1. home and garden
2. home improvement and repair
3. power tools

7. TECHNICAL SPECIFICATIONS QUANTITIES AND SAMPLE FORM
PRICE SHEDULE
SUMMARY
I.
GENERALITIES OF TECHNICAL SPECIFICATIONS .............................................. 3
1.
BACKGROUND ...................................................................................................................... 3
1.1. The Faculty of Rehabilitation Science of the University of Jordan................................ 3
1.2. “Support to the Faculty of Rehabilitation Science of the University of Jordan” ........... 3
2. DESCRIPTION OF COMPONENTS AND LEVEL OF DETAILS OF TECHNICAL SPECIFICATIONS ....... 3
3. SUBDIVISION INTO GROUPS................................................................................................... 3
4. ALTERNATIVE OFFERS.......................................................................................................... 4
5. WORKS AND GOODS INCLUDED IN THE CONTRACT ................................................................ 4
6. WORKS AND GOODS NOT INCLUDED IN THE CONTRACT ........................................................ 4
7. UNITS OF MEASUREMENT ..................................................................................................... 5
8. STANDARDS ......................................................................................................................... 6
9. SPARE PARTS, CONSUMABLES AND SPECIAL TOOLS .............................................................. 6
10.
INSPECTION AND TESTS .................................................................................................... 6
11.
INCIDENTAL SERVICES ...................................................................................................... 7
11.1. Assembling, Installation and Training.......................................................................... 7
11.2. On-Site Commissioning................................................................................................ 7
11.3. Manuals ....................................................................................................................... 7
12.
TENTATIVE EXECUTION SCHEDULE DIAGRAM ................................................................... 8
II.
13.
14.
15.
TECHNICAL REQUIREMENTS .................................................................................... 9
GENERAL REQUIREMENTS ................................................................................................ 9
ITEM LIST GROUP I – TOOLS & EQUIPMENTS FOR ORTHOTICS & PROSTHETICS WORKSHOP .. 9
ITEM LIST GROUP II – EQUIPMENT FOR DEPARTMENT OF PHYSICAL THERAPY .................. 31
2
I. Generalities of Technical Specifications
1. Background
1.1. The Faculty of Rehabilitation Science of the University of Jordan
The faculty of rehabilitation Sciences is one of the most recent faculties at the University of Jordan,
Amman, Jordan, which was established in 1999. Initially, the faculty started with three departments;
Physiotherapy, Occupational Therapy, and Orthotic and Prosthetic. In 2003, the Hearing and
Speech Sciences Department was launched. Through these departments, the faculty offers Bachelor
degrees and a Master degree in speech and language pathologies. Moreover, the faculty provides
medical rehabilitation services for patients and community members in psychological and physical
aspects.
1.2.
“Support to the Faculty of Rehabilitation Science of the University of Jordan”
Fourteen years after its foundation, the Medicine Faculties is undergoing a modernisation
programme, whose strategy involves the present Jordan-Italian Cooperation Programme named
“Support the activities of the Faculty of Rehabilitation Sciences of Jordan University ”
This Programme contains two different components:
(a) Technical assistance, trough the Executing Agency of the University of Rome “Tor
Vergata” and other partner institutions are Consortium for the Development of Tropical
Medicine –CMT and UNIMED), financed through Italian Grant for a total Euro
1,715,940.80. The specific objectives are: training in Jordan of about 160 therapist within
the sectors of Physiotherapy and of techniques of Orthotics and Prosthetics and requalifying and updating the professional skills in Italy for 9 Jordan experts of the sector;
(b) Procurement of goods, services and works, indicated in Section 7 – Technical
requirements and Bill of quantities, financed through Italian Soft Loan for a total amount
of the Euro 1,841,222.00
These Bidding Documents refer only to the second component (b).
2. Description of Components and Level of Details of Technical Specifications
In order to facilitate Bidders comprehension of these Technical Specifications, 2 (two) drawings
have been prepared in Section 9. Drawings.
3. Subdivision into Groups
Notwithstanding that the supply of all items will be executed under one single Contract, the various
items have been grouped together into 2 (two) different components as follows:
Group 11
Group
Group 2
Tools & Equipment for Orthotics & prosthetics workshop
Equipment for Department of Physical Therapy
This subdivision will allow for a proper contract management also in consideration of the different
execution times that will be required for the various groups and components.
3
Bidders must take into account that:
4. The tender is reserved to Italian enterprises only. The Goods and Services to be supplied
under the Contract must have their origin in Italy or supplied through Italian companies
for at least 85% (eight five) of the overall Contract Price, where the country of origin is
limited to European Union, Canada, Japan or the USA, provided Goods of Italian origin
should amount for no less than 10% of the overall Contract Price The remaining Goods
and Services 15% (fifteen) supplied under the Contract may have their origin in Jordan,
and/or in other developing countries Alternative Offers
In order to allow for a proper and objective evaluation of the bids, bidders are requested to quote, in
their main offer, all the listed items provided in these Technical Specifications, and they are not
allowed to add any item. In order to select the best offer, only the main offer will be taken into
consideration. Notwithstanding the above, in order to take the maximum advantage from the
bidders competence and experience, it is possible and advisable for the bidders to provide
alternative offers, pursuant to what indicated in Section 2, ITB Sub-Clause 24. Only the alternative
offer of the successful Bidder will be taken into consideration during Negotiations to finalize the
scope of works and the Contract Price.
5. Works and Goods Included in the Contract
The Supplier is required to:
(i)
supply all the equipment and materials indicated in the item lists provided in each chapter of
the Technical Specifications;
(ii)
properly assemble the equipment and properly install all the necessary connections and
fittings in order to allow the correct functioning of equipment;
(iii)
provide the necessary services for testing and commissioning supplies and components in
order to prove their correct functioning.
In particular, the following will be included in the scope of the contract
(a) The supply, assembly, installation, shipment, training and assistance to commissioning
group 1;
(b) The supply, assembly, installation, shipment, training and assistance to commissioning
group 2;
(c) Training and assistance to commissioning of the fire prevention and the antitheft systems;
(d) Training and assistance to commissioning of the power and heater systems;
6. Works and Goods Not Included in the Contract
The following works and activities will be under the Purchaser’s responsibility and are not included
in the scope of work to be carried out by the Supplier:
(a)
(b)
(c)
(d)
(e)
(f)
Customs clearance;
Assistance to the Supplier’s skilled personnel by unskilled manpower, and supply of
the normal equipment and tools necessary for this purpose;
Final assembly, installation to be realized according to the technical drawings and the
included in the Bidding Documents;
Supply and construction of the complete with their internal electric cables for lighting
and suitable for the installation finishing provided by the Supplier under item No 13;
Wiring for power supply of the above mentioned from point 5(b) to 5(e) and related
mural works for under masonry pipes;
Interpretation services from English into Arab during on-site assembling, installation,
4
(g)
(h)
(i)
training, post-delivery inspection and commissioning;
Any mural/masonry works not mentioned before, but needful for the best quality
result of installation;
Power and water supply.
Commissioning.
7. Units of Measurement
MEASURE
UNIT
NOTATION
meter
m
millimetre
mm
Length
micrometer
µm (or µ)
inch
”
Area
square meter
m2
cubic meter
m3
Volume/Capacity
cubic centimetres
cm3
litre (gas or liquid)
1
seconds
s
hour
h
Time
day
d
year
y
gram
g
Mass
kilogram
kg
cubic meters/hour
m3/h
Volume Flow
cubic meters/seconds
m3/s
litre/seconds
l/s
grams/cubic centimetre g/cm3
Specific Weight
kilograms/cubic meter
kg/m3
bar absolute
bar abs
Pressure
suction lift of pump
m H2O
Vacuum
millimetres of mercury mm Hg or Torr
Temperature
celsius degrees
C°
relative humidity of
Humidity
RH %
percent
calories
Cal
Energy
kilocalories
kcal
watt
W
Power
kilo watts
kW
Speed
meters/second
m/s
Rotating speed
rotation/minute
r/min (or rpm)
Lighting
lumen
Lux
Noise
decibel
Db
Colour Rendering Ra
Ra
Colour Temperature kelvin degrees
K
hertz
Hz
Frequency
kilo-hertz
kHz
million-hertz
MHz
ampere
A
Current
milli-ampere
mA
5
Voltage
microampere
Volt
milli-volt
µA
V
mV
8. Standards
The goods supplied under the Contract shall conform to the standards mentioned in these Technical
Specifications and, when no applicable standards are mentioned, to the authoritative standards
applied in the Hashemite Kingdom of Jordan (HKJ). Such standards shall be the latest issued by
the concerned Jordanian Institution.
In case of conflict between the standards mentioned in this Technical Specifications and the
standards applied in the HKJ, it will be the responsibility of the Supplier to ascertain which
Jordanian standards are applicable to the supplies and ensure compliance with such Jordanian
standards.
In general:
(a) where no Jordanian standards exist, manufacture goods, installation and testing of the
supplies shall be conform to first class engineering practice internationally
recognised, and;
(b) in any other case of conflict between standards, not mentioned above, the standard
which implies the highest quality of work and materials and affords the highest
degree of safety, shall be adopted.
The Supplier must clearly indicate in the Technical Proposal the codes and standards used.
9. Spare Parts, Consumables and Special Tools
Whenever necessary, detailed lists of spare parts and consumables and referred to each item, are
indicated in the relevant chapters of these Technical Specifications.
Bidders are required to:
(a) provide with their offer the prices for all the spare parts and consumables listed in the
Technical Specifications.
(b) provide, in their Technical Proposal, for each spare part and consumable a synthetic
technical description that could allow the Purchaser to identify the item and to
evaluate its responsiveness.
(c) include in the price of each item the price of any special tool that will be necessary
for the normal operation and maintenance by the Purchaser after Contract completion.
(d) provide, in their Technical Proposal, for each special tool a synthetic technical
description that could allow the Purchaser to identify the item.
In addition to the spare parts, consumables and special tools mentioned above, to be used during the
operational phase, the Supplier will have the responsibility to provide, at its care and expenses,
during installation, testing and commissioning all the necessary spare parts, consumables and
special tools. The cost for the use of these spare parts consumables and special tools shall be
included by the bidders in their installation prices.
10. Inspection and Tests
The Supplier is requested to take any action in order to allow and facilitate the inspections that will
be carried out by the Purchaser. Such inspections will take place as follows:
(a) at the place of production or storage in Italy where a general model made by the Supplier of
the showcases must be formally accepted by the Purchaser. The Supplier will bear the costs
6
of return flight tickets (economy class) from Amman the inspection place and the board and
lodging costs in Italy (at the place of inspection) for two inspectors nominated by the
Purchaser;
(b) at the moment of the arrival of every consignment in the Faculty of Rehabilitation Sciences
of the University of Jordan;
(c) at commissioning, and;
(d) in any moment of the assembly in Italy, in Amman or during the warranty period, the
Purchaser or the DGCS reserve the right to conduct any inspection they might deem
necessary.
11. Incidental Services
11.1. Assembling, Installation and Training
The Supplier is required to: (i) specify which items are to be assembled on site as well as provide a
detailed description of how the assembling process shall be carried out, (ii) install all the items
ready for use, and (iii) train the Purchaser’s personnel during assembling and installation in
assembly, start-up, operation maintenance, and repair of the supplied Goods. The Supplier must
take into consideration that assembling and installation services have to be performed according to
the indications and drawings included in this Technical Specifications. Furthermore, the Supplier is
required to submit a detailed technical explanation and action plan (i.e. timing, personnel, special
tools, spare parts, consumables, didactical material for training, etc.) necessary for the performance
of assembling, installation and training services. The training services to be provided must be
carried out in English language.
The Supplier shall quote assembly, installation and training as one single item for each one of the 7
(seven) components, as indicated in the Price Schedule. All costs regarding special tools, spare parts
and consumables necessary for the assembling and installation are to be borne by the Supplier and
their cost shall be included in the installation cost.
11.2. On-Site Commissioning
Commissioning will take place after the installation of all Goods is completed. The Supplier shall
provide all apparatus, assistance, documents, equipment, instruments, personnel (except unskilled
labour and operating staff provided by Purchaser) and all the information necessary to efficiently
carry out the relevant tests. The Supplier shall guarantee the presence of at least one expert for a
minimum of 30 (thirty) calendar days. The Supplier shall furnish a detailed technical explanation
and action plan of all the tasks and resources needed to efficiently carry out commissioning (i.e.
timing, special apparatus, assistance, documents, equipment, instruments, personnel etc.)
At commissioning completion, provided that all the technical requirements are satisfied (including
the acceptance of manuals in Jordanian and English language) the Purchaser will release to the
Supplier the Provisional Acceptance Certificate.
Commissioning will be performed only once during the contract after all Goods have been installed.
The Supplier must quote the price for its services related to commissioning of Groups 1 and 2 as a
single item according to what indicated in the Price Schedule.
11.3. Manuals
7
Manuals for installation, operation, maintenance, spare parts selection and safety instruction, must
be supplied for all the items. The manuals should be properly bound in order to allow for an easy
access to the specific information needed for each item.
Specific separate sections must be foreseen for each single item. The manuals must give sufficiently
detailed information so as to enable the Purchaser to easily maintain, dismantle, readily identify and
order spare parts, reassemble and adjust all part of the supply.
The Manuals shall comprise the following information:
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
Technical and design data, including material, class and manufacturer, compliance
with standards and laws
Assembling and installation instructions including step-by-step check lists for
commissioning
List of devices necessary for installation, operation, maintenance, inspection and
testing of the equipment
Safety procedures and guidelines to be followed during installation, operation and
maintenance of the plan
Operating and maintenance instructions, including sequence of operations,
maintenance schedule and recommended procedures for repair and lubrication of
particular parts
Specifications and consumption rates of lubricants and oil and other consumption
materials
Guarantees
Test procedures
Single line diagrams showing the principal electrical connections
Any additional information, if any, referred to specific items indicated in the
Technical Specifications
Any additional information deemed necessary by the Supplier
All script and sentences of any technical document must be both in English and Arabic language.
Two (2) copies of each technical document must be supplied, one shall by enclosed in the package
together with the relevant Goods as specified in GCC Sub-Clause 9.5, and the other can be
delivered by mail or by hand.
The Supplier shall quote manuals as one single item for each one of the 2 (two) groups, as indicated
in the item lists and in the Price Schedule.
12. Tentative Execution Schedule Diagram
A description of the Tentative Execution Schedule is detailed in Section 6, Schedule of
Requirements - TESD of the Bidding Documents.
8
II. Technical Requirements
13. General Requirements
The position of each equipment has been illustrated in the General Plan Drawing where are also indicated the platforms linked to the floor (see
Drawing 1 – 2 and 3 in Section A9).
243 (two hundred forty three) types of goods are identified in this document with the following labels: GROUP. I from n. A 1 to n. A 183 GROUP. II from n. B 1 to n. B 60
14. Item list Group I – Tools & Equipments for Orthotics & prosthetics workshop
N
Item
A1
Electric Cast Cutter
A2
Pneumatic oscillating cast cutter
A3
Pneumatic Chisel
A4
A5
A6
A7
Blacksmiths Hummer
Blacksmiths Hummer
Blacksmiths Hummer
Blacksmiths Hummer
A8
Mallet
Description
Unit
Quantity
With speed controller, includes a power cord
that is at least 3 metre long with grounded
plug & one saw blade with diameter 50 & 65
mm. 1*220V/N/PE; 50 Hz; 0.18kW.
Includes drill stop, exhaust hose, her head
wrench, fork wrench, & sted circular saw
blade.
With two chisels, one is at least 25cm long &
2cm width, & the other is at least 17cm long
and 5cm width.
Head weight 100g, total weight around 150g.
Head weight 300g, total weight around 400g.
Head weight 500g, total weight around 600g.
Head weight 1000g, total weight around
1200g.
One rubber & one plastic head, total weight
around 350g.
Pc
6
Pc
2
Pc
2
Pc
Pc
Pc
Pc
3
3
3
3
Pc
6
9
A9
Trash Container
A 10
Plastic Basin
A 11
A 12
A 13
A 14
Plastic, with three wheels, diameter around
70cm, height around 40 cm.
Pc
4
With wheels, dimensions around L x W x H
80 x 60 x 40 cm.
Suction Pipe Support
With two clamps & four angle joints, for item
No. A 10.
Thermal Gloves with cuff
Natural terry cloth cotton fabric.
Oven
For heating thermoplastic sheets & drying
plaster models. With two stainless steel doors.
With fans for forced air circulation.
Temperature selector. With microprocessor
with at least three term regulator. Two chrome
oven racks. With windows. Interior
dimensions at least W x H x D 110 x 130 x 70
cm. Temperature range up to 350°. Power
requirement = 3 * 400 V/N/PE; 50-60Hz, 5.0
KW.
Two channels vacuum pipe, straight Diameter between 30 and 40 mm, with seal
rings.
Pc
2
Pc
2
Pair
Pc
3
2
Pc
20
A 15
Two way vacuum pipe
Diameter between 20 and 30 mm.
Pc
20
A 16
Cabinet
Sheet metal. Double door. Dimension WxH
1x 2 m, depth 50 cm.
Pc
8
A 17
Swivel chair
Pc
10
A 18
A 19
Visitors chair
Corner desk
On rollers, with arm rests, adjustable to body
weight.
Durable artificial leather covering.
Table top of desk & added table with plastic
coating, three draws on left & right sides,
dimensions of desk around (± 10 cm) W x D x
H 165 x 80 x 70cm, dimensions of added table
around (± 10 cm) W x D x H 125 x 60 x 70
cm.
Pc
Pc
2
1
10
A 20
Container with fixed wheels
Capacity between 200 and 300 liter. Made of
plastic.
Includes leveling feet, adjustable back rest,
dimensions around (± 10 cm) L x W x H 200
x 65 x 65 cm .made of chrome with durable
artificial leather covering. Max load: 140 kg.
Screen size around L x W 100 x 50 cm. Power
requirements: 1*230 V/N/PE; 50Hz.
Pc
1
A 21
Examination table
Pc
3
A 22
X-Ray light cabinet
Pc
1
A 23
Parallel Bars
Steel construction, height adjustable from
around 70 to 100 cm, bases with floor plates
& attachment pieces. No cross braces between
bars one of them 5 m long, the other between
3.5 to 4 m.
Dimensions around 2 x 1m, fixed.
Stainless sheet steel table top cover, two steel
shelves on the left & right, dimensions around
(± 10 cm) L x W x H 180 x 90 x 85cm.
Pc
2
A 24
A 25
Mirror
Casting table
Pc
Pc
2
2
A 26
Mirror
Movable over four wheels, dimensions around
(± 10 cm) H x W 180 x 60 cm
Pc
1
A 27
Vacuum Pipe vise
Pc
3
A 28
Wire cutter
Includes work bench holder, rotates &
telescopes, jaw span around 2 to 8 cm, jaw
width between 10 and 15 cm.
For hard wire, PVC coated handles, polished
head, length not less than 20 cm.
Pc
12
A 29
High leverage side cutting pliers
Coated handles.
Pc
3
A 30
A 31
Combination pliers
Punch set
Pc
Pc
7
2
A 32
Curved seaming pliers
Coated handles.
Punch set of 6 pieces, Head diameter
2/2.5/3/3.5/4 and 5mm.
Forged steel. Jaw width more than 15 mm and
6.5 mm length around 200 mm.
Pc
2
11
A 33
A 34
A 35
Leather Scissors
Tailors Scissors
Hole punch set
A 36
Rivet Header
A 37
A 38
Staple gun
Squirrel Hair Brush
A 39
Zigzag sewing machine
A 40
Work bench with cabinet
A 41
Peg board for tool storage
A 42
Accessories for the peg board
1. Hooks
2. Hooks
3. Double Hooks
4. Plier holder
With serrated cutting edges.
Heavy duty.
20 Pieces with different hole sizes in a
wooden case.
Chrome-vanadium steel with protective clamp
ends.
For heavy duty work.
Plastic, used for glue. Width not less than 20
cm, light weight.
Adjustable zigzag stitch, pressure foot lifted
by knee lever, operation through motor stand.
Use on light to medium-weight materials.
Power cord that is not shorter than 2 metres
with grounded plug. power requirement = 1 *
230 V/N/PE; 50-60Hz, 0.25 KW.
Work bench top with parquet red bench wood.
Around 70 cm deep, 5 cm thick work bench
cabinet W x D x H around (± 10 cm) 60 x 60
x 80 cm (at least 4 or more metal drawers)
work surface height 85 to 90 cm, bench top
length = 150 cm. weight of the bench around
100 kg (± 20 kg).
Has a frame which mounts to the back of the
work bench requested for item A 40.
Length 50 mm
Pc
Pc
Set
2
14
1
Pc
2
Pc
Pc
2
3
Pc
1
Pc
25
Pc
27
PCK =
5Pcs
Length = 75 mm
PCK =
5Pcs
With vertical closure for hanging tools length PCK =
= 50 mm
5Pcs
PCK =
12
27
27
27
27
5. Tool clamp
6. Tool clamp
7. Tool clamp
8. Tool clamp
A 43
9.Holder for storage boxes
10. Holder for storage boxes
11.Material bowel (storage boxes)
12. Material bowl (storage boxes)
13. material bowl (storage boxes)
Media channel 4500 3mm
A 44
A 45
A 46
Scriber
Screw driver
Phillips head screw driver
A 47
Ball hex head, screw driver
A 48
Ball hex head, screw driver
A 49
Adjustable Pin Wrench
5Pcs
Diameter = 10 mm
PCK =
5Pcs
Diameter = 16 mm
PCK =
5Pcs
Diameter = 25 mm
PCK =
5Pcs
Diameter = 32 mm
PCK =
5Pcs
Width = 100 mm, height = 75 mm
Pc
Width = 450 mm, height 75 mm
Pc
Dimensions = 105 x 85, height 50 mm
Pc
105 x 160 mm, height 80 mm
Pc
Dimension 145 x 235 mm, height 125 mm.
Pc
For installation above the peg boards for tool
Pc
storage of the work benches, length 450 cm.
Components in it: 7 shock-proof sockets 220
v, 7 pneumatic quick-acting, coupling each for
oiled & non-oiled connection, parts & 4 m
connection cable.
Steel
Pc
6 parts in wooden stand
Set
Size 2, blade length 100 mm + Phillips recess
Pc
Ball hex head dimension = 4 mm. Blade
length = 180 mm
Ball hex head dimension = 5 mm. Blade
length = 195 mm
For 2 hole nuts, size 2.5 / 3 /4 /5 /6 /8 /10 mm
13
27
27
27
27
81
27
27
27
27
4
10
5
5
Pc
5
Pc
5
Pc
5
A 50
T-Handled square socket wrench
Size 12 mm, length 125 mm. for single axis
ankle joint.
Pc
4
A 51
Square socket wrench
Pc
2
A 52
A 53
Square End knee bolt wrench
T-Handled hex socket wrench
Round steel shaft, size 12 mm, length 530
mm.
Adjustable crank, end 5 mm for knee.
With mandril diameter 10 x 200 mm, size 14 x
17 mm.
Pc
Pc
2
4
A 54
Wire Cutter
Pc
5
A 55
Long nose pliers
Special steel, oil hardened cutting, edges
inductively hardened, for hard wire, Length
not less than 20 cm, max wire circumference
= 2.75 mm
Oil hardened. PVC coated handles. Polished
head
Pc
5
A 56
A 57
Round nose pliers
Vise grip pliers
Pc
Pc
5
5
A 58
Universal Pliers
Pc
5
A 59
A 60
Leather Knife
Pipe Reamer
Pc
Pc
10
5
A 61
Metal round file
Pc
15
A 62
Square metal file
A 63
A 64
A 65
A 66
Jaws of chrome vanadium steel. Adjustable
jaw opening. Length not less than 20 cm,
weight between 0.5 and 1 Kg.
PVC coated handles. with slotted joint.
Polished head.
Blade tapered to a point, wooden handle.
For deburring inside & outside edges of cut
pipes. dimensions = 40 mm.
Pc
15
Metal warding file set
Wood rasp, half round
Cabinet rasp , half round (metal)
(for metals), cut = medium, length not less
than 20 cm, weight not more than 0.25 Kg.
(for metals), cut = medium, Length not less
than 20 cm, weight not more than 0.25 Kg.
6 PCs, in PVC containers, with handle.
Without handle, medium cut
Without hand, medium cut
Set
Pc
Pc
2
10
10
Rivet header
Octagonal shaft, flat head. rivet diameter 3
Pc
10
14
A 67
Rivet header
A 68
Rivet Set
A 69
Rivet Set
A 70
Screw clamps
A 71
Truss button Jig
A 72
Vise clamp
A 73
Lead block
A 74
A 75
Riveting bar
Small Anvils
A 76
A 77
File card
Storage container
A 78
Piercing awl
A 79
A 80
Drilling fixture
Bending iron
A 81
Bending iron
mm.
Octagonal shaft, flat head. rivet diameter 4
mm
Octagonal shaft, flat head. rivet diameter 3
mm
Octagonal shaft, flat head. rivet diameter 4
mm
With contoured steel sliding guide & wooden
handle. Clamp width = 500 mm, throat = 120
mm.
Forged steel, with 2 holes for riveting truss
buttons.
Mouth opening not less than 2 cm. Saw width
around 40 mm
To clamp in vise, length not less than 10 cm,
width not less than 5 cm height not less than
5 cm. Weight not less than 5.000kg
With riveting hole
1 set = 1 each (flat, concave, convex), forged
steel for riveting bar item number A74,
Weight = 0.060kg
Plastic with flat brush for glue. volume 900 L
, 330 kg.
With round blade & plastic handle, blade
length not less than 8 cm, dimension 6 mm.
For exact positioning of the holes
Chrome vanadium steel, with flat tines mouth
opening 4 & 6 mm, length more than 20 cm.
Chrome vanadium steel, with flat tines mouth
opening 6 & 8 mm, length more than 20 cm.
15
Pc
10
Pc
10
Pc
10
Pc
5
Pc
10
Pc
10
Pc
5
Pc
Set
5
5
Pc
Pc
10
5
Pc
10
Pc
Pc
5
20
Pc
20
A 82
Bending iron
A 83
Deburring knife
A 84
Bench vise
A 85
Vise jaw protector
A 86
Vise lift assist with floor stand
A 87
Sheet metal shears with hand lever
A 88
Frame stand for sheet metal shears
A 89
Storage cabinet
Tool steel for shopping the side bar, in sagittal
plane, semi circular, tines for 16 & 20 mm
side bars width.
For plastics & metals, removable &
replaceable blade, plastic handle with storage
compartment.
Forged steel, front opening, surface hardened
jaws, adjustable, hardened guide rail,
hardened anvil, holder for swivel jaw
protector, round stable forged vise base, jaw
width 140 mm, jaw opening around 200 mm,
hole145 mm.
Accessories for the bench vise requested,
plastic.
Pc
5
Pc
10
Pc
37
Pair
37
Accessories with pneumatic spring, adjustable
height from around (± 10 cm) 85 to 110 cm,
(mounting plate accepts bench vise) swivels,
for attachment to work benches with a work
surface height from around (± 10 cm) 80 to 25
cm, drilled for bench vises includes materials
for mounting.
Steel body, with one blade as each for steel
sheets and steel rods, cutting capacity: steel
sheets up to 6 mm thick, steel bars up to 70 x
7 mm, steel rods up to 13 mm diameter
Accessories for item sheet metal shears with
hand lever. No mounting holes.
Pc
27
Pc
1
Pc
1
Sheet metal. Double-winged door with safety
lock. 4 height adjustable shelves. Dimensions
W x H around (± 10 cm) 1000 mm x 2000,
Depth around (± 10 cm) 500mm, Maximum
Pc
12
16
Load around 100 kg , Weight around 85 kg.
A 90
A 91
A 92
Heating plate
Heats thermoplastics, adjustable temperature.
Heating surfaces are coated with Teflon
sheeting, the cover has a counter pressed top.
2 or more gas cylinders assist in lifting the
cover & hold it open. The heating plate is
equipped with an adjustable closing clamp.
Electric equipment: digital timer , at least 2.5
metre power cord with CEF plug 5 x 16 A &
CEF socket 5 x 16 A. Heating surface around
(± 10 cm) 85 x 110 cm . Dimensions W x H x
D around (± 10 cm) 110 x 150 x 90 cm. Power
requirements: 3*400 V/N/PE; 50-60Hz; 4.35
or 6 kW.
Shelf for the heat plate requested in Batten board with edge band
A 90.
Pc
1
Pc
1
Oven with window
Pc
1
For heating thermoplastic sheets, suitable for
vacuum forming using vacuum inserts as well
as for drying plaster models & for sintering
techniques. 2 doors, stainless steel interior +
fans for forced air circulation, microprocessor
three or more -term action, regulator with
LED-display, ventilation adjustment diameter
50 mm, electronic wear-free two chrome oven
racks + interior light. Electric equipment: at
least 2 m power cord with CEE plug 5 x 16 A
& socket 5 x 16 A. Exterior dimension around
(± 10 cm) W x H x D 120 x 120 x 85 cm.
Interior dimension around (± 10 cm) W x H x
D around 100 x 80 x 50 cm with a total
internal volume of around 400 liters.
17
A 93
A 94
Temperature range up to 300 C. Power
requirement = 3 * 400 V/N/PE; 50-60Hz, 3.4
KW
Accessories for item A 92: Support Dimensions suitable for the oven mentioned in
for the oven (table)
item A 92.
Floor model Drill press
Accessories
1. key type drill chuck
2.
3.
4.
quick chuck
quick chuck
Morse taper
5.
morse taper
A 95
Tool cabinet
A 96
Drill arm
Pc
1
Infinitely variable speed control, around (± 10
cm) 35 x 25 cm work surface, height
adjustable on a geared steering rack. Digital
drilling depth display, drilling adjustable
spindle stop, digital speed display. Available
without chuck & without morse taper.
Electrical equipment: Motor protection switch
with under-voltage release, emergency power
shut-off, hand reversing switch for changing
the drilling direction and light (two bulbs
included) at least 2 m power cord with CEE
plug 5 x 16 A & CEE Socket 5 x 16 A power
requirement = 3 * 400 V/N/PE; 50Hz, 0.8 KW
Pc
2
Span range 1-13 m, accepts B16 with chuck
key
Span range 1-13 mm, accepts B16.
Span range 1-13 mm, accepts B18
Accepts B16, tape MK2, for accessories for
key type drill chuck & quick chuck
Accepts B18, taper M12 for accessories the
quick chuck (which accepts B18)
Pc
2
Pc
Pc
Pc
2
2
2
Pc
2
Sheet metal, one door with cylinder lock.
Includes one drawer & two sliding shelves.
dimensions around (± 10 cm) W x D x H = 50
x 50 x 100 cm
For working on the drill table, working radius
Pc
2
Pc
2
18
A 97
Drill vise
A 98
Sharpening stones
A 99
Twist drill set
A 100
Twist drill set
A 101
Forstner bit set
A 102
Valve hole cutter
A 103
Tapered cutter
= 420 mm .
Suitable for use with the benches required
before & floor model presses, with prismatic
jaws.
For the tapered cutter required in the tender. 1
set = 2 PCs
Clock wise cutting, cylindrical shaft Set = 50
PCs. diameter 1.0 - 5.9 mm. increasing by 0.1
mm.
Clock wise cutting, cylindrical shaft. Set = 25
PCs. Diameter 1.0 - 13.0 mm increasing by
0.5 mm
Tool steel, for wood, clockwise cutting set =
15 PCs (for the floor model drill) diameter 10,
12, 14, 16, 20, 22, 24, 25, 26, 28, 30, 32, 35,
& 40 mm.
Pc
2
Set
2
Set
2
Set
2
Set
2
For the floor model drill press. For flat rubber
valves, diameter (for valve seat) 27 mm,40
mm. shaft diameter 10 mm.
Pc
1
For (floor model drill press); for plastics,
diameter 14 mm, shaft diameter 6 mm
Pc
2
19
A 104
Tapered cutter
For (floor model drill press); diameter 20 mm;
Shaft diameter 8 mm
Pc
2
A 105
Tapered cutter
For (floor model drill press); diameter 30 mm;
Shaft diameter 9 mm
Pc
2
A 106
Cutter with guide pin
For the floor model drill press, tool steel with
4 blades, to enlarge the SACH foot bolt holes,
with 2 interchangeable taps for 8 & 10 m
SACH foot bolts.
Pc
2
A 107
Cutter
For floor model drill press 3 cutting blades;
outside diameter = 13.5 mm; Shaft diameter =
10 mm; Pin diameter 5.5 mm
Pc
2
A 108
Cutter
For floor model drill press, HSS, 3 cutting
blades. outside diameter = 20 mm; Shaft
dimension = 15.8 mm; Pin dimension = 5 mm
Pc
2
A 109
T.handled Hex wrench
3mm
Pc
4
20
A 110
T.handled Hex wrench
4mm
Pc
4
A 111
T.handled Hex wrench
5mm
Pc
4
A 112
T.handled Hex wrench
6mm
Pc
4
A 113
T.handled Hex socket wrench
10mm
Pc
2
A 114
T.handled Hex socket wrench
11mm
Pc
2
A 115
T.handled Hex socket wrench
17mm
Pc
2
21
A 116
Open end wrench set
Set = 4 Pcs. Sizes = 6x7, 8x 9, 10x11, 12x13,
14x15, 16x17, 18x19, & 20x22mm
Set
4
A 117
Box & wrench set
Set = 8 PCs. Sizes = 6x7, 8x 9, 10x11, 12x13,
14x15, 16x17, 18x19, & 20x22mm
Set
4
A 118
heet metal shears
HSS cutting edges, for stainless steel sheets
Pc
4
A 119
Electronic reversible hand drill
Pc
4
A 120
Electric jig saw
Pc
2
A 121
Storage cabinet for small pieces
Anti vibration system, adjustable rotation
speed using the set wheel 2 gear drive in
stable plastic housing, reversible & bitdirected retainer, drill& key. Includes: quick
acting drill chuck, at least 3 m power cord
with grounded plug. Power requirements:
1*230 V/N/PE; 50 Hz; 1.2 kW.
Keyless chuck system. For changing saw
blades, removable plastic guide for protection,
at least 4 m power cord with grounded plug
(with plastic case, 5 saw blades, chip protector
offset screwdriver). Power requirements:
1*230 V/N/PE; 50 Hz; 0.75 kW.
Plastic drawers with table holders, safety stop
prevent drawer from falling out for all
machine & equipment in workshop, height
around 40 cm, No. of drawers = 36, Weight
Pc
2
22
around 4 kg
A 122
Shelf system/basic unit
A 123
Shelf system-add on unit
A 124
Shelf
A 125
Cross strut .
A 126
Shelving for sheet material storage
A 127
Shelving for bar stock storage
A 128
Examination table
For versatile & easily adjustable set-ups.
Simple slot construction, heavy duty strength.
Basic unit consists of: one base plate, one top
plate & 4 corner posts.
Accessories for the shelf system. For versatile
& easily adjustable set-ups. Simple slot
construct, add on unit consists of: one base
plate, one top plate & two corner posts.
Accessories for Shelf system/basic unit,
shelves are slotted in
(Increment accessories for shelf system/basic
unit)., A cross strut is needed for every 3
shelves.
Plastic coated steel consisting of 2 support
frames & 4 shelves (for 2000 x 1000 mm
sized sheets), Dimensions around (± 10 cm)
WxHxD 230 x 250 x 110 cm, shelf depth
around 110 cm, load capacity per shelf 600
kg, total maximum load capacity 6000 kg.
Weight should be less than 200 Kg.
Plastic coated steel consisting of: 2 stands,
Height around 190 cm with front angle, 2
Horizontal connection bars, length around 100
cm, 1 horizontal support bar with 5 supporting
arms Dimensions around (± 10 cm) WxDxH
100 x 60 x 200 cm. Weight should be around
50 Kg.
Adjustable back rest, Dimensions LxWxH
around (± 10 cm) 200 x 65 x 65 cm. 70 mm
thick pad with artificial leather light beige
23
Pc
3
Pc
5
Pc
40
Pc
2
Pc
1
Pc
1
Pc
2
covering. Weight should be less than 50 Kg.
A 129
A 130
A 131
Paper towel holder
Table for fitting room
Stackable chair
For 500 mm wide rolls
W X H X D 60 X 60 X 60 cm
Plastic fixed foot caps, antistatic, smooth,
polished surface, easy to clean
Pc
Pc
Pc
5
4
10
A 132
Cart for plaster bandages
Pc
2
A 133
Tailor’s measuring tape
With 2 drawers + 2 swing doors. Seamless
table top with 3 sided gallery, adjustable
plastic shelf, push handle & 4 wheels
graduated in millimeters.+ 2 stainless steel
basin for soaking plaster bandages.
Graduated in millimeters. Length = 1.5 m.
Width = 20 mm, very light weight.
Pc
2
A 134
Hip leveling guide
Aluminum, with plastic side extensions for
measuring lateral pelvis tilt.
Pc
4
A 135
Compensation board set
Set
2
A 136
A 137
Protractor
Contour tracer
Pc
Pc
20
2
A 138
Plaster cast cutter
Ply wood, 6 boards = 5, 10, 15, 20, 25, & 30
mm thick.
Accessories for the cart, plastic
Plastic, for vertical tracing of various body
contours, with guide for drawing pencil.
Stainless steel (scissors) with eccentric
closure, serrated lower cutting edge.
Pc
5
A 139
Surgical scissors
Pc
5
A 140
A 141
Plaster knife
Stockinette holder
With eccentric closure, serrated lower cutting
edge.
Stainless steel. serrated lower cutting edge
For securing the stockenette when making a
plaster cast, elastic strap with clip closures
Pc
Pc
10
10
24
For functional casting during weight bearing
with base plate. Basic set consists of; casting
rings (set of 4 pcs, plastic, inside diameter
103, 113, 126, & 135 mm)
Accessories: casting plate form
Accessories for the casting apparatus for
weight bearing casting of knee or hip
disarticulation with 2 PCs block.
pneumatic SIT* plaster casting Provides functional casting of ischial
apparatus
containment sockets while bearing weight.
Has a pneumatic pressure adjustment
(maximum pressure of 3 bar) & a short-stroke
(less than 10 cm maximum stroke) cylinder
Pressure regulator provides individual
pressure adjustment for the femoral pad. The
pneumatic unit of the SIT * cast apparatus can
be directly connected to the compressed air
supply system.
Body calliper
Used for body segments. Suitable for above
knee stumps, scale no less than 60 cm.
Pc
1
Pc
1
Pc
2
Pc
2
A 146
High leverage site cutting pliers
PVC coated handles
Pc
5
A 147
Grinding & milling machine
Pc
7
A 148
Insulating mat
Pc
8
A 149
Arbour
Brand new grinding & milling machine with
brake to stop the shaft upon shutting-off the
machine, emergency (safety) power shut-off
should be included, motor should provide a
minimum of two speeds. 5/8 inch thread. If
the machine is to be bolted to the floor,
fastening screws should be included. Power
requirements: 3*400 V/N/PE; 50-60 Hz; 1.5
kW
Vibration & noise absorber, 550 x 500 mm.
Each mat should weigh less than 5 Kg.
Arbour with M16 thread & 14 mm threaded
Pc
3
A 142
A 143
A 144
A 145
Casting apparatus
25
A 150
Alignment apparatus
A 151
Hot air gun
A 152
Hand sealing iron
A 153
Swivel base (mount)
A 154
Bench cabinet
A 155
Vacuum machine
A 156
Electronic scale
A 157
Shoemaker hammer
screw
Alignment apparatus for duplicating the
alignment of lower limb modular &
crustacean prosthesis. This should include:
different heights heel blocks ranging
approximately between 10 & 50 mm, foot
patterns ranging approximately between 15 &
30 cm, adapter fittings, guide base used for
making cross cuts in wood & rigid foams
while the different parts of the prosthesis are
mounted to the alignment apparatus, and
clamp for holding tube adapters.
With
adjustable
temperature.
Power
requirements: 1*230 V/N/PE; 50Hz; 2kW
2
Pc
6
Suitable for PVC & PVA sheet sealing, Teflon
coated ironing surface, adjustable temperature.
Power requirements: 1*230 V/N/PE; 50-60
Hz; 0.2 kW.
Metal, provides circular motion, suitable for
item No. A 84
Pc
2
Pc
12
Size no more than 80*60*150 cm, with
ventilation unit installed in, contains several
compartments & shelves to suit PVA rolls,
small plastic sheets, vacuum machines, etc.
For laminating under vacuum, with 40 meters
of suitable suction tubes included. Power
requirements: 1*230 V/N/PE ; 50 Hz; 0.11
kW.
Electronic small sized top-bench scale,
weighting range up to 6000 g
Pc
2
Pc
3
Pc
2
With the handle (wooden) included, no less
than 300g head weight.
Pc
7
26
A 158
Straight leather scissors
Straight, made of strengthened steel, with
serrated cutting edges.
Pc
4
A 159
Curved leather scissors
Curved, made of strengthened steel, with
serrated cutting edges.
Pc
4
A 160
Foot measuring device
Made of strengthened plastic, used to
determine foot sizes.
Cobbler’s stand
For making shoes, adjustable length to no
more than 1 meter, with at least seven inserts,
should be made of strengthened steel.
Speed sole press
Sole (and heel) press, works on pressurized
air. Different kinds of cushions (half-size, fullsize, high, etc) should be included. At least 2.0
m power cord with CEE plug 5 * 16 & CEE
socket 5 * 16 Power requirement = 3 * 400
V/N/PE, 50-60 Hz, 0.55 KW
Work bench
Wooden top 50 mm thick,700 mm deep,
metallic frame, with several drawers &
shelves, work surface height not less than 80
cm, bench top length 1500 mm
Optical orthopedic alignment device This equipment (can be portable) is used to
help align prostheses and orthoses. It should
provide visual means that is seen by the naked
eye (preferably laser) to help in aligning
appliances. Force platforms to measure
ground reaction forces, positioning system
with electronic sensors & motors and step
motor and plate for leveling should be
included. The dimensions should not exceed
15 cm x 150 cm x 60 cm. power requirements:
1x230 V/N/PE; 50 Hz.
Pc
2
Pc
1
Pc
1
Pc
4
Pc
1
A 161
A 162
A 163
A 164
27
A 165
CAD-CAM Forming machine
A 166
Swivel stool with rolling casters
A 167
Upright cabinet
A 168
CAD-CAM forming machine with size no
more than 150* 60*150 cm. Grinding and
milling machine should be as accurate as
possible and should be completely compatible
with the software assigned for the CAD-CAM
machine, the grinding and milling machine is
controlled by at least six robotic hands to
allow as much as possible degrees of freedom
for forming models. The software programme
should allow for storage and modification of
pre-scanned models. A non-contact 3-D
digitizer (with highest possible accuracy) to
scan the models (stumps and casts) should be
included and compatible with the software and
hardware of the machine. Precise measuring
devices (callipers and other devices) should be
included
to provide for dimensions
reproducibility. Power requirement = 3 * 400
V/N/PE, 50-60 Hz.
Fixed foot caps, height adjustable from around
40 to 60 cm using gas cylinders.
Pc
1
Pc
2
2 structural glass sliding doors locking, 3
adjustable glass shelves, H x W x D around
(±5 cm) 80 x 80 x 15 cm, around 20 kg (±
3kg)
Plaster room shelving unit-basic A basic unit consists of 2 support pairs- 4
unit
shelves-2 grated shelves -4 reinforcement tie
bars-6 supporting connectors-1 diagonal cross
brace-16 shelves supports. H X W X D around
(±10 cm) 200 X 100 X 50 cm, shelve depth
around 50 cm
Pc
2
Pc
1
28
Plaster room shelving unit-add-on Accessories for item NO. A 168,add –on unit
unit
consists of 1 support pair,4 shelves, 2 grated
shelves, 4reinforcement tie bars, 3 supporting
connectors, 1 diagonal cross brace, 16 shelves
support, H X W X D around (±10 cm) 200 X
100 X 50 cm, shelve depth 50 cm
Shoe maker’s bench
Top from parqueted red bench wood, 50 mm
thick, 700 mm deep, work surface height
around 70 cm, bench top length around 150
cm
Shoe maker’s stool
It should have four legs and cross frame, seat
height no less than 45 cm.
Pc
4
Pc
2
Pc
6
A 172
Vacuum forming apparatus
Pc
1
A 173
Lockstitch sewing machine
Pc
1
A 174
Shoe patching machine
Pc
1
A 169
A 170
A 171
The apparatus comes with uni-lock central
clamping system, and is electronically time
controlled. Approx. 3.0 m power cord with
CEE plug 5 * 16 , & CEE socket 5 * 16, with
power requirement 3 * 400 V/N/PE, 50 Hz,
5.9; KW
Comes with a long slender sewing arm,
suitable for sewing heavy materials, contact
pressure should be adjustable. Needles gauge
5 mm and 6 mm should be provided. Approx.
3 m power cord with CEE plug 5 * 16, & CEE
socket 5 * 16 , with power requirement 3 *
400 V/N/PE, 50 -60 Hz; 0.55 KW
Top feed is rotatable in all directions, should
be suitable for sewing all kinds of leather and
shoes. Approx. 2 m power cord with grounded
plug, resp. CEE plug 5 * 16 & CEE socket 5 *
16, motor operator with power requirement 3
* 400 V/N/PE, 50 Hz.
29
A 175
Sanding belt
A 176
Lamination bench
A 177
Fire resistant storage cabinet
A 178
Spray coating booth with ventilator
A 179
Mobile vacuum machine
One or two speed floor model sanding belt,
with table with guide rails and adjustable slop
angle, with a dust collector attached. Power
requirements: 3x400 V/PE; 50 Hz; 3
kW.dimension= W x D x H = 800 x 850 x
1520 mm
A work bench with enclosed back and sides
with a set of drawers and shelves,
approximately 85 cm high work surface, table
top depth of around (±10 cm) 70 cm x 150 cm
length
A storage cabinet that is fire resistant in which
flammable materials can be stored. Outer
dimensions are around (±10 cm) H x W x D
200 x 60 x 60 cm, shelves as storage levels,
height adjustable, spacing around 30 mm
Booth for spray coating technique, with a
work space that is no less than 1*1*1 m. The
booth should come with a ventilator that
provides air quantity no less than 2000 m3 /h.
Exhaust pipes leading from the booth to the
outside should be included. A coating kit
composed of an attachment spray gun,
pressurised canister and a pressure reducer
should also be included. Power requirements:
1*230 V/N/PE; 50 Hz
Mobile vacuum forming machine suitable for
forming thermoplastic sheet materials, a water
trap should be part of the machine, at least 4
m power cord should be included. Power
requirements: 1*230 V/N/PE; 50 Hz
30
PC
1
Pc
4
Pc
2
Pc
1
Pc
3
A 180
Modular spinal casting apparatus
A 181
Modular traction unit
A 182
Outer ring
A 183
Frame plate
Casting frame allows posturing of the patient
as required for full body casting, cervical
casting is also possible in combination with a
modular traction unit. Foot plate may be tilted,
adjustable padded knee cushions and
adjustable hand grips construction: modular,
galvanized steel tubes with quick acting screw
clamps; space required around (±10 cm) 60 x
85 cm.
For connection to modular spinal casting
apparatus with head extension sling, and selfadjusting pulley above the body's center of
gravity. Construction: modular, galvanized
steel tubes with quick acting screw clamps,
height including base 600 mm
Aluminum, interior diameter 360 mm up to 20
mm material thicknesses.
Ps
1
Ps
1
Ps
5
Aluminum, interior diameter 260 mm, for
vacuum forming small models.
Ps
5
15. Item list Group II – Equipment for Department of Physical Therapy
N.
B1
Item
Measurement set
Description
Set composed by plumb-line, mercury goniometer ,
electrogoniometer, kyphometer, analyzer measuring
differences in hipbone height due to lower limb
asymmetry
31
Unit
Quantity.
kit
3
B2
Podoscope
B3
Baropodometer
B4
Gait Lab
Podoscope for the plantar analysis of feet; varnished
wooden supporting structure, Chrystal load base,
underlying mirror attached to panel, double-side
illumination system by polarized high-effect lamps,
back-guide in transparent plexiglass with goniometer .
Dim.ca. cm. 46x55x33 h. capacity 200kg.
Modular electronic baropodometer composed by a total
sensory platform at least cm 240x40, software for static
and dynamic acquisition of plantar pressure, and
possibility of postural feedback. Software for the
automatic interpretation of data. Complete with PC, 24"
colored monitor, printer and cart
Gait Analysis System includes a PC and a Printer. 12
optoelectronic infrared video cameras that can capture
reflections from passive markers.with at least 120
frame/second of sampling frequency. One of the
infrared cameras at least should be provided with an
integrated CTVs for video recording and real time
display of the patient’s movement Support mounts for
clamping and positioning of cameras should be
provided.
Walking surface: Modular platform for integration in
terms of force platforms.
Force platforms: 4 Multi-axial force platforms based
on piezoelectric or strain gauge sensors to record the 3
components of ground reaction force, moments, Centre
of Pressure (COP) coordinates, and the torsion moment.
Integrated with kinematics, the system also calculates
32
Unit
1
Unit
1
system
1
moment and powers within the joints. Dimensions:
Length should be between 0.8 and 1.2 m, Width should
be between 0.4 and 0.8 m.
Control screen: 60” plasma monitor.
Wireless electromyographic: Probes: 8 wireless
electromyographic probes, 16bit/ up to 4 kHz. Light,
miniaturizing and wireless, they do not affect the
patient’s natural movements and can be placed on the
muscles by simply applying pressure to the pre-gelled
adhesive electrodes. The synchronisation of the
electromyographic signal with the kinematics and
kinetics allows for an assessment not only of muscle
activation but also the exact moment at which this
occurs during the gait cycle.
EMG Docking Station: Wireless electromyographic
probe docking station. Fitted with internal battery to
allow for charging even without an external power
supply
EMG handheld Unit: Wireless palmtop computer with
touchscreen display. Receives the signal from the
electromyographic probes and transmits it to the
workstation. Allows for the configuration of settings
and display of signals near the patient or within 50
metres of the patient.
33
Workstation: Super multiprocessor computer with 24
parallel processing units. Receives, integrates,
synchronises, and re-processes all signals from the
devices connected. An internal master clock ensures
synchronism even during very long acquisitions,
thereby obtaining a perfect correlation, moment by
moment, of all signals.
Monitors: Two 24” Full HD screens for the
simultaneous display of all kinematic, kinetic and
electromyographic data, with picture in picture
reproduction of the video shots from the various
different angles.
Software
- 2D/3D/6DOF data tracking
- Marker Data/High-Speed Video Capture
- Real-Time Streaming
- Automatic Marker Identification
- Portable/Laptop Connection
- Supports Passive and Active Markers
- Batch Processing
- Supports the cameras ordered previously
- Easy to synchronize with an external time base
- Export to C3D, TSV format, or directly to Matlab
- Facility Licensed - no dongle
- No hub or workstation is needed
- Single cable from cameras to computer.
- Protocols validated by the international scientific
community
- Allows for the simultaneous, objective, full analysis
of neuromuscular and biomechanical parameters of
patient movement such as Gait Deviation Index.
34
Mandatory Accessories
-A wand with 3 markers used to test the calibration
dynamically
B5
Electro diagnostic device
B6
Internal Muscular testing system
- A calibration frame.
- Marker Starting Kit
- A Laser device to mark the end of capture (with
connection to the workstation).
- Pelvimeter
-Modular and multi configurable walkway for
platforms positioning
- Accelerometer
- 4 step stairs that can be integrated on the force
platforms and recognised by the software.
Electrodiagnostic device for the Strength/Duration
curve, by unipolar and bipolar technique; rectangular,
triangular-exponential and faradic currents. Adjustable
intensity pedal. LCD display for S/D curve seeing;
automatic calculation of rheobase, chronaxie, and
accommodation ratio, best time of electro stimulation.
Mandatory accessories : Printer connection in addition
to printer, trolley, packages of electrodes .
Test system which allows detecting and amplifying the
internal muscular biological processes that occur during
both dynamic and isometric muscular work. The system
consists of : an electronic processing Unit, PC software
synchronizing: sensor for measuring dynamic force,
speed and power, 8 active EMG electrodes, strain
gauge, biofeedback-lamp, conductance contact-mat.
35
Unit
1
Unit
1
B7
Set of isotonic machine
B8
Isokinetic Evaluation Machine
B9
Computerized Spirometer
Set of mechanical isotonic machines for all joints with
external load resistance composed of: Leg extension (
180X103X165 cm, weight 205kg), rowing ergometer,
seated leg curl( 180X103X165 cm, weight 180 kg) , leg
press ( 252X104X198 cm, weight 229 kg), shoulder
machine, back machine( 120X95X165 cm, weight 160
kg) , abduction/adduction leg ( 187X157X105, weight
130 kg), chest press ( 198X180X110 cm, weight 225
kg) ; Large foot plate and large back rest and seat base.
Apparatus for Isokinetic evaluation of knee, shoulder,
wrist, ankle, hip, back. Adjustable chair that allows the
access of 360 degrees at the dynamometer. Operational
modes: isokinetic, eccentric, passive, isotonic,
isometric and in closed kinetic chain. Maximum speed
reachable in phase of exercise has to be at least 450
degrees/second and maximum force at least 600 Nm.
The operator able to manage either through a computer
or in manual mode. Mandatory Accessories: operative
system Windows, software, monitor . Dimensions 6
m2
Computerized spirometer (on a moving trolley),
completely modular for execution and analysis of the
results derived from the basic spirometric tests like
flow/volume and volume/time curve, slow vital
capacity and maximum voluntary ventilation, partial
flow/volume curve, residual functional capacity (FRC).
It works through the method of washout of the nitrogen,
capillary alveolar diffusion through the two methods of
single breath and intra-breath without apnea time, with
internal printer. Mandatory consumables and
accessories: Disposable paper adult size mouth piece
with external diameter 30 mm (100 piece). Nose clips
(pack of 5) , thermal printer papers ( pack of 100 rolls)
36
Unit
1
Unit
1
Unit
1
B 10
Portable spirometer
Pc
1
Breathing Trainer
Portable spirometer for display of numerical reading of
: FVC - FEV1 - PEF - FER
Breathing trainer with air load of 1200 cc/s
B 11
Pc
15
B 12
Electrical Timer
Electrical rechargeable timers with large LCD display
Pc
3
B 13
Electrical Bed
Pc
4
B 14
One section treatment table
Pc
1
B 15
Electric treatment table for children
Pc
1
B 16
Manipulation bed
Pc
1
B 17
Traction Bed
Bed with electric regulation of the height. four wheels
and two folds pieces with adjustable head part 0-45
degree, cushioned mattress and washable cover.
Dimensions 1X2 m. Loading weight 300 kg, Lift from
min height ( 48 cm) to max height( 90 cm) in 30 second
by foot switch.
One-section treatment table, covered by fireproof
material, steel frame painted with episodic dusts, 4
turning wheels. Dim.: 200x200 and adjustable height
min 48 cm and max 90 cm.
Padded board with washable vinyl covering. The tilt
angle can be adjusted from 0° to 90° by means of an
electric motor with pneumatic control. Heightadjustment by means of an electric motor with
pneumatic pedal control .high from 50 cm to 100 cm
controlled by a pedal, inclination from 0° to
90°controlled by a panel. Inclination and high
adjustable footrest. Dimensions 171X165 cm.
6 sections bed for manipulations with separate
regulation of the legs, electric regulation of the height
approximately from 50 to 100 cm, arms and legs
sections independently adjustable with a hydraulic
system. Retractable wheels.
Bed for active lumbar traction. Main requests:
electromechanical movements; push-button panel;
pelvic harness; neck pillow. Dimensions: 259X60X70
Pc
1
37
cm.
B 18
Portable lifting device
B 19
Biofeedback-EMG portable Unit
B 20
Vibrating Platform
B 21
Vibration handled device for upper limbs
B 22
Message rolls and balls
B 23
Parallel bar
B 24
Fixed mirrors
Portable lifting device with electrically adjustable base,
electric supply with extractable 24 Volt battery
separately rechargeable, max load kg.160, electric
emergency descent, mechanical emergency descent,
anti crushing device, full harness.
Completely automatic operation, acoustic and visual
Feedback, analogical or binary Feedback. Two courses
of 50 and 500µV RMS, 100-1000 Hz passing band,
adjustable threshold. Rechargeable long life batteries.
Interface to the Personal computer, software for
analysis of the acquired segments and for printing.
Mandatory accessories: disposable surface EMG
electrodes diameter 35 mm (100 packs), Pre gelled
disposable EMG sensors ( 10 packs), and thin coating
5% saline base conductive gel.
Vibrating Platform for propioceptive musculotendineous and joint training and the improvement of
muscle strength, power output and muscle flexibility.
Dimensions: 64.8X50X24 cm. Weight capacity 136
Kg.
Portable vibration handled device for upper limbs
complete with different adaptors, and vibration
frequency from 20 to 55 Hz.
Rolls for massage 15cm diameter, and balls for
massage 20cm diameter.
Steel construction, height adjustable from 70 to 100 cm,
bases with floor plates & attachment pieces . no cross
braces between bars one of them 5 m long, the second
between 3.5 to 4 m .
Rectangular mirror. Dimensions: cm. 100x170 (width x
38
Pc
1
Unit
2
Unit
2
Unit
1
Ball/ roll
5 balls/5 rolls
Pc
1
Pc
3
B 25
Portable mirrors
B 26
Scales with slider
B 27
Stairs
B 28
Four Wheeled Walker
B 29
Forearm Walker
B 30
Two Wheels Walker
B 31
Articulated walker device
height)
Rectangular mirror with modular trolley. Dimensions
Cm. 100x170 (width x height)
Scales with slider. Maximum load: 150 kg, division:
100 g; bioelectrical impedance analysis
Stairs with Painted steel structure with chrome sliding
parts. Height-adjustable thermoplastic handrails. Two
ramps of different-size steps covered with washable
laminate. It can be easily disassembled in the straight or
corner version. Long ramp cm 163x70h. Short ramp
cm. 90x70h. platform cm. 70x70h, not less than 30 cm
width.
Folded Removable Walker from chrome steel tube,
with 4 wheels, and height adjusted. Overall depth 60
cm, depth folded 17.5 cm, overall width 68 cm, width
inside base legs 55 cm, width inside hand grips 48 cm.
Weight capacity 180 kg. And breaks
Pc
2
Pc
3
Pc
1
Pc
3
Folded Removable Walker from chrome steel tube,
with adjustable height axillary support from 115 to
144cm, overall width 74 cm, overall depth 57 cm, and
4 wheels. Max user weight 160 kg .
Pc
2
Folded Walker from chrome steel tube , with handle
height: 70-95cm. with Two wheels. Max weight 180
kg.
Articulated walking device, from chrome steel tubing,
with handles and adjustable height, without wheels.
Max weight 180 kg.
Pc
2
Pc
2
39
B 32
Crutches
B 33
Cushion
B 34
B 35
Vinyl balls
Dumbbells
B 36
B 37
Clock
Movable stool
B 38
Computerized Cycloergometer
B 39
Wood rocking board
B 40
Orthopaedic ladder
B 41
Low level scanning laser therapy
Light weight elbow crutches of different shapes and
dimensions. Weight capacity 180 Kgs. Approximat user
height : Tall adult 5'10" - 6'6", Adult 5' - 6' 2", Youth 4'
2" - 5'2". Cuff to handle adjustment Adult 9.5" - 11" ,
Youth 8.5" -10". Cuff diameter 3". Light weight
axillary crutches Heights : 4'6" - 5' 2"/ 5' 2" - 5' 10" / 5'
10' -6' 6".
Pediatric cushions of different shape and dimension,
covered with washable leatherette
Vinyl balls from .25, .5 , 1, 2, 3, 4, 5 kg.
Set of plastic dumbbells from 0.5 kg. to kg. 5
Wall clock
Rolling hydrolic stool adjustable in height. With mid
thoracic support. Synthetic Leather material. 160-180
kg max load.
Computerized Cycloergometer, can be used for both
upper and lower extremities, with different settings:
constant load, constant pulsation, constant couple.
Endowed with operational control panel and a display
LCD, on which the following parameters are illustrated:
time, heart rate, speed, distance, power and Kcal/min.
With ability to perform Astrand tests.
Painted-wood rocking board (cm. 50x40x7h) able to
train in mono and multi directions.
Wooden orthopaedic ladder with central board and
metal frame for graduation. Dim. cm. 50 w x 300 h.
Scanning Laser therapy, diode GaAs (ca 905nm): 1pulsed type, Laser probe with peak power 80W,
maximum duration of impulse 200ns. 2- Laser probe
830nm, continuous type, power 40mW. Calculation of
real emitted power.
40
Pc
3 axillary, 3
elbow
Pc
10
Pc
set
Pc
Pc
1 of each weight
1 set with 2
dumbbells of
each weight
20
20
Pc
3
Pc
5
Pc
1
Pc
1
B 42
Computerized equipment for physiotherapy
hyperthermia
B 43
Portable electrical stimulation Unit
B 44
Ice making Unit
B 45
Air Cryotherapy Unit
B 46
Vacuum therapy Unit
Computerized
equipment
for
physiotherapy
hyperthermia with temperature control system ,
supplied by MW generator, frequency 433 MHz,
power from 1 to 100 Watt. Applicator for all treatment
anatomic volume by water bolus applied to all surfaces.
Software program for treatment management and
storage into the database. size : 580 X 650 X1650 mm.
Max weight 150 kg.
Portable electrical stimulation Unit with 4 independent
channels for muscle stimulation by asymmetrical
biphasic pulsed current, and symmetrical biphasic
pulsed current. Phase duration of asymmetrical biphasic
pulsed current: 10-200 µs. Phase duration of
symmetrical biphasic pulsed current: 10-1000 µs. Pulse
frequency: 1 – 200 Hz. Frequency modulation: 0 – 180
Hz. Amplitude: 0 – 140 . Main voltage: 170 V max
Ice making Unit with cooling air, reservoir ability 15
Kg., maximum production of ice 27 Kg. in the 24
hours. Ice produced in different sizes. Water reservoir
capacity : 5 L. Dimensions: 36X44X45 cm. Mandatory
accessories: Reusable fabric ice bag to be used with ice
cubes, crushed ice or cold water. Pleated design allows
bag to conform closely to body contours. (20 pack)
Air Cryotherapy Unit, with maximum temperature –
33°C. Dimensions: 504 X 546X1091 cm. Length of
tube 170cm.
Vacuum therapy Unit that allows the application of a
total body pneumatic system, with a wide and precise
regulation of the suction strength (continuous or
pulsated).
41
Unit
1
Unit
1
Unit
1
Unit
1
Unit
1
B 47
Combined electrotherapy and ultrasounds
Unit
B 48
Mobile Unit for hot packs
B 49
Continuous passive motion machine for upper
extremity
B 50
Stainless steel portable whirlpool
B 51
Quadriceps set table
Combined electrotherapy and ultrasounds Unit with
trolley. Two independent electrotherapy channels for
the emission of the following forms of currents:
interferential, alternate medium frequency current,
pulsated asymmetrical biphasic current, pulsated
symmetrical biphasic current, rectangular impulses
current, alternate rectangular impulses current,
rectangular impulses mono-phases current, triangular
impulses mono-phases current , 2 - 5 Trabert current,
faradic current with modulated width, galvanic current,
continuous interrupted FM current, dia-dynamic
current. Muscular stimulation. Module for the section
of the ultrasounds complete of multi-frequency head (1
and 3 MHz). High voltage. Micro current. Cart
included. dimensions 60 L X 50 W cm
Mobile Unit for hot packs of different sizes and shapes.
Thermostatically
adjustable
temperature,
the
temperature of water is constant around 70°C.
Dimensions: 82.5X50X39 cm
Continuous passive motion machines (for upper limb)
with remote control, able to provide all movement
directions, adjustable speed, adjustable angle of motion,
pre-load and range of motion, timer, and electrical
supply.
Stainless steel portable whirlpool for treatment of the
extremities and joints with hydro massage, adjustable in
height. Power supply 230 V 50 Hz. Dimensions: 60 (L)
X 35 (L) X 39 (W) cm. Capacity 15 galon.
Unit
1
Pc
1
Pc
1
Pc
2
Quadriceps table to practice in sitting or reclined
position, possibility of adjusting the seat and backrest,
with stainless part and leather seat and foam padded
backrest. Dimensions 70X80X135 cm. Weight plates 1
kg ( 4 pc) , 0.5 kg ( 4 pc).
Pc
2
42
B 52
Unweighing treadmill
B 53
High intensity laser therapy
A lightweight, portable; wheeled base that is width- and
height-adjustable and accommodate a wide range of
patients from Pediatric up to 200 cm tall, pneumatic
and electrical unweighing system designed to control
weight bearing, posture and balance over a treadmill
and ground. Max weight capacity: 180 Kg. Can be
used for partial weight bearing or lifting patients from a
wheelchair. The casters lock automatically. Controlled
with an electronic keypad. On-board compressor and
battery to run the Unit for up to 10 hours between
charges. Including a small and large vest.
Specifications: Width where patient stands 60–110 cm,
Capacity 180 kg, Unweighing Capacity 150 kg.
Height 150 – 200 cm, and width 70–120System.
Mandatory accessory: Treadmill: For rehab, medical
and sports conditioning therapy. Standard features : a
handheld remote stop-start switch, 100 micro-amp
hospital isolation leakage transformer and extended
parallel medical handrails. Specifications: Dimensions
of the running surface compatible with the suspension
system, Speed 0.03 to 7.75 m/s Incline0%–20%
and load 250 kg.
High intensity laser therapy, pulsed. Peak Power: 3kW.
Energy per pulse (max) 350 mJ. Average Power: 10.5
W. Pulse Duration<120 ms. LCD with a touch
interface. Software Programs to modify and save
parameters. Emitted energy calculated automatically
according to selected functions. Alarms and safety
features, emergency stop button for laser emission;
Dimensions and weight: 30 x 70 x 78 cm; 40 kg; hand
piece for regenerative therapy Standard hand-piece for
pain therapy
43
Pc
1
Pc
1
B 54
Curtain tracks
B 55
Foot/Step Stool
B 56
Portable muscle tone assessment device
B 57
Capacitive and resistive therapy
The tracks formed by import steel sheet; one-pieceforming, top quality baked enamel finish, on the inside
and outside of rod sections, prevents corrosion. Multilayered anti-rust and anti-dirt treatment, high strength,
color-shining and durable; A hybrid structure of
dynamics and aesthetics in safety, awarded with
multinational patents. Drapery Master Carrier with
Offset Arm on tracks to enhance shading and airtight
effects. Special double wheels designed HDPE carriers
to roll freely inside the track channel. ; Nylon cords that
allow transferring offset arm from two-way to singleway. ; ·
A single, double or triple combination
supported by a range of strong brackets for easy
installation. ; Control: Hand, Cord, Hand ; Colors:
White, Brown ; Length: 6 meters
(Double Steps): Top made of Molded Washable
Plastic.; Freight saving knock-down construction; Size:
Double Step 40L x 28W x 20/40H cm.
Unit
50
Pc
9
An electronic device to measure the muscle tone.
Weight app. 450 grams, with microprocessor and
display screen visualization of the results, and Dual
measurement mode, Triple (three consecutive
measurements) . Mandatory Accessories: PC software
for data storing and analysis, MS SQL database.
Capacitive and resistive therapy based on the physical
principle of the condenser, around 0.50 MHz
Radiofrequency.
Capacitive Electrodes, Resistive
Electrodes in different sizes and neutral electrod. Soft
contact safety system, Color Display. Remote Control.
Capacitive power around 450 VA, resistive power
around 200 W. Mandatory Accessories
Pc
2
Pc
2
44
B 58
Pediatrics size Gait trainer
B 59
Computerized Treadmill
B 60
Cross Trainer Machine
Gait trainer for child to stand and walk, Frame
manufactured from steel tubes, powder coated, with 4
wheels and provide support for chest through
abdominal cushion, and arm harness, with head support
and padded arm rest, lifting assist, ankle prompts, and
Seat harness. Adjustable for age range 1 year - 8 years.
Size: Medium to large.
computerized treadmill with possibility to choose
different settings: load, speed and inclination. With
operational control panel and a display LCD on which
the following parameters are illustrated: time, heart
rate, speed, distance, power and Kcal/min.
Cross Trainer Machine with adjustable load and
electronic display
for time, speed, distance and RPM.
45
Pc
1
Pc
4
Pc
1