PUSH LEVER SERIES DIMENSIONS PLJ

PUSH LEVER SERIES
DIMENSIONS
PLJ
CL
L
C
CL
PLJG-□H
L
C
CL
CL
HOW TO ORDER
ȚȖȔ ś!.!ś!ś!.!ś!!
Package Style:
□ = Tape & Reel
H = High Actuator
□ = Standard
Lever Stem Style
G = Gray
K = Black
□ = Without Ground Terminals
G = Ground Terminals
Termination Type:
J = J Type S.M.T
Push & Lever Switch
SPECIFICATION
MATERIALS
△MECHANICAL
Mechanical Life: 100,000 operation cycles
Operation Force: (A) Force on return actuator
(A) 40 ± 20gf.
(B) Force on center push direction
(B) 150 ± 50gf.
Operation Temp: -10℃ to +70℃
Storage Temperature: -25℃ to +80℃
△COVER: Stainless Steel
△BASE: UL94V-0 PPS Thermoplastic
Color: Brown
△STEM: UL94HB Nylon Thermoplastic
Color: Gray, Black
△CONTACT DISC: Phosphor bronze with silver cladding
at contact surface
△TERMINAL: Phosphor bronze with silver cladding at
contact surface
△SPRING: SWP or SUS
△ELECTRICAL
Electrical Life: 100,000 operation cycles
Non-switching Rating: 100mA, 50VDC
Switching Rating: 10mA, 5VDC
Contact resistance: (a) 100mΩ max. at initial
(b) 200mΩ max. after life test
Insulation Resistance: 100MΩ min. 100VDC
Dielectric Strength: 100VAC/ minute
Circuit: SPST
PLJ P.C.B LAYOUT
PLJG P.C.B LAYOUT
CIRCUIT DIAGRAM
SOLDERING AND CLEANING
PROCESSES
For best results, please follow these recommendations:
△HAND SOLDERING : Use a soldering iron of 30 watts,
controlled at 608℉(320℃) approximately 2 seconds.
△Reflow Temperature Profile:
△CLEANING PROCESS: Flux clean using force rinse,
high agitation or triple bath cleaning method. When
vapor methods are used, do not subject the switch to
solvents at temperature above 125℉(51℃).
△REFLOW SOLDERING: When applying reflow soldering
the peak temperature of the reflow oven should be set
at 240℃ max.
PACKING
QMK.śI!
Part Number
Number
Per Reel
PLJ
1000
(圓心)
A
B
B
A
A-A
SCALE: 1:1
B-B