Document 199850

How
to Measure
Guide
CORSA
- How To Measure
CORSA
- Howillustrate
To Measure
The
following diagrams
the measurements we will need from you when ordering thru-hull exhaust components such as diverters
or complete
muffler systems.
ordering easier,
also
havefrom
the following
ready when
you call:
Your boat such
year, as
make and
The following
diagrams
illustrate To
themake
measurements
we will
need
you wheninformation
ordering thru-hull
exhaust
components
CORSA
-size,
How
To
Measure
model,
(Mercury,
Volvo, OMC),
drive
model easier,
and is italso
an EFI
or the
carbureted
engine.
diverters
or engine
complete
muffler
systems.
To make
ordering
have
following
information ready when you call: Your boat
The following diagrams illustrate the measurements we will need from you when ordering thru-hull exhaust components such as diverters
year, or
make
and model,
size,
Volvo,easier,
OMC),also
drive
model
and is it information
an EFI or carbureted
complete
muffler engine
systems.
To(Mercury,
make ordering
have
the following
ready whenengine.
you call: Your boat year, make and
Under
Swim
Platform
Applications
The
following
diagrams
illustrate
the
measurements
we
will
need
from
you
when
ordering
thru-hull
exhaust components such as diverters
model, engine size, (Mercury, Volvo, OMC), drive model and is it an EFI or carbureted engine.
or complete muffler systems. To make ordering easier, also have the following information ready when you call: Your boat year, make and
For boats
withsize,
built(Mercury,
in or bolt-on
platforms
thatand
DOisNOT
currently
have thru-hull
model,
engine
Volvo,swim
OMC),
drive model
it an EFI
or carbureted
engine. exhaust, the following measurements
Under
Swim
Platform
Applications
will
determine
if there
is enough space
under the swim platform to install a standard system or if a custom system will be
required.
Under
Swim
Applications
For boats
with in
built
in or bolt-on
platforms that DO NOT currently have thru-hull exhaust, the following measurements
For boats
with built
or Platform
bolt-on
swim swim
platforms
will
determine
if
there
is
enough
space
under the swim platform to install a standard system or if a custom system will be
that are not equipped
with measured
thru-hull exhaust,
Distance
from
the
top of thethat
driveDO NOT currently have thru-hull exhaust, the following measurements
For boats with built in or bolt-on swim platforms
required.measurements
the following
will
determine
if
(gimbal)
housing
to
the
underside
theswim platform to install a standard system or if a custom system will be
will determine if there is enough space underofthe
swimunder
platform.
thererequired.
is enough space
the swim platform
Distance measured from the top of the drive
to install a standard system or if a custom system
(gimbal) housing to the underside of the
will be required. Distance
measured from the top of the drive
swim platform.
(gimbal) housing to the underside of the
platform.
Distance
measured
from
center
Distanceswim
measured
from the
topthe
of vertical
the
line of the drive (gimbal) housing to the
drive (gimbal) housing to the underside
upper corner of the drive cavity. For bolt-on
of the swim
platform.
Distance
measured
from the
the distance
vertical center
swim
platforms,
measure
to the
line
of
the drive
(gimbal) housing to the
first mounting
bracket.
Distance
measured
vertical
upper corner
of the from
drivethe
cavity.
Forcenter
bolt-on
line
of platforms,
the drive (gimbal)
housing
to the to the
swim
measure
the
distance
Distanceupper
measured
vertical
cornerfrom
ofbracket.
thethe
drive
cavity.center
For bolt-on
first mounting
line of the
drive
(gimbal)
housing
the
swim
platforms,
measure
thetodistance
to the
Also applies
Twin
Engine
applications.
first
mounting
bracket.
upper to
corner
of
the drive
cavity. For bolt-on
swim platforms, measure the distance to
the first
mounting
bracket.
When
measuring
distances on a
Also applies
toNOTE:
Twin Engine
applications.
built in swim platform, measure to the
Also applies to tangent
Twin Engine
of theapplications.
radius as shown in the
NOTE: When measuring distances on a
illustration.
NOTE: When measuring distances on a built in
built in swim platform, measure to the
swim platform, measure
to
ofshown
the in the
NOTE:
When
measuring
distances
on a
tangent
ofthe
thetangent
radius as
swim platform,
radius as shown inbuilt
the in
illustration
to themeasure
right. >to the
illustration.
Under Swim Platform Applications
A
A
B
A
A
B
B
B
tangent of the radius as shown in the
illustration.
Also applies to Twin Engine applications.
Location of Existing Exhaust Holes
For boats that currently DO HAVE thru-hull exhaust, the following measurements will determine if the exhaust holes are in the standard
Location
Existing
Holes
location
for your of
particular
motor or Exhaust
if a custom system
will be needed to meet the existing exhaust holes.
Location
of Existing Exhaust Holes
For boats that currently DO HAVE thru-hull exhaust, the following measurements will determine if the exhaust holes are in the standard
location for
particular
motor or Exhaust
if a custom system
will be needed
to meet the existing exhaust holes.
Xyour
Location
of
Existing
Holes
(gimbal)
housing
to the
horizontal
center
For boats that currently
DO HAVE
thru-hull
exhaust,
theline
following measurements will determine if the exhaust holes are in the standard
Distance measured from the top of the drive
ofparticular
the exhaust
hole.
location for your
motor
or if a custom system will be needed to meet the existing exhaust holes.
X
X
Y
Distance measured
from the top of the drive
For boats that are equipped
with thru-hull
(gimbal) housing to the horizontal center line
exhaust, the following
measurements
will the top of the drive
Distance
measured
of the exhaust
hole.from
Distance
measured
from
the vertical
center
determine if the exhaust
holes
are to
in the
thehorizontal
(gimbal)
housing
center
line
line
of exhaust
the drivehole.
(gimbal) housing to the
of
the
standard location for
your
particular motor
vertical center line of the exhaust hole.
or if a custom system
will bemeasured
needed to
meet
Distance
from
the vertical center
the existing exhaust
holes.
line
of the drive
(gimbal) housing to the
Distance
measured
from
vertical
center
vertical center
line of
thethe
exhaust
hole.
Also applies toline
Twin
applications.
of Engine
the drive
(gimbal) housing to the
Distancevertical
measured
from
topexhaust
of the hole.
center
line the
of the
drive (gimbal) housing to the horizontal
Also applies to Twin Engine applications.
center line of the exhaust hole.
Also applies to Twin Engine applications.
Distance measured from the vertical center
line of the drive (gimbal) housing to the
/ GIL Marine - 140 Blaze Industrial Parkway - Berea, OH 44017 - 1-800-486-0999 - Fax 440-891-1868
verticalCORSA
center Performance
line of the exhaust
hole.
X
Y
Y
Y
www.corsaperformance.com - [email protected]
Also applies to Twin
Engine
applications.
CORSA
Performance
/ GIL Marine - 140 Blaze Industrial Parkway - Berea, OH 44017 - 1-800-486-0999 - Fax 440-891-1868
www.corsaperformance.com - [email protected]
CORSA Performance / GIL Marine - 140 Blaze Industrial Parkway - Berea, OH 44017 - 1-800-486-0999 - Fax 440-891-1868
www.corsaperformance.com - [email protected]
32
Customer Exhaust Measurement Sheet
Name:___________________________________________ Date:_ ______________________________________ Dealer Name:_ ____________________________________ Phone:______________________________________ Boat Manufacturer:_________________________________ Fax:_ _______________________________________ CORSA Customer Exhaust Measurement Sheet
Model:___________________________________________ Year:________________________________________ Name:
Sales Representative: _______________________________
Date:
Dealer
Phone:
Circle oneName:
of the following for each category below:
Boat
EngineManufacturer:
Make :
Mercury
Model:
Catalyst:
Yes
or
Engine Size: 4.3
Engine Make :
Volvo
OMC
Fax:
Other ____________
Yamaha
Year:
No
302
305
Circle one of the following for each category below
350
351
Mercury
6.2
454
Volvo
502
OMC
Engine
Size: 4.3
350 351 6.2
# of Engines:
Single 302
Twin 305
Triple
#EFI:
of Engines:
Yes
or
Single
No
Twin
496
500 EFI
525SC
Yamaha
454
502
575SC
Other ____________
496
500 EFI
525SC
.
575SC
Triple
EFI:
Yes______________________________________
or No
Drive Type:_
.
Drive
Type:Stock
____________________________.
Manifolds:
CMI
GIL
Other___________ Manifolds:
System Type : Stock
Through HullCMI
Splitter GIL
Diverterother________________
Q & Q II Q & Q +
Other.
System
Type :Through
Through
Hull
_ Transom Exit:
Transom
Splitter
Side
Exit
Diverter
Q &TipQ
90°
Tip
Angle
Transom
Exit:
Through Transom
Side Exit
_ X Dimension:
_ _____________________
II
90° Tip
_____________
Q & ___________
Q + Other _____________
Other
Angle Tip
Other ___________
XY Dimension:
__________________________
Dimension: _______________________
.
YA Dimension:
__________________________
Dimension: _______________________
.
AB Dimension:
Dimension:
__________________________
_______________________
BTransom
Dimension:
__________________________
Angle:______________________
(for CMI or Special Systems)
Transom Angle: _______________________
(for CMI or Special Systems)
Additional Comments
Additional Comments _________________________________________________________________________________________
_
__________________________________________________________________________________________________________
_
__________________________________________________________________________________________________________
_
__________________________________________________________________________________________________________
_
__________________________________________________________________________________________________________
_
Customer Signature
Date
__________________________________________________________________________________________________________
_ Sign and Fax or Mail to the Address Below
_Customer Signature_____________________________________________ Date________________________________________ _
Sign and Fax or mail to the address below.
CORSA Performance / GIL Marine - 140 Blaze Industrial Parkway - Berea, OH 44017 - 1-800-486-0999 - Fax 440-891-1868
33 - [email protected]
www.corsaperformance.com