R
EasyPRP KIT
2
1
10cc
1.5cc
0 cc
Easy PRP
3
2
1
easy prp
3
4
5
1- Easy PRP Extraction Syringe
2- RBC Collector
3- Scalp Vein Set(Butterfly Set)
4- 3 ml Syringe and Syringe coupler
5- White Cap
10cc
yP
RP
Anticoagulant
Eas
(ACD-A or Sodium Citrate)
10cc
1,5c
c
10cc
Eas
yP
RP
0 cc
10cc
0 cc
Easy PRP
Easy PRP
c
1,5cc
1,5cc
0 cc
0 cc
0 cc
1,5cc
Easy PRP
1,5cc
Easy PRP
1,5c
1- Take 1,5ml ACD-A or
Sodium Citrate anticoagulant
into the EasyPRP syringe.
0 cc
PRP
CENTRIFUGE
4- Invert the EasyPRP syringe
gently several times.
10cc
10cc
0cc
0cc
2-Take 8,5 ml blood from the patient by
using a scalp vein set (butterfly set).
(Draw the lower part of the piston to the
level of 10 ml).
5- Insert the Easy PRP syringe into the
centrifuge. Set up the program :
Speed:2400 RPM (RCF:1200 G)
Time: 5 Min.Start by pushing «START»
3- Attach the RBC (red blood cell) collector
firmly into the EasyPRP syringe.
Remove the plunger from the EasyPRP
syringe by turning it counterclockwise.
Insert the counterbalance into the
centrifuge ,always opposite from the
Easy PRP syringe.(If 1 or 3 Easy PRP
syringes are used.)
Easy PRP
Easy PRP
Easy PRP
10cc
10cc
10cc
Easy PRP
Easy PRP
Easy PRP
Easy PRP
1,5cc
10cc
0 cc
10cc
1,5cc
0 cc
0 cc
1,5cc
0 cc
1,5cc
1,5cc
0 cc
10cc
Easy PRP
10cc
Easy PRP
10cc
PLEASE NOTE:
RBC part pushed
down to 0 ml line=
with Buffy Coat
All RBC removed
(only clear serum)=
without Buffy Coat
(Take a firm hold of
the plunger and the
Easy PRP syringe and
press firmly but
carefully to prevent too
much of RBC to be
discharged.)
1,5cc
10cc
1,5cc
1,5cc
1,5cc
0 cc
0 cc
0 cc
0 cc
9- Remove the plunger and plug
7- Discharge the remaining RBC from the 8-Turn the Easy PRP syringe
6-Remove the syringe from the centrifuge
the white cap firmly on the tip
up-side
down
and
release
the
Easy
PRP
syringe
by
pushing
down
the
and connect the plunger back into the
remaining air from the EasyPRP of the Easy PRP syringe
plunger.
Easy PRP syringe by turning it clockwise.
syringe by pushing the content
Carefully separate the RBC collector from
up to the tip.
the Easy PRP syringe by turning it clockwise.
10c
10cc
PRP
Easy PRP
PPP
10cc
10cc
Easy PRP
1,5cc
10cc
Easy PRP
Easy PRP
cc
c
10cc
Easy PRP
1,5
0c
10cc
Easy PRP
Ea
sy
PR
P
c
1,5cc
1,5cc
1,5cc
0 cc
0 cc
0 cc
0 cc
Buffy Coat
1
0 cc
2
1,5cc
3
0 cc
1,5cc
PRP
CENTRIFUGE
14- PRP is ready to be used.
1
1
1
2
2
11- Remove the syringe from
centrifuge and connect the
plunger back into the EasyPRP
syringe.Carefully separate the
white cap from the EasyPRP
syringe.
12- Put the syringe coupler
into Easy PRP syringe.
Connect the 3 ml syringe.
1
2
3
3
3
ISO 10002:2004
Certification on
Service Quality Management
2
NOTE: Keep the EasyPRP extraction syringe upright during the process of preparing PRP
3
10- Insert the Easy PRP syringe and
counterbalance into the centrifuge.
Set up the program:
Speed:2400 RPM (RCF:1200 G)
Time: 10 Minutes
Start by pushing «START»
13-PRP can be transferred to the other syringe
by pushing the Easy PRP plunger down-wards.