Document 269811
Sample Mounting Options CRYOSTATION Sample mounting is a very important part of successful use of any cryogenic platform. We offer several options to fit different applications. Fixed Sample Mounts • Thermal transfer • Vibration Application Notes APP -215 The key issues to consider with your sample are: • Bonding of the sample to the mount • Emissivity • Window proximity The standard Cryostation uses an easily configurable sample mount which is mounted to the cooled platform. This mount and platform are easily accessed once the lid, window assembly, and radiation shields are removed. The sample mount includes a post that can be mounted vertically or horizontally to position the sample near any of the windows. The figure below shows Sample mount orientations • Focusing • Moving the sample several configurations of the internal sample mount for various applications. The sample mount base may be positioned at 45 degree steps with respect to the windows. The post in the sample mount has a flat end plate with four holes which can be used to attach the sample; as shown below. The small hole on the side of the endplate is to attach the sample thermometer. Sample mount post Cutaway view of standard sample chamber Cold Science Made Simple 1 Montana Instruments Corporation www.montanainstruments.com Electrical Sample Mounts Two types of special sample mounts are available which provide electrical and thermal connections to the sample. Both have a sample bonded in the center, with electrical connections made to pins which can mate to connectors. The CB12 version has a central plate where the sample is mounted and wire-bond connected to the pin set. The LCC28 version uses an LCC socket into which a “chip” with sample is inserted. This table provides a comparison of the two styles. Application Notes APP -215 TDESM – LCC28 TDESM – CB12 TDESM – CB12 Electrical contacts 12 wires TDESM – LCC28 28 wires Sample bonding Sample bonded to cap plate and wired to board. User replaces plate and board on sample post to change samples. Sample is bonded to leadless chip carrier (LCC) which is inserted into socket for electrical and thermal connection to sample post. Change-out time Changing sample involves disconnecting cables to side pins and unscrewing cap plate from post. Changing sample involves simply removing LCC “chip” and inserting new one. Summary Better thermal connection to the sample. More wires and quicker sample change-out. Piezo Based Mounting Montana Instruments supports piezo based translation of the sample. This may be done from the platform level in the standard system if the series of stages is not too tall. We also offer a “piezo” version with a recessed sample platform to mount a stack of piezo stages in a “pocket”, shown in the image below. This was designed for the Attocube family of stages. These stages are available in X, Y, and Z motion, and also rotation and tilt options. These may generally combined in any order. If you purchase the piezo version, you may also choose to use the standard sample mount without the pocket. For users that want to use the standard sample mount, a raised platform and standard mount are provided. This view shows the location of the standard sample mount in that setup. Piezo Recessed Cryostation with Recessed and Standard Sample Mount Configurations Cold Science Made Simple 2 Montana Instruments Corporation www.montanainstruments.com Montana Instruments can provide custom sample mounts for your experiments. Here are some exam Simple sample mounts: 4100-SM39 4100-330/331 Montana Instruments can provide custom sample mounts for your experiments. Here are some examples: Here are some Montana Instruments can provide customsample sample mounts for your examples: Montana Instruments can provide custom mounts forexperiments. your experiments. Here are Simple sample mounts: Simple sample mounts: some examples: Montana Instruments can provide custom sample mounts for your experiments. Here are some examples: 4200-337B Simple sample mounts: 4200-337A 4100-SM39 4100-330/331 Montana Instruments can provide custom sample mounts for your experiments. Here are some examples: Simple sample mounts Overhead view configurations Overhead view configurations: 4100-371 Montana Instruments can provide custom sample mounts for your experiments. Here are some examples: Simple sample mounts: Simple sample mounts: 4100-SM39 4100-SM39 4100-330/331 4100-330/331 4100-SM39 4100-330/331 4100-SM39 4100-SM39 4100-330/331 4200-337B 4200-337A 4200-337A 4100-331 4100-331 4100-331 4100 2317 Birdie Drive,4100-SM26 Bozeman, MT 59715 / USA TOLL FREE: 877-333-0959 / TEL: 406-551-2796 / info@mon (DIP) 4100-SM32 APP-215 Sample Mounting Options Adjustable mounts: Adjustable mounts 4100-SM32 4100-SM32 4100-SM32 Adjustable mounts: Adjustable mounts: 4100-SM32 4100-SM26 (DIP) 4100-SM26 (DIP) 4100-SM26 (DIP) Adjustable mounts: Piezo stack configurations: 4100-SM32 Piezo stack configurations: Adjustable mounts: Piezo stack configurations 4100-SM26 (DIP) Adjustable mounts: APP -215 4100-SM26 (DIP) Piezo stack configurations: 4100-1162 (dual position) 4200-337A Overhead view configurations: Application Notes 4100-SM32 4100-331 Overhead configurations: Overhead view view configurations: 4200-337B 4100-331 Adjustable mounts: 4100-331 4200-337A 4200-337B Overhead view configurations: 4200-337A Overhead view configurations: 4100-371 4200-337A Overhead view configurations: 4200-337B 4200-337B 4100-371 4100-371 4100-330/331 4200-337B 4100-371 4100-371 Piezo stack configurations: 4100-SM57 4100-1162 (dual position) 4100-1131 (rotary) 2317 Birdie Drive, Bozeman, MT 59715 / USA TOLL FREE: 877-333-0959 / TEL: 406-551-2796 / [email protected] www.montanainstr Castle sample mounts: APP-215 Sample Mounting Options 4100-SM26 (DIP) 4100-1162 (dual (dual position) 4100-1162 position) 4100-1131 4100-1131 (rotary) (rotary) 2317 Birdie Drive, Bozeman, MT 59715 / USA TOLL FREE: 877-333-0959 / TEL: 406-551-2796 / [email protected] www.montanainstruments.com 2317 Birdie Drive, Bozeman, MT 59715 / USA TOLL FREE: 877-333-0959 / TEL: 406-551-2796 / [email protected] www.montanainstruments.com 4100-1162 (dual position) 4100-1162 (dual Sample position) APP-215 Mounting Options 4100-1131 (rotary) Page 4 of 6 4100-1131 (rotary) APP-215 Sample Mounting Options 4100-SM57 Page 4 of 6 Birdie Drive, MT877-333-0959 59715 / USA TOLL 877-333-0959 / TEL: 406-551-2796 / [email protected] www.montanainstruments.com 2317 Birdie Drive, Bozeman,2317 MT 59715 / USABozeman, TOLL FREE: / TEL:FREE: 406-551-2796 / [email protected] www.montanainstruments.com APP-215 Options Sample Mounting Options APP-215 Sample Mounting 4100-1162 (dual position) Castle sample mounts: Page 4 of 6 Page 4 of 6 4100-1131 (rotary) 4100-SM57 2317 Birdie Drive, Bozeman, MT 59715 / USA TOLL FREE: 877-333-0959 / TEL: 406-551-2796 / [email protected] www.montanainstruments.com Other Castle sample mounts 4100-SM57 APP-215 Sample Mounting Options Castle sample mounts: Castle sample mounts: Page 4 of 6 4100-329/330/331 4100-517/518 4100-514/ 4100-329/330/331 4100-517/518 4100-514 Other: Other: 4100-329/330/331 4100-329/330/331 4100-517/518 4100-517/518 Other: Other: 4100-514/515 4100-514/515 4100-SM13 4100-SM13 4200-436 (transmission) 2317 Birdie Drive, Bozeman, MT 59715 / USA TOLL FREE: 877-333-0959 / TEL: 406-551-2796 / inf APP-215 Sample Mounting Options Cold Science Made Simple 4200-436 (transmission) 3 4200-436 (transmission) 4200-436 (transmission) 2317 Birdie Drive, Bozeman, MT 59715 / USA TOLL FREE: 877-333-0959 / TEL: 406-551-2796 / i Montana Instruments Corporation www.montanainstruments.com APP-215 Sample Mounting Options The 4100-1162 is an adjustable height sample mount. The overall height is adjustable from 30.7mm to 43.2mm. The post is 11.1mm square in cross section, and has our standard sample mount bolt pattern on top and mounts to an attocube 101 stack on the bottom. The top piece can be switched to a horizontal position to mount the sample off to the side and allow horizontal adjustment. The position of the upper section is held in place by a screw. The holes in the side of the top piece are for mounting a thermometer. 4100-1162 Application Notes APP -215 Cold Science Made Simple 4 Montana Instruments Corporation www.montanainstruments.com
© Copyright 2024