ISOLUTE® accessories and filtration products for sample preparation This product bulletin details ordering information for the full range of IST’s accessories and filtration products used in sample preparation applications, combinatorial chemistry and parallel synthesis. CONTENTS ISOLUTE SPE accessories Column adaptors 2 Column caps 2 PTFE stopcocks 12 Reservoirs 3 Frits 4-5 Frit insertors 5 ISOLUTE filtration products Single fritted columns 6-8 Double fritted columns 9 Phase separators 10 Wide mouth filtration reservoir 10 High throughput ISOLUTE 96-well filtration products Fixed well filtration plates 14 ® ISOLUTE Array filtration plates (flexible well) and accessories 14-15 Phase separator plates 15 ® Processing manifold, VacMaster -96 17-18 Processing stations for filtration, flash and SPE columns VacMaster-10 and -20 vacuum manifolds for SPE and filtration column processing 11-12 ® FlashVac -10 and -20 vacuum manifolds for processing larger flash and filtration columns 13 VacMaster-96 for high throughput 96-well plate processing 17-18 Gravity rack for gravity processing of phase separators and filtration columns 19 1 ISOLUTE column accessories Column adaptors 4 ISOLUTE column adaptors (PTFE or polyethylene (PE)) can be used to connect any Luer tipped reser3 voir for filtration column to any standard reservoir (A-J) 5 1 2 Ordering information for ISOLUTE column adaptors Part number Description 120-1100 120-1104 120-1101 120-1102 120-1103 120-1106 PTFE adaptors (A, B, C, G, H) PTFE adaptor - 6 ml glass column PE adaptors (A, B, C) PE adaptors (D, E) PE adaptor (F) PTFE adaptor (J) Units / pack 1 5 2 3 4 10 10 10 10 10 5 Column caps ISOLUTE column caps can be used to seal the top and bottom of all IST’s column configurations (A-J) Ordering information for column caps Part number Description 1201-0120 1201-0121-A 1201-0122-B 1201-0123-C 1201-0124-G 1201-0125-H 1201-0126-D 1201-0127-E 1201-0128-F 1201-0129-J Luer tip caps * 1 ml tube caps 3 ml tube caps 6 ml tube caps 10 ml tube caps 10 ml tube caps 15 ml tube caps 25 ml tube caps 70 ml tube caps 150 ml tube caps Units / pack 100 100 100 100 100 100 100 100 100 50 * fits all column sizes 2 Standard ISOLUTE column reservoirs Available in 11 columns sizes, including high throughput 96-well formats (see pages 14-15) ISOLUTE column reservoirs are standard grade (SG) and available empty or fritted in order analytical grade (AG). to meet the demands of many The SG formats are lower cost and filtration and combinatorial clean enough for most filtration chemistry applications. They can applications. AG reservoirs are be fitted to any industry standard cleaned specifically for high SPE columns by means of column sensitivity applications. It is adaptors. recommended that the SG They are available in two levels of reservoirs are evaluated first. cleanliness - Standard grade (SG) empty reservoirs Part number Description Units / pack 120-1101-A 120-1102-B 120-1103-C 120-1104-G 120-1105-H 120-1106-D 120-1107-E 120-1109-F 120-1110-J SG Empty reservoir 1 ml SG Empty reservoir 3 ml SG Empty reservoir 6 ml SG Empty reservoir 10 ml SG Empty reservoir 10 ml SG Empty reservoir 15 ml SG Empty reservoir 25 ml SG Empty reservoir 70 ml SG Empty reservoir 150 ml 100 100 100 50 50 100 100 50 25 Analytical grade (AG) empty reservoirs Part number Description 120-1001-A 120-1002-B 120-1003-C 120-1004-G 120-1005-H 120-1006-D 120-1007-E 120-1009-F AG Empty reservoir 1 ml AG Empty reservoir 3 ml AG Empty reservoir 6 ml AG Empty reservoir 10 ml AG Empty reservoir 10 ml AG Empty reservoir 15 ml AG Empty reservoir 25 ml AG Empty reservoir 70 ml Units / pack 100 100 100 50 50 100 100 50 3 Frit materials IST’s filtration products are based multidirectional channel system. a filter. The paths of the pores on fritted systems consisting of This enables the material to act as prevent particles from passing sintered particles (e.g. straight though the material (as polyethylene (PE) or PTFE), they do in a membrane). For this which are compressed to produce reason, a frit of nominal or mean a porous material. Pores run pore size, e.g. 20 µm, can retain a through the material in a high percentage of particles smaller than 20 µm in size. See pages 4-5 for PE, PTFE and stainless steel frit ordering information. Polyethylene frits are available in various pore sizes. The standard size Stainless steel frits for high is 20 µm, and is ideal for most sensitivity applications general filtration applications Frit material porosity Percentage retention of particles 1-3 µm 3 µm 5 µm 8 µm 15 µm 20 µm PE N/A 10% 70% 90% >99.9% 10 µm PE 99% 99% >99% >99% >99.9% 20 µm PTFE 99% >99% >99% >99% >99.9% 10 µm PTFE 99% >99% >99% >99% >99.9% 5 µm PTFE 99% >99% >99% >99% >99.9% Particle retention with various frit materials and porosities Polyethylene frits - 20 µm porosity Part number Description 120-1031-A 120-1033-B 120-1032-G 120-1034-H 120-1035-C 120-1036-D 120-1037-E 120-1038-F 120-1039-J 1 ml frit - 6 mm diameter, 20 µm PE 3 ml frit - 9 mm diameter, 20 µm PE 10 ml frit - 6 mm diameter, 20 µm PE 10 ml frit - 9 mm diameter, 20 µm PE 6 ml frit - 13 mm diameter, 20 µm PE 15 ml frit - 16 mm diameter, 20 µm PE 25 ml frit - 20 mm diameter, 20 µm PE 70 ml frit - 27 mm diameter, 20 µm PE 150 ml frit - 37 mm diameter, 20 µm PE Units / pack 100 100 100 100 100 100 100 100 50 Polyethylene frits - 10 µm porosity Part number Description Units / pack 120-1061-A 120-1062-B 120-1063-C 120-1064-G 120-1064-H 120-1065-D 120-1066-E 120-1067-F 120-1068-J 1 ml frit - 6 mm diameter, 10 µm PE 3 ml frit - 9 mm diameter, 10 µm PE 6 ml frit - 13 mm diameter, 10 µm PE 10 ml frit - 9 mm diameter, 10 µm PE 10 ml frit - 9 mm diameter, 10 µm PE 15 ml frit - 16 mm diameter, 10 µm PE 25 ml frit - 20 mm diameter, 10 µm PE 70 ml frit - 27 mm diameter, 10 µm PE 150 ml frit - 37 mm diameter, 10 µm PE 100 100 100 100 100 100 100 100 50 4 PTFE frits - 5 µm porosity Part number Description Units / pack 120-1091-A 120-1092-B 120-1093-C 120-1095-D 120-1096-E 120-1097-F 1 ml frit - 6 mm diameter, 5 µm PTFE 3 ml frit - 9 mm diameter, 5 µm PTFE 6 ml frit - 13 mm diameter, 5 µm PTFE 15 ml frit - 16 mm diameter, 5 µm PTFE 25 ml frit - 20 mm diameter, 5 µm PTFE 70 ml frit - 27 mm diameter, 5 µm PTFE 100 100 100 100 100 100 PTFE frits - 10 µm porosity Part number Description Units / pack 120-1081-A 120-1082-B 120-1083-C 120-1085-D 120-1086-E 120-1087-F 1 ml frit - 6 mm diameter, 10 µm PTFE 3 ml frit - 9 mm diameter, 10 µm PTFE 6 ml frit - 13 mm diameter, 10 µm PTFE 15 ml frit - 16 mm diameter, 10 µm PTFE 25 ml frit - 20 mm diameter, 10 µm PTFE 70 ml frit - 27 mm diameter, 10 µm PTFE 100 100 100 100 100 100 PTFE frits - 20 µm porosity Part number Description Units / pack 120-1071-A 120-1072-B 120-1073-C 120-1075-D 120-1076-E 120-1077-F 1 ml frit - 6 mm diameter, 20 µm PTFE 3 ml frit - 9 mm diameter, 20 µm PTFE 6 ml frit - 13 mm diameter, 20 µm PTFE 15 ml frit - 16 mm diameter, 20 µm PTFE 25 ml frit - 20 mm diameter, 20 µm PTFE 70 ml frit - 27 mm diameter, 20 µm PTFE 100 100 100 100 100 100 PTFE frits - 40 µm porosity - fit 6 ml glass column only Part number Description 120-1073-L 6 ml PTFE frit - 13 mm diameter Units / pack 60 Stainless steel frits - 10 µm porosity Part number Description Units / pack 120-1041-A 120-1042-B 120-1043-C 120-1044-G 120-1045-H 1 ml stainless steel frit - 6 mm diameter 3 ml stainless steel frit - 9 mm diameter 6 ml stainless steel frit - 13 mm diameter 10 ml stainless steel frit - 6 mm diameter 10 ml stainless steel frit - 13 mm diameter 100 100 100 100 100 Frit insertors These can be used to accurately place frits when self-packing columns. Available in all column sizes. Part number Description Units / pack 120-1151-L 120-1151-D 120-1151-E 120-1151-F 120-1151-J 6 ml glass column frit insertor* 15 ml frit insertor 25 ml frit insertor 70 ml frit insertor 150 ml frit insertor 5 5 1 1 1 * also fits 6 ml standard column 5 ISOLUTE filtration products Fritted ISOLUTE filtration columns ISOLUTE filtration columns are • Single column filtration using available fitted with a variety of a Luer tipped syringe barrel frit materials. Single or double • Multiple sample processing fritted formats, with either using VacMaster (page 11-12) standard grade (SG) or analytical or FlashVac (page 13), or grade (AG) cleanliness are commercially available available. automation equipment The filtration columns can be used • High throughput filtration - see pages 14-16 in the following ways: • Stand alone filter or stacked on top of an SPE column Single fritted columns Standard grade (SG) Single fritted reservoirs 20 µm PE Part number Description Units / pack 120-1111-A 120-1112-B 120-1113-C 120-1114-G 120-1114-H 120-1115-D 120-1116-E 120-1118-F 120-1119-J SG Single fritted reservoir 1 ml - 20 µm PE SG Single fritted reservoir 3 ml - 20 µm PE SG Single fritted reservoir 6 ml - 20 µm PE SG Single fritted reservoir 10 ml - 20 µm PE SG Single fritted reservoir 10 ml - 20 µm PE SG Single fritted reservoir 15 ml - 20 µm PE SG Single fritted reservoir 25 ml - 20 µm PE SG Single fritted reservoir 70 ml - 20 µm PE SG Single fritted reservoir 150 ml - 20 µm PE 100 100 100 50 50 100 100 50 25 Analytical grade (AG) single fritted reservoirs 20 µm PE Part number Description Units / pack 120-1121-A 120-1122-B 120-1123-C 120-1124-G 120-1124-H 120-1125-D 120-1126-E 120-1128-F AG Single fritted reservoir 1 ml - 20 µm PE AG Single fritted reservoir 3 ml - 20 µm PE AG Single fritted reservoir 6 ml - 20 µm PE AG Single fritted reservoir 10 ml - 20 µm PE AG Single fritted reservoir 10 ml - 20 µm PE AG Single fritted reservoir 15 ml - 20 µm PE AG Single fritted reservoir 25 ml - 20 µm PE AG Single fritted reservoir 70 ml - 20 µm PE 100 100 100 50 50 100 100 50 6 Standard grade (SG) single fritted reservoirs 10 µm PE Part number Description Units / pack 120-1361-A 120-1362-B 120-1363-C 120-1365-D 120-1366-E 120-1367-F 120-1369-J SG Single fritted reservoir 1 ml - 10 µm PE SG Single fritted reservoir 3 ml - 10 µm PE SG Single fritted reservoir 6 ml - 10 µm PE SG Single fritted reservoir 15 ml - 10 µm PE SG Single fritted reservoir 25 ml - 10 µm PE SG Single fritted reservoir 70 ml - 10 µm PE SG Single fritted reservoir 150 ml - 10 µm PE 100 100 100 100 100 50 25 Analytical grade (AG) single fritted reservoirs 10 µm PE Part number Description Units / pack 120-1161-A 120-1162-B 120-1163-C 120-1164-G 120-1164-H 120-1165-D 120-1166-E 120-1167-F AG Single fritted reservoir 1 ml - 10 µm PE AG Single fritted reservoir 3 ml - 10 µm PE AG Single fritted reservoir 6 ml - 10 µm PE AG Single fritted reservoir 10 ml - 10 µm PE AG Single fritted reservoir 10 ml - 10 µm PE AG Single fritted reservoir 15 ml - 10 µm PE AG Single fritted reservoir 25 ml - 10 µm PE AG Single fritted reservoir 70 ml - 10 µm PE 100 100 100 50 50 100 100 50 Standard grade (SG) single fritted reservoirs 5 µm PTFE Part number Description Units / pack 120-1391-A 120-1392-B 120-1393-C 120-1395-D 120-1396-E 120-1397-F SG Single fritted reservoir 1 ml - 5 µm PTFE SG Single fritted reservoir 3 ml - 5 µm PTFE SG Single fritted reservoir 6 ml - 5 µm PTFE SG Single fritted reservoir 15 ml - 5 µm PTFE SG Single fritted reservoir 25 ml - 5 µm PTFE SG Single fritted reservoir 70 ml - 5 µm PTFE 100 100 100 100 100 50 Analytical grade (AG) single fritted reservoirs 5 µm PTFE Part number Description Units / pack 120-1191-A 120-1192-B 120-1193-C 120-1195-D AG Single fritted reservoir 1 ml - 5 µm PTFE AG Single fritted reservoir 3 ml - 5 µm PTFE AG Single fritted reservoir 6 ml - 5 µm PTFE AG Single fritted reservoir 15 ml - 5 µm PTFE 100 100 100 100 120-1196-E 120-1197-F AG Single fritted reservoir 25 ml - 5 µm PTFE AG Single fritted reservoir 70 ml - 5 µm PTFE 100 50 Standard grade (SG) single fritted reservoirs 10 µm PTFE Part number Description Units / pack 120-1381-A 120-1382-B 120-1383-C 120-1385-D 120-1386-E 120-1387-F SG Single fritted reservoir 1 ml - 10 µm PTFE SG Single fritted reservoir 3 ml - 10 µm PTFE SG Single fritted reservoir 6 ml - 10 µm PTFE SG Single fritted reservoir 15 ml - 10 µm PTFE SG Single fritted reservoir 25 ml - 10 µm PTFE SG Single fritted reservoir 70 ml - 10 µm PTFE 100 100 100 100 100 50 7 Analytical grade (AG) single fritted reservoirs 10 µm PTFE Part number Description Units / pack 120-1181-A AG Single fritted reservoir 1 ml -10 µm PTFE 100 120-1182-B AG Single fritted reservoir 3 ml - 10 µm PTFE 100 120-1183-C AG Single fritted reservoir 6 ml - 10 µm PTFE 100 120-1185-D AG Single fritted reservoir 15 ml - 10 µm PTFE 100 120-1186-E AG Single fritted reservoir 25 ml - 10 µm PTFE 100 120-1187-F AG Single fritted reservoir 70 ml - 10 µm PTFE 50 Standard grade (SG) single fritted reservoirs 20 µm PTFE Part number Description Units / pack 120-1371-A SG Single fritted reservoir 1 ml - 20 µm PTFE 100 120-1372-B SG Single fritted reservoir 3 ml - 20 µm PTFE 100 120-1373-C SG Single fritted reservoir 6 ml - 20 µm PTFE 100 120-1375-D SG Single fritted reservoir 15 ml - 20 µm PTFE 100 120-1376-E SG Single fritted reservoir 25 ml - 20 µm PTFE 100 120-1377-F SG Single fritted reservoir 70 ml - 20 µm PTFE 50 Analytical grade (AG) single fritted reservoirs 20 µm PTFE Part number Description Units / pack 120-1171-A AG Single fritted reservoir 1 ml - 20 µm PTFE 100 120-1172-B AG Single fritted reservoir 3 ml - 20 µm PTFE 100 120-1173-C AG Single fritted reservoir 6 ml - 20 µm PTFE 100 120-1175-D AG Single fritted reservoir 15 ml - 20 µm PTFE 100 120-1176-E AG Single fritted reservoir 25 ml - 20 µm PTFE 100 120-1177-F AG Single fritted reservoir 70 ml - 20 µm PTFE 50 Glass reservoirs and columns Glass reservoirs Part number Description 120-1011-L 120-1030-L Empty 6 ml glass reservoir 6 ml glass reservoir fitted with single 20 µm PTFE frit Units / pack 30 30 8 Double fritted columns Standard grade (SG) double fritted reservoirs 20 µm PE Part number Description Units / pack 120-1211-A 120-1212-B 120-1213-C 120-1214-G 120-1214-H 120-1215-D 120-1216-E 120-1217-F 120-1218-J SG Double fritted reservoir 1 ml - 20 µm PE SG Double fritted reservoir 3 ml - 20 µm PE SG Double fritted reservoir 6 ml - 20 µm PE SG Double fritted reservoir 10 ml - 20 µm PE SG Double fritted reservoir 10 ml - 20 µm PE SG Double fritted reservoir 15 ml - 20 µm PE SG Double fritted reservoir 25 ml - 20 µm PE SG Double fritted reservoir 70 ml - 20 µm PE SG Double fritted reservoir 150 ml - 20 µm PE 100 100 100 50 50 100 100 50 25 Analytical grade (AG) double fritted reservoirs 20 µm PE Part number Description Units / pack 120-1021-A 120-1022-B 120-1023-C 120-1024-G 120-1024-H 120-1025-D 120-1026-E 120-1028-F AG Double fritted reservoir 1 ml - 20 µm PE AG Double fritted reservoir 3 ml - 20 µm PE AG Double fritted reservoir 6 ml - 20 µm PE AG Double fritted reservoir 10 ml - 20 µm PE AG Double fritted reservoir 10 ml - 20 µm PE AG Double fritted reservoir 15 ml - 20 µm PE AG Double fritted reservoir 25 ml - 20 µm PE AG Double fritted reservoir 70 ml - 20 µm PE 100 100 100 50 50 100 100 50 9 Speciality filtration products Phase separators for aqueous work-up purification Phase separators are ISOLUTE following organic synthesis. columns and plates fitted with an Ideal for processing on the IST optimised frit material that easily Gravity Rack (page 19). Can also separates aqueous phases from be processed on the VacMaster chlorinated solvents under gravity. and FlashVac processing This range is particularly suitable manifolds (pages 11-13). Phase separator columns Part number Description Units / pack 120-1901-A 120-1903-B 120-1905-C 120-1906-D 120-1907-E 120-1908-F 120-1909-J Phase separator 1 ml (A) Phase separator 3 ml (B) Phase separator 6 ml (C) Phase separator 15 ml (D) Phase separator 25 ml (E) Phase separator 70 ml (F) Phase separator 150 ml (J) 100 100 100 100 100 50 25 Wide mouth filtration cleavage. Available fitted with reservoir (50 ml) polyethylene frits as standard. Can Designed for use in applications be processed on the VacMaster where recovery of solid material is and FlashVac processing required, such as removal of solid manifolds (pages 11-12 and 13 phase synthesis resins, and respectively) isolation of resins prior to 50 ml filtration reservoir Part number Description Units / pack 120-1120-K 50 ml filtration reservoir, 20 µm 25 ∗ Phase separator plates and wells ∗ High throughput filtration plates and wells See high throughput section , pages 14-15, for details of these products. 10 Processing stations for standard columns VacMaster-10 and -20 processing stations VacMaster vacuum manifolds are designed to give optimal flexibility, high purity and safety in sample processing for all types of SPE, filtration and combinatorial chemistry applications. For a full description of the VacMaster manifolds and the range of accessories, see pages 76-82 of the current IST VacMaster-10 and -20 shown fitted with standard stainless steel needles (left) and optional PTFE stopcock / needle system (right) catalogue. VacMaster-10 - for processing up to 10 samples simultaneously Part number Description Units / pack 121-1010 121-1012 121-1016 121-1027 Complete with 10 mm diameter collection tube rack Complete with 12 mm diameter collection tube rack Complete with 16 mm diameter collection tube rack Complete with 27 mm diameter collection tube rack 1 1 1 1 VacMaster-20 - for processing up to 20 samples simultaneously Part number Description Units / pack 121-2010 Complete with 10 mm diameter collection tube rack 1 121-2012 Complete with 12 mm diameter collection tube rack 1 121-2016 Complete with 16 mm diameter collection tube rack 1 VacMaster accessories and replacement parts: needles and stopcocks for VacMaster-10 and -20 Part number Description Units / pack 121-0001 121-0002 121-0003 121-0004 121-0005 121-0009 121-0009-S 121-0030 121-0031 PTFE stopcock needle PTFE needle unit Stainless steel needles Stainless steel needle retainer Port sealing plugs Universal PTFE stopcock PTFE stopcock - positive pressure* Extended PTFE stopcock Extended PTFE stopcock needle 10 10 10 10 30 10 10 10 10 * Option for combinatorial chemistry applications requiring positive pressures ≤ 15 psi Components for VacMaster-10 and -20 Part number Description Units / pack 121-0040 121-0041 121-0042 121-0045 VacMaster rack dome nut VacMaster rack nut washer VacMaster rack foot VacMaster rack leg 5 5 2 2 11 Components for VacMaster-10 Part number Description Units / pack 121-0043 121-1132 121-1133 121-1134 121-1135 121-1136 121-1137 121-1138 121-1143 121-1030 VacMaster-10 rack strap VacMaster-10 rack 10 mm tubes VacMaster-10 rack 12 mm tubes VacMaster-10 rack 16 mm tubes VacMaster-10 top/mid plate 10 mm VacMaster-10 top/mid plate 12 mm VacMaster-10 top/mid plate 16 mm VacMaster-10 top/mid plate 27 mm VacMaster-10 lower plate VacMaster-10 silicone lid gasket 1 1 1 1 1 1 1 1 1 1 Components for VacMaster-20 Part number Description Units / pack 121-0044 121-2161 VacMaster-20 rack strap VacMaster-20 rack 10 mm tubes 1 1 121-2162 121-2163 121-2164 121-2165 VacMaster-20 rack 12 mm tubes VacMaster-20 rack 16 mm tubes VacMaster-20 top/mid plate 10 mm VacMaster-20 top/mid plate 12 mm 1 1 1 1 121-2166 121-2173 121-2059 VacMaster-20 top/mid plate 16 mm VacMaster-20 lower plate VacMaster-20 silicone lid gasket 1 1 1 Vacuum pump and supplies Part number Description Units / pack 121-9115 121-9240 121-0010 121-2095 121-2096 121-2097 121-2098 121-2099 Vacuum pump - 115 / 60 Hz Vacuum pump - 240 / 50 Hz PTFE T - valve VacMaster trap kit 1L flask with 1 side arm Flask stopper with 1 tubing connector 1.5m of vacuum tubing Replacement gasket 1 1 1 1 1 1 1 1 Universal stopcocks withstand up to 15 psi positive IST’s universal PTFE stopcocks pressure is available for are designed for easy flow control combinatorial chemistry for any vacuum manifold compati- applications. VacMaster ble with Luer tipped reservoirs and compatible combined stopcock / columns. needles are also available. See A universal stopcock that can page 11. Ordering information universal stopcock Part number Description Units / pack 121-0009 121-0009-S Universal PTFE stopcock Universal PTFE stopcock - positive pressure* 10 10 * Option for combinatorial chemistry applications requiring positive pressures ≤ 15 psi 12 Processing stations for larger columns FlashVac®-10 and -20 manual processing stations FlashVac sample processing For further information, see pages stations have been specifically 85- 86 of the current IST designed to meet the needs of catalogue. scientists who process larger flash, SPE and filtration columns. The manifold has been designed to hold larger volume collection vessels that cannot be accommodated in manifolds designed for use with standard SPE columns. 50 g / 150 ml ISOLUTE Flash Silica on a FlashVac-10 FlashVac-10 for processing up to ten 150 ml columns simultaneously Part number Description 122-1019 FlashVac-10 complete with 19 mm, 10 position rack 122-1025 FlashVac-10 complete with 25 mm, 10 position rack FlashVac-10 for processing up to twenty 25 ml columns or ten 150 ml columns simultaneously Part number Description 122-2019 122-2025 FlashVac-10 complete with 19 mm, 20 position rack FlashVac-10 complete with 25 mm, 10 position rack* * The 25 mm positions in the FlashVac-20 are staggered in order to accommodate ten 150 ml columns See page 86 of the current IST catalogue for accessories and spare parts ordering information 13 High throughput 96-well plate format 96-well SPE plates and filtration products (see pages 14-15 and the IST catalogue for further details) Fixed well filtration plates Filtration plate—fixed well Part number Description 120-1021-P01 120-1021-P05 120-1022-P01 120-1022-P05 120-1081-P 96-well filtration plate (single 10 µm PE* frit) 96-well filtration plate (single 10 µm PE frit) 96-well filtration plate (single 20 µm PE frit) 96-well filtration plate (single 20 µm PE) x 5 20 µm polyethylene frits, 7 mm / 96 well plate Units / pack 1 5 1 5 100 * PE is polyethylene Flexible well filtration Filtration plate—removable wells Plates Part number Description Units / pack 120-1000-P01 ISOLUTE Array base plate pk 1 1 120-1000-P05 ISOLUTE Array base plate pk 5 5 120-1001-RP Empty ISOLUTE Array plate 1 ml 1 120-1001-TP Empty ISOLUTE Array plate 2 ml 1 120-1010-RP Single fritted ISOLUTE Array plate 1 ml, 20 µm PE 1 120-1010-TP Single fritted ISOLUTE Array plate 2 ml, 20 µm PE 1 120-1040-RP Single fritted ISOLUTE Array plate 1 ml, 10 µm PE 1 120-1040-TP Single fritted ISOLUTE Array plate 2 ml, 10 µm PE 1 120-1030-RP Single fritted ISOLUTE Array plate 1 ml, 5 µm PTFE 1 120-1030-TP 120-1020-RP 120-1020-TP 120-1025-RP 120-1025-TP Single fritted ISOLUTE Array plate 2 ml, 5 µm PTFE Single fritted ISOLUTE Array plate 1 ml, 10 µm PTFE Single fritted ISOLUTE Array plate 2 ml, 10 µm PTFE Single fritted ISOLUTE Array plate 1 ml, 20 µm PTFE Single fritted ISOLUTE Array plate 2 ml, 20 µm PTFE 1 1 1 1 1 14 Wells Part number Description Units / pack 120-1001-R Empty ISOLUTE Array wells 1 ml 100 120-1001-T Empty ISOLUTE Array wells 2 ml 100 120-1010-R 120-1010-T 120-1040-R 120-1040-T 120-1030-T 120-1020-R 120-1020-T 120-1025-R 120-1025-T Single fritted ISOLUTE Array wells 1 ml, 20 µm PE Single fritted ISOLUTE Array wells 2 ml, 20 µm PE Single fritted ISOLUTE Array wells 1 ml, 10 µm PE Single fritted ISOLUTE Array wells 2 ml, 10 µm PE Single fritted ISOLUTE Array wells 2 ml, 5 µm PTFE Single fritted ISOLUTE Array wells 1 ml, 10 µm PTFE Single fritted ISOLUTE Array wells 2 ml, 10 µm PTFE Single fritted ISOLUTE Array wells 1 ml, 20 µm PTFE Single fritted ISOLUTE Array wells 2 ml, 20 µm PTFE 100 100 100 100 100 100 100 100 100 ISOLUTE Array Frits Part number Description Units / pack 120-1015-R 120-1060-R 120-1090-R 120-1080-R 120-1070-R Frits, Array, circular, 20 µm PE Frits, Array, circular, 10 µm PE Frits, Array, circular, 5 µm PTFE Frits, Array, circular, 10 µm PTFE Frits, Array, circular, 20 µm PTFE 100 100 100 100 100 ISOLUTE Array Accessories Part number Description 120-1000-P01 ISOLUTE Array base plate Units / pack 1 120-1000-P05 ISOLUTE Array base plate 5 120-1200 Strip of 8 base plate plugs 50 120-1201 Luer adaptors 25 120-1202 Well removing tool 1 High throughout ISOLUTE on the VacMaster-96. See page 10 phase separators and the IST catalogue for full The frit material use in these product description. products is optimised for the For a ‘How to use guide’, request separation of aqueous phases from Technical Note TN122. chlorinated solvents under gravity. For ordering information see The high throughput 96-well phase overleaf. separator plates can be processed 15 Part number Description Units / pack ISOLUTE fixed 96-well phase separator plates 120-1910-P01 Fixed 96-well phase separator plate, 2 ml 1 120-1910-P05 Fixed 96-well phase separator plate, 2 ml 5 ISOLUTE Array 96-well phase separator plates 120-1920-RP Array 96-well phase separator plate, 1 ml 1 120-1920-TP Array 96-well phase separator plate, 2 ml 1 ISOLUTE Array phase separator columns* 120-1920-R Array phase separator columns, 1 ml 100 120-1920-T Array phase separator columns, 2 ml 100 * To partially populate a plate, a base plate and base plate sealing plugs are required, See page 15 for ordering information Other 96-well products High capacity Array plates organic synthesis in combinatorial ISOLUTE HM-N Array and wells for high chemistry lead generation). products for supported throughput purification Available packed with 400 mg liquid-liquid extractions and Large bed mass ISOLUTE Array silica based sorbents, or 200 mg of water removal wells and plates are available for resin based sorbent. For full details, see the IST applications requiring a higher See PB0307 for further details. catalogue or contact your IST sorbent capacity for purification distributor. (e.g. purification following 16 Processing station for 96-well plates VacMaster-96® The VacMaster-96 vacuum VacMaster trap kit manifold is compatible with both ISOLUTE-96 and ISOLUTE Array plate formats. The 96-well plate lightweight, solvent resistant construction makes it ideal for many high throughput sample preparation procedures, including protein precipitation sample clean up following organic synthesis, VCU-2 VacMaster-96 and phase separation applications in combinatorial chemistry. A solvent trap kit is available to VacMaster-96 a fully integrated remove and isolate hazardous system for high throughput sample The VacMaster-96 has a range of waste solvents during sample processing. accessories specifically designed processing. to complete the range of 96-well products. These include deep well Vacuum control units are also For more detailed information collection plates and spacers for available either with (see about each of these products, see compatibility with other photograph above) or without the current IST catalogue or commercially available collection integral vacuum generator. contact your IST distributor. plate designs. These features make the VacMaster-96 for processing up to 96 samples simultaneously Part number Description VacMaster-96 manifold options 121-9600 VacMaster-96 (no vacuum controller included) 121-9603 VacMaster-96 with VCU-1 (121-9601) 121-9604 VacMaster-96 with VCU-2 (121-9602) Vacuum control unit options 121-9601 VacMaster-96 vacuum control unit (VCU-1) 121-9602 VacMaster-96 Vacuum Control Unit with integral vacuum generator (VCU-2) Units / pack 1 1 1 1 1 This option is supplied for use with automated liquid handling systems with an in-built computer controlled vacuum source This option is for use in a laboratory with a vacuum source This option is available for use in a laboratory with a compressed air source 17 VacMaster-96 accessories and replacement parts Part number Description Units / pack 121-9610 121-9611 121-9612 121-9613 121-9614 121-9615 121-9616 ISOLUTE Array insert (6 mm) for VacMaster-96 (Acetal) VacMaster-96 insert (12 mm) for 3M/Ansys plates (Acetal) Replacement Gasket Replacement 'o' ring Collection plate spacer (2 mm) (for deep well format) Collection plate spacer (shallow) (microtitre plate format) ISOLUTE Array insert (6 mm) for VacMaster-96 (PVDF) 1 1 1 1 1 1 1 Supplied as standard with all VacMaster-96 units For use in combinatorial chemistry applications using aggressive solvents 96-well collection plates - deep well Part number Description Units / pack 121-5201 Polypropylene, Square well - 350 µl / well 50 121-5202 Polypropylene, Square well - 1 ml / well 50 121-5203 Polypropylene, Square well - 2 ml / well 50 121-5204 Piercable Sealing Cap 50 121-5205 Drain Cap 25 VacMaster trap kit—can also be used with the VacMaster-10 and -20 processing stations Part number Description 121-2095 VacMaster trap kit Replacement parts 121-2096 Flask with side arm 121-2097 Flask stopper with tubing connector 121-2098 Vacuum tubing 121-2099 Replacement sealing gasket 18 IST Gravity Rack for processing columns under gravity Gravity processing The system can be used for This free standing system has been processing IST’s phase separator specifically designed for gravity columns. processing. All of the rack Technical Note TN122 details the components are made from use of IST’s Phase separators. solvent resistant polyethylene materials. The 20-port rack can It is also suitable for SPE process up to twenty 25 ml (E) applications where vacuum is not columns simultaneously. required. Gravity Rack ordering information Part number Description 123-2010 123-2012 123-2016 123-2019 Complete with 10 mm diameter collection tube rack Complete with 12 mm diameter collection tube rack Complete with 16 mm diameter collection tube rack Complete with 19 mm diameter collection tube rack Components for Gravity Rack collection tube size conversion Part number Description Units / pack 123-2110 123-2112 123-2116 123-2119 123-2100 Top / mid plates for 10 mm diam. tubes Top / mid plates for 12 mm diam. tubes Top / mid plates for 16 mm diam. tubes Top / mid plates for 19 mm diam. tubes Blank top / mid plates for customized racks 2 2 2 2 2 Gravity Rack needle options Part number Description Units / pack 121-0001 121-0002 121-0003 121-0004 PTFE stopcock / needle unit PTFE needle unit Stainless steel needle Stainless steel needle retainer 10 10 20 10 19 © 2001 International Sorbent Technology Ltd. Distributed by: International Sorbent Technology Ltd, Dyffryn Business Park Hengoed, Mid Glamorgan, UK, CF82 7RJ Tel: +44 (0) 1443 816656 Fax: +44 (0) 1443 816657 E-mail: [email protected] PB0305 www.ist-spe.com ISOLUTE, ISOLUTE Array, IST, VacMaster and FlashVac are registered trademarks of International Sorbent Technology Limited. 20
© Copyright 2024