why use hydraulic tools? key advantages PERFORMANCE INCREASED POWER: Compressed oil transfers more energy than compressed air, meaning more power in a smaller package COLD WEATHER OPERATION: Does not freeze up like pneumatic tools in sub-zero conditions WET OPERATION: Sealed hydraulic system allows for high performance in wet conditions versatility Portability: Power source can be carried in a truck bed or van Dual Operation: Run two tools at full capacity with HP28 power unit Selection: 60+ hydraulic tools that work off a single power source cost effective Fuel Savings: More efficient power source with smaller engine equals lower fuel costs Durability: Long tool life results in lower overall costs Low Operation Costs: Internal components are bathed in hydraulic oil, keeping them lubricated and reducing maintenance SAFETY No carbon monoxide or dust from tool exhaust as with gas or air tools Low Noise: Quieter operation than air tools, protects the operator Ergonomics: Due to greater energy efficiency, tools are lighter and can be carried and operated easily • • • • • 69242-1_Stanley Why Use Hydraulics Sell Sheet.indd 1 Images from top: Breaking concrete using a BR45 breaker HP28 twin power unit easily fits in a mid-sized truck bed Loosening seized hydrant with Hydrant Saver and IW24 Impact Wrench Simultaneous pipe cutting and pumping with the HP28 twin power unit Cutting ductile iron pipe with the DS12 Utility Chain Saw and clamp 9/6/13 4:45 PM hydraulic tools STANLEY PRODUCT SUPPORT SPECIALISTS FINDING YOU THE RIGHT EQUIPMENT • YOUR LOCAL PSS – On-Site Solutions Consutants Product Support Specialists (PSS) are Stanley representatives trained to serve you - the end user. Through product demonstrations, PSS provide infrastructure maintenance solutions and education on hydraulics. Each PSS is equipped with a demo van complete with hydraulic tools for cutting, breaking, pumping and fire hydrant maintenance. The ability to work with you directly provides the best opportunity to demonstrate the benefits of hydraulic tools on your job site. Think of a PSS as a solutions consultant, finding the right equipment to help you do the job better and safer! • The PSS Demo Van – Training and demos at your job site. With PSS on the road, setting up a demo is only a phone call away. A PSS will drive a fully-stocked vehicle to your location or even job site to conduct a demo and work along with you and your crew. Once on your location, a PSS will provide the knowledge and hands-on demonstrations to show you which hydraulic tools are the right solution for your business. Contact Stanley today to set up a demo! Tele: (503) 659-5660 Stanley Hydraulic Tools Division of Stanley Black & Decker 3810 S.E. Naef Road Milwaukie, OR 97267-5698 U.S.A. Tele: (503) 659-5660 | Fax: (503) 652-1780 | www.stanleyhydraulic.com September, 2013 69242-1_Stanley Why Use Hydraulics Sell Sheet.indd 2 9/6/13 4:45 PM