5. Sample preparation Sampling 477 Grinding

5. Sample preparation
Contents
Sampling
477
Samplers, Solids 477 + Samplers, Liquids 481
Grinding
487
Jaw breaker 487 + Mills 487 + Mortars 508
Sieving
510
Sieve shakers 510 + Test sieves 514 + Sample divider 520
Mixing, Homogenisation
Dispersers 522 + Ultrasonic homogenizers 532 + Homogenisers 541
476
522
5. Sample preparation
www.haeberle-lab.de
Sampling/Samplers, Solids
1 Pigment Lance
1
For pigments and pastes and agglomerating bulk goods.
Bürkle
- With half-open flute 50% for slightly adhesive products
- With one-quarter-open flute 25% for less adhesive products
Capacity
ml
145
85
312
179
480
273
Flute
opening
25%
50%
25%
50%
25%
50%
Length
Dia.
PK
Cat. No.
mm
300
300
600
600
900
900
mm
30
30
30
30
30
30
1
1
1
1
1
1
9.303 710
9.303 711
9.303 712
9.303 713
9.303 714
9.303 715
NEW!
2 Disposable Samplers DispoSampler
In numerous situations, rapid and contamination-free samples have to be taken.
DispoSamplers are perfect for this application. They are individually packed and always
ready to use. Avoid expensive decontamination or cleaning of soiled samplers.
Gamma sterilised versions are also available.
LiquiDispo
For liquids with low viscosity up to 10000cP.
MicroDispo
For semi-solid goods up to 0.5mm diameter.
ViscoDispo
For high viscous media up to 100000cP.
PowderDispo
Disposable sampler for taking a cross sectional sample from within a bulk powder.
Type
LiquiDispo
LiquiDispo
MicroDispo
ViscoDispo
ViscoDispo
PowderDispo
Length
cm
500
1000
500
500
1000
620
Capacity
ml
100
190
10
100
190
100
2
Bürkle
Material
PK
Cat. No.
PE-HD
PE-HD
PE-HD
PE-HD
PE-HD
PE-HD
20
20
20
20
20
20
9.303 720
9.303 722
9.303 728
9.303 732
9.303 734
9.303 736
Jars - please see page 23
E & OE.
477
5. Sample preparation
www.haeberle-lab.de
Sampling/Samplers, Solids
NEW!
1 2 Zone samplers, Multi/All-layer/Jumbo, steel V4A or aluminium
1
For sampling bulk goods of all types. Available in various different lengths and materials:
Bürkle
Multi-sampler:
With several closed chambers for multi-target samples from several preset sample depths. Available in stainless steel
V4A/PTFE, stainless steel V4A/V4A or Aluminium. Tube diameter: 25mm.
All-layer-sampler:
With open chambers for cross-sectional sampling through all layers of the sample. Emptied via the open tube end of the
collector. Available in stainless steel V4A or aluminium. Tube diameter: 25mm.
Jumbo-sampler:
Generally as the All-layer-sampler with open tube end. Tube diameter is 50mm making the sampler very good for
coarser granule samples and large sample volumes. Available in stainless steel V4A or aluminium.
2
Easy emptying with the emptying device.
Type
Material
Multi-Sampler
Multi-Sampler
Multi-Sampler
Multi-Sampler
Multi-Sampler
Multi-Sampler
Cross-section sampler
Cross-section sampler
Cross-section sampler
Cross-section sampler
Cross-section sampler
Cross-section sampler
Jumbo sampler
Jumbo sampler
Jumbo sampler
Jumbo sampler
Jumbo sampler
Jumbo sampler
V4A/PTFE
V4A/PTFE
V4A/PTFE
V4A/V4A
V4A/V4A
V4A/V4A
Anodized aluminium
Anodized aluminium
Anodized aluminium
V4A/V4A
V4A/V4A
V4A/V4A
Anodized aluminium
Anodized aluminium
Anodized aluminium
Anodized aluminium
V4A/V4A
V4A/V4A
3
Length
Imm.
depth
No. of
chambers
mm
550
850
1500
550
850
1500
550
850
1500
550
850
1500
850
850
1500
2500
1500
2500
mm
430
710
1355
430
710
1355
430
710
1355
430
710
1355
710
710
1355
2355
1355
2355
3
3
5
3
3
5
3
3
5
3
3
5
3
3
5
7
5
7
Capacity
PK
Cat. No.
ml
14
17
17
14
17
17
70
130
260
70
130
260
390
880
1700
2900
650
910
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.303 860
9.303 862
9.303 864
7.631 201
7.653 124
9.303 866
9.303 875
9.303 876
9.303 877
6.232 190
6.234 598
9.303 865
6.240 956
9.303 878
9.303 879
9.303 883
7.625 884
6.236 850
PK
Cat. No.
1
1
1
9.303 880
9.303 884
9.303 885
3 Zone sampler, accessory cleaning brush, PVC/stainless steel
For basic cleaning of Zone samplers.
Length
mm
600
1000
1000
4
Dia.
mm
25
25
50
4 Emptying device, stainless steel
Emptying zone samplers were often a matter of patience and a steady hand. Now its
Bürkle
easier and faster with Bürkles emptying device. just lay the zone sampler onto the
stainless steel stand, adjust the funnels along the sample chambers, and, after turning the sampler, the media will
directly flow into the containers below. Quality materials ensure that the sampler is autoclavable.
Description
Emptying device
478
E & OE.
PK
Cat. No.
1
6.236 050
5. Sample preparation
www.haeberle-lab.de
Sampling/Samplers, Solids
NEW!
1 Sampler QuickPicker, Stainless steel V4A or PP
Suitable for removing bulk materials from sacks or large bags and depositing directly into
sample bottles. Simple to use and clean. Crevice-free to prevent sample residues causing
cross-contamination which could affect subsequent sample results.
Complete with cleaning brush and two 250ml sample bottles.
Material
Length
Imm.
depth
mm
300
300
mm
500
500
PP
V4A
1
Bürkle
Capacity
PK
Cat. No.
ml
75
75
1
1
6.205 458
9.303 850
2 Sample bottles for QuickPicker Sampler
2
Bürkle
Type
Capacity
ml
250
250
PE-LD, transparent
PP, transparent
PK
Cat. No.
1
1
9.303 854
9.001 062
3 Sampler Tubus, AISI 316 stainless steel, according to ISTA
3
Sampler for free flowing, bulk goods up to approx. 1cm diameter. This makes it possible,
Bürkle
for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks.
Operation: Insert Tubus into a sack to the desired sampling depth, while keeping the collection tube closed using your
hand. When you take away your hand, the sample flows directly through the open tube into the container or sampling
bag beneath it.
-
choice of 2 lengths, 40cm and 80cm
also for coarse-grained bulk goods
AISI 316 stainless steel
corresponds to ISTA standard for seed lengths of 10mm and 20mm
Type
Tubus
Tubus
Length
mm
400
800
Dia.
mm
40
40
PK
Cat. No.
1
1
6.200 394
6.204 492
4 Sampler Milk Powder, AISI 316 stainless steel, conforms to standards of DIN and
IDF
Milk powder collector made of AISI 316 stainless steel, sterilisable. Developed especially
for milk powder samples, conforms to standards of DIN and IDF (Int. Dairy Federation).
The collector is inserted into bags or casks and the sample is removed using a semi-circular profile lance.
Type
Length
Milky
mm
480
Imm.
depth
mm
385
Bürkle
Capacity
PK
Cat. No.
ml
150
1
6.051 629
NEW!
5 Spatula SteriPlast, PS, sterile
White spatula for powder, granules, pastes. With fixed handle, ideal for taking samples
from sacks, containers or the manufacturing process. The rigid tip allows caked surfaces
to be penetrated.
Sterilised, single packed.
Length
mm
228
Imm.
depth
mm
152
5
Bürkle
Capacity
PK
Cat. No.
ml
36
10
6.059 018
E & OE.
4
479
5. Sample preparation
www.haeberle-lab.de
Sampling/Samplers, Solids
1
2
1 2 Sampling scoops and spoons, PS, sterile
White. For disposable use. Individually packed.
Bel-Art Products
Type
PK
Cat. No.
1
1
1
1
1
1
1
9.150 461
9.150 462
9.150 463
9.150 639
9.150 640
9.150 641
9.150 642
Scoop
Scoop
Scoop
Spoon
Spoon
Spoon
Spoon
Capacity
ml
60
125
250
1,23
2,46
4,93
14,79
Other sampling devices are available on request.
3
NEW!
3 Sample bags SteriBag, PE, sterile
Sterile, PE, liquid sample bags. For samples from chemistry, pharmaceutical, medical,
food technology applications etc.
Bürkle
Type A: Without write-on panel
Type B: With write-on panel.
Type
A
B
A
B
A
B
A
B
A
B
A
B
4
Capacity
ml
60
60
180
180
540
540
720
720
810
810
1650
1650
Width
mm
76
76
76
76
114
114
140
140
114
114
178
178
Length
mm
127
127
178
178
229
229
229
229
305
305
305
305
PK
Cat. No.
500
500
500
500
500
500
500
500
500
500
250
250
9.404 114
9.404 119
9.404 115
9.404 120
9.404 116
9.404 121
9.404 117
9.404 122
9.404 118
9.404 123
6.223 094
6.223 093
NEW!
4 5 6 Control seals for sampling close-it®
Printed or plain. close-it® is an aluminium backed, vapour-proof adhesive label with
Bürkle
extremely strong adhesion. Sacks, boxes etc. which have been pierced with samplers can
be hermetically resealed. Can even adhere to slightly moist or dusty sacks coated with fine powders, e.g. plaster, flour
etc.
close-itfood
The strength of the adhesive is almost as powerful as that of the original, the million-times proven close-it from Bürkle,
and also ensures the necessary success when resealing sample openings, as it reliably prevents products from escaping
after sampling. The adhesive complies with the European guidelines for foodstuffs. Just like the original, close-it food
has a barrier layer of aluminum foil. This means that close-it food is suitable for sampling foodstuffs, pharmaceuticals,
cosmetics, food additives - in short, for all applications in which the product must not be contaminated by contact with
the adhesive.
5
6
480
Type
Colour
Description
Printed
Printed
Printed
Printed
Printed
Plain
Roller
Printed
Printed
Printed
Printed
Printed
Plain
Roller
Plain
Printed
Plain
Printed
close-it tape
close-it tape
close-it tape food
close-it tape food
red
green
yellow
blue
black
white
Standard 95 x 95mm
Standard 95 x 95mm
Standard 95 x 95mm
Standard 95 x 95mm
Standard 95 x 95mm
Standard 95 x 95mm
95 x 95mm
Maxi 150 x 150mm
Maxi 150 x 150mm
Maxi 150 x 150mm
Maxi 150 x 150mm
Maxi 150 x 150mm
Maxi 150 x 150mm
150 x 150mm
Food 95 x 95mm
Food 95 x 95mm
Food 150 x 150 mm
Food 150 x 150 mm
Roll 95mm
Roll 150mm
Roll 95mm
Roll 150mm
red
green
yellow
blue
black
white
white
red
white
white
E & OE.
PK
Cat. No.
500
500
500
500
500
500
1
250
250
250
250
250
250
1
500
500
250
250
1
1
1
1
9.303 910
9.303 911
9.303 912
9.303 913
9.303 914
9.303 915
9.303 919
9.303 980
9.303 981
9.303 982
9.303 983
9.303 984
9.303 985
9.303 989
9.303 986
6.228 255
9.303 990
9.303 991
9.303 992
9.303 993
9.303 994
9.303 995
5. Sample preparation
www.haeberle-lab.de
Sampling/Samplers, Solids-Samplers, Liquids
NEW!
1 Anti-tamper seal seal-it, self-adhesive, roll
1
If a container opening is closed with seal-it, then the container cannot be opened
Bürkle
without destroying the seal-it label. seal-it is additionally provided with several
cross-perforations which immediately tear when manipulated like a motorcar tax disc. seal-it can be used to securely
seal bottles, sample bags, sacks, specimen bags, envelopes, etc. The white labelling field on seal-it can be written on
with all conventional writing tools with, for example, contents information, sampling date, name of operator, etc.
- Clear identification via numbers in sequence
- Integrated control label with the same number, for accompanying documents
- Format 178mm long, 30mm wide
- Tear-off perforation for each label
Type
PK
Cat. No.
seal-it
500
7.622 477
NEW!
2 3 Sampler Silo drill, aluminium or stainless steel
Designed for sampling powders, granulates or semi-solids from silos and vehicle tankers.
Bürkle
When bulk goods are transported over a long distance (e.g. by HGV) the material can
separate out, so if a sample is then taken only from the surface the result may not be representative. With the Silo drill
a sample can be drawn from deeper levels. The Silo driil is screwed manually into the material and only opened once at
the required sample depth. Depths of up to 2.5m can be reached by using extension rods. The Silo drill is not only
suitable for silos, but also but can also be used in numerous bulk goods containers in the pharmaceutical, chemical,
foodstuffs and semi-luxury goods sectors.
Spiral diameter: 90mm, chamber: diameter 40mm, capacity 400ml.
Type
Silo drill, aluminium
Silo drill, V4A
Extension rods
Length
mm
1500
1500
1000
PK
Cat. No.
1
1
1
9.303 858
9.303 868
9.303 859
2
3
Wide mouth bottles please see page 46.
4 Liquid sampler MiniSampler, PE
4
Taking samples is quick, easy, clean and practical.
Bürkle
With the MiniSampler, the sample liquid only comes into contact with the suction hose
and the sample bottle. Cross contamination is largely prevented. Bottles can be tightly sealed immediately after the
sample is taken with a tamper-evident cap.
The single use, PE suction hose can be quickly replaced, ensuring that samples are never contaminated. A new hose
can be used for each sample if required. Because of its small diameter (8mm) and flexibility the hose can reach
sampling areas that are otherwise inaccessible.
Accessories:
Supplied with ten 100ml PE bottles, 10m of PE suction hose (6 x 8mm), 1 hose cutter , 1 stainless steel hose weight
and 20 seal-it safety seal labels in a carrying case.
Type
MiniSampler
E & OE.
PK
Cat. No.
1
9.303 970
481
5. Sample preparation
www.haeberle-lab.de
Sampling/Samplers, Liquids
1
NEW!
1 Sampler ProfiSampler, aluminium
Vacuum-operated sample collector for sampling liquids in drums, tanks, road tankers,
railway wagons, ships, lakes, ground water.
- can be supplied with optimized, straight suction tube for simpler sampling.
- transport case for tidy transport and disposal
- filling level control, automatic return flow and overfill protection by built-in venting valve.
- optimized draw volume: 200ml, suction pressure 0.5 bar and suction depth down to 4m of water.
- always check the chemical resistance of parts coming into contact with the sample.
wear protective clothing!
Bürkle
ProfiSampler Aluminium
Comprises: aluminium vacuum pump, with feet, venting valve and GL45 bottle thread, 1 x 500ml glass bottle,
5 x 220mm long, conductive, black PA suction tubes, 1 tubing cutter, 1 hose weight made of grade 304 stainless steel,
24 sample labels, 24 seal-it bottle seals, earthing cable.
2
Type
PK
Cat. No.
ProfiSampler Aluminium
PA suction tubes, black, 220cm length, pack of 10 pieces
1
10
6.225 622
6.226 207
2 Sampler Uni-Sampler "Ex", for sampling class A1 flammable liquids
Specially developed for sampling class A1 flammable liquids (e.g. benzene, petrol). Glass
bottles and tubing electrically connected and grounded via an earthing cable. The "Ex"
sampler was developed in cooperation with Gütegemeinschaft Tankschutz e.V.
Bürkle
Operation:
1. Earth the Uni-Sampler. 2. Lower the suction hose to the desired depth. 3. Attach the adapter to the sample bottle.
4. Generate vacuum with the hand pump and collect sample. 5. Remove the filled sample bottle, seal and label.
- PTB approval D-333-009 618/00
- Comprises 4m of sample tubing, glass sample bottle, manual vacuum pump and earthing cable in carry case
Type
Uni-Sampler "Ex"
3
PK
Cat. No.
1
9.303 831
3 Chemistry dippers, PP, with rod handle
Suitable for aggressive liquids. With beaker and PP rod handle.
Capacity
ml
250
600
1000
Length*
1000
1000
1000
Stem
dia.
mm
20
20
20
Bürkle
PK
Cat. No.
1
1
1
9.303 840
9.303 842
9.303 844
* Stem
NEW!
Sampling system TeleScoop
TeleScoop is a versatile sampling system with exchangeable tools for a wide range of
Bürkle
applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel
beaker and dip net) are attached to the rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts,
open water courses etc. Sampling depths down to 6m can be reached with the adjustable telescopic aluminum rod.
Catch net for taking solid and organic samples from water courses.
4
4 Telescopic rods TeleScoop, aluminium
Aluminium, with red plastic fittings. New corrugated construction prevents the bars
rotating during retrieval of a sample. With screw clamps and end-stops to prevent the
sections sliding apart.
Length
m
0,65 - 1,20
0,95 - 2,80
1,25 - 2,50
1,15 - 3,00
1,65 - 4,50
1,75 - 6,00
482
E & OE.
Bürkle
PK
Cat. No.
1
1
1
1
1
1
9.303 800
9.303 801
9.303 802
9.303 804
9.303 806
9.303 807
5. Sample preparation
www.haeberle-lab.de
Sampling/Samplers, Liquids
1 Industrial dip samplers, sample beakers, angled for TeleScoop
1
With individually variable angle adjustment.
Capacity
ml
500
1000
2000
Bürkle
Material
PP
PP
PP
PK
Cat. No.
1
1
1
9.303 810
9.303 812
9.303 814
2 Pendulum beaker for TeleScoop, PP
2
For industrial dip samplers. Automatically swings into a vertical position. Ideal for narrow
shafts.
Capacity
ml
500
1000
2000
Material
PP
PP
PP
Bürkle
PK
Cat. No.
1
1
1
9.303 820
9.303 822
9.303 824
3 Bottle holder for TeleScoop, PP/PA
3
For industrial dip samplers. Holds bottles up to max. 88mm diameter. Suitable for plastic
and glass bottles. With universal quick-action clamping strap.
Type
Bottle holder
Bürkle
PK
Cat. No.
1
9.303 830
4 Dip sampler for TeleScoop, stainless steel
4
For pasty or powdery materials
Bürkle
- with lip for scraping
- sterilisable
Capacity
ml
1000
E & OE.
PK
Cat. No.
1
9.303 846
483
5. Sample preparation
www.haeberle-lab.de
Sampling/Samplers, Liquids
1
1 behrotest® water samplers
For sampling from the water surface.
Behr
Adjustable clamping device and end rod made of stainless steel, with choice of sample
container as indicated. For sampling in accordance with DIN 38409 to H14/AOX a 1 litre borosilicate beaker is required.
With 3-part handle, which is continuously adjustable between 1 and 3.75 m. Ideal for use at sites which are difficult to
access.
2
Type
Description
PB 1000
PF 1000
PP 1000
PT 1000
PV 1000
With boro. glass beaker
With dispensing bottle
With PP beaker
With PTFE beaker
With stainless steel beaker
PK
Cat. No.
1
1
1
1
1
9.920 630
9.920 631
9.920 632
9.920 633
9.920 634
NEW!
2 3 Catch nets for TeleScoop
Ideal for sampling from basins, tanks, shafts, open waters etc. The telescopic aluminium
rods TeleScoop allow sampling up to 6m depth.
- For industries and water treatment
- Mesh width: 2mm up to 5mm
- Depth catch, net depth: 250mm
Type
Material
Surface
catch net
Depth
catch net
PVC / PA
Dimensions
(W x D)
mm
310 x 280
PP / PA
190 x 430
Bürkle
PK
Cat. No.
1
9.303 828
1
9.303 829
3
4
4 Sampler Vampire
For field sampling of liquids.
Portable, peristaltic tubing pump for all liquids. Ideal for sampling from drums, tanks,
wells, water separators, sewage installations and treatment plants.
- Simple cleaning, liquids pumped only come into contact with tubing
- With rechargeable battery and charger
- Sample taken directly into specific sample bottle
- Maximum depth that samples can be withdrawn: 5m
- Also suitable for contaminated or particle-laden liquids
- Good chemical resistance
- High flow rate up to 2.0L/min.
Bürkle
Supplied with bottle basket, driving unit, battery charger, peristaltic pump and 5m of PE suction tubing.
Type
Vampire sampler, complete
Extension tubing, PE, 5m
Wide-mouth sampling bottle, 250ml
Wide-mouth sampling bottle, 500ml
Bottle holder for 500ml bottle
484
E & OE.
PK
Cat. No.
1
5
1
1
1
9.303 851
9.303 839
9.303 854
9.303 855
9.303 845
5. Sample preparation
www.haeberle-lab.de
Sampling/Samplers, Liquids
1 Sampler LiquiSampler, PTFE/FEP or PP
1
DIN 53242. For liquids. Choice of construction. PTFE/FEP for contamination-free
Bürkle
sampling, or transparent PP. Practical push button, single-handed operation. Suitable for
point, cross-sectional, and bottom sampling. Ideal for sampling from open and closed drums, kegs, tanks, silos, water
sources (ponds, lakes, streams, rivers). Suitable for all commercial kegs and drums with openings of at least 25mm
diameter. All surfaces are non-porous and crevice-free preventing accumulation of dirt. Only round-profile screwthreads,
suitable for food hygiene applications, are used. Simple to dismantle and clean.
Material
Length
mm
1000
2000
1000
2000
PTFE/FEP
PTFE/FEP
PP, transparent
PP, transparent
Dia.
mm
25
25
25
25
PK
Cat. No.
1
1
1
1
9.303 950
9.303 951
9.303 955
9.303 956
2 Sampler ViscoSampler, PTFE/FEP or PP
2
Ultra-pure sampler with powerful suction for viscous substances.
Bürkle
Choice of construction. PTFE/FEP or PP.
Specially designed for viscous substances, such as lime water, slurries, wet clay and soil samples, sediment, oils,
emulsions and creams.
The filter flask sucks up and discharges the material. All surfaces are non-porous and crevice-free, preventing dirt
accumulation. Only round-profile threads, suitable for food hygiene applications, are used. Allow easy dismantling and
cleaning.
Material
PTFE/FEP
PTFE/FEP
PP
PP
Length
mm
1000
2000
1000
2000
Dia.
mm
25
25
25
25
E & OE.
PK
Cat. No.
1
1
1
1
9.303 960
9.303 961
9.303 965
9.303 966
485
5. Sample preparation
www.haeberle-lab.de
Sampling/Samplers, Liquids
1
Liquid samplers, vessels and bottles
2
According to DIN 51750 pt. 2
9.303 935
3
9.303 937
4
9.303 939
9.303 938
5
Dipping Vessel
For sampling liquids from tanks, lorry tankers, etc. Made for Ex-use or stainless steel V2A. 1L capacity, 75mm diameter,
400mm high. Without lowering cable.
Operation: Lower vessel into liquid. Bottom and cap valves open automatically. Liquid flows through the vessel. The
valves close at the target depth, and the desired sample can be collected.
Dipping bottle EX
For sampling flammable liquids.
For sampling group A mineral oil products, VbF Hazard Classes AI and AII. Made from brass that do not produce sparks,
75mm diameter, 385mm high, weight 3kg. Without lowering cable.
Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens.
3. Sample flows in. 4. Pull up dipping bottle and remove sample.
Use an electrically conductive, manually operated reel and lowering cable or chain.
Dipping bottle
For sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000ml
capacity, 125mm diameter, 330mm high, weight 3.1kg. Without lowering cable.
Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in.
4. Pull bottle back up and remove sample.
6
7.623 934
Bürkle
9.303 933
Immersion Cylinders
For target spot and bottom samples of mineral oil products. Made of nickel-plated brass.Heavy, robust design (4.1kg).
Without lowering and pull cables
Target spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The
separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion
cylinder.
Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the
valve automatically when the bottom is reached and the sample then enters the immersion cylinder.
Target immersion cylinder
With the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is
lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents
the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw
thread. Weight 1.5kg. With 5m venting tube. Upper body unscrews for easy cleaning.
Mini immersion cylinder
For sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels
with narrow openings. Capacity 50ml, 30mm diameter, height 180mm, weight 280g. Without lowering cable. Upper
body unscrews for easy cleaning.
Type
PK
Dipping vessel, nickel-plated brass
Dipping vessel, stainless steel V2A
Dipping bottle (Ex)
Dipping bottle
Immersion bomb
Target immersion cylinder
Mini immersion cylinder
7
Cat. No.
1
1
1
1
1
1
1
9.303 935
9.303 936
9.303 937
9.303 938
9.303 939
7.623 934
9.303 933
1
2
3
4
5
6
7 Accessories for liquid samplers, vessels and bottles
Bürkle
Description
Manual cable reel, PP green, without cable
Manual cable reel, black PP, electrically conductive, without cable
Manual cable reel Ex, black with grounding cable, without cable
Cable, V2A steel conductive
AISI 304 stainless steel lowering cable/PTFE-coated, length 10m
486
E & OE.
PK
Cat. No.
1
1
1
1
1
6.200 263
9.303 941
6.234 815
9.303 943
6.087 044
5. Sample preparation
www.haeberle-lab.de
Grinding/Jaw breaker-Mills
1 Jaw Crusher, BB 51
1
Benchtop model Jaw Crusher for the rapid and gentle, coarse and preliminary size
reduction of hard, brittle and ductile materials. Continuous digital gap width adjustment
with scale, enhanced ultimate fineness.
Retsch
Features:
- Feed size up to 35mm (feed opening 40mm)
- Throughput/charge: single items, charges to 1000ml
- Dimensions: 360mm x 580mm x 510mm (WxDxH)
- Weight approx. 80kg
- Supply requirements: 230V, 50Hz
Type
Material
BB 51
BB 51
BB 51
BB 51
Stainless steel
Tungsten carbide
Zirconium oxide
Manganese steel
PK
Cat. No.
1
1
1
1
9.739 075
9.739 076
9.739 077
9.739 078
2 Jaw Crushers, BB 100, BB 200, BB 300
2
For rapid and gentle coarse grinding and crushing of hard, brittle and tough materials.
Retsch
Continuous gap adjustment with scale and zero-point adjustment for wear
compensation. Excellent performance with enhanced ultimate fineness, robust construction, fitted with quick-release
hopper, receiver with safety switch and casing. Standard model is supplied with manganese steel breaking jaws. Models
with jaws made of stainless steel or tungsten carbide are available, details on request.
Features:
- high throughput
- continuous gap width adjustment
- braking motor with safety switch
- ultimate fineness approx. 1 to 40mm
- easy cleaning of grinding chamber
- Supply requirements 400 V 3-ph, 50 Hz
Type
BB 100
BB 200
BB 300
Feed size
up to
mm
50
90
130
Dimensions
(W x D x H)
mm
320 x 800 x 960
450 x 900 x 1160
670 x 1450 x 1600
Weight
PK
Cat. No.
kg
137
300
700
1
1
1
9.739 098
9.519 120
9.739 093
3 Ultra Centrifugal Mill ZM 200
3
Extremely rapid and gentle size reduction of soft to medium-hard and fibrous materials.
Ideal for grinding, e.g., chemicals, food and feeds, washing powder, plastics, fertilizers,
pharmaceutical raw materials and finished products. Also suitable for cryogenic grinding.
Retsch
Features:
- Gentle on the material thanks to 2-step rotor/screen system
- New Powerdrive ensures higher performance with increased torque, even with temporary overloads
- Wide speed range, adjustable from 6000rpm to 18000rpm
- Patented cassette system for maximum sample recovery and easy cleaning
- Defined final fineness due to ring sieves sieves with aperture sizes from 0.08mm to 10mm
- For sample volumes from a few mls to 4.5L
- Comfortable safety housing with automatic cover closure
- Feed size up to 10mm
- Ultimate fineness to approx. 40µm
- Throughput/charge up to 900/4500ml (with cyclone)
- Dimensions (W x H x D) 410mm x 365mm x 515mm
- Weight: approx. 38kg
- Supply requirements 230V, 50/60Hz approx. 1300 W
Supplied with: ZM 200 with 900ml cassette. Please order rotor and ring screens separately. Alternative rotors and ring
sieves (e.g. for heavy metal-free grinding) are available on request.
Type
ZM 200
E & OE.
PK
Cat. No.
1
9.738 970
487
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1
1 Accessories for Ultra Centrifugal Mill ZM 200
Retsch
Description
Rotor, stainless steel, 6 teeth
Rotor, stainless steel, 12 teeth
Rotor, stainless steel, 24 teeth
Ring screen, trapezoid holes 0.08mm
Ring screen, trapezoid holes 0.12mm
Ring screen, trapezoid holes 0.20mm
Ring screen, trapezoid holes 0.25mm
Ring screen, trapezoid holes 0.50mm
Ring screen, trapezoid holes 0.75mm
Ring screen, trapezoid holes 1.00mm
Ring screen, trapezoid holes 1.50mm
Ring screen, trapezoid holes 2.00mm
Ring screen, round holes 3.00mm
Ring screen, round holes 4.00mm
Ring screen, round holes 5.00mm
Ring screen, round holes 6.00mm
Cyclone, with passage container and holder, with 5L collector
Cyclone, with passage container and holder, with 3L collector
Replacement grinding set for the grinding of very small quantities of material,
8 tooth push-fit rotor, labyrinth disk and 50m
Feeder kit, DR 100, drive unit for 220-240V, 50Hz,
with feed attachment, with 40mm push-fit feed chute, funnel and stand
2
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.739 064
9.739 065
9.739 066
9.738 972
9.738 973
9.738 974
9.738 975
9.738 976
9.738 977
9.738 978
9.738 979
9.738 980
9.738 981
9.738 982
9.738 983
9.738 984
9.738 985
9.738 986
9.738 987
1
9.738 971
2 Rotor Beater Mills SR 200/SR 300
For batch and continuous coarse, fine and ultra-fine grinding, as well as for the
Retsch
deagglomeration of dry, soft, medium-hard, organic and inorganic materials. The SR
300 achieves a larger throughput with higher product fineness due to the higher rotor speed and drive capacity than the
SR 200. Grinding and sieve inserts are easily interchangeable.
Specifications:
- Feed size up to 15mm
- Ultimate fineness: < 0.08mm
- Supply requirements: 400V, 50Hz 3-ph.
Items supplied: Mill with rotor and 5L stainless steel receiver including, filter tubing. SR 300 is also available with base
frame. Sieves for sieve frames and grinding assemblies are available on request.
Type
SR 200 for 400 V 50 Hz 3-ph., grey cast iron
SR 300 for 400 V 50 Hz 3-ph., stainless steel
PK
Cat. No.
1
1
9.739 081
9.738 905
Accessories for Rotor Beater Mills SR 200/SR 300
Retsch
Type
Base frame 360°, stainless steel
Ring sieve, Conidur holes 0.25mm
Ring sieve, Conidur holes 0.50mm
Ring sieve, Conidur holes 0.75mm
Ring sieve, Conidur holes 1.00mm
488
E & OE.
PK
Cat. No.
1
1
1
1
1
9.738 909
9.738 914
9.738 915
9.738 916
9.738 917
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1 Cross Beater Mill SK 100
1
For simple, rapid grinding of medium-hard and brittle materials, with batchwise or
continuous operation. Versatile use due to large selection of accessories. Central locking
device and motor brake ensure excellent operating safety.
Retsch
Specifications:
- Feed size: up to 15mm
- Ultimate fineness: approx. 0.1mm
- External dimensions (WxDxH): 560 x 700 x 1150mm (inc. base stand)
- Weight approx.: 54kg
- Supply requirements: 400V, 50Hz 3-ph.
Supplied with: cross beater mill with cross beater, impact plates, filter tubing for 5L receiver. Receiver and underframe,
please order separately. Alternative power supply versions are available, details on request. Accessory base frame kit
also available, details on request.
Type
SK 100, hardened steel
SK 100, cast iron
SK 100, stainless steel
PK
Cat. No.
1
1
1
9.739 020
9.739 021
9.739 022
Accessories for Cross Beater Mill SK 100
Retsch
Type
Aperture
size
mm
0.12
0.50
1.00
2.00
5.00
10.00
Base for SK 100
Base screen, trapezoid holes
Base screen, trapezoid holes
Base screen, trapezoid holes
Base screen, trapezoid holes
Base screen, trapezoid holes
Base screen, trapezoid holes
PK
Cat. No.
1
1
1
1
1
1
1
9.738 811
9.738 671
9.738 912
9.738 660
9.738 662
9.738 665
9.738 670
NEW!
2 Cutting Mill SM 100/200/300
2
Rapid and gentle size reduction of bulky, soft, medium-hard, fibrous, elastic and
Retsch
thermally sensitive materials. The most powerful model, the SM 300, is especially
suitable for cutting heterogeneous mixtures such as household waste, plastic materials, computer and electronic scrap.
The mills are also used for organic materials like wood, roots, bones, plants and feed pellets. They can be equipped with
various rotors and hoppers. The SM 300 features a variable speed which makes it perfectly adaptable to the particular
application requirements.
Features:
- powerful size reduction thanks to 3kW drive with high torque and RES technology (SM 300)
- perfect adaptation to application requirements by variable speed from 700rpm to 3000rpm (SM 300)
- optimum cutting effects thanks to double acting cutting bars (SM 200, SM 300)
- quick and easy cleaning without tools due to fold-back housing with smooth surfaces and push-fit rotor and sieves
(SM 200, SM 300)
- defined final fineness due to bottom sieves with aperture sizes from 0.25mm to 20mm
- wide range of accessories including various hoppers, collection systems, rotors and sieves
Supplied with:
SM 100 with 5L collecting receptacle. Please order rotor, hopper and bottom sieve and base frame (option) separately.
SM 200/SM 300 with 5L collecting receptacle, base frame. Please order rotor, hopper and bottom sieve separately.
Specifications
Feed size:
Final fineness:
Retractable hopper:
Push-fit rotor:
Speed at 50 Hz:
SM 100/200/300
up to 60 x 80mm
0.25 to 20mm
-/yes/yes
yes/ yes/yes
1500rpm
(SM 300) variable 700 to 3000rpm
1.5/2.2/3kW
3/N~ 400V, 50Hz
(SM 300) 220-230V, 50/60Hz
Drive power:
Mains connection:
Type
SM 100
SM 200
SM 300
Dimensions
(W x D x H)
mm
582 x 700 x 1675
576 x 760 x 1675
795 x 765 x 1691
Weight
PK
Cat. No.
kg
73
90
160
1
1
1
9.739 069
9.739 067
9.739 083
Further voltages and versions for heavy-metal free grinding on request.
E & OE.
489
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1
NEW!
1 Rotors and Receptacles SM 100/200/300
Retsch
Description
6-disc rotor stainless steel, with reversible cutting tips
Parallel section rotor stainless steel
Collecting receptacle, 30L plastic, incl. adapter and filter hose
Collecting unit 250/500ml incl. 2 sample bottles
PK
Cat. No.
1
1
1
1
9.739 074
7.900 427
9.739 607
9.739 608
NEW!
Hoppers for Cutting Mill SM 100
Retsch
Description
Base frame with wheels
Standard funnel for cutting mill
Long stock hopper
2
PK
Cat. No.
1
1
1
7.900 426
7.900 428
9.739 070
NEW!
2 Hoppers for Cutting Mill SM 200/300
Retsch
Description
Universal hopper with plastic plunger
Long stock hopper with wooden plunger
PK
Cat. No.
1
1
9.739 071
9.739 072
NEW!
Cyclone-suction-combination for cutting mill SM 200/300
Retsch
Description
Cyclone-suction-combination incl. vacuum cleaner 230V/50Hz, 500ml sample bottle
Holder for use of sample bottles 1L / 2L / 5L
Sample bottle 1L
Sample bottle 2L
Sample bottle 5L
3
PK
Cat. No.
1
1
1
1
1
9.739 602
9.739 603
9.739 604
9.739 605
9.739 606
3 Bottom sieves for cutting mill SM 100/200/300
Retsch
Description
Conidur holes
Conidur holes
Conidur holes
Conidur holes
Conidur holes
Conidur holes
Square holes
Square holes
Square holes
Square holes
Square holes
490
Aperture
size
mm
0.25
0.50
0.75
1.00
1.50
2.00
4.00
6.00
8.00
10.00
20.00
E & OE.
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
9.738 854
9.738 855
9.738 856
9.738 857
9.738 858
9.738 859
9.738 815
9.738 816
9.738 817
9.738 818
9.739 055
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
NEW!
1 Knife Mills GRINDOMIX GM 200/GM 300
1
The Knife Mills Grindomix GM 200 and GM 300 are suitable for the rapid and
Retsch
reproducible size reduction and homogenisation of food and feed materials. They can
process substances with a high water, oil or fat content just as quickly and reliably as dry, soft and medium-hard
products.
Features:
- Very fast and reproducible grinding and homogenisation of foodstuffs
- Speed-controlled industrial motor
- Autoclaveable grinding tools
- For sample volumes up to 4.5L (GM 300)
- Digital display of grinding time and speed
- Interval operation possible
- Gravity lid for automatic adjustment of grinding chamber volume
- 10 parameter combinations can be stored (GM 300)
- Electrical supply data: different voltages, Power connection: 1-phase
Supplied with:
GM 200 complete with 1L plastic container, lid and stainless steel knife.
GM 300 complete with 5L plastic container, standard lid, standard knife and scraper.
Type
GM 200
GM 300
Feed
size
up to
mm
40
~ 130
Maximum
Throughput/
Charge
700 ml
4500 ml
Dimensions
(W x D x H)
mm
350 x 392 x 275
440 x 440 x 340
Weight
PK
Cat. No.
kg
10.0
30.0
1
1
9.739 252
9.738 500
NEW!
Accessories for Knife Mill GM 200
Retsch
Description
Grinding container 1 litre plastic, autoclavable
Grinding container of PP, 1L
Grinding container of glass, 1L
Grinding container of stainless steel, 1L
Standard lid of PP for grinding container of autoclavable plastic, PP, glass or steel
PP standard lid 1L for glass, steel and plastic containers
Reduction lid of PP for volume reduction to 0.5L for grinding container of autoclavable plastic or PP
Gravity lid PP for grinding container of autoclavable plastic and PP
Gravity lid of PP with overflow channels for grinding container of autoclavable plastic and PP
Gravity lid of PP for grinding container of glass or steel
Gravity lid of PP with overflow channels for grinding container of glass or steel
Scraper
Knife of stainless steel
Knife of pure titanium for heavy-metal free grinding
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.738 510
9.739 213
9.739 208
9.739 248
7.930 430
9.739 214
9.739 222
9.739 210
9.739 218
9.739 211
9.739 209
9.739 212
9.739 215
9.739 059
NEW!
Accessories for Knife Mill GM 300
Retsch
Description
Cutting container of plastic, transparent, autoclavable and scratch-resistant, 5L, including knife holder
Cutting container of plastic, transparent, autoclavable and scratch-resistant, 5L, without knife holder
Cutting container of stainless steel, autoclavable, 5L, including knife holder
Cutting container of stainless steel, autoclavable, 5L, without knife holder
Standard lid of plastic, transparent, autoclavable and scratch-resistant
Gravity lid of plastic, autoclavable and scratch-resistant
Gravity lid of plastic, with overflow channels, autoclavable and scratch-resistant
Standard knife made of stainless steel, autoclavable
Scraper
E & OE.
PK
Cat. No.
1
1
1
1
1
1
1
1
1
9.738 501
9.738 502
9.738 503
9.738 504
9.738 505
9.738 506
9.738 507
9.738 508
9.738 509
491
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1
1 Disc Mill DM 200
The DM 200 disc mills are mainly used for preliminary and fine grinding of medium-hard
and hard-brittle substances in batches.
Grinding discs are available in 4 different materials.
Retsch
Specifications:
- feed size: up to 20mm
- ultimate fineness: up to 0.1mm
- throughput: up to 150 kg/hr.
- dimensions (WxDxH): 440 x 400 x 870mm
- weight: approx. 140kg
- supply requirement: 400V, 50/60Hz 3ph.
Supplied with: disc mill DM 200 without grinding assembly.
Please order grinding assembly separately.
Type
DM 200
PK
Cat. No.
1
9.739 030
PK
Cat. No.
1
1
1
1
9.739 031
9.739 032
9.739 033
9.739 034
Accessories for Disc Mill DM 200
Retsch
Type
Grinding assembly - hardened steel
Grinding assembly - manganese steel
Grinding assembly - tungsten carbide
Grinding assembly - zirconium oxide
2
2 Mortar Grinder RM 200
Suitable for dry and wet grinding of soft, brittle, hard and paste-like samples. Depending
Retsch
on the sample, amounts from approx. 10ml up to 190ml can be reduced in size,triturated and
homogenised. With beech wood scraper (special accessory) for pharmaceutical and homeopathic applications. The RM
200 is exceptionally easy to operate and clean. With digital time control and performance display, scale for reproducible
pestle setting, built-in automatic switch-off and rapid motor-stop.
Please order mortar and pestle separately.
Specifications
Feed size*:
Batch size/Feed volume:
Ultimate fineness*:
Dimensions (WxDxH):
Weight: approx:
Supply requirements:
*depending on feed material
max. 8mm
10 to 190ml
approx. 10µm
400 x 370 x 480mm
approx. 24 kg (without grinding set)
220 - 240V 50Hz
Type
RM 200
PK
Cat. No.
1
9.738 170
Accessories for Mortar Grinder RM 200
Retsch
Description
Mortar, hard porcelain
Mortar, agate
Pestle, hard porcelain
Pestle, agate
Mortars and pestles made from zirconium oxide, sintered corundum, steel and tungsten carbide are available on request.
492
E & OE.
PK
Cat. No.
1
1
1
1
9.738 151
9.738 172
9.738 173
9.738 174
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1 Mixer Mills MM 200/400
1
The mixer mills are true laboratory "all-rounders". They have been developed specially for
Retsch
grinding, homogenising and mixing of small amounts of sample in only a few seconds.
They are also perfectly suitable for the disruption of biological cells as well as for DNA/RNA recovery. The MM 400 can
also be used for cryogenic and wet grinding.
Features:
- 2 milling stations
- Digital setting of time and vibration intensity
- 9 separate programmes can be stored
- Wide selection of grinding jar sizes and materials
- Self-locking and self-centering, clamping device for grinding jars (MM 400)
- Screw-top grinding jars up to 50ml, especially suitable for wet and cryogenic grinding (MM 400)
Accessories for cryogenic grinding available on request.
Grinding jars and balls please order separately.
Specifications
Feed size*
MM 200:
MM 400:
Ultimate fineness*
MM 200:
MM 400:
Charge
MM 200:
MM 400:
Digital preselection of vibrational frequency
MM 200:
MM 400:
Power supply:
*depending on feed material
Type
MM 200
MM 400
Dimensions
(W x D x H)
mm
371 x 461 x 266
371 x 461 x 266
up to 6mm
up to 8mm
< 10µm
< 5µm
max. 2 x 10ml
max. 2 x 20ml
3 to 25Hz (180 to 1500rpm.)
3 to 30Hz (180 to 1500rpm.)
100 - 240V 50/60Hz
Weight
PK
Cat. No.
kg
25.00
26.00
1
1
9.739 080
9.739 091
2 Mixer Mill CryoMill
2
The CryoMill is designed for the cryogenic size reduction of materials which cannot be
Retsch
ground at room temperature or whose composition would be changed by it. The grinding
jar is cooled before and during the grinding process with liquid nitrogen through an integrated cooling system. Thus the
sample is embrittled and its volatile components are preserved. The size reduction principle is the same as that of the
well-proven Mixer Mill MM 400. The CryoMill can also be operated without the cooling system which makes it suitable for
a wide range of applications.
Features:
- fast, efficient cryogenic grinding and homogenization at -196°C
- perfect for preparation of temperature-sensitive samples and plastics
- safe and convenient thanks to an integrated cooling system with Autofill
- programmable cooling cycles, digital parameter setting
- easy to operate and clean
- 1 grinding station
Specifications
Feed size
Ultimate fineness
Charge
Adjustable frequency range
Size (W x H x D)
Weight
Power supply:
up to 8mm
< 5µm
max. 1 x 20ml
3 to 25Hz (180 to 1500rpm.)
385 x 370 x 570mm
46kg
100 - 240V, 50/60Hz
Type
CryoMill
PK
Cat. No.
1
9.739 280
Please order Autofill, grinding jars and grinding balls separately.
E & OE.
493
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1
1 Grinding Jars for Mixer Mill MM 200
Retsch
Material
Stainless steel 1.5ml
Stainless steel 5ml
Stainless steel 10ml
Stainless steel 25ml
Agate 5ml
Agate 10ml
Capacity
ml
1.5
5.0
10.0
25.0
5.0
10.0
PK
Cat. No.
1
1
1
1
1
1
9.738 823
9.738 829
9.738 835
9.738 839
9.738 827
9.738 833
Grinding jars made of hardened steel, tungsten carbide, zirconium oxide and PE-HD are available on request.
2
2 Grinding Jars for Mixer Mill MM 400
With screw cap.
Retsch
Advantages:
- simple and safe handling
- dust and air-tight
- Suitable for wet and cryogenic grinding
Material
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Agate
Agate
Zirconium oxide
Zirconium oxide
Zirconium oxide
Tungsten carbide
Tungsten carbide
hardened steel
PTFE
Capacity
ml
1.5
5.0
10.0
25.0
35.0
50.0
5.0
10.0
10.0
25.0
35.0
10.0
25.0
25.0
25.0
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.738 848
9.738 849
9.738 960
9.738 964
9.738 875
9.738 885
9.738 852
9.738 961
9.738 962
9.738 965
9.738 880
9.738 963
9.738 864
9.738 869
9.738 874
NEW!
Grinding Jars for CryoMill
Retsch
Material
Capacity
ml
5
25
35
50
5
25
35
50
25
Stainless steel (to be used with adapter)
Stainless steel
Stainless steel
Stainless steel
Hardened steel (to be used with adapter)
Hardened steel
Hardened steel
Hardened steel
PTFE
3
PK
Cat. No.
1
1
1
1
1
1
1
1
1
9.739 281
9.739 282
9.739 283
9.739 284
9.739 287
9.739 288
9.739 289
9.739 290
9.739 291
NEW!
3 Accessories for Mixer Mill, CryoMill
Retsch
Type
Autofill with LN2 container, 10L
Autofill with LN2 container, 50L
Adapter for use of
2/4 grinding jars, 5ml stainless steel
Adapter for use of
2/4 reaction tubes, 2.0ml
Reaction tubes, 2.0ml
494
E & OE.
PK
Cat. No.
1
1
1
9.739 285
9.739 292
9.739 286
1
9.739 297
1000
9.739 298
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
Ball charge table for grinding jars MM 200/MM 400/CryoMill
Grinding jars
Capacity
ml
1.5
5.0
10.0
25.0
35.0
50.0
ml
0.2 - 0.5
0.5 - 2.0
2-4
4 - 10
6 - 15
8 - 20
Feed
size
up to
mm
1
2
4
6
6
8
Ball
dia.
Bulbs
mm
5
7
10 / 12
10 / 12 / 15
10 / 12 / 15 / 20
10 / 12 / 15 / 20 / 25
1-2
1-2
1-2 / 1-2
5-6 / 2-4 / 1-2
6-9 / 4-6 / 2-3 / 1
12-14 / 6-8 / 3-4 / 1 / 1
Grinding balls for Mixer Mill MM 200/MM 400/CryoMill
Retsch
Material
Dia.
mm
12
15
20
25
15
5
7
10
12
15
20
25
10
12
15
15
20
5
7
9
12
Zirconium oxide
Zirconium oxide
Zirconium oxide
Zirconium oxide
Hardened steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Tungsten carbide
Tungsten carbide
Tungsten carbide
PTFE with steel core
PTFE with steel core
Agate
Agate
Agate
Agate
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.738 846
9.738 405
9.738 847
9.738 401
9.738 407
9.738 870
9.738 871
9.738 872
9.738 873
9.738 408
9.738 387
9.738 403
9.738 878
9.738 879
9.738 414
9.738 420
9.738 888
9.738 860
9.738 861
9.738 862
9.738 863
1 Planetary Ball Mills PM 100/100 CM/200/400
1
Planetary Ball Mills are suitable for mixing and grinding soft, medium-hard, extremely
Retsch
hard, brittle and fibrous materials. They are used whenever high degrees of fineness down to
the submicron range are to be achieved in a very short time. In addition to dry and wet grinding, they are also suitable
for colloidal grinding and mechanical alloying. Typical materials are minerals, ores, chemicals, ceramics, soils, household
and industrial waste etc.
Features:
- extremely high ultimate fineness down to submicron range
- 1, 2 or 4 grinding stations
- grinding jar volumes from 12ml to 500ml
- suitable for long-term trials and continuous use
- programmable starting time
- power failure back-up ensures storage of remaining grinding time
- reproducible results due to digital parameter setting
- 10 parameter combinations can be stored
- single button operation with graphic display
- automatic grinding chamber ventilation for cooling the grinding jars
- grinding jars in 7 sizes and 6 different materials available
Supplied with: Planetary Ball Mill only. Grinding jars and grinding balls have to be ordered separately.
The PM100 CM is a Planetary Ball Mill with a speed ratio of 1:-1. Size reduction is not so much achieved by impact but
by pressure and friction which is more gentle on the material.
Specifications
Ultimate fineness:
Dimensions (WxDxH):
PM 400
Supply requirements:
Type
PM 100
PM 100 CM
PM 200
PM 400
< 1µm
630 x 468 x 415mm
836 x 780 x 1220mm
230V, 50-60Hz
Grinding
stations
1
1
2
4
Grinding jars
ml
12 to 500
12 to 500
12 to 125
12 to 500 ml
Please order grinding jars and grinding balls separately.
Feed
size
up to
mm
up to 10
up to 10
up to 4
up to 10
Maximum
Throughput/
Charge
up to 220 ml
up to 220 ml
up to 2 x 50 ml
up to 8 x 20 ml
E & OE.
Weight
PK
Cat. No.
kg
80.00
80.00
72.00
285.00
1
1
1
1
9.739 270
9.739 275
9.739 271
9.739 274
495
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1
1 Grinding Jars for Planetary Ball Mills PM 100/100 CM/200/400
Retsch
Material
Capacity
ml
50
125
250
500
50
125
250
500
50
125
250
50
125
250
500
50
125
250
500
50
125
250
500
Hardened steel
Hardened steel
Hardened steell*
Hardened steel*
Stainless steel
Stainless steel
Stainless steel*
Stainless steel*
Tungsten carbide
Tungsten carbide
Tungsten carbide*
Agate
Agate
Agate*
Agate*
Sintered aluminium oxide
Sintered aluminium oxide
Sintered aluminium oxide*
Sintered aluminium oxide*
Zirconium oxide
Zirconium oxide
Zirconium oxide*
Zirconium oxide*
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.738 320
9.738 339
9.738 216
9.738 222
9.738 321
9.738 340
9.738 217
9.738 223
9.738 311
9.738 338
9.738 218
9.738 328
9.738 345
9.738 219
9.738 224
9.738 327
9.738 344
9.738 220
9.738 226
9.738 325
9.738 342
9.738 221
9.738 227
*not suitable for PM 200.
Further grinding jars on request
Ball charge table for grinding jars PM 100/100 CM/200/400
2
Grinding jars
Capacity
ml
50.0
80.0
125.0
250.0
500.0
ml
5 - 20
10 - 35
15 - 50
25 - 120
75 - 220
Feed
size
up to
mm
3
4
6
10
10
Ball
dia.
mm
5 / 10 / 15 / 20
5 / 10 / 15 / 20
5 / 10 / 15 / 20
5 / 10 / 15 / 20 / 30
5 / 10 / 15 / 20 / 30 /40
Bulbs
200 / 10 / 7 / 3
250 / 25 / 10 / 5
500 / 30 / 18 / 7
1200 / 50 / 45 / 15 / 6
2000 / 100 / 70 / 25 / 8 / 4
2 Grinding Balls for PM 100/100 CM/200/400
Retsch
Material
Dia.
mm
10
20
30
40
10
20
30
40
10
20
30
40
10
20
30
40
2
3
10
20
30
40
2
3
10
20
30
40
Agate
Agate
Agate
Agate
Sintered aluminium oxide
Sintered aluminium oxide
Sintered aluminium oxide
Sintered aluminium oxide
Hardened steel
Hardened steel
Hardened steel
Hardened steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel 0.5 kg
Stainless steel 0.5 kg
Zirconium oxide
Zirconium oxide
Zirconium oxide
Zirconium oxide
Zirconium oxide, 0.5 kg
Zirconium oxide, 0.5 kg
Tungsten carbide
Tungsten carbide
Tungsten carbide
Tungsten carbide
496
E & OE.
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.738 383
9.738 388
9.738 393
9.738 398
9.738 380
9.738 385
9.738 390
9.738 395
9.738 381
9.738 386
9.738 391
9.738 396
9.738 382
9.738 387
9.738 392
9.738 397
9.738 425
9.738 426
9.738 419
9.738 847
9.738 417
9.738 418
9.738 427
9.738 428
9.738 384
9.738 389
9.738 394
9.738 399
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1 Jaw crushers PULVERISETTE 1 (2 Models)
1
Ideal for fast and effective pre-crushing of hard and very hard brittle materials in the
areas of mining and metallurgy, chemistry, geology and mineralogy, glass industry,
ceramics industry, rocks and soils. The final fineness can be easily set from the outside (10 different stages are
possible).
Fritsch
Equipment Model I/II:
With crushing jaws and lateral support walls made of tempered steel.
Crushers are also available in other voltages and with crushing jaws and lateral support walls made of stainless steel,
chromium-free steel, hardmetal tungsten carbide, zirconium oxide and manganese steel.
Model I/Model II
approx. 60mm/approx. 95mm
up to 140kg/h/up to 200kg/h
1 to 15mm/1 to 15mm
400V/3~, 50-60Hz/400V/3~, 50-60Hz
400 x 800 x 800mm/400 x 800 x 800mm
177kg/205kg
Max. feed size:
Throughput:
Gap widths (final fineness):
Supply requirements:
Dimensions (WxDxH):
Net weight:
Type
Rating
W
1450
2780
Jaw Crusher PULVERISETTE 1 model I
Jaw Crusher PULVERISETTE 1 model II
PK
Cat. No.
1
1
9.519 213
9.519 223
2 Disk mill PULVERISETTE 13
2
Ideal for intermittent and continuous fine grinding of hard-brittle and medium-hard solids in
the areas of mining and metallurgy, glass industry, ceramics industry, soil research, rocks and
soils.
Max. feed size:
Throughput:
Final fineness:
Supply requirements:
Dimensions (WxDxH):
Net weight:
Fritsch
20mm
up to 150kg/h
0.1 to 12mm
400V/3~, 50-60Hz, 1830W
440 x 870 x 40mm
140kg
Type
Disk mill PULVERISETTE 13
PK
Cat. No.
1
9.739 001
PK
Cat. No.
1
1
1
1
9.739 002
9.739 003
9.739 006
9.739 007
Instrument also available in other voltages.
Fixed and movable grinding disks must be ordered additionally.
Accessories for disk mill PULVERISETTE 13
Fritsch
Type
Description
Fixed grinding disk
Mobile grinding disk
Fixed grinding disk
Mobile grinding disk
hardened steel cast
hardened steel cast
zirconium oxide
zirconium oxide
Grinding disks are also in manganese steel and hardmetal tungsten carbide available.
We can supply this
manufactorer’s
whole
product range !
E & OE.
497
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1
1 Mortar grinder PULVERISETTE 2
Ideal for universal fine grinding of hard-brittle to soft samples, dry or in suspension, as
Fritsch
well as for preparing and homogenising pastes and creams on a laboratory scale. The
PULVERISETTE 2 is an essential instrument in the chemical/pharmaceutical as well as in food processing laboratories.
The Mortar grinder is easy to clean ensures reproducible and precise grinding results, due to precise adjustment and
pestle pressure readout. Also working with liquid nitrogen for cooling/embrittlement is no problem.
Max. feed size:
Max. sample quantity:
Final fineness:
Supply requirements:
Dimensions (WxDxH):
Net weight:
8mm
30 to 150ml
10 to 20µm
100-120/200-240V/1~, 50-60Hz, 250W
310 x 460 x 410mm
24kg
Type
Mortar Grinder PULVERISETTE 2
PK
Cat. No.
1
9.738 200
PK
Cat. No.
1
1
1
9.738 211
9.738 235
9.738 240
Mortar and pestle must be ordered additionally.
Accessories for mortar grinder PULVERISETTE 2
Fritsch
Material
Agate
Stainless steel
Hard porcelain
Mortars and pestles are also available in sintered corundum, hardmetal tungsten carbide and zirconium oxide.
2
2 Planetary ball mills PULVERISETTE 5/6 classic line
Ideal for fast, loss-free fine grinding of hard, medium-hard, brittle and fibrous materials,
Fritsch
dry or in suspension. Sample can be processed from a few milligrams to several kilograms at
a wide range of fineness levels down to less than 1µm. They are especially easy to operate and fast and easy to clean.
They are suitable for continuous, heavy duty usage and guarantee safe clamping of the grinding bowls. Matching
grinding parts of 8 different materials are available to provide maximum protection against undesired contamination. In
addition to size-reduction, Planetary Ball Mills can also be used for mixing and homogenising of emulsions and pastes or
for mechanical alloying and activation. Example areas: geology and mineralogy, sample preparation for analysis,
ceramics, chemistry, biology, pharmaceuticals, metallurgy and much more.
Features:
- Extremely high rotational speeds of the main disk for particularly high final finenesses
- Very fast, uniform and reproducible size reduction
- Loss-free grinding also in suspensions, due to a seal ring in the grinding bowl
- Reproducible grinding results due to controlled drive and programmable electronic system
- Programmable interval-, break-times and reversing unit
- RS232 interface for data transfer of process parameters (validation)
- Microprocessor control electronic system and precise digital display of all functions (also of rotational speed)
FRITSCH also offers a revolutionary Planetary Mill Generation premium line generation, worldwide unique in operation,
performance and safety, a new reference class, please have a look at Planetary Micro Mill PULVERISETTE 7 premium
line.
Max. feed size:
Final fineness:
Grinding bowl sizes:
Supply requirements:
Dimensions (WxDxH):
Type
Planetary Mono Mill
PULVERISETTE 6 classic line
Planetary Mill
PULVERISETTE 5 classic line model I
Planetary Mill
PULVERISETTE 5 classic line model II
Grinding
stations
10mm
< 1µm
80, 250, 500ml
100-120/200-240V/1~, 50-60Hz
370 x 530 x 500mm PULVERISETTE 6 classic line
580 x 670 x 570mm PULVERISETTE 5 classic line
1
Rotation
speed
rpm
100-650
Sample
volume
ml
225
Weight
PK
Cat. No.
kg
63
1
9.738 300
4
50-400
900
120
1
9.738 404
2
50-400
450
100
1
9.738 402
Grinding bowls and grinding balls must be ordered additionally.
498
E & OE.
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
NEW!
1 Grinding bowls for planetary ball mills PULVERISETTE 5/6 classic line
1
Fritsch
Material
Capacity
ml
80
250
500
80*
250
500
80*
250
500
80*
250
500
80*
250
80
Tempered steel
Tempered steel
Tempered steel
Stainless steel
Stainless steel
Stainless steel
Sintered corundum
Sintered corundum
Sintered corundum
Zirconium oxide
Zirconium oxide
Zirconium oxide
Hardmetal tungsten carbide**
Hardmetal tungsten carbide**
Adapter for grinding bowls
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.738 515
9.738 525
9.738 535
9.738 516
9.738 526
9.738 536
9.738 512
9.738 522
9.738 532
9.738 518
9.738 528
9.738 538
9.738 514
9.738 524
9.738 315
* One grinding bowl holder can hold either 2 x 80ml bowls or 1 x 80ml bowl together with a grinding bowl adapter mounted one on top of the other.
** Grinding bowl in a steel casing.
Grinding bowls are also available in agate and silicon nitride. Special gassing lids for grinding in an inert atmosphere and for mechanical alloying as well as the
GTM-system (Gas pressure and temperature measuring system), for measuring gas pressure and temperature during the grinding process are available.
NEW!
2 Grinding balls for grinding balls PULVERISETTE 5/6 classic line
2
Fritsch
Material
Tempered steel
Tempered steel
Tempered steel
Tempered steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Sintered corundum
Sintered corundum
Sintered corundum
Sintered corundum
Zirconium oxide
Zirconium oxide
Zirconium oxide
Zirconium oxide
Hardmetal tungsten carbide
Hardmetal tungsten carbide
Hardmetal tungsten carbide
Hardmetal tungsten carbide
Ball
dia.
mm
10
20
30
40
10
20
30
40
10
20
30
40
10
20
30
40
10
20
30
40
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.738 555
9.738 565
9.738 575
9.738 585
9.738 556
9.738 566
9.738 576
9.738 586
9.738 552
9.738 562
9.738 572
9.738 582
9.738 558
9.738 568
9.738 578
9.738 588
9.738 554
9.738 564
9.738 574
9.738 584
Grinding bowls are also available in agate and silicon nitride.
Grinding balls are also offered in the diameters 0.1mm to 3mm (to achieve a fineness down to the nanometer-range) as well as in 5mm and 15mm (have a
look at grinding balls for grinding bowls for planetary micro mill PULVERISETTE 7 premium line).
Recommended number of grinding balls per grinding bowl for PULVERISETTE 5/6
classic line
Grinding bowl
Useful capacity (sample volume)
Ball diameter
5mm
10mm
15mm
20mm
30mm
40mm
500ml
80 - 225ml
250ml
10 - 125ml
80ml
10 - 30ml
2000
100
70
25
8
4
1200
50
45
15
6
250
25
10
5
E & OE.
499
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1
NEW!
1 Planetary micro mill PULVERISETTE 7 premium line
As extension of the existing classic line planetary mills, FRITSCH offers now a new
premium line generation. For the first time ever, it is possible to reach rotational speeds
never known before, which achieves ultrafine grinding results down to the nano range.
Fritsch
FASTER, SIMPLER AND SAFER THAN EVER.
Features:
- Extremely high-speed milling thanks to sunken grinding bowls with up to 1100rpm
- Sensational centrifugal accelerations of up to 95 times the force of gravity for better results in shorter times
- 150% greater energy application than conventional Planetary Ball Mills
- Extremely easy grinding bowl change with just two motions
- Highest safety due to unique SelfLock-grinding bowl-clamping
- For the first time, the bowl and lid form a single unit, no additional tensioning, no incorrect operation
- Automatic check of the grinding bowl locks in the mill
- Blockage in the event of impermissible operating state
- Automatic parameter check performed before every grinding, guarantees exact reproducibility
- Via USB all data can be easily exported to save time
Max. feed size:
Max. sample quantity:
Final fineness:
Rotational speed of main disk:
Supply requirements:
Dimensions (WxDxH):
Net weight:
5mm
70ml
< 100nm
100 to 1100rpm
100-240V/1~, 50-60Hz, 1100W
400 x 580 x 360mm
44kg
Type
Planetary Micro Mill PULVERISETTE 7 premium line
PK
Cat. No.
1
6.233 706
Grinding bowls and grinding balls must be ordered additionally.
2
NEW!
2 Grinding bowls for planetary micro mill PULVERISETTE 7 premium line
Fritsch
Description
Stainless steel*
Stainless steel*
Stainless steel*
Sintered corundum*
Sintered corundum*
Sintered corundum*
Zirconium oxide*
Zirconium oxide*
Zirconium oxide*
Hardmetal tungsten carbide*
Hardmetal tungsten carbide*
Hardmetal tungsten carbide*
Capacity
ml
20
45
80
20
45
80
20
45
80
20
45
80
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
9.738 455
9.738 454
9.738 453
9.738 459
9.738 460
9.738 461
9.738 458
9.738 457
9.738 456
6.237 286
9.738 231
9.738 232
* Grinding bowl in a steel casing.
Special gassing lids for grinding in an inert atmosphere and for mechanical alloying as well as the EASY GTM - Gas pressure and temperature measuring
system, for measuring gas pressure and temperature during the grinding process and for controlling the grinding process are available.
3
NEW!
3 Grinding balls for grinding bowls PULVERISETTE 7 premium line
Fritsch
Material
Stainless steel
Stainless steel
Zirconium oxide
Sintered corundum
Zirconium oxide
Hardmetal tungsten carbide
Hardmetal tungsten carbide
Ball
dia.
mm
5
15
5
15
15
5
15
PK
Cat. No.
1
1
1
1
1
1
1
9.738 560
9.739 165
9.739 160
9.739 162
9.739 166
6.050 329
9.739 163
Grinding bowls are also available in agate, tempered steel and silicon nitride.
Grinding balls are also offered in the diameters 0.1mm to 3mm (to achieve a fineness down to the nanometer-range) as well as in 10mm and 20mm (have a
look at grinding balls for grinding bowls for planetary mono mill PULVERISETTE 6 classic line and planetary mill PULVERISETTE 5 classic line).
500
E & OE.
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
Recommended number of grinding balls per grinding bowl for PULVERISETTE 7
premium line
Grinding bowl
Useful capacity (sample volume)
Ball diameter
5mm
10mm
15mm
20mm
20ml
1 - 9ml
45ml
3 - 20ml
80ml
10 - 30ml
80
10
-
180
18
7
-
250
25
10
5
1 Mini mill PULVERISETTE 23
1
Ideal for fine comminution of smallest quantities for wet and dry grinding as well as for
Fritsch
cryogenic grinding. Its special spherical grinding bowl ensures much better performance
in grinding, mixing and homogenising compared with similar models for example in chemical analysis, chromatography,
mass spectrometry or x-ray structural analysis, preparation of samples for genetic research, homogenising of active
ingredients, preparation of extracts in the forensic analysis, grinding of pigments and precious materials.
Max. feed size:
Max. sample quantity:
Final fineness:
Supply requirements:
Dimensions (WxDxH):
Net weight
6mm
up to 5ml
5µm
100-240V/1~, 50-60Hz
200 x 300 x 300mm
7kg
Type
Mini Mill PULVERISETTE 23
PK
Cat. No.
1
9.739 345
Grinding bowls and grinding balls must be ordered additionally.
Recommended number of grinding balls per grinding bowl for mini mill
PULVERISETTE 23
Grinding bowl
Useful capacity (sample volume)
Ball diameter
5mm
10mm
15mm
5ml
0.01 - 1ml
10ml
0.2 - 1ml
15ml
0.5 - 5ml
20
1
-
30
3
1
60
5
2
2 Grinding bowls and grinding balls for mini mill PULVERISETTE 23
2
Fritsch
Type
Grinding bowl, PTFE, 5ml
Grinding bowl, stainless steel, 10ml
Grinding bowl, stainless steel, 15ml
Grinding ball, 5mm, stainless steel
Grinding ball, 10mm, stainless steel
Grinding ball, 15mm, stainless steel
PK
Cat. No.
1
1
1
1
1
1
9.739 343
9.739 346
9.739 347
9.738 560
9.738 556
9.739 165
Grinding bowls and balls are also offered in zirconium oxide and tempered steel, as well as grinding balls in 15mm diameter (have a look at grinding balls for
grinding bowls: planetary micro mill PULVERISETTE 7 premium line).
E & OE.
501
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1
1 Variable speed rotor mill PULVERISETTE 14
Ideal for fast, effective comminution of soft to medium-hard, brittle, fibrous materials, as
Fritsch
well as difficult-to-mill and temperature-sensitive samples. Cryogenic grinding, dispersion
and homogenisation is also one of the areas of operation. The variable speed rotor mill is an ultra-centrifugal mill with
variable speed settings between 6.000rpm and 20.000rpm and automatic speed regulation for constant milling in the
areas of analytic, biology, chemistry, agriculture and forestry, foodstuffs, plastics and textiles, pharmaceuticals,
environment/RoHS. For optimal material feeding the Vibratory Feeder LABORETTE 24 (optional) is recommended.
Max. feed size:
Throughput:
Sieve inserts:
Final fineness (d50):
Rotor speed:
Supply requirements:
Dimensions (WxDxH):
Net weight:
10mm
0.05 to 5L/h
0.08 to 6mm
40µm
6.000 to 20.000rpm
100-120/200-240V/1~, 50-60Hz, 1150W
310 x 480 x 470mm
23kg
Type
Variable speed rotor mill PULVERISETTE 14
PK
Cat. No.
1
9.738 281
Impact rotor and sieve ring must be ordered additionally.
2
2 Accessories for variable speed rotor mill PULVERISETTE 14 made of stainless steel
Fritsch
Type
Impact rotor with 8 fins
Impact rotor with 12 fins
Impact rotor with 24 fins
Sieve rings, trapezoidal holes 0.08mm
Sieve rings, trapezoidal holes 0.12mm
Sieve rings, trapezoidal holes 0.2mm
Sieve rings, trapezoidal holes 0.5mm
Sieve rings, trapezoidal holes 0.75mm
Sieve rings, trapezoidal holes 1mm
Sieve rings, trapezoidal holes 1.5mm
Sieve rings, trapezoidal holes 2mm
Sieve rings, round holes 1mm
Sieve rings, round holes 2mm
Sieve rings, round holes 4mm
Sieve rings, round holes 6mm
Conversion kit for large quantities
Vibratory feeder LABORETTE 24 for continuous feeding
Stand for vibratory feeder LABORETTE 24
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.738 282
9.738 283
9.738 284
9.738 286
9.738 287
9.738 288
9.738 289
9.738 285
9.738 290
9.738 278
9.738 279
9.738 291
9.738 292
9.738 293
9.738 294
9.738 329
9.738 299
9.738 298
Rotors and sieve rings are also available in others designs and materials. An extensive accessory programme with impact bar, pin insert, sample exhauster with
cyclone separator and much more is available for your specific application.
502
E & OE.
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1
Cutting mill PULVERISETTE 15 and universal cutting mill PULVERISETTE 19
Ideal for pre and fine grinding of soft to medium-hard as well as fibrous or tough materials.
Fritsch
They are essential for the areas of plastics, textiles, agriculture and forestry, environmental,
construction materials, chemistry, foodstuffs and for sample preparation for RoHS analysis. All grinding parts can be
removed for cleaning in just a few seconds without tools, unbeatable fast, simple and efficient. Different rotors, various
knife geometries and replaceable blades ensure maximum flexibility and durability. For controlling the abrasion
properties, the grinding tools are offered in different materials. The optimum airflow ensures fast grinding and secure
protection against clogging. The patented FRITSCH sample exhauster with cyclone separator (optional) ensures simple
feeding, fast throughput and good cooling.
9.738 421
Max. feed size:
Throughput:
Sieve inserts:
Supply requirements:
Dimensions (WxDxH):
* depending on the instrument type
2
up to 70 x 80mm*
up to 60L/h
0.25 to 6mm
400V/3~, 50-60Hz
420 x 480 x 690mm resp. 440 x 550 x 630mm*
9.739 300
Type
Cutting mill PULVERISETTE 15
Universal cutting mill PULVERISETTE 19
Feed
size
up to
mm
70 x 70
70 x 80
Throughput
max.
Rotation
speed
l/h
50
60
rpm
2800
2800
Weight
PK Cat. No.
kg
42
56
1 9.738 421
1 9.739 300
1
2
Instruments also available in other voltages.
Funnels, rotors, sieve inserts/sieve cassettes and collecting vessels must be ordered separately.
NEW!
3 Accessories for cutting mill PULVERISETTE 15
3
Fritsch
Type
Funnel for long and bulk solids
Cutting rotor made of tool steel
Sieve insert, trapezoidal holes 0.25mm
Sieve insert, trapezoidal holes 0.5mm
Sieve insert, trapezoidal holes 1mm
Sieve insert, trapezoidal holes 2mm
Sieve insert, square holes 4mm
Sieve insert, square holes 6mm
Collecting vessel, 3.5L
Collecting vessel, 60L with filter hose
Stand
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
7.900 140
9.738 424
9.738 432
9.738 433
9.738 435
9.738 437
9.738 441
9.738 442
6.231 269
9.738 449
9.738 429
Alternative funnels as well as sieve inserts made of stainless steel are also available in other perforations. Cutting rotors as well as the sieve insert are also
offered in chromium-free steel.
4 Accessories for universal cutting mill PULVERISETTE 19
4
Fritsch
Type
Standard funnel for long and bulk solids
Standard rotor with V-cutting,
edges and fixed knives made of tool steel
Sieve cassette , trapezoidal perforation 0.5mm
Sieve cassette , trapezoidal perforation 1mm
Sieve cassette , trapezoidal perforation 2mm
Collecting vessel, 3L
Large collecting vessel, 10L
Stand
PK
Cat. No.
1
1
6.510 319
9.739 321
1
1
1
1
1
1
9.739 331
9.739 333
9.739 335
9.739 350
9.739 351
9.738 429
Alternative funnels, cutting rotors in other materials and designs, sieve cassettes in alternative meshes and sample exhauster with cyclone separator are
available on request.
E & OE.
503
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1
1 Micro fine mills, Culatti
For the continuous grinding of dry and brittle substances. For example: plastic, minerals, slag, coke, coal, spices, glass,
cement clinker, oilseed rape, etc. The mill operates continuously without loss of material, and operates on the hammer
mill principle. With automatic quick-stop. Maximum permissible operating time: 15mins. Supplied with
1.0mm/1.5mm/2.0mm mesh sieves, rack with 12 receiver tubes and cleaning instruments.
Speed:
Dimensions (WxDxH):
Weight:
Supply requirements:
0 to 5000 rpm.
150 x 250 x 260 mm
6.5 kg
230 V 50/60 Hz.
Type
Culatti
2
PK
Cat. No.
1
9.737 840
NEW!
2 Analytical mill A 10 basic
Suitable for low-loss dry grinding of soft, hard and brittle substances
- With a built-in cooling chamber
- Removable, easy-to-clean, high-grade steel chamber
- 3 interchangeable cutters available
- Electronic overload protection
Specifications
Motor rating input/output:
Speed:
Chamber vol.:
Power-on time ON/OFF:
Auto power off:
Tangential speed:
Max. sample granule size:
Dimensions (WxDxH):
Weight:
Protection class DIN EN 60529:
Supply requirements:
Tested to DIN EN IEC 61010-1.
180/80W
20000rpm
50ml
5/10min
yes
57m/sec.
6mm
120 x 105 x 225mm
2.2kg
IP 21
230V 50/60Hz
Type
A 10 basic
3
IKA
PK
Cat. No.
1
9.737 800
NEW!
3 Accessories for Grinding mill, A10 basic
A 14 Beater, stainless steel
For most brittle materials with a Mohs hardness up to 5.
A 15 Beater, hard metal
Made from tungsten carbide for hard materials with a Mohs hardness up to 9.
A 17 Cutter, stainless steel
For specific lightweight materials like paper, dried plant parts, plastics and for smooth-elastic materials.
A 18 Grinding chamber reduction
For small grinding volumes.
Type
Description
A14
A15
A17
A 18
Beater, stainless steel*
Beater, hard metal
Cutter, stainless steel
Grinding chamber reduction*
*included in delivery
504
E & OE.
IKA
PK
Cat. No.
1
1
1
1
9.737 811
9.737 812
9.737 814
7.017 783
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1 Grinding mill, A11 basic
1
Newly designed batch analysis mill with two grinding functions: grinding hard, brittle
materials using a beater, or slicing soft, fibrous materials using a rotating cutter.
- speed without load: 28000rpm.
- supplied with 80ml standard grinding container and stainless steel beater.
Specifications
Motor rating input/output:
Speed:
Chamber vol.:
Power-on time ON/OFF:
Auto power off:
Tangential speed:
Max. sample granule size:
Dimensions (WxDxH):
Weight:
Protection class DIN EN 60529:
Supply requirements:
Tested to DIN EN IEC 61010-1.
IKA
160/100W
28000rpm (off load)
80ml
1/10 min
yes
53m/sec.
10mm
85 x 85 x 240mm
1.5kg
IP 43
230V 50/60Hz
Type
A 11 basic
A 11 basic UK
PK
Cat. No.
1
1
9.737 801
6.202 305
Optional accessories: A 11.4 Grinding chamber (250ml), A 11.1 Spare beater, A 11.2 Cutting blade, A 11.6 Double beater, A 11.5 Spare grinding chamber , A
11.7 Funnel, A 11.3 Beater
2 Accessories for Grinding mill, A11 basic
2
A 11.1 Spare beater
IKA
For pulverising substances with a Mohs hardness up to 6.
A 11.2 Cutter
For pulverising soft, fibrous grinding materials.
A 11.3 Beater, hard metal
For pulverising substances with a Mohs hardness up to 9, chrome-carbide coated
A 11.4 Grinding container, 250ml
Made of polycarbonate with stainless steel inlet. Not suitable for cooling with N2, only applicable with double beater A
11.6.
A 11.5 Spare grinding container, 80ml
Made of Tefcel (PTFE, glass faser-reinforced) with stainless steel inlet. Excellent resistance to chemicals and low
temperatures (- 200°C).
A 11.6 Dubbel beater
For use up to Mohs hardness 3. Only applicable with grinding chamber A 11.4.
A 11.7 Funnel
Prevents splashing by pouring in liquid nitrogen in the grinding chamber A 11.5.
Type
Description
A 11.1
A 11.2
A 11.3
A 11.4
A 11.5
A 11.6
A 11.7
Spare beater*
Cutter
Beater
Grinding container, 250ml
Spare grinding container, 80 ml*
Double beater
Funnel
PK
Cat. No.
1
1
1
1
1
1
1
9.737 815
9.737 806
9.737 807
9.737 805
9.737 816
9.737 817
9.737 818
*included in delivery
E & OE.
505
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
1 Universal mill M20
1
Batch mill suitable for dry grinding of hard and brittle substances.
- Double-walled grinding chamber can be cooled with water through two hose adapters
- Removable grinding chamber, easy to clean
- Two grinding chambers can be alternately operated using one drive
- M 21 blade incl. with delivery
Specifications:
Motor rating input/output:
Speed:
Overload protection:
Throughput/Charge max:
Material:
Feed size:
Dimensions (WxDxH):
Weight:
Supply requirements:
Protection class DIN EN 60529:
Tested to DIN EN IEC 61010-1.
IKA
440/225W
max. 20000rpm. off load
current limiter
250ml
stainless steel (AISI 304)
max. 5 to 7mm
170 x 170 x 350mm
6.6kg
230V 50/60Hz
IP21
Type
M 20
M 20 UK
PK
Cat. No.
1
1
9.737 828
4.007 942
Optional accessories: M 21 Spare cutter, stainless steel, M 20.1 Grinding chamber, M 23 Star-shaped cutter, M 22 Hard metal cutter
2 Universal mill M 20, accessories and spares
2
IKA
Type
Description
M 21
M 22
M 23
M 20.1
Spare cutter for M 20*
Hard metal cutter (tungsten carbide)
Star-shaped cutter (stainless steel)
Grinding chamber
PK
Cat. No.
1
1
1
1
9.737 829
9.737 830
9.737 831
9.737 832
PK
Cat. No.
1
1
1
1
1
1
1
1
9.737 842
9.737 843
9.737 844
9.737 845
9.737 846
9.737 847
9.737 848
9.737 849
*included in delivery
3
3 Micro fine mills, Culatti, accessories
Type
Base unit
Sieve insert 0.2mm
Sieve insert 0.5mm
Sieve insert 0.8mm
Sieve insert 1.0mm
Sieve insert 1.5mm
Sieve insert 2.0mm
Sieve insert 3.0mm
Please order sieve inserts separately.
We can supply this
manufactorer’s
whole
product range !
506
E & OE.
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills
2 3 Drive unit MF 10 basic
IKA
Universal laboratory grinder, comprising powerful drive unit for use with a choice of accessory grinding heads. The user
can choose between the impact grinding head for milling hard, brittle materials (see fig.) and the cutting head for
processing fibrous material. The maximum granule size output can be set by using various insert sieves (with apertures between 0.25mm and 3mm) placed
above the outlet. There is an NS29 standard ground joint at the outlet for attachment of receiving flasks. Grinding/cutting heads not included.
Specifications
Motor rating input/output:
Speed range:
Tangential speed with impact grinding head:
Tangential speed with cutting head:
Material in contact with product:
Power-on time ON/OFF:
Auto power off:
Dimensions with grinding head (WxDxH):
Weight with grinding head:
Protection class DIN EN 60529:
Supply requirements:
Tested to DIN EN IEC 61010-1.
Type
Description
MF 10 basic
Drive unit without head
1000/500W
3000 to 6500rpm.
31.4 m/sec.
22.5 m/sec.
Stainless steel AISI 316 L
120/130mins.
yes
320 x 300 x 380mm
9.7kg
IP22
230V 50/60Hz.
PK Cat. No.
1 9.737 780
1
Optional accessories: MF 10.1 Cutting-grinding head, MF 10.2 Impact grinding
head, MF Sieves
1
2
3
9.737 780
4 5 Accessories for microfine grinder MF10 basic, for in-line processes
IKA
Type
Description
MF 10.1
MF 10.2
MF 0.25
MF 0.5
MF 1.0
MF 2.0
MF 3.0
MF 4.0
Cutting head
Impact grinding head
Sieve
Sieve
Sieve
Sieve
Sieve
Sieve
PK
Cat. No.
1
1
1
1
1
1
1
1
9.737 781
9.737 782
9.737 783
9.737 784
9.737 785
9.737 787
9.737 788
9.737 789
4
5
E & OE.
507
5. Sample preparation
www.haeberle-lab.de
Grinding/Mills-Mortars
1
NEW!
1 Laboratory blender GT 95
Chemical-resistant design.
ROTOR
Consisting of:
chromium plated, zinc die cast motor unit, 2000ml polycarbonate container with handle, safety lid made of polyurethan.
Applications:
- for emulsifying; homogenising; grinding; blending; chopping; suspending
- for mixing viscous products and pastes
- for blending and grinding pigment cakes; biological organs, etc.
All parts can be easily removed and can be autoclaved (individually or fitted ready for use) at 120°C for 20 mins. The
mixer is therefore always ready for use and requires little space.
Safety features:
- The motor only runs when the lid is properly fitted
- The motor stops automatically when the lid is removed
- Conforms to CE, complies with the latest EU machinery safety guidelines
Technical data:
High grade, chromium-plated zinc die cast motor housing, is easy to clean, robust and does not age. The drive motor
has high temperature stability and stepless control between 500rpm and 17000rpm. The motor is controlled
electronically with an integral switching circuit. It operates separately from the stepless speed control of the soft-start
motor and enables speed stabilisation at full power, i.e. the motor can work at full power over the entire speed range.
Motor output:
Weight (without container):
Power:
800W
5.5kg
230V 50/60Hz
Type
GT 95 incl. 2000ml polycarbonate container
2
PK
Cat. No.
1
9.571 300
NEW!
2 Laboratory blender GT 95, accessories
Before starting each operation the durability and resistance of all blender materials, e. g.
glass, CNS, PP, rubber have to be checked concerning their tolerance against the substances
to process.
ROTOR
Attention: The glass containers are only to use with protective lid. Please order separately.
Description
2l stainless steel container HighPower, with lid and knife kit
2l polycarbonate container HighPower, with lid and knife kit
125ml glass container without baffles, without lid
250ml glass container without baffles, without lid
500ml glass container without baffles, without lid
1000ml glass container without baffles, without lid
1000ml glass container with baffles, without lid
Plexiglas protective lid incl. hold down weight for 125-1000ml containers
3
PK
Cat. No.
1
1
1
1
1
1
1
1
7.631 205
9.571 308
9.571 301
9.571 302
9.571 303
9.571 304
9.571 305
9.571 310
NEW!
3 LLG-Mortars only, porcelain, inside rough
DIN 12906
Capacity
ml
50
110
25
75
220
325
508
Height
mm
42
50
32
46
64
71
Ext.
diam.
mm
81
100
60
91
125
144
E & OE.
PK
Cat. No.
1
1
1
1
1
1
6.227 149
6.232 577
9.164 410
9.164 411
9.164 412
9.164 413
5. Sample preparation
www.haeberle-lab.de
Grinding/Mortars
NEW!
1 LLG- Pestle only, porcelain, rough
Head
dia.
mm
15
26
23
37
44
Length
PK
Cat. No.
mm
52
103
84
132
158
1
1
1
1
1
6.227 150
6.232 574
9.164 420
9.164 421
9.164 422
2 Mortars only, porcelain
2
To DIN 12906. With spout, pestle not supplied. Glazed externally. Inside rough.
Capacity
ml
70
170
400
700
1000
2600
6000
Int.
dia.
mm
65
90
130
150
180
240
330
Haldenwanger
PK
Cat. No.
1
1
1
1
1
1
1
9.164 206
9.164 209
9.164 212
9.164 215
9.164 218
9.164 225
9.164 235
3 Pestles only, porcelain
3
To DIN 12906. With glazed handle. Unglazed grinding surface.
Nominal
dia.
mm
63
90
125
150
180
Head
dia.
mm
24
30
36
42
55
1
Haldenwanger
Length
PK
Cat. No.
mm
115
135
150
175
210
1
1
1
1
1
9.164 306
9.164 309
9.164 312
9.164 315
9.164 318
Nominal size = mortar internal diameter
Special sizes available on request.
4 Mortar with pestle,Porcelain
4
Unglazed, with wooden handled pestle.
Ext.
diam.
mm
115
135
150
PK
Cat. No.
1
1
1
9.164 373
9.164 374
9.164 375
5 Mortars and pestles, MF
5
White. Melamine formaldehyde (MF). With spouted mortar. Resistant to boiling.
Autoclavable at 121°C.
Dia.
mm
125
150
Height
mm
80
90
BRAND
PK
Cat. No.
1
1
9.164 355
9.164 357
6 Mortars and pestles, Agate
6
Agate. Polished. Standard quality. Other sizes available on request.
Capacity
ml
9
25
50
100
Ext.
diam.
mm
50
75
100
125
Int.
dia.
mm
40
60
85
100
E & OE.
PK
Cat. No.
1
1
1
1
9.164 050
9.164 075
9.164 100
9.164 125
509
5. Sample preparation
www.haeberle-lab.de
Grinding/Mortars-Sieving/Sieve shakers
1 Mortar, stainless steel
1
Mortar and pestle head are both made from stainless steel.
Description
Mortar
Pestle
Bochem
Capacity
ml
250
PK
Cat. No.
1
1
6.900 119
6.079 568
2 3 Analytical Sieve Shakers
AS 200 basic/digit/control, AS 300 control, AS 450 control
2
Sieve shakers are used in research & development, quality control of raw materials,
interim and finished products as well as in production monitoring.
Retsch
Features:
- Sieving with 3D effect
- For wet and dry sieving
- Short sieving times
- Low-noise, maintenance-free
AS 200 basic: favourably priced basic model.
3
AS 200 digit: powerful comfort model with touch-sensitive keypad, digital display, interval sieving.
AS 200 control: like AS 200 digit, but microprocessor-controlled, with freely selectable intervals and digital vibration
amplitude setting. It can be calibrated and, for the first time, allows 100% reproducible sieving results worldwide, even
if different instruments are used. The AS 200 control has an integrated interface for the evaluation software EasySieve®.
At the same time it also offers all the requirements for test materials monitoring according to ISO 9000 ff.
AS 300 control: like AS 200 control; also suitable for sieves up to 315mm diameter and for higher loads.
AS 450 control: like AS 200 control but only suitable for 400mm diam. and 450mm diam. sieves. The optimized
electromagnetic drive with RETSCH's CET technology allows for an amplitude up to 2.2mm even with maximum loads
up to 25kg. Manual re-sieving is no longer required.
Specifications
Max. number of fractions (depending on sieve size):
AS 200, AS 300:
AS 450:
Movement of sample:
Height of sievetower
AS 200, AS 300:
AS 450:
Max. charge/quantity of sample:
AS 200:
AS 300 control:
AS 450:
Timer:
AS 200 digit, control, AS 300:
AS 200 basic:
Type
Measuring
range
AS 200 basic
AS 200 digit
AS 200 control
AS 300 control
AS 450 control
20µm to 25mm
20µm to 25mm
20µm to 25mm
36µm to 40mm
20µm to 125mm
510
Dimensions
(W x D x H)
mm
400 x 350 x 230
400 x 350 x 230
400 x 350 x 230
400 x 400 x 235
715 x 435 x 630
Weight
kg
30
30
30
35
220
9/17
14/11
orbital with vibration
up to approx. 450mm
up to approx. 940mm
3kg
5kg
25kg
digital
analog
For Sieve
sizes (diam.)
mm
100 / 150 / 200 / 203
100 / 150 / 200 / 203
100 / 150 / 200 / 203
100 / 150 / 200 / 203 / 305 / 315
400 / 450
E & OE.
PK
Cat. No.
1
1
1
1
1
9.739 223
9.739 224
9.739 273
9.739 241
9.739 277
5. Sample preparation
www.haeberle-lab.de
Sieving/Sieve shakers
NEW!
Analytical Sieve Shakers AS 400 control, AS 200 tap/ jet
AS 400 control:
The AS 400 control is used for the sieving of dry goods with test sieves of a diameter up
to 400mm. The uniform, horizontal circular motion ensures exact separation of the product to be sieved.
1
Retsch
Features:
- Sieving with circular sieving motion according to DIN 53477
- Free digital adjustment of all process parameters (time, speed or sieve acceleration, interval)
- Memory for up to 9 SOPs
- Integrated interface for evaluation software EasySieve®
Electrical supply data: 100-240 V, 50/60 Hz
The clamping devices of AS 200 and AS 300 are also suitable for the AS 400.
AS 200 tap:
For sieve analysis of certain products such as activated carbon, abrasives, coal, spices and diamonds, as specified in the
corresponding standards.
9.739 242
2
Features:
- Horizontal, circular sieving motion with vertical taps
- Suitable for dry sieving
- Robust and maintenance-free
Electrical supply data: different voltages, 1-phase
AS 200 jet:
The air jet sieving machine AS 200 jet is particularly suitable for light materials with particle sizes in the lower micron
range which tend to agglomerate.
9.739 276
Features:
- Open Mesh Function to reduce the number of near-mesh particles
- Operation with standard Retsch sieves, 203 mm (8") diameter, 1" or 2" high
- Adapter for 200mm sieves optional
- Free manual (standard) or automatic (accessory) pressure regulation
- High flexibility through adjustable nozzle speed
- Memory for up to 9 SOPs, additional Quick Start mode
3
Electrical supply data: 100-240 V, 50/60 Hz
Please order clamping devices (except AS 200 tap), sieves and collecting pans separately.
6.238 239
Specifications
Max. number of fractions (depending on sieve size):
AS 400 control:
AS 200 tap:
AS 200 jet:
Movement of sample:
AS 400 control:
AS 200 tap:
AS 200 jet:
Height of sievetower
AS 400 control:
AS 200 tap:
AS 200 jet:
Max. charge/quantity of sample:
AS 400 control:
AS 200 tap:
AS 200 jet:
Timer:
Type
Measuring
range
AS 400 control
AS 200 tap
AS 200 jet
45 µm to 63 mm
20 µm to 25 mm
10 µm to 4 mm
Dimensions
(W x D x H)
mm
540 x 507 x 260
735 x 530 x 675*
460 x 305 x 288
7/9/17
7/13
1 (2 with cyclone)
circular
circular with taps
dispersion by air jet
up to approx. 450mm
up to approx. 350mm
up to approx. 50mm
15kg
6kg
0.3 to 100g
digital
Weight
kg
70
92*
14
For Sieve
sizes (diam.)
mm
100 /150 / 200 /203 / 305 / 315 / 400
200 / 203
203
PK Cat. No.
1 9.739 242
1 9.739 276
1 6.238 239
1
2
3
*with sound protection cabinet
E & OE.
511
5. Sample preparation
www.haeberle-lab.de
Sieving/Sieve shakers
NEW!
Acessories for AS 200 jet
Retsch
Description
Vacuum cleaner, 230V, 50/60Hz (other electrical versions available)
Filter bags for industrial vacuum cleaner
Cyclone with collector (250ml wide-mouth bottle)
Automatic vacuum regulation
Adapter and lid for analysing sieves 200 x 50mm and 200 x 25mm
PK
Cat. No.
1
5
1
1
1
9.739 600
9.739 294
9.739 601
9.739 296
9.739 253
NEW!
1 Software EasySieve® for Sieve Shakers AS control/AS 200 tap/AS jet
1
Software for particle size analyses.
Retsch
Features:
- Automatic registration, evaluation and administration of measurement data
- Logical design, self-explanatory
- Measurement protocol in accordance with standards
- Easy selection and configuration of common analytical scales
- English and German
- For automatic control of sieve shakers AS 200 control, AS 300 control, AS 450 control, AS 400 control, AS 200 tap,
AS 200 jet
- For Windows® 2000/XP/Vista
Type
EasySieve® Single-user-licence, incl. adapter RS232-USB
Adapter RS232-USB
PK
Cat. No.
1
1
6.238 927
9.739 250
NEW!
Clamping device for Sieve Shakers AS series
Retsch
For
Description
AS 200 + AS 300 + AS 400
AS 200 + AS 300 + AS 400
AS 200 + AS 300 + AS 400
AS 300 + AS 400
AS 300 + AS 400
AS 200
AS 200
AS 200
AS 300
AS 300
AS 400
AS 400
AS 450
AS 450
AS 450
AS 450
Clamping device, comfort, for 200/203mm dia. sieves
Clamping device, standard, for 200/203mm dia. sieves
Clamping device economy for 100/150/200/203mm dia. sieves
Clamping device, standard, for 305/315mm dia. sieves
Clamping device, comfort, for 305/315mm dia. sieves
Universal clamping device, comfort, for 100/150/200/203mm dia. sieves
Universal clamping device, standard, for 100/150/200/203mm dia. sieves
Universal wet sieving clamping device, standard, for 100/150/200/203mm dia. sieves
Wet sieving clamping device, standard, for 305mm dia. sieves
Wet sieving clamping device, comfort, for 305mm dia. sieves
Clamping device, comfort, for 400mm dia. sieves
Clamping device, standard, for 400mm dia. sieves
Clamping device, standard, for 400/450mm dia. sieves
Clamping device, comfort, for 400/450mm dia. sieves
Wet sieving clamping device, standard, for 400/450mm dia. sieves
Wet sieving clamping device, comfort, for 400/450mm dia. sieves
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.739 226
9.739 227
9.739 228
9.739 261
9.739 260
9.739 229
9.739 230
9.739 231
9.739 251
6.232 828
9.739 265
9.739 266
9.739 262
9.739 267
9.739 268
9.739 269
Other accessories, such as sieve lids and intermediate receivers, are available on request.
Sieve Receivers, stainless steel
Stainless steel. In accordance to DIN ISO 3310-1 C and ASTM E 11-95.
Retsch
Description
100mm dia., with outlet
200mm dia., without outlet
200mm dia., with outlet
203mm dia., without outlet
203mm dia., with outlet
PK
Cat. No.
1
1
1
1
1
9.739 237
9.739 235
9.739 236
9.739 239
9.739 240
Other collecting pans are availlable on request.
2
2 Sieving aids
For difficult to separate materials which require dry sieving. Different aids are used
according to mesh size.
512
Retsch
Type
PK
Cat. No.
Steatite ball, 6mm dia., 150g
Nylon brushes
Vulkollan cube 12 x 12 x 12mm
Rubber ball, 20mm dia.
Agate ball, dia. 10mm
Test sieve rack for max. 10 sieves
up to 203mm dia., 50mm height
1
1
10
5
10
1
9.739 238
9.826 131
9.826 132
9.826 133
9.826 134
9.739 243
E & OE.
5. Sample preparation
www.haeberle-lab.de
Sieving/Sieve shakers
Test sieve sets for Sieve Shakers AS series
Retsch
For
AS 200
Dia.
mm
200
AS 300
305
AS 400
400
Description
Sieve set, mesh 45µm, 63µm, 125µm, 250µm,
500µm, 1mm, 2mm, 4mm, with receiver
Sieve set, mesh 630µm, 1.25mm,
2.5mm, 5mm, 10mm, 20mm, 31.5mm, with receiver
Sieve set, mesh 500µm, 1mm,
2mm, 5mm, 10mm, 20mm, with receiver
PK
Cat. No.
1
9.739 255
1
9.739 256
1
9.739 257
Other accessories, such as sieve lids and intermediate receivers, are available on request.
1 Vibratory sieve shaker ANALYSETTE 3 PRO and SPARTAN
1
For quantitative particle size analysis of dry samples and suspensions of all kind by dry
Fritsch
and wet sieving with woven test sieves. FRITSCH Sieve Shakers satisfy all requirements
for accurate and reproducible sieving analysis and perform automatic sieve analysis with the control and evaluation
software AUTOSIEVE, which is delivered free of charge. The top model ANALYSETTE 3 PRO guarantees absolutely
reproducible sieving results due to automatic amplitude control, programme selection, can be integrated into any
quality management system according to DIN EN ISO 9000, has an RS232-interface, to mention only some of its
innovative and practical features.
Sieving:
Sieve diameters:
Maximum number of sieves:
Sieves:
Measuring range:
Sample quantity:
Measuring time:
Power supply:
Dimensions (WxDxH):
Net weight:
dry or wet
100mm, 150mm, 200mm or 8"
10 x 50mm (full) or 18 x 25mm (half) height
woven mesh metal sieves
Dry sieving: 32µm to 63mm
Wet sieving: 20µm to 10mm
Dry sieving: up to 2kg (depending on the sample material and sieve used)
Wet sieving: 20 to 100g
Dry sieving: 3 to 20 mins
Wet sieving: 5 to 10 mins
100-240V/1~, 50-60Hz
370 x 400 x 200mm
21kg
Type
PK
Cat. No.
1
1
9.826 402
9.826 403
Sieve Shaker ANALYSETTE 3 PRO
Sieve Shaker ANALYSETTE 3 SPARTAN
Clamping lid, sieve pan and sieves must be ordered separately.
NEW!
Accessories for vibratory sieve shakers, ANALYSETTE 3 PRO and SPARTAN
Fritsch
Type
For
Plexiglas clamping lid for 8" / 200mm
dia. sieves
Clamping lid (without window)
for all test sieves up to 200mm / 8" dia.
Sieve tensioning system TorqueMaster
(incl. clamping lid)
Interposed sieve pan made of stainless steel
200mm dia., 50mm height
Interposed sieve pan made of stainless steel
8" dia., 2" height
Sieve pan, stainless steel
200mm dia., 50mm high
Sieve pan, stainless steel
8" dia., 2" high
Clamping lid, plexiglas with 2 rotation nozzles
for test sieves 8" / 200mm dia.
Sieve pan, stainless steel with outlet
200mm dia., 50 mm high
Interposed sieve ring with 3 nozzles
for test sieves 200mm dia.
Sieve pan, stainless steel with outlet,
8" dia., 2" high
Interposed sieve ring with 3 nozzles
for test sieves 8" dia.
E & OE.
PK
Cat. No.
Dry sieving
1
9.826 404
Dry sieving
1
9.826 405
Dry sieving
1
9.826 943
Dry sieving
1
9.826 939
Dry sieving
1
9.826 940
Dry sieving
1
9.826 444
Dry sieving
1
9.826 406
Wet sieving
1
9.826 401
Wet sieving
1
9.826 446
Wet sieving
1
9.826 447
Wet sieving
1
9.826 449
Wet sieving
1
9.826 450
513
5. Sample preparation
www.haeberle-lab.de
Sieving/Test sieves
Test Sieves
With unique advantages:
Retsch has developed an entirely new manufacturing process providing a level of quality
and uniformity in sieve manufacturing which had not previously been attained. Benefits:
1. Previously unattained product quality owing to fully automatic production and continuous optical inspection.
2. Innovative resistance welding technology guarantees permanently taut wire mesh.
3. High level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel (grades: 316 or 1.4435).
4. "one-piece cast" sieve frame and seamless mesh joint prevent cross contamination (no lead flash, no solder, etc.).
5. Maximum stability and optimum density of the sieve stack.
6. 15% lighter than traditional sieves whilst at the same time having larger sieving area.
7. Clear sieve marking and traceability by individual laser engraving on each sieve.
1
Retsch
1 Test Sieves, 200 x 50 mm.
Retsch
Mesh
size
µm
20
25
32
36
38
40
45
50
53
56
63
71
75
80
90
100
106
112
125
140
150
160
180
200
212
224
250
280
300
315
355
400
425
450
500
560
600
630
710
800
850
900
514
E & OE.
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.226 650
9.226 651
9.226 652
9.226 653
9.226 654
9.226 655
9.226 656
9.226 657
9.226 658
9.226 659
9.226 660
9.226 661
9.226 662
9.226 663
9.226 664
9.226 665
9.226 666
9.226 667
9.226 668
9.226 669
9.226 670
9.226 671
9.226 672
9.226 673
9.226 674
9.226 675
9.226 676
9.226 677
9.226 678
9.226 679
9.226 680
9.226 681
9.226 682
9.226 683
9.226 684
9.226 685
9.226 686
9.226 687
9.226 688
9.226 689
9.226 690
9.226 691
5. Sample preparation
www.haeberle-lab.de
Sieving/Test sieves
1 Test Sieves, 200 x 50 mm
1
DIN ISO 3310-1 and BS 410-1. Dimensions (dia. x h): 200mm x 50mm.
Retsch
Aperture
size
mm
1.00
1.12
1.18
1.25
1.40
1.60
1.70
1.80
2.00
2.24
2.36
2.50
2.80
3.15
3.35
3.55
4.00
4.50
4.75
5.00
5.60
6.30
6.70
7.10
8.00
9.00
9.50
10.00
11.20
12.50
13.20
14.00
16.00
18.00
19.00
20.00
22.40
25.00
26.50
28.00
31.50
35.50
37.50
40.00
45.00
50.00
53.00
56.00
63.00
71.00
75.00
80.00
90.00
100.00
106.00
112.00
125.00
E & OE.
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.226 692
9.226 693
9.226 694
9.226 695
9.226 696
9.226 697
9.226 698
9.226 699
9.226 700
9.226 701
9.226 702
9.226 703
9.226 704
9.226 705
9.226 706
9.226 707
9.226 708
9.226 709
9.226 710
9.226 711
9.226 712
9.226 713
9.226 714
9.226 715
9.226 716
9.226 717
9.226 718
9.226 719
9.226 720
9.226 721
9.226 722
9.226 723
9.226 724
9.226 725
9.226 726
9.226 727
9.226 728
9.226 729
9.226 730
9.226 731
9.226 732
9.226 733
9.226 734
9.226 735
9.226 736
9.226 737
9.226 738
9.226 739
9.226 740
9.226 741
9.226 742
9.226 743
9.226 744
9.226 745
9.226 746
9.226 747
9.226 748
515
5. Sample preparation
www.haeberle-lab.de
Sieving/Test sieves
1
1 Test Sieves, 200 x 25 mm
DIN ISO 3310-1 and BS 410-1. Dimensions (dia. x H): 200mm x 25mm.
Mesh
size
µm
20
25
32
36
38
40
45
50
53
56
63
71
75
80
90
100
106
112
125
140
150
160
180
200
212
224
250
280
300
315
355
400
425
450
500
560
600
630
710
800
850
900
We can supply this
manufactorer’s
whole
product range !
516
E & OE.
Retsch
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.226 750
9.226 751
9.226 752
9.226 753
9.226 754
9.226 755
9.226 756
9.226 757
9.226 758
9.226 759
9.226 760
9.226 761
9.226 762
9.226 763
9.226 764
9.226 765
9.226 766
9.226 767
9.226 768
9.226 769
9.226 770
9.226 771
9.226 772
9.226 773
9.226 774
9.226 775
9.226 776
9.226 777
9.226 778
9.226 779
9.226 780
9.226 781
9.226 782
9.226 783
9.226 784
9.226 785
9.226 786
9.226 787
9.226 788
9.226 789
9.226 790
9.226 791
5. Sample preparation
www.haeberle-lab.de
Sieving/Test sieves
1 Test Sieves, 200 x 25 mm.
1
DIN ISO 3310-1 and BS 410-1. Dimensions (dia. x H): 200mm x 25mm.
Retsch
Aperture
size
mm
1.00
1.12
1.18
1.25
1.40
1.60
1.70
1.80
2.00
2.24
2.36
2.50
2.80
3.15
3.35
3.55
4.00
4.50
4.75
5.00
5.60
6.30
6.70
7.10
8.00
9.00
9.50
10.00
11.20
12.50
13.20
14.00
16.00
18.00
19.00
20.00
22.40
25.00
26.50
28.00
31.50
35.50
37.50
40.00
45.00
50.00
53.00
56.00
63.00
71.00
75.00
80.00
90.00
100.00
106.00
112.00
125.00
E & OE.
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.226 792
9.226 793
9.226 794
9.226 795
9.226 796
9.226 797
9.226 798
9.226 799
9.226 800
9.226 801
9.226 802
9.226 803
9.226 804
9.226 805
9.226 806
9.226 807
9.226 808
9.226 809
9.226 810
9.226 811
9.226 812
9.226 813
9.226 814
9.226 815
9.226 816
9.226 817
9.226 818
9.226 819
9.226 820
9.226 821
9.226 822
9.226 823
9.226 824
9.226 825
9.226 826
9.226 827
9.226 828
9.226 829
9.226 830
9.226 831
9.226 832
9.226 833
9.226 834
9.226 835
9.226 836
9.226 837
9.226 838
9.226 839
9.226 840
9.226 841
9.226 842
9.226 843
9.226 844
9.226 845
9.226 846
9.226 847
9.226 848
517
5. Sample preparation
www.haeberle-lab.de
Sieving/Test sieves
1
1 Test Sieves, 203 x 50 mm
DIN ISO 3310-1 and BS 410-1. Dimensions (dia. x H): 203mm x 50mm.
Mesh
size
µm
20
25
32
36
38
40
45
50
53
56
63
71
75
80
90
100
106
112
125
140
150
160
180
200
212
224
250
280
300
315
355
400
425
450
500
560
600
630
710
800
850
900
518
E & OE.
Retsch
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.226 850
9.226 851
9.226 852
9.226 853
9.226 854
9.226 855
9.226 856
9.226 857
9.226 858
9.226 859
9.226 860
9.226 861
9.226 862
9.226 863
9.226 864
9.226 865
9.226 866
9.226 867
9.226 868
9.226 869
9.226 870
9.226 871
9.226 872
9.226 873
9.226 874
9.226 875
9.226 876
9.226 877
9.226 878
9.226 879
9.226 880
9.226 881
9.226 882
9.226 883
9.226 884
9.226 885
9.226 886
9.226 887
9.226 888
9.226 889
9.226 890
9.226 891
5. Sample preparation
www.haeberle-lab.de
Sieving/Test sieves
1 2 3 Mesh, polyester
1
Thermo-fixed PE mesh with temperature resistance from 75°C to +150°C (short). For long term heating max. 125°C.
Resistant to acids but not alkalis.
Dimensions: Minimum width 102cm, Length 100cm.
Mesh
size
µm
1
5
6
10
15
20
30
40
50
53
60
70
80
90
100
105
150
200
250
300
400
500
600
700
800
900
1000
1600
2000
3000
4000
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.068 210
9.068 211
9.068 212
9.068 213
9.068 214
9.068 215
9.068 216
9.068 217
9.068 218
9.068 219
9.068 220
9.068 221
9.068 222
9.068 223
9.068 224
9.068 225
9.068 226
9.068 227
9.068 228
9.068 229
9.068 230
9.068 231
9.068 232
9.068 233
9.068 234
9.068 235
9.068 236
9.068 237
9.068 238
9.068 239
9.068 240
NEW!
4 5 6 Mesh, Polyamide
2
3
4
Thermo-fixed Polyamide (Nylon) mesh is temperature stable from -40°C to +115°C. Dry in water from 95°C to 100°C.
Stability in acids is limited and dependant on concentration and temperature. Nylon exhibits outstanding stability in
alkalis, including sodium and potassium solutions. Its chemical behaviour with respect to organic solvents is moderate
to good. Minimum mesh width: 102cm, Length: 1m
Mesh
size
µm
1
5
6
10
15
20
30
40
50
60
70
80
90
100
125
150
200
250
300
400
500
600
700
780
800
900
950
1000
1150
1800
2000
3300
4000
E & OE.
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.068 276
9.068 277
9.068 278
9.068 279
9.068 280
9.068 281
9.068 282
9.068 283
9.068 284
9.068 285
9.068 286
9.068 287
9.068 288
9.068 289
9.068 290
9.068 291
9.068 292
9.068 293
9.068 294
9.068 295
9.068 296
9.068 297
9.068 298
9.068 308
9.068 299
9.068 300
9.068 301
9.068 302
9.068 307
9.068 303
9.068 304
9.068 305
9.068 306
5
6
519
5. Sample preparation
www.haeberle-lab.de
Sieving/Sample divider
1
1 Sample Divider PT 100
Rotary tube divider for the representative sample division with an extremely high division
accuracy. Rapid and easy handling of sample vessels thanks to quick-release clamps.
Retsch
Specifications:
- Feed size: to 10mm
- Number of samples: 8 (6 or 10 heads also available on request)
- Throughput/charge: 5000ml
- Dimensions (WxDxH): 400 x 347 x 840mm
- Weight: approx. 34kg
- Supply requirements: 230V, 50Hz
Supplied with: PT 100 incl. deviding head with 8 quick-release sample outlets, vibratory feeder DR 100/40 and 10
sample bottles (250ml).
Type
PT 100
2
PK
Cat. No.
1
9.739 107
2 Vibratory Feeder DR 100
For the continuous, automatic material conveyance to, and feeding of, sample dividers,
mills, balances or analytical and measuring apparatus.
Retsch
Specifications:
- Weight: approx. 10kg
- Supply requirements: 220-240V, 50Hz.
DR 100 supplied with: sample divider attachment, with plug-in, 40mm wide chute and mounting plate.
Accessories: Further hoppers, chutes and vibrating tubes made of stainless steel available on request.
Type
Vibrationary feeder DR 100
3
PK
Cat. No.
1
9.739 110
NEW!
3 Rotating Tube Divider PK 1000
For removal of one or several representative samples. Fixed or adjustable division ratio.
Retsch
Specifications:
- Suitable for pourable powder and granular bulk goods
- Feed size: up to 10mm, throughput/charge: 30L
- Number of samples: 1, 2, 3, 4 and 6 (depending on lower cone selected)
- Dimensions (WxDxH): 560 x 700 x 1150mm
- Weight: approx. 47kg, supply requirements: 220-240V, 50Hz
Supplied with: rotating tube divider with bottom cone and one adjustable sample outlet (max. division ratio 1:5),
vibratory feeder DR 100/75 and hopper, 10 x 500ml wide-mouth sample bottles and 1 x 30L reject collector.
For Art. No. 9.739 108 please order cone separately.
Type
Rotary divider PK 1000, incl.
vibratory feeder and lower cone 1:5
Bottom cone for PK 1000, 1 adjustable sample outlets
Bottom cone for PK 1000, 2 adjustable sample outlets
Bottom cone for PK 1000, 3 adjustable sample outlets
520
E & OE.
PK
Cat. No.
1
9.739 115
1
1
1
6.241 185
6.241 186
6.241 187
5. Sample preparation
www.haeberle-lab.de
Sieving/Sample divider
1 Sample Splitters, RT series
1
To provide separation of pourable powders and bulk materials on site and in the
laboratory. Operates independently of mains supply. Available in 6 sizes. Number of
samples: 2.
Type
RT 6.5
RT 12.5
RT 25
RT 37.5
RT 50
RT 75
Feed
size
up to
mm
6.3
12.5
25.0
37.5
50
75
Maximum
Throughput/
Charge
5L
5L
16 L
16 L
16 L
16 L
Dimensions
(W x D x H)
mm
300 x 270 x 250
300 x 270 x 250
620 x 420 x 260
620 x 420 x 260
620 x 420 x 260
620 x 420 x 260
Retsch
Weight
PK
Cat. No.
kg
3.50
3.50
21.50
21.50
21.50
21.50
1
1
1
1
1
1
9.739 200
9.739 201
9.739 202
9.739 203
9.739 204
9.739 205
2 Rotary cone sample divider LABORETTE 27
2
Creates the optimal basis for reliable analysis of a representative sample. Representative
Fritsch
samples division is the foundation for every precise analysis. The rotary cone sample
divider LABORETTE 27 achieves due to its unique combination of three methods previously unheard of dividing
precision. Variable division ratios and the design in several variants guarantee adaptation to a wide range of
applications with a dividing accuracy of up to 99.9%. For optimal sample feeding the vibratory feeder LABORETTE 24
(optional) is recommended.
Division:
Dividing ratio:
Number of sub-sets:
Max. particle size:
Max. feed volume:
Sample bottle capacities:
Power supply:
Dimensions (WxDxH):
Net weight:
of solid samples and suspensions, without modification
1:8, 1:10, 1:30
8, 10, 3
10mm, 2.5mm
4000ml, 2500ml, 300ml
15, 20, 25, 30, 250, 500ml
230V/1~, 50-60Hz
270 x 450 x 460mm
8kg
Type
Rotary cone sample divider LABORETTE 27
PK
Cat. No.
1
9.738 310
Instrument also available in other voltages.
Dividing heads must be ordered separately.
Accessories for rotary cone sample divider LABORETTE 27
Fritsch
Dividing
ratio
Material
Sample bottles
1:8
1:8
1:10
1:10
1:30
1:30
POM plastic
aluminium
POM plastic
aluminium
POM plastic
aluminium PTFE-coated
ml
500
500
250
250
15
15
PK
Cat. No.
1
1
1
1
1
1
9.738 316
9.738 313
9.738 317
9.738 318
9.738 319
9.738 314
All dividing heads are delivered inclusive of sample bottles and funnels.
E & OE.
521
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Dispersers
1 Homogeniser SilentCrusher S
1
Small model for use in microbiology
Heidolph
- Featuring a speed range up to 75000rpm the SilentCrusher S is by far the fastest and most silent homogenizer in the
world
- To protect your sample effectively from any thermal damage the drive system switches off automatically after
90 seconds
- Easy to use: Simply drop the reaction vessel into the drive system and it will start automatically
- If required, you can easily cool down samples by using ice or cold water. Three discs are included in every shipment
which allow for height positioning of any cooling tray
- Ideal for homogenising sample quantities from 0.8ml to 10ml and a viscosity up to 5000mPa s
- Choose from three different sterilisable generators: 3mm or 7mm, these options will certainly include a generator that
works best for your needs
Technical Data
Input Power:
Dimensions:
Drive (dia. x H):
Power Supply Pack (W x H x D):
Voltage:
Protection Class:
Weight:
24W
125 x 197mm
106 x 30 x 65mm
100-240V, 47-63Hz
IP30
0.8kg
Type
SilentCrusher S
PK
Cat. No.
1
9.570 135
2 Generators Homogeniser SilentCrusher S
2
- Homogenise with high quality generators made of corrosion resistant stainless steel
Heidolph
AISI 316
- SilentCrusher generators are easily disassembled for quick and convenient cleaning; ideal for multiple samples
- Generators are autoclavable up to 130°C or allow for air sterilization up to 180°C
- To ensure years of unlimited usage the ball bearings and the attachment for the generators are made of chemically
resistant PTFE
- 10 Polypropylene vessels which perfectly fit your generator of choice are included as a standard
Type
3F
5F
7F
522
Stator
dia.
mm
3.3
5.0
7.0
Shaft
length
min.
Output
particle
size
Capacity
mm
26
38
55
mm
<0.4
<0.4
<0.4
ml
0.8 to 1.0
2.0 to 4.0
6.0 to 10.0
Recommendations
for use
Reaction tubes
Test tubes
Test tubes
E & OE.
PK
Cat. No.
1
1
1
9.570 136
9.570 137
9.570 138
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Dispersers
1 Homogeniser SilentCrusher M
1
Model for all standard applications
-
Heidolph
With a speed range up to 26000rpm the SilentCrusher M is the most silent homogeniser in the world
Large digital display allows for easy setting and read out even from a distance
Speed can be adjusted individually from 5000rpm to 26000rpm
Your first choice for any quantities from 0.8ml to 2000ml
Allows for any viscosity up to 5000mPa s
Choose from 13 different sterilisable generators: From 6mm to 22mm diameter you will find options which meet your
specification
Type
SilentCrusher M
PK
Cat. No.
1
9.570 140
2 Generator for Homogeniser SilentCrusher M
2
- Homogenise with high quality generators made of corrosion resistant stainless steel
Heidolph
AISI 316
- SilentCrusher generators are easily disassembled for quick and convenient cleaning, ideal for multiple samples
- Generators are autoclavable up to 130°C or allow for air sterilisation up to 180°C
- Due to interchangeable ball bearings and chemically resistant PTFE, all bearings are designed for years of unlimited
usage
- For larger samples it may be necessary to pre-crush samples. In this case we recommend generators which feature
additional sprockets (except for 18G, 18DG, 22G)
- For applications under vacuum down to 20mbar or pressure up to 6 bar we recommend our sealed generators
Type
6F
8F
8 DF*
12 F
12 G
12 DF*
12 DG*
18 F
18 G
18 DF*
18 DG*
22 F
22 G
Stator
dia.
Rotor
dia.
Slit
width
mm
5.3
8.2
8.2
12.0
12.0
12.0
12.0
18.0
18.0
18.0
18.0
22.0
22.0
mm
3.20
6.60
6.60
9.00
9.00
9.00
9.00
12.50
12.50
12.50
12.50
16.50
16.50
mm
0.6
0.6
0.6
0.6
2.0
0.6
2.0
1.5
3.0
1.5
3.0
1.5
3.0
Length
mm
60
80
75
120
120
115
115
180
180
175
175
180
180
Capacity
Output
particle
size
ml
0.8 to 30
3 to 50
3 to 50
25 to 250
25 to 250
25 to 250
25 to 250
100 to 1500
100 to 1500
100 to 1500
100 to 1500
100 to 2000
100 to 2000
mm
< 0.4
< 0.4
< 0.4
< 2.0
< 2.0
< 2.0
< 2.0
< 4.0
< 4.0
< 4.0
< 4.0
< 4.0
< 4.0
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
9.570 139
9.570 141
9.570 142
9.570 143
9.570 144
9.570 145
9.570 146
9.570 147
9.570 148
9.570 149
9.570 150
9.570 104
9.570 105
* For applications under pressure or vacuum (max. pressure 6 bar/min. vacuum 20 mbar).
We can supply this
manufactorer’s
whole
product range !
E & OE.
523
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Dispersers
1
1 Accessories for Homogeniser SilentCrusher M
Plate stand
Footprint: 180 x 245mm, Shaft: diameter 13mm, Length: 600mm, Weight: 1.8kg
Heidolph
Cross sleeve S
Please note, 2 clamps are required to attach the SilentCrusher M and the vessel holding bracket.
Vessel holding bracket incl. 2 retainer rings
For different vessels diameter 20mm to 105mm
Type
Plate stand
Cross sleeve S
Vessel holding bracket incl. 2 retainer rings
524
E & OE.
PK
Cat. No.
1
1
1
9.570 151
9.570 152
9.570 153
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Dispersers
4 Disperser System Ultra-Turrax® Tube Drive
1
Disperse, stir, and grind using a single drive unit. Patented disposable disperser system
for volumes from 2ml to 50ml with hermetically sealable, disposable sample tubes.
Provides protection and safety from: Infectious samples, toxic substances, strong-smelling materials.
- no possibility of cross-contamination
- suitable for individual or serial operations
- increased safety due to low voltage (24V) power
- chemically resistant plastic containers
- anti-locking function
- patented
- worldwide service guaranteed by Ika®
ULTRA-TURRAX® Tube Drive Workstation supplied with:
Ultra Turrax® Tube Drive, 2 x DT-20 dispersing tubes incl. hook for removing the rotor-stator unit, 2 x ST-20 stirring
tubes, 2 x BMT-20 G/S Ball-mill-tubes (with glass balls/stainless steel balls, respectively), power supply and 1 x
removal hook for removal the rotor-stator unit.
Dispersing tubes (20ml and 50ml) with pierceable membrane and γ-sterilized are available on request.
IKA
9.570 500
2
ULTRA-TURRAX® Tube Drive control Workstation supplied with:
ULTRA-TURRAX® Tube Drive control , 1 x ST-20, 1 x DT-20 incl. 1 removal hook for removal the rotor-stator unit,
2 x BMT-20 G/S, power supply.
9.570 506
3
Specifications
Motor rating input/output
ULTRA-TURRAX® Tube Drive:
ULTRA-TURRAX® Tube Drive control:
Volume:
Viscosity max.:
Speed range
ULTRA-TURRAX® Tube Drive:
ULTRA-TURRAX® Tube Drive control:
Noise without element:
Timer
ULTRA-TURRAX® Tube Drive:
ULTRA-TURRAX® Tube Drive control:
Protection class according to DIN EN 60529:
Supply requirements:
Tested to DIN EN IEC 61010-1.
Description
Ultra-Turrax® Tube Drive
Ultra-Turrax® Tube Drive Workstation
ULTRA-TURRAX® Tube Drive control
ULTRA-TURRAX® Tube Drive control Workstation
DT-20 Dispersing Tube
ST-20 Stirring Tube
BMT-20 G Ball-Mill-Tube (with glass balls)
BMT-20 S Ball-Mill-Tube (with stainless steel balls)
20/17 W
28/17 W
2 to 50ml
5000mPas
300 to 6000rpm
400 to 800rpm
50dB(A)
4.008 150
4
1 to 59sec. (300 to 6000rpm)
1 to 29min. (300 to 4000rpm)
1 sec. up to 30min. (continuously adjustable)
IP20
100 - 240V 50/60Hz
Dimensions
(W x D x H)
mm
100 x 160 x 40
100 x 160 x 40
122 x 178 x 54
122 x 178 x 54
Weight
kg
0.75
0.90
PK
Cat. No.
1
1
1
1
25
25
25
25
9.570 500
9.570 506
4.008 150
4.008 135
9.570 507
9.570 508
9.570 509
9.570 510
1
2
3
50 ml tubes available on request.
E & OE.
525
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Dispersers
1
1 Disperser/ Homogenizer Miccra D-9
Light, compact, strong, with extremely high-speed. These are the features of this
Art Prozess- & Labortechnik
extraordinary drive which fits to all common laboratory applications from soil technology
to cell biology. A unique volume range from 0.1 up to 20000ml can be handled with this unit with unequalled results.
Specifications
Power input:
Power output:
Voltage/Frequency:
Volume range:
Speed range:
Speed adjustment:
Electronic stabilizer:
Weight:
Dimensions:
Protect.syst./safety class:
Overload protection:
Safety switch:
Smooth start:
Permissible ambient temp.:
Permissible ambient humid.:
CE label:
Warranty:
850W
495W
200 - 240V 50/60Hz
0.1 to 20000ml
11000 to 39000rpm
Yes
Yes
approx. 1.4kg
66 x 66 x 232mm
IP 20/II
Thermal Sensor
Yes
Yes
5 to 50°C
up to 85%
Yes
5 years
Type
Miccra D-9
2
PK
Cat. No.
1
4.006 938
2 Hand-held dispersing and homogenizing device MICCRA D-15
Although its size is small,this drive is a real high power unit. The successor of the
Art Prozess- & Labortechnik
MICCRA D-13, with its integrated constant electronics and its more powerful 1.520 Watt
motor works out large volumes, keeping a constant speed even with increasing viscosities.
Technical specification
Power input:
Power output:
Voltage/Frequency:
1520W
900W
200 - 240V 50/60Hz
110 - 120V 50/60Hz
100 - 50000ml
8800 -33600rpm
Yes
Yes
2.0kg
70 x 70 x 270mm
IP 20/II
Thermal Sensor
Yes
Yes
5 - 50°C
up to 85% R.H.
Yes
5 years
Volume range:
Speed range:
Speed adjustment:
Electronic stabilizer:
Weight:
Dimensions:
Protect.syst./safety class:
Overload protection:
safety switch:
Smooth start:
Permissible ambient temp.:
Permissible ambient humid.:
CE label:
Warranty:
Type
Miccra D-15
526
E & OE.
PK
Cat. No.
1
4.006 939
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Dispersers
1 Dispersing tools Pico Series, 316 L SS
1
Our "Pico" tool range applies particularly for smaller sample quantities in the bio and
Art Prozess- & Labortechnik
genetic sample preparation,
especially in PCR diagnostics. Whether you would like to extract RNA or cut up fabric for other analysis procedures.
The tools of the Miccra biotech range will accelerate and simplify your work without heating up the sample.
They are also reliable aids for cell determinations and enzyme studies. Combined with the high revving Miccra D-1 and
D-9 drives you will receive excellent results within seconds, which have been confirmed to us by various BSE
laboratories.
Technical data:
Material:
Rotor type:
Type
DS-5k-1*
DS-8/P**
DS-14/P**
316 L SS
Cutting rotor
Stator
type
mm
5mm ZkS
8mm ZkS
14mm ZkS
Outer
diameter
mm
5mm
8mm
14mm
Tool
lenght
mm
120mm
155mm
200mm
PK
Cat. No.
1
1
1
4.006 940
6.222 320
4.006 942
* Hybrid bearing
**PTFE (plain white)
2 Ultra-Turrax® T10 basic
2
Competitively priced dispersing instrument for volumes of 0.5ml to 100ml. A wide speed
IKA
range allows you to work at high circumferential speeds.
- maintains speed with various media thanks to high performance 125W drive
- ideal for manual operation thanks to its light weight and ergonomic form
- extremely mobile thanks to direct mains operation (no transformer required)
- stainless steel dispersing elements (5mm, 8mm and 10mm diameter) can be cleaned quickly and easily as they can
be dismantled without tools
- plastic disposable dispersing elements in two sizes, particularly suitable for PCR analysis
- quick-release coupling makes changing the dispersing elements easy
Supplied with: storage case to hold drive and accessory dispersing elements (to be ordered separately), spare seals and
R 200 clamp
Specifications
Motor rating input/output:
Working volume range (H2O):
maximum viscosity:
Speed range:
Speed adjustment:
Speed display:
Clamping rod diameter/length:
Dimensions:
Weight:
Protection rating to DIN EN 60529:
Tested to DIN EN IEC 61010-1.
125/75W
0.5 to 100ml
5000mPas
8000 to 30000rpm
stepless
Scale (1 to 6)
8 mm/100mm
46 x 57 x 201mm
0.4kg
IP30
Type
PK
Cat. No.
1
9.570 843
T10 basic Ultra-Turrax®
Dispersing heads Ultra Turrax® T 10 basic
Dispersing heads, plastic: Autoclavable. Dispersing heads, stainless steel: Ultimate fineness emulsions 1 to 10µm and
suspensions 5 to 25µm, sterilisable by all methods.
Type
Material
S 10 D - 7G - KS - 65
S 10 D - 7G - KS - 110
S 10 N - 5 G
S 10 N - 8 G
S 10 N - 10 G
PC, PSU
PC, PSU
PTFE, AISI 316L
PTFE, AISI 316L
PTFE, AISI 316L
3
Diam. rotor /
stator
mm
4.8 / 7
4.8 / 7
3,8 / 5
6,1 / 8
7,6 / 10
4
9.570 875
Max.
immersion
depth
mm
50
90
75
95
100
5
9.570 877
Working
volume
ml
1 to 20
1 to 40
0.5 to 10
1 to 50
1 to 100
6
7.631 964
IKA
PK
Cat. No.
25
25
1
1
1
9.570 875
9.570 877
7.631 964
6.225 614
6.225 477
3
4
5
6
7
7
6.225 614
6.225 477
Accessories please see page 531
E & OE.
527
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Dispersers
NEW!
1 Ultra-Turrax® T18 basic
1
-
For volumes of 1ml to 1500ml (H2O)
a broad operating range enables you to work at high rotational speeds
electronic speed control
electronic overload protection
quick release button for removing dispersing element
T18 is equipped with a connection for a revolution counter
Specifications
Motor rating input/output:
Working volume range (H2O):
Maximum viscosity:
Speed range:
Speed adjustment:
Speed display:
Noise without dispersing element:
Clamping rod diameter/length:
Dimensions (WxDxH):
Weight:
Protection rating to DIN EN 60529:
Supply requirements:
Tested to DIN EN IEC 61010-1.
IKA
500/300W
1 to 1500ml
5000mPas
3500 to 24000rpm.
stepless
Scale (1 to 6)
73 dB (A)
13mm/175mm
65 x 80 x 240mm
1.6kg
IP20
230V 50/60Hz
Type
Ultra-Turrax® T18 basic
T 18 basic ULTRA-TURRAX® Package (incl. S 18 N - 19 G)
PK
Cat. No.
1
1
9.570 840
9.570 846
Optional accessories: Dispersing heads, stands: R 1825, R 1826, R 1827, R 182 bosshead, RH 3 Strap clamp
2
2 Dispersing heads for Ultra Turrax® T18 basic
Plastic dispersing heads: Autoclavable
Stainless steel dispersing heads: Ultimate fineness emulsions 1 to 10µm and
suspensions 10 to 50µm, sterilisable by all methods.
Type
S 18 D-10 G-KS
S 18 D-14 G-KS
S 18 N-10 G
S 18 N-19 G
3
Diam. rotor /
stator
mm
6.75 / 10
9.5 / 14
Max.
immersion
depth
mm
85
85
70
170
Working
volume
ml
10 to 100
10 to 500
1 to 100
10 to 1500
IKA
Material
PK
Cat. No.
PC, PEEK
PC, PEEK
PTFE, AISI 316L
PTFE, AISI 316L
10
10
1
1
9.570 855
9.570 857
9.570 841
9.570 842
3 Homogenizer, Ultra-Turrax® T 25 digital
With choice of 15 easily interchangeable dispersing heads, volume range 1ml to 2000ml.
IKA
Also available are 5 additional grinding rotors, 3 seal types and several special dispersing
heads. Please order the appropriate accessory heads separately. Applications range from the homogenisation of sewage
samples to use in laboratory reactions, from vacuum/pressure dispersing tasks to sample preparation in medical
diagnostics. Supplied with interface for rev counter DZM control.
Specifications:
Motor rating
input/output:
Volume range (H2O):
Viscosity max.:
Speed range (under load):
Speed control:
Speed display:
Noise without element:
Dimensions (WxDxH):
Supply requirements:
Weight:
Protection class DIN EN60529:
Tested to DIN EN IEC 61010-1.
500/300W
1 to 2000L
5000mPas
3500 to 24000rpm.
stepless
LED
73dB (A)
65 x 80 x 240mm
230 V 50/60Hz.
1.6kg
IP20
Type
T 25 digital ULTRA-TURRAX®
T 25 digital ULTRA-TURRAX® UK
528
E & OE.
PK
Cat. No.
1
1
9.570 845
6.230 570
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Dispersers
Dispersing heads for T25 basic Ultra-Turrax®
Plastic dispersing heads: Autoclavable.
Stainless steel dispersing heads: Ultimate fineness: emulsions 1µm to 10µm and suspensions 5µm to 50µm, sterilisable by all
methods.
Type
S 25 D-10 G-KS
S 25 D-14 G-KS
S 25 N - 8 G
S 25 N - 10 G
S 25 N - 18 G
S 25 NK - 19 G
S 25 KV - 25 G
S 25 N - 25 G
S 25 N - 25 F
S 25 KV - 25 F
Diam. rotor /
stator
mm
6.75 / 10
9.5 / 14
6.1 / 8
7.5 / 10
12.7 / 18
12.7 / 19
17.0 / 25
17.0 / 25
18.0 / 25
18.0 / 25
Max.
immersion
depth
mm
85
85
85
85
165
165
225
165
165
225
Working
volume
ml
10 - 100
10 - 500
1 - 50
1 - 100
10 - 1500
25 - 1500
50 - 2000
50 - 2000
100 - 2000
100 - 2000
IKA
Material
PK
Cat. No.
PC, PEEK
PC, PEEK
PTFE, AISI 316L
PTFE, AISI 316L
PTFE, AISI 316L
PTFE, AISI 316L
FFPM / SIC, AISI 316L
PTFE, AISI 316L
PTFE, AISI 316L
FFPM / SIC, AISI 316L
10
10
1
1
1
1
1
1
1
1
9.570 859
9.570 861
9.571 098
9.571 207
9.571 119
9.571 121
9.571 198
9.571 200
9.571 201
9.571 199
1
2
3
Further dispersing heads are available on request.
1
2
9.570 859
3
9.570 861
9.571 200
4 High-power homogenizer, Ultra Turrax® T50 basic
4
High-performance dispersing instrument for volumes from 0.25L - 30L (H2O).
- Three types of shaft bearings
- Several rotor-stator configurations
- Agitator shaft R50 allows the use of the T50 basic as a "high-speed stirrer" (not included in delivery)
- Infinitely variable speed control, for continuous operation
- Reproducible operations due to constant speed even with viscosity changes
- Large selection of dispersing elements
- Plug-in connectors facilitate exchange of dispersing elements
- Electronic safety circuit and smooth start
- As standard, the T50 basic is equipped with a connection for the revolution counter
Specifications
Motor rating, input/output:
Volume range (water):
Max. viscosity:
Speed adjustment:
Speed range:
Speed stability:
Diameter/length of extension arm
Overload protection:
Speed display:
Noise without dispersing element:
Dimensions (WxDxH):
Weight:
Protection class DIN EN 60529:
Supply requirements:
Tested to DIN EN IEC 61010-1.
IKA
1100/700W
0.25 to 30L
5000mPas
stepless
500 to 10000rpm.
1%
16 mm/220mm
yes
scale
72 dB (A)
125 x 120 x 367mm
6kg
IP20
230V 50/60Hz.
Type
T 50 basic ULTRA-TURRAX®
T 50 basic ULTRA-TURRAX® UK
PK
Cat. No.
1
1
9.570 850
4.008 129
Optional accessories: Dispersing heads, Stands: R 2722, R 2723, R 271 Bosshead, RH 5 Strap clamp
Accessories please see page 531
E & OE.
529
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Dispersers
Dispersing heads for T50 basic ULTRA-TURRAX®
Stainless steel dispersing heads
Type
IKA
Diam. rotor /
stator
Max.
immersion
depth
mm
250
250
250
mm
36,0 / 45
40.5 / 45
40.0 / 45
S 50 N - G 45 G*
S 50 N - G 45 M*
S 50 N - G 45 F*
Working
volume
Ult. fineness
suspensions /
emulsions
µm
40 to 100
25 to 50
10 to 30
l
0.5 to 20
0.5 to 15
0.25 to 10
Material
PK
PTFE, AISI 316L
PTFE, AISI 316L
PTFE, AISI 316L
1
1
1
Cat. No.
9.570 882
9.570 886
9.570 896
1
2
3
* sterilisable by all methods
Further dispersing heads are available on request.
1
2
3
9.570 882
9.570 886
9.570 896
Special dispersing heads for disperser T50 basic
R 50 "high speed" stirring shaft
IKA
Using the R 50 stirring shaft, the T50 basic is quickly converted into a high speed stirrer. 700W power and 10000rpm are
provided for rapid mixing, dissolving, and breaking up pigment agglomerates. The conical shaft is supported by means of ball bearings, the mixing elements
have a screw connection. For operational safety a protective cage is fitted around the mixing element.
S 50 N - W 80 SMK Jet mixer head
For shortening mixing and dissolving times. The vertical flow and the high tangential speed, up to 10000rpm, ensure intensive mixing. The head is used for
adding gases or liquids, for lump-free suspension of difficult to dissolve powders or for dissolving sedimented, accreted substances.
S 50 N - W 65 SK Cutting head
To crush large pieces (up to 50mm) of fibrous materials, such as plant matter, vegetables and fruit.
Type
R 50
S 50 N - W 80 SMK
S 50 N - W 65 SK
Max.
immersion
depth
mm
180
350
350
Working
volume
PK
l
0.25 to 30
1 to 50
1 to 10
1
1
1
4
5
9.571 350
Type
R 1405 Propeller
R 1402 Dissolver
4
5
6
9.570 922
Rotor
dia.
mm
45
42
PK
1
1
7
8
9.197 053
530
9.571 350
9.570 926
9.570 922
6
9.570 926
Volume
range
L
0.25 to 30
1 to 30
Cat. No.
9.197 055
E & OE.
Cat. No.
9.197 053
9.197 055
7
8
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Dispersers
1 Homogenizer, Ultra-Turrax® T65 D
1
High-performance dispersing instrument designed for typical college laboratory quantities
of 2L to 50L (H2O).
- powerful three-phase motor
- three rotor/stator configurations available for diverse fields of application (not included with unit)
- plug-in dispersing elements make changes simple
- speed regulator available - details on request
- dispersing heads for production applications available - details on request
- supplied without cable and plug
Specifications
Motor rating, input/output:
Processing volume (H2O):
Suitable for viscosities up to:
Speed, fixed:
Speed stability:
Noise (without dispersing element):
Dimensions WxDxH:
Weight:
Protection class per DIN EN 60529:
Supply requirements:
IKA
1800/150W
2L to 50L
5000mPas
7200rpm
5%
75dB (A)
190 x 580 x 380mm
28kg
IP 54
400V 50Hz 3ph.
230V 60Hz 3ph.
Tested to DIN EN IEC 61010-1.
Type
PK
Cat. No.
1
9.570 505
T65D Ultra-Turrax®
Dispersion tools for Ultra-Turrax® T65D
Sterilisable by wet chemical method only.
Stator diameter:
65mm
Rotor diameter:
58mm
Material:
FFPM/SIC, AISI 316L
Type
Working
volume
l
2 to 50
2 to 40
2 to 30
S 65 KG-HH-G 65 G
S 65 KG-HH-G 65 M
S 65 KG-HH-G 65 F
IKA
Ult. fineness
suspensions /
emulsions
µm
25 to 75 / 5 to 25
20 to 50 / 5 to 15
5 to 20 / 1 to 10
3
2
Figure
PK
a
b
c
1
1
1
Cat. No.
9.570 933
9.570 934
9.570 935
2
3
4
4
9.570 933
9.570 935
9.570 934
Stands and fittings for Dispersers T 10/T 18/T 25/T 50/T 65 D
IKA
Type
Description
R 104
H 44
R 200
R 1825
RH 5
R 1826
R 1827
R 182
RH 3
R 2722
R 2723
R 271
T 653
Stand
Bosshead
Clamp
Stand with baseplate
Strap clamp
Stand with baseplate
Stand with baseplate
Bosshead
Strap clamp
H-stand
Telescopic stand
Bosshead
Telescopic stand
5
Rod
dia.
Height
mm
10
mm
370
16
560
16
16
800
1000
34
34
1010
620 - 1010
48
1200
7
6
7.631 971
9.232 994
For
model
9
9.224 031
E & OE.
1
1
1
1
1
1
1
1
1
1
1
1
1
T 10
T 10
T 10
T 18 / T 25
T 50
T 18 / T 25
T 18 / T 25
T 18 / T 25
T 18 / T 25
T 50
T 50
T 50
T 65 D
8
6.225 158
PK
Cat. No.
7.631 971 5
9.232 994 6
6.225 158 7
9.224 031 8
9.224 762
9.224 032
9.224 033
9.224 292 9
9.224 761 10
9.224 026
9.224 028
9.224 266
7.018 235
10
9.224 292
9.224 761
531
5. Sample preparation
Mixing, Homogenisation/Ultrasonic homogenizers
1
www.haeberle-lab.de
1 Ultrasonic Homogenizer SONOPULS mini20
-
pulse: ON cycles 0.1 to 60 secs.; OFF cycles 0.2 to 60 secs.
time modes, safety shut down: 59min, 59s
energy monitoring in kJ
remote control with PC: RS232 (infrared)
HF power: max. 20Weff
processing frequency 30kHz
electrical supply data: 230 V~, 50/60 Hz
Bandelin
Ready-to-operate for volumes from 0.1 ml to 25ml, consisting of HF generator mini20, ultrasonic converter mini20 and
microtip MS 2.5, diameter 2.5mm. Max. 12Weff HF output. Automatic amplitude control.
HF generator
Dimensions:
Weight:
Converter
Dimensions, dia. x H:
Weight:
Titanium probes:
GM mini20
250 x 256 x 154mm
2.0kg
UW mini20
Approx. 50mm x 160mm
270g
1.5mm and 2.5mm diameter
Type
SONOPULS mini20
2
PK
Cat. No.
1
9.650 160
2 Ultrasonic homogenizers, Sonopuls HD 2070/HD 2200
For cell disruption, emulsification and homogenising of materials, liquid degassing,
Bandelin
dispersion, extraction and for sonochemistry. Amplitude adjustable from 10 to 100%.
Values can be monitored on the digital display. Pulsation time and data can be stored in the integrated memory.
Processing frequency: 20 kHz, which is particularly effective. Fail-safe protection against operating when sample vessel
empty and during continuous operation. For 230V 50/60Hz supplies, alternatively available for 115V~, 50/60Hz supplies
on request. CE-marked, also as a medical device compliant to the in-vitro diagnostics directive 98/79/EG.
On/off switch control:
Amplitude adjustment:
Pulsation control:
Timer:
3
Possible directly at the converter, at the ultrasonic generator or via remote control (foot
switch)
Electronically stabilised from 10 to 100%, ±1%
10 to 100% permits heat dissipation when processing sensitive samples
1 sec. to 99 mins. : 59 sec. or continuous operation
3 Ultrasonic homogenizer, SONOPULS HD 2070
For volumes from 2ml to 50ml. Ready to operate, standard unit with GM
Bandelin
2070 generator, UW 2070 ultrasonic converter, SH 70 G titanium stepped horn probe
with external thread and MS 73 3 mm diameter micro tip. HF-output: max. 70 Weff. Titanium probes for other volumes
(1ml to 200ml) are available with probes from 2mm to 13mm diameter.
Type
SONOPULS HD 2070
PK
Cat. No.
1
9.650 180
HD 2070 (stand and vessel are not included in delivery).
4
4 Ultrasonic homogenizer, SONOPULS HD 2200
For volumes from 20ml to 900ml. Ready-to-operate standard unit with GM
Bandelin
2200 generator, UW 2200 ultrasonic converter, SH 213 G booster horn with external
thread and diameter 13mm titanium tip TT 13. HF-output: max. 200 Weff. Titanium probes for other volumes (2ml to
1000ml) are available with probes from diameter 2mm to 25mm.
Type
SONOPULS HD 2200
HD 2200 (stand and vessel are not included in delivery).
532
E & OE.
PK
Cat. No.
1
9.650 185
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Ultrasonic homogenizers
Ultrasonic homogenizers, SONOPULS HD 3100/ 3200/3400
-
Amplichron® control
Bandelin
amplitude setting adjustable in % or alternatively power control in W
Working frequency 20 kHz
Pulsation: operation intervals from 0.2 s up to 600 secs, rest intervals from 0.3 secs up to 600 secs
Timer 9 h: 59 min: 59 secs
Display of energy delivered to the sample in kJ
9 user programmes
Probe monitoring (of specific probes)
Automatic amplitude limiting after preselection of the probe
Temperature indication from 0 up to 120°C (248°F), either with unit shutdown or alarm indication when the maximum temperature is exceeded, using
optional temperature sensor
- WINPULS® remote control for process organisation with PC via RS232 and IR interfaces with IR adapter
- Backlit graphics LCD readout
- 230V~, 50/60Hz or 115V~, 50/60Hz
SONOPULS ultrasonic homogenizers are CE-marked, also as a medical device compliant to the in-vitro diagnostics directive 98/79/EG.
Applications: Disruption of highly-resistant bacteria, cells or tissues - Production of fine emulsions - Homogenization - Degassing of liquids - Sample
preparation for grain size analysis - catalysis of chemical reactions
HD 3100/HD 3200 (stand and vessel are not included in delivery)
1 Ultrasonic homogenizer, Sonopuls HD 3100
1
High-Tech for research - using small volumes.
Bandelin
For samples from 2 ml to 50ml, ready-to-operate standard set
with GM 3100 generator, UW 3100 ultrasonic converter , SH 70 G standard horn and MS 73 microtip, diameter 3 mm.
Max. 100W HF-output. - Processing frequency 20kHz. - for 230V 50/60Hz or 115V 50/60Hz supplies - For volumes from
1 ml to 200ml - 5 titanium probes, 2mm to 13mm diameter, are available.
HF generator
Dimensions:
Weight:
Converter
Dimensions:
Weight:
Titanium probes*:
GM 3100
250 x 256 x 170mm
2.0kg
UW 3100
70 x 120mm diameter
1kg
2mm, 3mm, 6mm, 13mm diameter
Type
SONOPULS HD 3100
PK
Cat. No.
1
9.650 170
* on request
HD 3100 (stand and vessel are not included in delivery)
2 Ultrasonic homogenizer, SONOPULS HD 3200
2
High-Tech for research - using larger volumes
For volumes from 20ml to 900ml, ready-to-operate standard set with generator GM
2200, ultrasonic converter UW 2200, booster horn SH 213 G and flat titanium tip TT 13 diameter 13 mm.
Bandelin
Max. 200W HF-output. - Processing frequency 20kHz. - For 230V 50/60Hz or 115V 50/60Hz supplies - For volumes from
2ml to 1000ml - 8 titanium probes available from 2mm to 25mm diameter.
HF generator
Dimensions:
Weight:
Converter
Dimensions:
Weight:
Titanium probes (diameter):
GM 3200
250mm x 256mm x 170mm
2.7kg
UW 3200
70 diameter x 120mm
1kg
2mm, 3mm, 6mm, 13mm, 19mm, 25mm
Type
SONOPULS HD 3200
PK
Cat. No.
1
9.650 175
* on request
HD 3200 (stand and vessel are not included)
E & OE.
533
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Ultrasonic homogenizers
1 Ultrasonic Homogenizer Sonopuls HD 3400
1
High tech for research and pilot plant stations
Bandelin
Ready-to-operate, basic unit for 100ml to 2500ml volumes consisting of generator GM
3400, ultrasonic converter UW 3400, threaded booster horn SH 3425 G and probe VS 200 T, 25mm diameter VS 190, T
19mm diameter on request. HF out put max. 400Weff.
HF generator
Dimensions:
Weight:
Converter
Dimensions, dia. x H:
Weight
Titanium probes*:
GM 3400
324 x 230 x 131mm
31kg
UW 3400
90 x 180mm
2.2kg
19.25mm diameter
Type
SONOPULS HD 3400
PK
Cat. No.
1
9.650 195
* on request
HD 3100/HD 3200 (stand and glas not included in delivery)
2
Booster horns and stepped horns for SONOPULS Ultrasonic homogenizers, titanium
alloy
3
Booster horns, stepped horns (titanium alloy) for connection of interchangeable
sonotrodes (probes). Further booster horns are available on request.
9.650 208
4
9.650 218
5
9.650 217
Type
Dia.
mm
13
19
25
13
19
25
Booster horn SH 213 G
Booster horn SH 219 G
Booster horn SH 225 G
Stepped horn SH 70 G
Booster horn SH 3419
Booster horn SH 3425
For
Bandelin
PK Cat. No.
HD 2200 / HD 3200
HD 2200 / HD 3200
HD 2200 / HD 3200
HD 2070 / HD 3100
HD 3400
HD 3400
1
1
1
1
1
1
9.650 208
9.650 218
9.650 217
9.650 205
9.650 204
9.650 209
2
3
4
5
9.650 205
Ultrasonic homogenizers, SONOPULS, accessories
Stainless steel stands HG 5/10, with base plate.
Clamping device KL 7 with rod, swivelling clamp and quick clamp for reaction vessels of
15mm to 100mm diameter.
Support table AT 7 suitable for KL 7 or in LS 8 and LS 10, for the safe stationing of ultrasonic irradiation vessels.
Type
Description
For
HG 5
HG 10
KL 7
AT 7
Stainless steel stand
Stainless steel stand
Clamping device
Support table
HD 2070/ 3100 / 2200 / 3200
HD 3400
HG 5 / HG 10
KL 7 or LS 8 / LS 10
6
534
PK Cat. No.
1
1
1
1
7
9.650 273
Bandelin
8
9.650 276
E & OE.
9.650 277
9.650 273
9.650 275
9.650 276
9.650 277
6
7
8
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Ultrasonic homogenizers
Probes for Sonopuls Ultrasonic homogenizers, titanium
Titanium probes.
For connection to stepped horns/booster horns.
Bandelin
Type
Dia.
Tip
For
MS 72
mm
2.0
microtip
MS 73
3.0
microtip
KE 76
6.0
tapered tip
TT 13
13.0
titanium flat tip
TT 13 FZ
13.0
titanium flat tip with hole
TT 19
TT 25
VS 70 T
19.0
25.0
13.0
titanium flat tip
titanium flat tip
probe long
VS 190 T
19.0
probe long
VS 200 T
25.0
probe long
SH 70 G
SH 213 G
SH 70 G
SH 213 G
SH 70 G
SH 213 G
SH 70 G
SH 213 G
FZ 5 G
FZ 7 G
SH 219 G
SH 225 G
SH 70 G
SH 213 G
SH 219 G
SH 3419
SH 225 G
SH 3425
UW mini20
UW mini20
MS 1.5
MS 2.5
1.5
2.5
microtip
microtip
1
For
bottle
ml
1 - 25
2 - 30
2 - 50
5 - 90
5 - 100
10 - 350
10 - 200
20 - 900
-
HD 2070 / 2200
HD 3100 / 3200
HD 2070 / 2200
HD 3100 / 3200
HD 2070 / 2200
HD 3100 / 3200
HD 2070 / 2200
HD 3100 / 3200
HD 2200 / 3200
1
9.650 244
1
9.650 245
1
1
9.650 246
2
1
9.650 250
1
9.650 247
25 - 900
30 - 1000
10 - 200
20 - 900
25 - 900
500 - 1500
30 - 1000
500 - 2500
0,1 - 10
0,5 - 25
HD 2200 / 3200
HD 2200 / 3200
HD 2070 / 2200
HD 3100 / 3200
HD 2200 / 3200
HD 3400
HD 2200 / 3200
HD 3400
Sonpuls mini20
Sonpuls mini20
1
1
1
9.650 248
9.650 249
9.650 239
1
9.650 243
1
9.650 240
1
1
9.650 165
9.650 166
2
9.650 245
For
PK
9.650 246
9.650 239
4
- Flow-through standard horn FZ 5 G with external screwthread and titanium flat tip TT
13 FZ.
- Flow-through standard horn FZ 7 G with external screwthread and titanium flat tip TT 13 FZ.
For
FZ 5 G
FZ 7 G
HD 2070 / HD 3100
HD 2200 / HD 3200
3
3
4 Flow-through standard horn for Sonopuls Ultrasonic homogenizers
Type
Cat. No.
Bandelin
PK
Cat. No.
1
1
9.650 241
9.650 242
5 Flow-through cell for SONOPULS Ultrasonic homogenizers, stainless steel
5
Flow-through cell for continuous flow-through processing. Stainless steel, sealed,
vibration-free reaction vessel with cooling jacket. For connection to SH 70 G or SH 213 G
with TT 13. For HD 2070, HD 2200, HD 3100 and HD 3200 homogenisers. Flow rate up to 30 L/hr.
Type
DG 4 G (flow-through)
Bandelin
PK
Cat. No.
1
9.650 269
6 Ultrasonic processing vessels for SONOPULS Ultrasonic homogenizers, plastic
6
Ultrasonic processing vessels. Plastic. For indirect ultrasonic irradiation. If BB 2 G is
Bandelin
ordered, titanium flat tip TT 13 is required. BB 6 fits directly to UW 2200/UW 3200.
Microtube holder EH6. Stainless steel. For simultaneous, contact-free ultrasonic irradiation of up to 6 samples using the
ultrasonic homogeniser HD 2200/HD 3200 and ultrasonic processing vessel BB 6.
Type
For
BB 2 G
BB 6
EH 6
HD 2070 / HD 3100
HD 2200 / HD 3200
BB6
E & OE.
PK
Cat. No.
1
1
1
9.650 253
9.650 254
9.650 258
535
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Ultrasonic homogenizers
1 Sleeve adapters for Sonopuls Ultrasonic homogenizers, PTFE
1
PTFE sleeve adapters for mounting probes into standard ground joint vessels. For use
with HD 2070/2200/3100/3200 homogenisers
- NA 29 G: for vessels with standard ground joint 29/32 and for SH 70/213 G horns
- NA 45 G: for vessels with standard ground joint 45/40 and for SH 70/213/219/225 G horns
Type
Bandelin
PK
Cat. No.
1
1
9.650 228
9.650 229
NA 29 G
NA 45 G
2
Ultrasonic homogenizer cup booster BR 30 for SONOPULS HD 2070/ 2200/ 3100/ 3200
For Sonopuls HD 2070, HD 2200, HD 3100 and HD 3200.
- BR 30 cup booster enables highly intensive sonication of small samples, e.g.
radioactively-contaminated seeds, maceration of cells or sonification of pathogenic or toxic substances.
- EH 3: Microtube holder for BR 30 for simultaneous sonification of up to 3 samples.
Specifications
Beaker capacity:
Int. height:
Int. diameter:
Max. ultrasound intensity:
Material:
9.650 190
3
Bandelin
12ml
15mm
32mm
3100 W/L (HD 2200/3200)
Titanium alloy
Type
PK
BR 30
EH 3
1
1
Cat. No.
9.650 190
9.877 745
2
3
Converter and stand are not included.
9.877 745
Accessories for SONOPULS Ultrasonic homogenizers HD 2200, glass
NEW!
Glass sample vessels for direct ultrasonic irradiation.
Bandelin
Type
KG 3 cooling vessel
KG 5 cooling vessel
DG 3 flow-through vessel
with cooling jacket
DG 5 flow vessel
with cooling jacket
RZ 1 rosett cell
RZ 2 rosett cell
RZ 3 rosett cell
RZ 4 rosett cell
RZ 5 rosett cell
SZ 3 Suslick cell
SZ 5 Suslick cell
4
Capacity
ml
15
70
15
HD 2070/2200/3100/3200
HD 2200/3200
HD 2070/2200/3100/3200
1
1
1
9.650 235
9.650 223
9.650 236
25
70
HD 2200/3200
1
9.650 224
13
13
13
25
25
13
25
25
40
110
390
660
20
110
HD 2070/2200/3100/3200
HD 2070/2200/3100/3200
HD 2070/2200/3100/3200
HD 2200/3200/3400
HD 2200/3200/3400
HD 2070/2200/3100/3200
HD 2200/3200
1
1
1
1
1
1
1
9.650 267
9.650 268
9.650 261
9.650 260
9.650 264
9.650 262
9.650 265
5
9.650 235
536
For
probes
up to Ø
mm
13
25
13
For
PK
6
9.650 236
E & OE.
9.650 261
Cat. No.
4
5
6
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Ultrasonic homogenizers
1 Sound proof boxes LS series
NEW!
Provides considerable noise level reduction.
Bandelin
1
LS 4: Made of plastic-coated walls. 10dB(A) damping.
LS 8/11: Made of stainless steel, with damping plates. 20dB(A) damping. With rod, swivelling clamp and bosshead for
height adjustment of sample vessels.
Type
For
LS 4
LS 8
LS 11
HD 2070 / 2200 / 3100 / 3200
HD 2070 / 2200 / 3100 / 3200
HD 3400
PK
Cat. No.
1
1
1
9.650 271
9.650 281
9.650 282
Accessories for sound proof box LS 8
2
3
For sonification using the BR 30 cup booster, support frame UG 6 allows BB 6 or BB 2G
Bandelin
acoustic irradiation cups to rotate through 180° within the LS 8 noise protection box
(not included with main instrument). Material: PTFE-coated, lacquered aluminium support with PTFE feet. Ultrasonic
converter UW 2070/2200/3100/3200 can be securely attached using the rapid snap fastener.
Description
PK
Support UG 6 for LS 8
Spacer AH 6 for LS 8*
9.650 238
Cat. No.
1
1
9.650 238
9.650 225
9.650 225
2
3
* Required for direct sonification using long probes.
4 Ultrasonic Processor UP50H/UP100H
For manual operation or for stand use, frequency 30kHz, automatic frequency tuning
system, amplitude adjustable 20% to 100%, pulse 0 to 100%, dry running protected, in
portable case, with mounting for stand STH-16 and mounting tools, 230V a.c.
Type
Hielscher Ultrasonics
Rating
W
50
100
UP50H
UP100H
PK
Cat. No.
1
1
5
4
9.106 600
6.235 231
5
6
6
9.106 600
6.235 231
Accessories for Ultrasonic Processor UP50H/UP100H
Sonotrode MS1, made of titanium, approx. length 80mm
Sonotrode MS3, made of titanium, approx. length 80mm
Sonotrode MS7, made of titanium, approx. length 80mm
Sonotrode MS10, made of titanium, approx. lenght 80mm (only for UP100H)
Hielscher Ultrasonics
Stand ST1-16, pole diameter 16mm, made of stainless steel, base (L x W x H) 300 x 150 x 600mm
Sound Protection Box SB2-16, with adjustable table and 16mm stand pole
Timer T1, from 00:00 to 99:59 (min:sec)
Type
Tip
MS1
MS3
MS7
MS10
ST1-16
SB2-16
T1
dia. 1mm
dia. 3mm
dia. 7mm
dia. 10mm
For
bottle
ml
0,1 - 5,0
5,0 - 100
10,0 - 250
20,0 - 500
E & OE.
PK
Cat. No.
1
1
1
1
1
1
1
9.106 602
4.005 989
9.106 604
4.005 990
6.226 573
6.235 330
6.235 003
537
5. Sample preparation
Mixing, Homogenisation/Ultrasonic homogenizers
1
www.haeberle-lab.de
1 Compact ultrasonic processor UP200S
Stand mounting, compact, robust unit, 200W, frequency 24kHz. With automatic
Hielscher Ultrasonics
frequency scanning system, amplitude adjustable 20% to 100%, pulse adjustable 0 to
100% and dry-running protected. Supplied in carrying case with mounting tools but without sonotrodes (probes). A
wide range of accessories are available on request (sonotrodes, sound protection, PC control, etc.).
Type
UP200S
2
PK
Cat. No.
1
9.106 606
2 Sonotrode for compact ultrasonic processor UP200S
Hielscher Ultrasonics
Type
Tip
S1
S3
S7
S14
S14D*
dia. 1mm
dia. 3mm
dia. 7mm
dia. 14mm
For
bottle
ml
0.1 to 5ml
5 to 200ml
20 to 500ml
50 to 1000ml
5 to 25L/h
PK
Cat. No.
1
1
1
1
1
9.106 607
9.106 608
9.106 609
9.106 610
9.106 611
* with glass flow vessel GD14K.
3
3 Ultrasonic Processor UP200H
For manual operation or for stand use, 200W, frequency 24kHz, automatic frequency
tuning system, amplitude adjustable 20% to 100%, pulse 0 to 100%, dry running
protected, in portable case, with mounting tools, 230V a.c.
Type
UP200H
4
Hielscher Ultrasonics
PK
Cat. No.
1
4.005 991
4 Accessories for Ultrasonic Processor UP200H
Sonotrode S3, titanium, approx. length 100mm
Sonotrode S7, titanium, approx. length 100mm
Sonotrode S14, titanium, approx. length 100mm
Sonotrode S40, titanium, approx. lenghth 100mm
Hielscher Ultrasonics
Stand ST1-16, rod diameter 16mm, stainless steel, base (L x W x H) 300 x 150 x 600mm
Sound Protection Box SB3-16, with adjustable table and 16mm stand pole
Timer T1, from 00:00 - 99:59 (min:sec)
538
Type
Tip
S3
S7
S14
S40
ST1-16
SB3-16
T1
dia. 3mm
dia. 7mm
dia. 14mm
dia. 40mm
For
bottle
ml
5.0 - 200
20 - 500
50 - 1000
100 - 2000
E & OE.
PK
Cat. No.
1
1
1
1
1
1
1
9.106 608
9.106 609
9.106 610
4.005 992
6.226 573
6.227 896
6.235 003
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Ultrasonic homogenizers
1 SonoStep Set
1
Ultrasonic processor, 100W, ultrasonic frequency 30kHz, microprocessor controlled,
Hielscher Ultrasonics
automatic frequency tuning system, amplitude adjustable from 20% to 100%,
adjustable propeller output signal 20% to 100%, dry running protected, with 15-pin interface (0 to 10V), mounting
tools, stainless-steel housing, IP65 grade, titanium resonator, thermocouple (AISI316Ti) with digital display, digital
power-meter, O-Rings made of EPDM, detachable stainless steel rotor (AISI316Ti) for pumping and stirring, acrylic
shield for noise reduction and spill protection, Dimensions (L x W x H): 280mm x 210mm x 350mm, 230V a.c.
Type
SonoStep Set
Timer T2
PK
Cat. No.
1
1
4.006 005
4.006 006
2
2 Ultrasonic Processor UIS250v for Eppendorf tubes
For handheld operation or for stand use, 250W. Ultrasonic frequency 24kHz, automatic
frequency tuning system, amplitude adjustable from 20% to 100%, pulse adjustable
from 0 to 100%, dry running protected, transducer protected to IP40 level, 230V a.c.
Type
UIS250v
Hielscher Ultrasonics
PK
Cat. No.
1
4.005 993
3 4 Accessories for Ultrasonic Processor UIS250v
3
Sonotrode LS24d3, titanium, approx. length 100mm
Hielscher Ultrasonics
Sonotrode LS24d5, titanium, approx. length 100mm
Sonotrode LS24d10, titanium, approx. length 100mm
Sonotrode VT24d10, titanium, with 1 bore hole diameter 10mm for sonication of one vial (outer diameter 10mm)
Sonotrode VialTweeter, titanium, with bores and clamping fixture for the sonication of up to 8 x 1.5ml Eppendorf tubes
Stand ST1-16clamp, rod diameter 16mm, made of stainless steel, base (L x W x H): 300 x 150 x 600mm
Timer T1, from 00:00 to 99:59 (min:sec)
Type
LS24d3
LS24d5
LS24d10
VT24d10
VialTweeter
ST1-16Clamp
T1
Tip
dia. 3mm
dia. 5mm
dia. 10mm
dia. 10mm
For
bottle
ml
5.0 - 200
20 - 300
50 - 1000
PK
Cat. No.
4
1
1
1
1
1
1
1
4.005 994
4.005 995
4.005 996
4.005 997
4.005 998
4.005 999
6.235 003
5 Ultrasonic Processor UIS250L for sieving
5
250W, ultrasonic frequency 24kHz, automatic frequency tuning system, amplitude
adjustable from 20% to 100%, pulse adjustable from 0 to 100%, dry running protected,
IP40 grade transducer , 230V a.c.
Type
UIS250L
E & OE.
Hielscher Ultrasonics
PK
Cat. No.
1
4.006 001
539
5. Sample preparation
Mixing, Homogenisation/Ultrasonic homogenizers
1
www.haeberle-lab.de
1 Accessories for Ultrasonic Processor UIS250L
Ring sonotrode RIS200, H = 35mm, for the use of standard laboratory test sieves (DIN
Hielscher Ultrasonics
ISO 3310/1)
Ring sonotrode RIS203, H = 35mm, for the use of standard laboratory test sieves (ASTM E 11-95)
Accessories set SZS200 for screens and ring sonotrode, Set: base plate, support rods with quick chuck, catch pan,
cover clamping
Type
RIS 200
RIS 203,5
SZS 200
2
Dia.
mm
200
203.5
200/203.5
PK
Cat. No.
1
1
1
4.006 002
4.006 003
4.006 004
NEW!
2 Shaker, Disruptor Genie®
For cell disruption and homogenisation. The patented Disruptor Genie provides a
multi-directional action, which simultaneously agitates and vortexes at high speed,
dramatically increasing cell disruption or sample resuspension efficiency.
Si Scientific Industries
- Dramatically increased sample disruption efficiency. Ideal for difficult glass bead procedures (Glass beads - please
order separately), cell disruption/homogenisation of yeast, bacteria, plant and animal tissues and pellet
resuspensions or anything that requires extremely violent, high-speed agitation.
- Patented multi-directional action simultaneously agitates and vortexes at high-speed producing greater yields in less
time
- Hands-Free disruption of up to twelve 1.5ml or 2.0ml microtubes with timer from 0 to 15 minutes or continuous
operation
- Performance comparable to expensive ultrasonic cell disruptors/homogenisers.
- Suitable for use in cold rooms or incubators
- Remove the microtube holder and attach the supplied pop-off cup for high-speed vortexing of single test tubes
- Also available as digital version
Supplied with:
- Disruptor Genie
- Tube holder for 12 tubes
- Universal Vortex attachement
Specifications
Dimensions (WxDxH):
Weight:
Supply requirements:
3
122 x 165 x 190mm
4.3kg
220V 50Hz, 250mA
Description
Connector
Disruptor Genie®, 2ml
Disruptor Genie®, 2ml
Disruptor Genie®, 1.5ml
Disruptor Genie®, 1.5ml
EU
UK
EU
UK
Cat. No.
1
1
1
1
9.730 092
9.730 093
9.730 095
9.730 096
NEW!
3 Accessories for Disruptor Genie®
Description
1.5ml Snap-top Microtube Holder
2ml Screw-cap Microtube Holder
0.1mm Disruptor Beads, 375g
0.5mm Disruptor Beads, 375g
540
PK
E & OE.
PK
Cat. No.
1
1
1
1
9.730 098
9.730 099
9.730 100
9.730 101
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Homogenisers
1 Homogenisers, General Purpose
1
- Clear or ground borosilicate glass mortars with a range from 5.0ml to 55ml capacity
- Choice of borosilicate glass pestles with ground glass working length or serrated PTFE
pestles
- Standard Stainless steel rod for use with an electric motor
- Optional Stainless steel handle for manual grinding
- All parts are fully autoclavable
GPE Scientific Limited
Grinding clearance pestle and mortar for PTFE pestles is 0.076mm to 0.126mm and for glass pestles 0.152mm to
0.254mm.
Order General Purpose range pestles and mortars separately. The pestle and mortars are listed separately,
so you can choose either a glass or PTFE pestle for use with the same mortar.
Mortars
Capacity
Mortar
L x o.d.
Glass
body
ml
5
10
15
30
55
5
10
15
30
55
mm
100 x 15
115 x 17
120 x 19
150 x 23
175 x 31
100 x 15
115 x 17
120 x 19
150 x 23
175 x 31
clear
clear
clear
clear
clear
ground
ground
ground
ground
ground
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
9.164 520
9.164 521
9.164 522
9.164 523
9.164 524
9.164 525
9.164 526
9.164 527
9.164 528
9.164 529
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
9.164 530
9.164 531
9.164 532
9.164 533
9.164 534
9.164 535
9.164 536
9.164 537
9.164 538
9.164 539
PK
Cat. No.
1
9.164 515
Pestles
For
Mortar
Pestle
L x o.d.
ml
5
10
15
30
55
5
10
15
30
55
mm
195 x 10
215 x 13
220 x 15
250 x 19
295 x 25
250 x 10
250 x 13
250 x 15
250 x 19
250 x 25
Material
borosilicate glass
borosilicate glass
borosilicate glass
borosilicate glass
borosilicate glass
PTFE*
PTFE*
PTFE*
PTFE*
PTFE*
*with stainless steel rod
Handle for General Purpose homogenisers
Description
Stainless steel handle for pestles
NEW!
2 Homogenisers, Safe-Seal, borosilicate glass/PTFE
Supplied complete with a PTFE pestle, stainless steel handle and borosilicate glass mortar
which is stoppered in PTFE to protect against splash back during the grinding
process.
Capacity
Pestle
L x o.d.
Mortar
L x o.d.
ml
5
10
15
30
mm
250 x 10
250 x 13
250 x 15
250 x 19
mm
140 x 15
150 x 17
155 x 19
180 x 23
E & OE.
2
GPE Scientific Limited
PK
Cat. No.
1
1
1
1
9.164 501
9.164 502
9.164 503
9.164 504
541
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Homogenisers
1
NEW!
1 Potter-elvehjem homogenisers, plastic coated
Uniform plastic coated tissue grinders afford an added measure of safety. Fully
autoclavable. Stainless steel handle - please order separately.
Capacity
Pestle
L x o.d.
Mortar
L x o.d.
ml
5
10
15
30
55
mm
250 x 10
250 x 13
250 x 15
250 x 19
250 x 25
mm
100 x 15
115 x 17
120 x 19
150 x 23
175 x 31
GPE Scientific Limited
PK
Cat. No.
2
2
2
2
2
9.164 510
9.164 511
9.164 512
9.164 513
9.164 514
NEW!
Homogenisers, Handle for Potter-elvehjem
Handle for Potter-elvehjem homogenisers
Description
Stainless steel handle for pestles
2
Capacity
Pestle
L x o.d.
Mortar
L x o.d.
ml
0.1
1.0
3.0
0.1
1.0
3.0
mm
75 x 3.65
150 x 5.00
170 x 9.00
75 x 3.65
150 x 5.00
170 x 9.00
mm
60 x 9
105 x 10
115 x 13
60 x 9
105 x 10
115 x 13
Description
with handle
with handle
with handle
without handle
without handle
without handle
Capacity
Pestle
L x o.d.
Mortar
L x o.d.
ml
5
mm
150 x 12
mm
95 x 18
9.164 515
NEW!
GPE Scientific Limited
PK
Cat. No.
1
1
1
1
1
1
9.164 541
9.164 542
9.164 543
9.164 544
9.164 545
9.164 546
NEW!
GPE Scientific Limited
PK
Cat. No.
1
9.164 550
NEW!
4 Homogenisers, Griffiths Tube, Borosilicate glass 3.3, large
Ground pestle and mortar, pestle has projections for coarse grinding.
Mortar length 220mm.
542
1
3 Homogenisers, Griffiths Tube, Borosilicate glass 3.3, small
For grinding bacterial emulsions and tissues, tube 90mm to 95mm long, 18mm o.d.
narrowing to ground rounded end. Ground half spherical pestle and mortar ends, ensure
perfect grinding.
4
Cat. No.
2 Homogenisers, Mini series, borosilicate glass
Manufactured from high quality borosilicate glass this range of mini homogenisers is
ideal for micro tissue work. Bodies are clear precision glass. Pestles have ground glass
working length. With or without handles. Fully autoclavable.
Grinding clearance pestle and mortar 0.152mm to 0.254mm.
3
PK
Capacity
Pestle
L x o.d.
Mortar
L x o.d.
ml
15
mm
305 x 14
mm
225 x 18
E & OE.
GPE Scientific Limited
PK
Cat. No.
1
9.164 551
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Homogenisers
NEW!
1 Homogenisers, Round Body, glass
1
The all-glass Uni-Form range of round body tissue grinders is made from sterilisable
GPE Scientific Limited
heat-resisting glass in capacities 5ml to 55ml. Models are available with rod ends for
motor drive, or hollow pestles designed for use with coolants/dry ice. Bodies are available in clear precision glass or
ground glass for more effective homogenisation of tougher tissues.
Grinding clearance pestle and mortar 0.152mm to 0.254mm.
Capacity
Pestle
L x o.d.
Mortar
L x o.d.
ml
5
10
15
30
55
5
10
15
30
55
5
10
15
30
55
5
10
15
30
55
mm
205 x 10
225 x 13
240 x 15
295 x 19
330 x 25
205 x 10
225 x 13
240 x 15
295 x 19
330 x 25
205 x 10
225 x 13
240 x 15
295 x 19
330 x 25
205 x 10
225 x 13
240 x 15
295 x 19
330 x 25
mm
105 x 15
130 x 17
140 x 19
170 x 23
205 x 31
105 x 15
130 x 17
140 x 19
170 x 23
205 x 31
105 x 15
130 x 17
140 x 19
170 x 23
205 x 31
105 x 15
130 x 17
140 x 19
170 x 23
205 x 31
Mortar
Pestle
clear glass
clear glass
clear glass
clear glass
clear glass
clear glass
clear glass
clear glass
clear glass
clear glass
ground glass
ground glass
ground glass
ground glass
ground glass
ground glass
ground glass
ground glass
ground glass
ground glass
hollow
hollow
hollow
hollow
hollow
with rod end
with rod end
with rod end
with rod end
with rod end
hollow
hollow
hollow
hollow
hollow
with rod end
with rod end
with rod end
with rod end
with rod end
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.164 660
9.164 661
9.164 662
9.164 663
9.164 664
9.164 665
9.164 666
9.164 667
9.164 668
9.164 669
9.164 670
9.164 671
9.164 672
9.164 673
9.164 674
9.164 675
9.164 676
9.164 677
9.164 678
9.164 679
For our Life Science produkt range - please see page 1165
NEW!
2 Homogenisers, Dounce, glass
2
For fine particle size reductions without damage to cell nuclei. Supplied with
GPE Scientific Limited
interchangeable pestles ground and polished to large and small clearances for use in the
same tube. Includes 2 larges pestle used for sample preparation and 2 tight pestles for final homogenate.
Capacity
Pestle
L x o.d.
Mortar
L x o.d.
ml
1
7
15
40
mm
117 x 7.5
175 x 13
210 x 15
285 x 25
mm
82 x 12
125 x 17
160 x 19
210 x 31
PK
Cat. No.
1
1
1
1
9.164 690
9.164 691
9.164 692
9.164 693
NEW!
3 Homogenisers, Duo-Form, Borosilicate glass 3.3
The pestles are conicaly shaped at the tip and cylindrically shaped in the upper part. This
combination gives two separate areas, one for initial grinding and a second for final
homogenisation.
Capacity
Pestle
L x o.d.
Mortar
L x o.d.
ml
15
15
15
15
mm
250 x 15
250 x 15
250 x 15
250 x 15
mm
155 x 19
155 x 19
155 x 19
155 x 19
Mortar
Pestle
ground
clear glass
ground
clear glass
with rod
with rod
with handle
with handle
E & OE.
3
GPE Scientific Limited
PK
Cat. No.
1
1
1
1
9.164 680
9.164 681
9.164 682
9.164 683
543
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Homogenisers
1
1 Duall homogenisers, with glass pestle
With conical and cylindrical area for effective tissue for grinding and also for homogenising. Especially suitable for
cellular tissue such as muscle, heart and lungs. The pestle is sufficiently stable to be motor driven. The space between
the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely
interchangeable.
Size
Capacity
ml
1
3
5
15
30
50
20
21
22
23
24
25
2
Pestle
L x o.d.
Mortar
L x o.d.
mm
155 x 6
207 x 6
220 x 8
278 x 10
310 x 10
345 x 16
mm
80 x 13
120 x 16
150 x 18
175 x 25
215 x 32
225 x 38
PK
Cat. No.
1
1
1
1
1
1
9.651 637
9.651 638
9.651 639
9.651 641
9.651 642
9.651 643
2 Duall homogenisers, with PTFE pestle
With conical and cylindrical area for effective tissue for homogenising. The PTFE pestle is ideal for soft tissue such as
brain or liver. The pestle is suitable for motor drive. The space between the pestle and mortar is between 0.1mm to
0.15mm. Spare components are available and are completely interchangeable.
Size
Capacity
ml
1
3
5
15
30
50
20
21
22
23
24
25
3
Mortar
L x o.d.
Pestle
L x o.d.
mm
155 x 4.5
210 x 6
228 x 6
268 x 6
305 x 10
330 x 10
mm
80 x 13
120 x 16
150 x 18
175 x 25
215 x 32
225 x 38
PK
Cat. No.
1
1
1
1
1
1
9.651 656
9.651 657
9.651 658
9.651 659
9.651 660
9.651 661
3 Potter-elvehjem homogenisers, with glass pestle
All-glass. Pestle is suitable for motor drive. The space between the pestle and mortar is between 0.1mm to 0.15mm.
Spare components are available and are completely interchangeable.
Size
Capacity
ml
1
5
8
17
45
19
21
22
23
24
4
Pestle
L x o.d.
Mortar
L x o.d.
mm
145 x 5
205 x 6
215 x 8
265 x 10
315 x 10
mm
95 x 13
140 x 16
150 x 18
175 x 25
220 x 32
PK
Cat. No.
1
1
1
1
1
9.651 674
9.651 675
9.651 676
9.651 677
9.651 678
4 Potter-elvehjem homogenisers, with PTFE pestle
With PTFE pestle and glass mortar. Sizes 21 and 24 have notches on the bottom edge of the pestle so that particles can
be transported up to the cylindrical part of the mortar for extraction. The space between the pestle and mortar is
between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.
544
Size
Capacity
Pestle
L x o.d.
Mortar
L x o.d.
18
19
20
21
22
23
24
ml
0.5
1
3
5
8
17
45
mm
130 x 3
154 x 5
154 x 5
215 x 6
212 x 6
266 x 6
269 x 6
mm
80 x 12
95 x 12
115 x 12
140 x 15
150 x 19
175 x 25
220 x 32
E & OE.
PK
Cat. No.
1
1
1
1
1
1
1
9.651 689
9.651 690
9.651 691
9.651 692
9.651 693
9.651 694
9.651 695
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Homogenisers
1 2 3 Homogenisers with PTFE pestles
Glass homogeniser mortar with conical or cylindrical PTFE pestles mounted on corrosion-resistant, stainless steel shafts. Inert.
Resilient. With smooth, wax-like, moisture-repellent surface. Glass-fibre reinforced pestles are available for grinding particularly
tough materials.
For all common homogeniser drives or for schuett homgenplus.
Glass mortar Type 1:
Glass mortar Type 2:
Glass mortar Type 3:
Glass
mortar
type
With flared overflow neck and spout, conical (Fig. A)
Without flared overflow neck, cylindrical (Fig. B)
With flared overflow neck and spout, cylindrical (Fig. C)
Capacity
ml
2
15
40
2
5
10
15
20
30
40
5
10
15
30
40
1
1
1
2
2
2
3
2
2
3
2
2
3
2
3
schuett-biotec
Form
PTFE pestle tapered
PTFE pestle tapered
PTFE pestle tapered
PTFE pestle cylindrical
PTFE pestle cylindrical
PTFE pestle cylindrical
PTFE pestle cylindrical
PTFE pestle cylindrical
PTFE pestle cylindrical
PTFE pestle cylindrical
PTFE pestle cylindrical, glass-fibre reinforced
PTFE pestle cylindrical, glass-fibre reinforced
PTFE pestle cylindrical, glass-fibre reinforced
PTFE pestle cylindrical, glass-fibre reinforced
PTFE pestle cylindrical, glass-fibre reinforced
2
1
PK
Cat. No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.651 850
9.651 851
9.651 852
9.651 853
9.651 854
9.651 855
9.651 856
9.651 857
9.651 858
9.651 859
9.651 860
9.651 861
9.651 862
9.651 863
9.651 864
3
4 5 6 Homogenisers with glass pestles
Glass homogeniser mortar with glass pestle.
With robust glass shaft and ground surface cylindrical or conical pestle heads. Highly
efficient for use with tough tissues. For all common homogeniser drives or for schuett homgenplus.
Glass mortar Type 4:
Glass mortar Type 5:
Glass mortar Type 6:
With flared overflow neck and spout, conical (Fig. A)
Round bottom, with flared overflow neck, without spout, cylindrical (Fig. B)
Round bottom, with flared overflow neck, with spout, cylindrical (Fig. C)
Glass
mortar
type
Form
Capacity
ml
2
15
40
8
15
40
4
4
4
5
5
6
4
schuett-biotec
Glass pestle, tapered
Glass pestle, tapered
Glass pestle, tapered
Glass pestle, cylindrical
Glass pestle, cylindrical
Glass pestle, cylindrical
5
PK
Cat. No.
1
1
1
1
1
1
9.651 865
9.651 866
9.651 867
9.651 868
9.651 869
9.651 870
6
E & OE.
545
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Homogenisers
EPPI pestle for tubes (Pellet)
1
For homogenising in Eppendorf®-type 1.5ml/2.0ml reaction tubes (exact fit).
schuett-biotec
EPPI pestle, conical, stainless steel:
Crevice-free, no cross-contamination, easy to clean and autoclaveable. Suitable for operation with liquid nitrogen.
EPPI pestle, conical, PP and quick-change chuck (please order separately):
For easy exchange of pestles without stopping the motor when using a semi-automatic. Increases the productivity, no
cross contamination with serial samples
For all common homogeniser drives or for schuett homgenplus.
9.197 690
2
Type
Shaft
diameter
Stainless steel EPPI pestle
Polypropylene EPPI pestle
Quick-change chuck, stainless steel
dia. 4.9mm
dia. 4.9mm
Length
mm
100
70
PK
Cat. No.
1
10
1
9.197 690
9.197 689
9.197 691
1
2
9.197 689
3
3 Homogeniser drive unit, schütt homgenplus
For the gentle homogenisation of biological samples or for grinding tough, rigid material
schuett-biotec
which is difficult to break down. Complete with load-compensating drive unit and
universal quick-action chuck, transparent Plexiglas cooling jacket and multi-purpose spanner for centring homogenising
vessels of varying sizes. Portable, but highly stable and vibration-free due to its triple-post frame construction, and easy
to use. Provides high torque, even at the low speed range, ensuring extremely powerful homogenizing. Continuously
adjustable speed range: 40rpm to 3000rpm. Provides reproducible homogenising by maintaining constant rotational
speed, which is shown on an easy to read, 4-digit LED display. The fast-action clamping chuck with hollow shaft permits
rapid and easy replacement of the pestle and allows pestles with longer shafts to be used. We highly recommend using
a quick-grip chuck for glass pestles to minimise lateral movement (and therefore strain) of the glass shaft. The cooling
jacket incorporates a clamping holder suitable for Eppendorf test tubes and homogenising vessels with outside
diameters from 10mm to 40mm. Sample cooling is easily achieved using ice, which can be introduced into the cooling
jacket through a screw capped opening. The homogenising vessel moves up and down in conjunction with the cooling
jacket platform and is raised and lowered using a lever jack. The long lever facilitates thorough homogenising without
much effort.
For 230V 50/60Hz, 300 W single phase supplies (optionally available for 115V 50/60Hz).
We also offer a sterile alternative for use in a glove box and with infectious material. Details on request.
Type
External
dimensions
(W x D x H)
mm
300 x 350 x 888
-
schuett homgenplus, 230 V
Quick-change chuck
for glass pestle
We can supply this
manufactorer’s
whole
product range !
546
E & OE.
PK
Cat. No.
1
1
9.651 560
9.651 564
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Homogenisers
LLG-Micropestles, stainless steel
NEW!
Polished stainless steel, micropestles. Precise fitting, manufactured in one-piece, smooth handle sections, can be disinfected easily. Minimum homogenate
displacement due to tapered piston.
For Reaction tubes:
For homogenisation of cells, tissues or foodstuffs/feed samples.
- For tubes with 0.5ml, 1.5ml and 2.0ml
- Can be cooled down to -196°C
- Sterilisable in an autoclave or dry heat at +200°C
- Suitable for PCR applications
- Alternative to single-use plastic pestles
For Sarstedt tubes:
Primarily used with food analysis with light and highly processed samples.
- For tubes 13ml
For
bottle
ml
0.5
1.5
2.0
13.0
Length
PK
mm
94
124
120
190
1
1
1
1
1
2
9.314 500
3
9.314 501
Cat. No.
9.314 500
9.314 501
9.314 502
9.314 503
1
2
3
4
4
9.314 502
9.314 503
5 Disposable micro pestles, PP
5
Autoclavable polypropylene. Suitable for battery-operated drive motor (9.314 496). Pestle length 7cm. Supplied with
microcentrifuge tubes as outlined below.
Description
Pestle for 0.5ml with
microcentrifuge tubes
Pestle for 1.5ml with
microcentrifuge tubes
0.5ml pestle
Pestle for 0.5ml with
microcentrifuge tubes*
Pestle for 1.5ml with
microcentrifuge tubes*
PK
Cat. No.
100
9.314 490
100
9.314 491
100
100
9.314 492
9.314 498
100
9.314 499
*RNase, DNase and pyrogen free
6 Micro pestles, PTFE, with stainless steel shaft
6
PTFE. With stainless steel shaft. For 1.5ml microcentrifuge tubes.
Overall length 143mm.
Type
Flat
Round
E & OE.
PK
Cat. No.
1
1
9.315 000
9.315 001
547
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Homogenisers
1 Micro pestles, CTFE/stainless steel
1
Reusable, for 500µl and 1.5ml microcentrifuge tubes. Autoclavable CTFE/stainless steel. Suitable for battery-operated
drive motor (9.314 496).
Capacity
ml
0.5
1.5
Length*
PK
Cat. No.
6
14
1
1
9.314 494
9.314 495
PK
Cat. No.
1
1
9.314 496
9.314 497
* Pestle length (cm)
2 Micro pestles, accessory drive motor
2
Type
Complete with two batteries
Spare pestle adapter
NEW!
3 BAGMIXER® Starter Pack
3
The starter pack has everything to start a microbiological analysis.
interscience
Supplied with: 1 BagMixer® 400 VW, 500 BagFilter®, 1000 BagLight®, 50 BagClip®, 1 BagOpen® and 1 BagRack®.
Type
PK
Cat. No.
1
9.570 015
BAGMIXER® Starter Pack
NEW!
Laboratory paddle blender BagMixer® 100 MiniMix®
MiniMix 100 paddle blenders, from the BagMixer range, guarantees a quick and accurate blending of small samples. Thanks to
the adjustable paddle system, blending is at its best. MiniMix® 100 is ideal for medical, veterinary and microbiological analysis.
®
Type
MiniMix® 100 P CC®
MiniMix® 100 W CC®
Capacity
ml
80-100
80-100
PK
1
1
4
5
6.240 509
548
interscience
®
6.241 090
E & OE.
Cat. No.
6.240 509
6.241 090
4
5
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Homogenisers
1 Laboratory mixer, BagMixer®
1
For sample preparation with easily adjustable paddle system. The BagMixer® is available
interscience
in 3 sizes and blends all sample types prior to their microbial analysis. Thanks to their
unique adjustable paddle system the blending chamber can be adjusted to the sample volume. Combined with the
variable speed, a higher bacterial recovery rate is achieved. All BagMixer® units are fitted with a timer. Constructed in
stainless steel. The fully opening door enables easy cleaning.
Click & clean® System (only BagMixer® 400 CC): removable and autoclavable paddles.
All units have a 3-year warranty and life guarantee for shock absorbers and window door.
Type
Capacity
ml
50 to 400
50 to 300
400 to 3500
BagMixer® 400 VW
BagMixer® 400 CC
JumboMix® 3500 VW
Length
mm
390
400
420
Width
mm
270
220
540
Height
mm
260
240
500
PK
Cat. No.
1
1
1
9.570 073
9.570 098
9.570 074
Scan 500 colony counter available on request!
2 3 Blender bags, BagSystem®
These highly resistant bags provide increased safety. The filter bags automatically filter the sample during the blending process,
withholding particles behind the filter.
interscience
The BagPage® has a full-width membrane filter.
The BagFilter® P is a non-woven lateral filter and it is sterile.
Type
Description
BagLight® 100
BagLight® 400
BagLight® 3500
BagFilter® 400 P
BagFilter® 3500 P
BagPage® 100
BagPage® Plus 400
BagPage® 3500
plain bag, sleeve 25
plain bag, sleeve 25
plain bag, sleeve 25
side filter bag, sleeve 25
side filter bag, sleeve 10
full-size filter bag, sleeve 25
full-size filter bag, sleeve 25
full-size filter bag, sleeve 10
Width
mm
110
175
380
190
380
180
190
380
Height
mm
185
300
510
300
510
95
300
510
PK
Cat. No.
500
1000
500
500
100
500
500
100
9.570 075
9.570 097
9.570 077
9.570 078
9.570 079
9.570 080
9.570 081
9.570 082
3
2
E & OE.
549
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Homogenisers
1 Accessories for blender BagSystem®
1
interscience
Type
Description
BagOpen® 80/100
BagOpen® 400
BagOpen® 3500
BagRack® 80/100
BagRack® 400
BagClip® 80/100
BagClip® 400
BagClip® 3500
BagPipet®
BagTips® Regular
BagTips® Jumbo
bag opener
bag opener
bag opener
bag storage for 11 bags
bag storage for 10 bags
bag closure clip
bag closure clip
bag closure clip
pipette with 3 fixed graduations: 0.1, 0.9, 1.0ml
straws for BagPipet®, 19cm, sterile
straws for BagPipet®, 24cm, sterile
PK
Cat. No.
1
1
1
1
1
50
50
50
1
1000
1000
9.570 083
9.570 084
9.570 085
9.570 086
9.570 087
9.570 088
9.570 089
9.570 090
9.570 091
9.570 092
9.570 093
Adhesive Labels - please see page 139
2
2 Sample bags, RollBag®
Sterile bags with seal reinforced with metal wire for BagMixer® lab blender and for
interscience
collecting samples in the food, dairy, water, sewage, medical, veterinary, environmental,
soil and industrial fields. By whirling, the RollBag® becomes a leakproof bag. RollBag® is also thick and robust in order to
resist bursting when handling a variety of samples.
Specifications
Capacity:
Blended volume:
Capacity:
Blended volume:
Capacity
ml
450
1300
3
450ml
5 to 50ml
1300ml
50 to 300ml
Dimensions
(D x W)
mm
110 x 230
175 x 290
PK
Cat. No.
1000
500
9.570 099
9.570 096
3 Gravimetric solvent diluter Gravimat®
The Gravimat® automatically dilutes a solid sample with the appropriate mass of solvent.
Stainless steel. Complete traceability, LIMS connection.
interscience
Comprises:
- Unit with 2 autoclavable dispenser tubes
- 5L autoclavable bottle
- BagOpen® sample bag holder
Accessories: Barcode reader, printer, booster kit (adds a double pump assembly and tubing to the unit, allowing liquid
to be dispensed at a higher flow rate).
Specifications
Balance:
Accuracy:
Dimensions (W x L x H):
Languages:
0.05 to 2500g
>99%
250 x 420 x 300mm
F, UK, D, E, IT, JAP, CHIN
Type
Gravimat®, single pump
Gravimat®, double pump
550
E & OE.
PK
Cat. No.
1
1
9.570 094
9.570 095
5. Sample preparation
www.haeberle-lab.de
Mixing, Homogenisation/Homogenisers
Gravimetric solvent diluter, BabyGravimat®, 1 or 2 pumps
All the Gravimat® technology in an all inox smaller unit: only 25cm wide. Ideal for
sample dilution in a laminar-flow cabinet.
1
interscience
Available with single or dual pump.
- Fast and accurate
- Compact and extra user-friendly
- RS232 output for LIMS or printer
Supplied with:
an inox dispensing arm, 1 or 2 pumps, BagOpen® 400, 2 dispensing assemblies per pump, one pack of each BagFilter®P
400, BagPage® Plus filter bags.
9.570 000
Specifications
Range:
Dilution Precision:
Dimensions (W x L x H):
Weight:
2
from 0.1 g to 1000g
>99%
250 x 350 x 160mm
8kg
Type
PK Cat. No.
BabyGravimat® single pump
BabyGravimat® double pump
1 9.570 000
1 9.570 001
1
2
9.570 001
E & OE.
551