▌ 5 Axes: XYZ translation, Z rotation, sample tilt ▌ 6 Axes: XYZ translation, polar and azimuthal rotation, and sample tilt www.omnivac.de ▌ Cooling < 7K (5 axes), <9 K (6 axes) ▌ low He consumption < 0.5 l/h @ 12 K ▌short cooling time < 2h from RT to 15 K HPM Cryo 5/6 Axes Cryo‐Manipulator HPM Cryo ‐ heating/cooling head ► Temperature < 7K/9K ► 5/6 Axes ► low He consumption ► low outgassing ► easy access to the sample ► software integration for SPECS and VG Scienta energy analyzer ► compatibility to standard sample holder systems ► full motorization HPM Cryo – cooling/heating LakeShore, 331 S The HPM Cryo manipulator series provides access to the temperature range below 10 K, e.g. for low temperature angle resolved photoemission experiments (ARPES). Due to its efficient shielding solution, only low He consumption of < 1 l/h is needed to reach guaranteed temperatures of 7K. Optional Janis ST‐402 cryostat allows for temperatures below 5K (guaranteed) and below 3K (achieved). Basing on the OmniVac HPM manipulator series, the HPM Cryo manipulator offers +/‐ 12,5 mm X/Y‐stroke and up to 1000 mm Z‐ stroke. Use of a differentially pumped rotary feedthrough allows for full 360° z‐rotation. Additionally, azimuth sample rotation of +/‐ 180° or/and sample tilt of ‐5° to +45° can be integrated. HPM Cryo – cooling/heating He – cooling He – consumption Indirect resistive Heating < 7K (5 axes), < 9K (6 axes) 0.5 l/h at > 12K, 1 l/h at lowest temperature < 500K HPM Cryo – linear manipulation Design Stroke (full square range) Resolution Repeatability Max. speed DN 160CF flange mounted XY‐motion module +/‐ 12,5 mm XY (+/‐ 25 mm optionally), 500 mm Z 5 µm (manual) 0.5 µm (motorized) 5 µm (manual) 1 µm (motorized) 2 mm/sec HPM Cryo – rotational manipulation Polar rotation (R1 axis) Azimuth rotation (R2 axis) Sample tilt (R3 axis) Angular resolution full 360° +/‐ 180° ‐5° ‐ +45° < 0.1° Included Items: • LakeShore 331 S, Cryogenic Temperature Controller • Janis Research ST‐400 UHV Cryostat • Option: Janis Research ST‐402 UHV Cryostat for ultra‐low‐ temperature manipulator ( < 5K in continuous mode, 3K for limited time) OmniVac Espensteigstrasse 16 D‐67661 Kaiserslautern / Germany Tel +49 (0) 631 3110740 Fax +49 (0) 631 28056 [email protected]