology HID Prox & iCLASS 16K/16 Programmed Cards
Page 40 of 41
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
January 2014
Embedded Technology Solutions How to Order Guide - D00551, B.2
eProx Lock - 3134ANE0000
Parts
Developer Tools
1 - USB Flash Drive
Reader Modules
2 - eProx Lock Modules
Antennas
2 - 125 kHz Prox Air-Tuned Antennas
Access Cards
3 - ISOProx II Cards
3 - Microprox Tags
3 - Proxkey II Cards
3 - Multi-technology HID Prox & iCLASS 16K/16 Programmed Cards
January 2014
© 2012-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 41 of 41