Elemental Scientific Enclosures for SC-DX Autosamplers Sample Cover and ULPA-Filtered Enclosures for SC-DX Autosamplers Introduction ICP and ICPMS sample integrity is maintained with the enclosures for the ESI SC-2 DX and SC-4 DX autosamplers. The enclosures can be configured either as a dust cover or ULPA-filtered minienvironment. Benefits • Protects samples from airborne contamination • Exhaust acid fumes to protect the laboratory environment • Clear acrylic construction for easy sample viewing • Covers only the sample area—the electronics are kept outside the enclosure • Large hinged door provides easy access to sample racks at any time SC-2 DX Autosampler with Enclosure • Exhaust port (50 mm, included) connects to laboratory ventilation system • The ULPA (Ultra-Low Particle Arrester) filter upgrade is 99.999%efficient down to 0.12 microns SC-2 DX and SC-4 DX with ULPA Filter SC-4 DX Autosampler with Enclosure ULPA Filter Specifications Air Vol. Noise Level Power 1 m /min 56 dBA 25 W 3 Enclosure with ULPA Filter Autosampler Model Enclosure Enclosure for SC-µ SC-8106 Enclosure for SC-2 DX SC-1207-DX SC-1207-DX-1200 Enclosure for SC-4 DX SC-1407-DX SC-1407-DX-1200 Enclosure for SC-8 DX SC-1807-DX SC-1807-DX-1000 Enclosure for SC-14 DX SC-1107-DX SC-1107-DX-1030 Elemental Scientific 1500 North 24th Street Omaha, NE 68110 USA Phone: 1.402.991.7800 Fax: 1.402.991.7799 SC-8 DX Autosampler with Enclosure Email: [email protected] Web: www.icpms.com