HOW TO MATCH YOUR PLATE CARRIER Step-by-step process to ensure you get a “mission specific” kit STEP ONE: IDENTIFY YOUR ARMOR STANDARD CUT Shallow Taller SLOPE er HEIGHT Same SWIMMERS CUT Steep Shorter Same WIDTH Almost always stand alone Not usually stand alone (Soft armor backer required) STEP TWO: IDENTIFY YOUR MISSION • Modular “do everything” • Stripped-down, minimum attachments (back only) • Zero attachments, under/over garments Plate Size: A - Medium (M) = Level IV 6094 (Needed for CASS) = 6094 SLICK = 6094 Low-Vis B - Large (L) C - Extra Large (XL) Modular Level IV Plate Carrier LBT-6094-Level IV (A, B, C)* Slick Plate Carrier LBT-6094-SLICK (A, B, C)* • Modular web attachment points on entire carrier profile provides maximum versatility • Front, back, and side plate pockets • Quick release tabs on bottom for front and back plate adjustment/removal • Cummerbund for gear stowage and side body armor (6”x6” or 6”x8” hard plates and soft body armor – not included) with concealed rear bungee adjustment • Dual interior side radio pouches with retention. • Adjustable shoulder straps with removable wrap-around pads • Cable, antenna and hydration hose guides • Extra heavy duty reinforced drag handle • Centered front Kangaroo pocket provides quick access to maps, critical gear and mags (will accept LBT-2645A) • Interior loop attachment points for shoulder or collar soft armor • Separate sleeves for soft armor package, hard armor package and CASS • MIL-Spec stitching standards, Type E thread • Weight: 3.1 lbs. • Lightweight, stripped-down version of the LBT-6094A Plate Carrier with hook and loop closure • Slick plate carrier with dual elastic sides • Cordura® flap retention (500 Denier) • Quick access 6”x3” front admin pocket with sewn-in bungee retention & external loop for ID tags • Multipurpose sleeve for HALO board, chemlight, GPS or credentials • Minimum amount of modular webbing on back to mount mission-essential gear • Four routing points on front for PTTs, etc. • Side pocket plates sold separately • Weight: 1.5 lbs. * Available in Standard and Swimmers Cut Plates Side plate pockets available Please contact your LBT sales representative for information ** Armor plates not included** LBT-6094A - Fits small and medium plates LBT-6094B - Fits large plates LBT-6094C - Fits extra large plates * Available in Standard and Swimmers Cut Plates ** Level III-A FRAG soft armor packages available Please contact your LBT sales representative for information Hybrid Front Plate Vest Panel LBT-6094K (A, B, C) Low-Vis Plate Carrier KIT LBT-6094V (A, B, C) Super Lightweight version of the LBT-6094A Plate Carrier. Available in Standard & Swimmers Cut Plates. • Ultra slick plate carrier made of 500 Denier in Desert Sand • Removable double elastic cummerbund with hook and loop closure • Designed to be worn under clothes, but can also be worn over clothes • Comes with removable 6”x6” side plate pockets • Slick front has 4”x4” loop for identification tags • Two routing points on front for PTTs, etc. • Super-light, quick-dry mesh against body • Shoulder straps can be cut to fit • Radio pouch included • Weight: 12 ounces LONDON BRIDGE TRADING INC. 800-229-0207 www.londonbridgetrading.com Designed for use with our Modular Level IV Plate Carrier. Available in Standard & Swimmers Cut Plates. • Interchangeable front plate sleeve adapts to specific mission set • Three sewn-on M4 pouches with Cordura® flap and elastic retention, two magazines per pouch • Elastic pull tabs for quick magazine access • Quick access 6”x3” front admin pocket, with sewn-in bungee retention and external loop for ID tags • Multipurpose sleeve for HALO board, chemlight, GPS or credentials • Six routing points on front for PTTs, etc. • Weight: 1.2 lbs. ** Armor plates not included** LBT-6094K fits LBT-6094 Level IV (A, B, C) plate carriers. LBT-6094K-M (Medium), LBT-6094K-L (Large), LBT-6094K-XL (X-Large) 757-498-0207