SAMPLE PREPARATION EQUIPMENT AND ACCESSORIES

SAMPLE PREPARATION
EQUIPMENT AND ACCESSORIES
2
www.socachim.com
Introduction
Since 1994 SOCACHIM supplies quality equipment and consumables for the preparation of
samples destined for XRF, XRD, ICP & AA analysis.
We have a strong customer focus, with the key emphasis on ensuring that our customer obtains
optimum performance and value from their sample preparation equipment.
SOCACHIM enhances analytical results for users through providing technical and chemical
solutions as well as through systems and supplies. Our focus is on providing complete applications
that have a direct impact on performance for end users.
Proper Sample Preparation is vital for obtaining
accurate analytical results.
SOCACHIM products are used to measure the composition and purity of materials and are mainly
applied in industrial quality control and in process control for manufacturing processes in industries
such as metals and mining, construction materials, chemicals and petrochemicals.
Sample preparation and handling
SOCACHIM products are used in sample preparation and material handling:
q
q
q
q
q
q
q
q
Crushing and Milling
Blending and dividing
Particle sizing - wet and dry sieving
Fusion
Platinum and platinum alloy products.
Pressing and Pelletizing
Furnaces for Laboratory applications
Thermogravimetric Analyzer
149 av. du Capricorne
1200 Brussels/Belgium
Phone : +32 (0)2 762 77 12
Fax : +32 (0)2 762 55 07
E-mail : [email protected]
Website : www.socachim.com
Copyright © 2009 SOCACHIM -XRF Scientific
Printed in Belgium
3
Table of Contents
SOCACHIM SERVICES .................................................................................................................. 5
APPLICATIONS SUPPORT .................................................................................................................... 6
INSTALLATION, TRAINING & VALIDATION ........................................................................................... 6
PREVENTIVE MAINTENANCE & REPAIR .............................................................................................. 6
SPARES AND CONSUMABLE................................................................................................................ 6
CRUSHING & GRINDING THE SAMPLE........................................................................................ 7
LABORATORY CRUSHERS ................................................................................................................... 8
LABORATORY RING/DISC MILLS.......................................................................................................... 9
LABORATORY ROTATING SAMPLE DIVIDER......................................................................................10
MECHANISED & AUTOMATED SAMPLE PREPARATION SYSTEMS...................................................11
CROSS BEATER MILL...........................................................................................................................12
“Y” BLENDERS ......................................................................................................................................12
SIEVING THE SAMPLE ................................................................................................................ 13
SIEVING MACHINES .............................................................................................................................14
LABORATORY TEST SIEVES ...............................................................................................................15
SIEVING ACCESSORIES ......................................................................................................................16
SAMPLE PREPARATION BY FUSION ......................................................................................... 17
HIGH PURITY MOLTEN FLUXES ..........................................................................................................18
GAS FUSION MACHINES......................................................................................................................20
ELECTRICAL FUSION FURNACES.......................................................................................................23
PLATINUM LABWARE ................................................................................................................. 25
MATERIALS...........................................................................................................................................26
CRUCIBLES...........................................................................................................................................27
EVAPORATING DISHES .......................................................................................................................28
CRUCIBLES & BEAKERS......................................................................................................................29
FUSION LABWARE ...............................................................................................................................30
SPECIALITY PRODUCTS......................................................................................................................37
RESHAPERS FOR MOULDS & CRUCIBLES.........................................................................................38
MOULD & CRUCIBLE CLEANING HOLDERS (IN PTFE) .......................................................................38
POLISHING LATHE & KIT......................................................................................................................38
SAMPLE PREPARATION BY PRESS PELLETIZING................................................................... 39
HYDRAULIC PRESSES .........................................................................................................................40
PRESSING ACCESSORIES & ADDITIVES............................................................................................41
FURNACES FOR LABORATORY APPLICATIONS...................................................................... 43
SERIES FURNACES..............................................................................................................................44
LABORATORY MUFFLE FURNACES....................................................................................................45
LABORATORY FURNACES WITH SIC RODS .......................................................................................46
HIGH-TEMPERATURE FURNACES ......................................................................................................46
TUBE FURNACES .................................................................................................................................47
FURNACE OPTIONS & ACCESSORIES................................................................................................47
LABORATORY HEATING EQUIPMENT.................................................................................................48
GOLD ASSAYING ........................................................................................................................ 49
REFERENCE MATERIALS CERTIFIED FOR PT, PD, AU......................................................................50
FIRE ASSAY-CUPELLATION.................................................................................................................50
CUPELS FOR GOLD ASSAY.................................................................................................................50
TGA ANALYZERS ........................................................................................................................ 52
THERMOGRAVIMETRIC ANALYZER ....................................................................................................53
MODELS OF TGA AVAILABLE ..............................................................................................................56
4
www.socachim.com
SOCACHIM SERVICES
We are committed to providing you with the best available support.
ADVI CE ON APP LI CATIONS AND USE S
INS TALLATION, CALI BRATION AND TRAINI NG
INS PE CTION, M AINTENANCE AND REP AIR
CONSUL TING SERV ICE S
5
SOCACHIM is committed to assisting you in achieving excellent
analytical results and, like you, we recognise, that excellent results
start with an uncompromising approach to sample preparation.
APPLICATIONS SUPPORT
We have an Application Laboratory that works with you using your
materials to establish the best approach to sample preparation, or we
can visit you in your laboratory to assist in optimising your procedures.
-
Development of methods
Improvement of your sample preparation performance
with new chemicals or sample preparation equipment.
On-site training
On-site calibration assistance
INSTALLATION, TRAINING & VALIDATION
When you buy a machine/instrument from SOCACHIM we take
charge of the full installation to ensure that your machine is set up to
manufacturer’s specifications, and configured to your user-specific
applications.
During installation we also take the time to explain the new
operator(s) all the relevant aspects of instrument operation, safety
procedures, and also how to maintain operating conditions for
accurate results and trouble-free performance.
Finally we finish the installation by the validation of method(s) using
your samples, and complete by carrying out repeatability tests.
PREVENTIVE MAINTENANCE & REPAIR
SOCACHIM offers you several maintenance options to ensure your
instrument/machine is in prime operating condition.
Contract type 1: Scheduled Preventive Maintenance + hotline +
email assistance
Contract type 2: Type 1 + Emergency visit
Contract type 3: Type 2 + Unlimited Emergency visit + Loan of a
replacement machine in case of long period of break down.
SPARES AND CONSUMABLE
SOCACHIM keeps in stocks an extensive range of spare parts and
accessories for all their machines.
For fusion fluxes and other chemicals, SOCACHIM also maintains
large amount of product in stock for rapid deliveries. The company
also has a special program to allow their customer to choose multidrop shipments on a global basis.
6
www.socachim.com
CRUSHING & GRINDING
THE SAMPLE
LABORATORY CRUSHERS
LABORATORY RING/DIS C M IL LS
LABORATORY ROTATING SAM PLE DI VI DER
M ECHANIS ED & AUTOM ATED SAM PLE
PREPARATION SYSTEMS
7
LABORATORY CRUSHERS
BOYD CRUSHER
The Boyd Crusher is the worlds first double acting, fine jaw
crusher. Its patended design includes two moving jaws. One jaw is
top driven, one jaw is bottom driven to crush many times before
the material falls from the bottom of the jaws.
Fine Crushing : The Boyd Crusher is believed to be the only jaw
crusher in the world with a 25 times size reduction in one pass.
Up to 55 mm pieces can be crushed to 2 mm or less in one
operation.
§
Initial size: < 55 mm
§
Final fineness: < 2 mm or even finer
Two
moving jaws
Technical specifications:
Motor power (3 phase): 5,5 kW.
Dimensions: 1050mm(D) x 670mm(W) x 1000mm(H)
Weight: 500kg
BIG BOYD PRIMARY CRUSHER
The Big Boyd Primary Crusher is a scale up version of the very
successful Boyd Crusher. It has been designed and built for a
long, trouble free life. It can accept a lump size up to 150 mm
and crush that down to 95% passing 10 mm or even finer,
depending on the sample type.
§
Initial size: < 150 mm
§
Final fineness: 95% < 10 mm or even finer
Two
moving jaws
Technical specifications:
Motor power (3 phase): 11 kW.
Dimensions: 2000mm(D) x 1850mm(W) x 1970mm(H)
Weight: 1650kg
IMPACT MORTAR
The impact mortar and pestle is a simple device designed to
crush and pulverize many type of sample materials in
preparation for further treatment.
By raising and lowering the pestle, the contained sample is
mechanically crushed.
Technical specifications:
Stainless and hardened chrome steel;
3
Sample capacity: 70 cm
Dimensions: 190mm(H) x 90mm(Diameter)
Weight: 4kg
8
www.socachim.com
LABORATORY RING/DISC MILLS
BENCH TOP RING MILL
Used for pulverising rocks, soil, coal, cement, glass, limestone,
bricks, wood, plant material, slags, concrete, etc. for XRF, XRD or
other instrumental methods or wet chemistry.
§
Initial size: < 10 mm
§
Final fineness: < 75 µm or even finer
Whisper Series Bench Top Ring Mills have been developed for
laboratories pulverising 1 to 100 gram samples.
§
Small and compact to fit on a work bench
§
Noise level less than 80 dBa
Head Options: A wide range of sample containers (heads) are
available for samples from 1 to 100 grams. These are made from
carbon steel, chrome steel, tungsten carbide and zirconia.
Technical specifications:
Motor power (1 or 3 phase): 0.18 kW.
Dimensions: 420mm(D) x 420mm(W) x 500mm(H)
Weight: 58kg
STANDARD RING MILL
The Standard Ring Mill (Whisper Series) comes complete with
powder coated metal cabinet, soundproofing, timer starter and safety
“cut out” switch. There are two options of clamps available:
Pneumatic clamp and the Rotoclamp
Used for pulverising rocks, soil, coal, cement, glass, limestone,
bricks, wood, plant material, slags, concrete, etc. for subsequent
analysis by instrumental methods or wet chemistry.
§
Initial size: < 10 mm
§
Final fineness: < 75 µm or even finer
Head Options: A wide range of sample containers (heads) are
available for samples from 1 to 1000 grams. These are made from
agate, carbon steel, chrome steel, tungsten carbide, sialon and
zirconia.
Technical specifications:
Motor power (1 or 3 phase): 1.1 kW.
Dimensions: 600mm(D) x 600mm(W) x 1170mm(H)
Weight: 210kg
Please contact us for further information
and advice in choosing the appropriate
Head for your Ring Mill.
9
CONTINUOUS FLOW RING MILL
The Continuous Ring Mill (CRM ) is suitable for:
§
Pulverising large samples from 1 kg to 1 tonne
§
Coarse pulverising of large samples for mineral separation e.g
zircon dating
§
Preparing samples for on-steam analysis, dry or slurries.
The standard CRM is available in 2 configurations.
§
CRM with sample pot - Options of single-tier and double-tier
head are available
§
CRM with Rotating Sample Divider (RSD) - Options of singletier and double-tier head are available
Technical specifications:
Motor power (3 phase): 1.1 kW.
Dimensions: 816mm(D) x 929mm(W) x 1499mm(H)
LABORATORY ROTATING SAMPLE DIVIDER
BENCH TOP RSD
§
§
§
§
A representative split of any proportion from 2 -50%
2 models available
o Model A: 2 splits - sample and remainder
o Model B: 3 splits – two sample splits and remainder
Feed rate 0 -5 kg /minute
Small enough to be placed on a work bench
Technical specifications:
Dimensions: 600mm(L) x 420mm(W) x 550mm(H)
Weight: 80kg
STAND ALONE RSD
§
§
§
§
§
§
It takes a single representative split of any proportion from 0 –
50% from any size of sample, up to 25kg
Duplicate split option available – 2 sample spilts and remainder
Feed rate: 0 – 15kg per minute
Feed size: less than 10mm recommended
Stainless steel hopper with 25kg capacity
Vibratory Feeder control
Technical specifications:
400V – 50Hz – 3 phase
Dimensions: 760mm(D) x 800mm(W) x 1080mm(H)
Weight: 150kg
w ww . s o c a c h i m . c o m
10
MECHANISED & AUTOMATED SAMPLE
PREPARATION SYSTEMS
SMART GEO-PREP
When using Smart Geo-Prep the operator chooses an
optimum weight for the split that will be produced. For
example, when using a ring or puck mill, there is an optimum
amount for pulverising, not too high a weight so the sample
is pulverised fully, not too small a weight so the pulverised
sample is representative of the original material.
The operator weighs each sample (this can be recorded in a
LIM System) and loads it into the Boyd Crusher. The sample
material falls into a small belt conveyor that takes it to the
RSD.
The speed of the belt is controlled by a PLC so that small
samples travel slowly, to ensure a high quality split through the
RSD. The RSD is controlled by the PLC to provide the pre-set
weigh plus the remainder.
MECHANISED SYSTEM
A Mechanised System is a combination of two or more
machines and devices so that a process of sample preparation
can be carried out without any operator action.
§
Two or more machines combined to form a mechanised
system for the preparation of the samples.
§
Operator handling is minimized, even for very large
samples.
§
Ideal for labs or mills processing up to 350 samples per
day.
AUTOMATED SYSTEM
Automated Systems are based on the concept of a sample
flowing through a process, not a series of batch events. The
concept has been developed over the last fifteen years. Many
new machines and devices have been invented by ROCKLABS
Ltd to facilitate this concept.
The overall aim is simplicity of design and construction to
minimise construction costs and running costs and enable the
system to be operated by existing laboratory technicians and
maintained by existing plant fitters.
11
CROSS BEATER MILL
HAMMER-CUTTER MILL - 0100
The hammer mill is used to mill fragile, soft and crystallized products.
It is made in stainless steel (AISI 304 or AISI 316, depending on the
order) and its surface is rilsanized and polished.
The grinding mill is designed to work with different interchangeable
filters with circular perforations (diameters 2, 3, 4 and 5 mm).
Technical specifications:
Electrical: 240 VAC 50/60 Hz ; 0.7 kW; 3000 rpm
Dimensions: 250mm(W) x 470mm(D) x 465mm(H) - Weight: 15kg.
HAMMER-CUTTER MILL - 2000
The Hammer mill –2000 made of AISI 316, has been designed for
grinding solid product like cereals, plastics, resins, minerals,
vegetables, etc. with results up to 50µm.
The drum is made of stainless steel AISI 316 with thermal treatment in
order to get maximum hardness.
The casing box is made in dull-finish white.
The mill has been designed for working with different types of sieves
with round perforation (diameters 2, 3, 4 and 5 mm).
Includes 3 knives in stainless steel long term duration and easy to
change.
In order to get a better test results the handling is done through a
frequency variator.
Technical specifications:
Electrical: 240 VAC 50/60 Hz ; 0.75 kW; 3000 rpm
Dimensions: 350mm(W) x 650mm(D) x 475mm(H) - Weight: 30kg.
“Y” BLENDERS
LABORATORY “Y” BLENDERS
The laboratory “Y” mixers are used to homogenize and mix dusty
products. They have two inlets with silicone lids and one outlet for the
resulting product. The optimal capacity to homogenize is 50% of the
total volume mixer.
The body is made of st. steel AISI 304 with a polished mirror in both
internal and external sides. It also can be manufactured in AISI 316.
It works with a single-phase motor and has a timer to control the mix
time.
4 models available: 1, 2 , 4 and 8 litres capacity
Technical specifications:
Power:230Volt - 50/60Hz – 0.12CV (0.25CV for FTLMV-0008)
w ww . s o c a c h i m . c o m
12
SIEVING THE SAMPLE
LABORATORY TEST SIEVES
SIEVING MACHINES
SIEVING ACCESSORIES
13
SIEVING MACHINES
DIGITAL ELECTROMAGNETIC SIEVE SHAKERS
The sieve shakers FTL series are used for particle test separation.
Measuring range begin with 0,040 mm. They have a polyurethane resin
framework with an electronic power control provided of intermittence
and operation time systems.
The sieve shaker transmits a three-dimensional movement to the
sieves to obtain a optimum particle separation.
It allows 8 sieves with 50 mm useful height or 16 sieves with 25 mm
useful height.
FTL-0150: for sieves Ø100 and Ø150 mm.
FTL-0200: for sieves Ø200 and Ø203 mm.
Technical specifications:
Electrical: 240 VAC 50/60 Hz ; 0.4 kW .
Dimensions: 360mm(bottom Ø) x 790mm(max. H) - Weight: 40kg
DIGITAL ELECTROMAGNETIC WET SIEVE SHAKERS
The digital electromagnetic wet sieve shaker FTLVH series are used for
particle test separation. Measuring range begins with 0,020 mm in a
liquid environment. The sieve shakers have a polyurethane resin
framework in a operating box apart from the machine. They have also
an electronic power control provided of intermittence and operation time
systems.
The sieve shaker transmits a three-dimensional movement to the
sieves to obtain a optimum particle separation.
It allows 8 sieves with 50 mm useful height or 16 sieves with 25 mm
useful height.
FTLVH-0150: for sieves Ø100 and Ø150 mm.
FTLVH-0200: for sieves Ø200 and Ø203 mm.
Technical specifications:
Electrical: 240 VAC 50/60 Hz ; 0.4 kW .
Dimensions: 360mm(bottom Ø) x 790mm(max. H) - Weight: 40kg
AIR JET SIEVING MACHINE
The air jet sieving machines are used for particle test separation.
Measuring range is included between 0.005 and 0.040 mm.
The machines have a polyurethane resin framework with an
electronic power control provided of an operation time system and a
vacuum indicator. The sieve are special and have a rubber joint.
The air jet sieving machine can be sold with the vacuum cleaner
NILFISK GM 80. It is the most indicated machine to air jet sieving
tests and it is able to create the decrease of pressure needed for the
tests (since 20kPa).
Technical specifications:
Electrical: 240 VAC 50/60 Hz ; 0.019kW.
Dimensions: 360mm (bottom Ø) x 275mm(H) - Weight: 20kg
w ww . s o c a c h i m . c o m
14
LABORATORY TEST SIEVES
METALLIC MESH
Laboratory mesh sieves from Ø60 to Ø600 mm made in stainless steel (AISI 304).
The metallic meshes are made in AISI 316 stainless steel according to the
standards UNE 7050-3, ISO 3310-1, ASTM E11 and ISO 9044. The identification
mark is labelled on each test sieve by laser. Certificate of compliance according to
norm 10204 is enclosed for each test sieve, as well as a maintenance
documentation.
We provide stainless steel (AISI 304) receivers and lids that are compatible with
all the sieves. As an option, you can also add 2 handles for all the sieves.
PERFORATED PLATE
Perforate plate laboratory sieves from Ø200 to Ø450 mm made in stainless steel (AISI 304). The metallic
meshes are made in AISI 316 stainless steel according to the standards UNE 7050-4, ISO 3310-2, ASTM E323.
The identification mark is labelled on each test sieve by laser. Certificate of compliance according to norm 10204
is enclosed for each test sieve, as well as a maintenance documentation.
We provide stainless steel (AISI 304) receivers and lids that are compatible with all the sieves. As an option, you
can also add 2 handles for all the sieves.
Square perforate
Round perforate
Grooved perforate(cereal test)
NYLON MESH
Nylon mesh test sieves glued on the frame made of stainless steel AISI 304. The
identification mark is labelled on each test sieve by laser. For each test sieve is
issued a certificate of compliance, as well as maintenance documentation.
SIEVE WITH BARS
Painted steel sieves with bars 300 x 300 (Standards EN 933-1)
15
SIEVING ACCESSORIES
FAST CLAMBING SYSTEM
Fast clambing system system for laboratory sieve shakers models FTL and
FTLVH.
This clambing system consists of two stainless steel smooth rods and two
mechanized parts (with carbon steel and bluing). Ensure that sieves are held firmly
and enable them to be quickly released from column of 8 sieves to a column of 1
sieve in few seconds.
SIEVE COVER & COLLECTING PAN
We provide stainless steel (AISI 304) receivers and lids that are compatible with all
the sieves. As an option, you can also add 2 handles for all the sieves.
WET SIEVING ACCESSORIES
Methacrylate sieve cover with spray diffuser.
St. steel AISI 316 tube of ½”, rubber joint and nuts.
St. steel collecting pan with an outlet and rubber connection.
VACUUM CLEANER
Nilfisk industrial vacuum cleaner for air jet sieving machine.
ULTRASONIC BATH
Ultrasonic bath is the perfect complement for the maintenance and cleaning of the
sieves, glass articles and other laboratory accessories.
Made of stainless steel AISI 304 - Capacity of 9 and 12 litres.
Equipped with a heating thermostat (0-90°C), timer, outlet and two power levels.
w ww . s o c a c h i m . c o m
16
SAMPLE PREPARATION
BY FUSION
HIGH P URITY M OLTEN F LUXES
FUSION ADDITIVES
GAS FUSI ON M ACHINE S
ELECTRICAL FUS ION F URNACES
17
HIGH PURITY MOLTEN FLUXES
§
§
§
§
§
§
§
§
§
§
§
Fused, white vitreous powder (particles)
Perfect homogeneity
Non dusty
Free flowing
Controlled particle size distribution
High density: 1,2—1,4g/cm3
Low loss of ignition: < 0,05% typical
Highly pure qualities: > 99,98%
Analytical guarantee
All batches are similar (no need to re-calibrate the instrument)
Reserved production batches
RANGE OF FLUXES FOR XRF, ICP, AA'S ANALYSIS
A complete range of pre-fused fluxes ranging from 100% lithium tetraborate to 100% lithium metaborate in any
combination.
Any release or non wetting agents, oxidising agent or heavy absorbers or other speciality chemicals in any
specific percentage can be incorporated into our fluxes.
FLUX NAME
Description
Melting P. (°C) Quantity
F L U X ST 1 0 0
Sodium Tetraborate
740°
FLUX LT100
Lithium Tetraborate
920°
FLUX LM100
Lithium Metaborate
845°
FLUX LT80:LM20
80% Lithium Tetraborate/20% Lithium Metaborate
900°
1 or 2 kg
1 or 2 kg
FLUX LT70:LM30
70% Lithium Tetraborate/30% Lithium Metaborate
890°
1 or 2 kg
FLUX LT66:LM34
66% Lithium Tetraborate/34% Lithium Metaborate
875°
1 or 2 kg
FLUX LT50:LM50
50% Lithium Tetraborate/50% Lithium Metaborate
870°
1 or 2 kg
F L U X L T 3 5 : L M 6 5 ( 1 2 : 2 2 ) 35,3% Lithium Tetraborate/64,7% Lithium Metaborate. 845°
1 or 2 kg
FLUX LT20:LM80
20% Lithium Tetraborate/80% Lithium Metaborate
840°
1 or 2 kg
FLUX LT85:LA15
85% Lithium Tetraborate/15% Lanthanum oxide
900°
1 or 2 kg
FLUX LT100+15SN
85% Lithium Tetraborate/15% Sodium nitrate
-
0.5 or 1 kg
F L U X L T1 0 0 + 5 L N
95% Lithium Tetraborate/5% Lithium nitrate
-
0.5 or 1 kg
F L U X L T1 0 0 + 1 0 L i C
90% Lithium Tetraborate/10% Lithium Carbonate
-
1 or 2 kg
FLUX LT100+02LiBr
99,8% Lithium Tetraborate/0,2% Lithium Bromide
920°
1 or 2 kg
FL UX L T6 6 : L M3 4 +0 2 L i Br 99,8% Flux LT66:LM34/0,2% Lithium Bromide
875°
1 or 2 kg
F L U X L T1 0 0 + 1 0 L i F
90% Lithium Tetraborate/10% Lithium Fluoride
-
1 or 2 kg
FL UX L T6 6 : L M3 4 +1 0 L i F
90% Flux LT66:LM34/10% Lithium Fluoride
-
1 or 2 kg
FLUX Ni +
Thulium doped flux for High Accuracy Nickel Analysis -
0.5 or 1 kg
FLUX Fe+
Terbium doped flux for High Accuracy Fer Analysis
0.5 or 1 kg
-
1 or 2 kg
1 or 2 kg
CUSTOM BLENDS
We manufacture the fluxes as per your requirement.
Just give us the ratio LT/LM and the quantity of NWA or/and oxydizer
w ww . s o c a c h i m . c o m
18
FUSION ADDITIVES: TO IMPROVE THE FUSION
One of the advantages of the fusion is the possibility to add on a homogeneous way some additives. These
additives are helpful for the analyst. These additives could be oxidiser, non-wetting agent, internal standard, and
heavy absorbers.
Oxidising Agent
Description
Melting P. (°C)
Quantity
LiNO3
NaNO3
Lithium nitrate, crystal powder
Sodium nitrate, crystal powder
264
308
250 g
250 g
Sr(NO3)2
KNO3
Strontium nitrate, crystal powder
Potassium nitrate, crystal powder
570
334
250 g
250 g
KIO3
Potassium iodate, crystal powder
334
250 g
FerroOX1
Oxidizer for ferro-alloys
-
250 g
FerroOX2
Oxidizer for ferro-alloys
-
250 g
SiCOX
Oxidizer for silicon carbide refractories
-
250 g
Melting P. (°C)
Quantity
-
100 or 250 g
15 ml dropper bottle
Non Wetting Agent
Description
(NWA)
LiBr
Lithium bromide, crystal powder
LiBr
Lithium bromide, solutions (250g/l)
LiI
Lithium iodide, crystal powder
Ammonium Iodide, Tablets (21.4mg 66.6% NH4I)
NH4I
100 or 250 g
551 subl.
1500 tablets/bottle
Melting P. (°C)
Quantity
Other Chemicals
Description
LiF
Lithium fluoride, vitreous powder
845
500 g
Li2CO3
Lithium carbonate, powder
723
1 kg
Na2CO3
Sodium carbonate, powder
720
1 kg
SOCACHIM maintains large amount of product in stock for rapid deliveries.
The company has also a special program to allow their customer to choose multi-drop
shipments on a global basis.
For more information please call: +32 (0)2 762 77 12
19
GAS FUSION MACHINES
PHOENIX S
Fused glass disks for XRF analysis
§
§
§
§
§
§
§
§
§
§
Single station
Compact &
Economical
Fully Automatic & reproducible sample preparation
Extremely compact design: single station
Up to 80 user-customizable fusion programs
USB connection to computer
High speed bead/solution production
Individual burners for crucible and mould
Precise temperature regulation
Superior homogenization: eccentric rotation - vortex
Rugged & durable
Perfect control of the cooling process
Technical specifications:
Electrical: 110 or 240 VAC 50/60 Hz ; 120 Watts .
Dimensions: 350mm(L) x 290mm(D) x 200mm(H) - Weight: 15kg
Gas : propane/LPG :30mbar or alternative natural gaz:50mbar; Air:
4bar, Oxygen: 3bar
PHOENIX R
Fused glass disks for XRF analysis
§
§
§
§
§
§
§
§
§
§
3 stations
Fully Automatic & reproducible sample preparation
Compact design
Up to 80 user-customizable fusion programs
USB connection to computer
High speed bead/solution production
Individual burners for crucibles and moulds
Precise temperature regulation
Superior homogenization: eccentric rotation - vortex
Rugged & durable
Perfect control of the cooling process
Technical specifications:
Electrical: 110 or 240 VAC 50/60 Hz ; 720 Watts .
Dimensions: 620mm(L) x 450mm(D) x 250mm(H) - Weight: 50kg
Gas : propane/LPG :30mbar or alternative natural gaz:50mbar; Air:
5bar, Oxygen: 4bar
PHOENIX VFD
Fused glass disks for XRF analysis
6 stations
Totally repeatable
fusion conditions
§
§
§
§
§
§
§
§
§
§
Fully Automatic & reproducible sample preparation
High productivity
Up to 80 user-customizable fusion programs
USB connection to computer
High speed bead/solution production
Individual burners for crucibles and moulds
Precise temperature regulation
Superior homogenization: eccentric rotation - vortex
Rugged & durable
Perfect control of the cooling process
Technical specifications:
Electrical: 110 or 240 VAC 50/60 Hz ; 720 Watts .
Dimensions: 880mm(L) x 630mm(D) x 310mm(H) - Weight: 90kg
Gas : propane/LPG :30mbar or alternative natural gaz:80mbar; Air:
5bar, Oxygen: 4bar
w ww . s o c a c h i m . c o m
20
PHOENIX D
Acid solutions for analysis by AA or ICP
4 stations
§
§
§
§
§
§
§
§
Fully Automatic & reproducible sample preparation
High productivity
Up to 80 user-customizable fusion programs
USB connection to computer
High speed solution production
Precise temperature regulation
Superior homogenization: eccentric rotation - vortex
Rugged & durable
Technical specifications:
Electrical: 110 or 240 VAC 50/60 Hz ; 720 Watts .
Dimensions: 880mm(L) x 630mm(D) x 310mm(H) - Weight: 90kg
Gas : propane/LPG :30mbar or alternative natural gaz:80mbar; Air: 5bar,
Oxygen: 4bar
PHOENIX I
Peroxides, carbonates or persulfates fusion
Acid solutions for analysis by AA or ICP
12 stations
§
§
§
§
§
§
§
§
§
Fully Automatic & reproducible sample preparation
High productivity
Up to 80 user-customizable fusion programs
USB connection to computer
High speed solution production
Precise temperature regulation
Superior homogenization: eccentric rotation - vortex
Rugged & durable
Perfect control of the cooling process
Technical specifications:
Electrical: 110 or 240 VAC 50/60 Hz ; 720 Watts .
Dimensions: 880mm(L) x 630mm(D) x 310mm(H) - Weight: 90kg
Gas : propane/LPG :30mbar or alternative natural gaz:80mbar; Air: 5bar,
Oxygen: 4bar
PHOENIX LOI
Loss of ignition (LOI) or other fusion applications
6 stations
§
§
§
§
§
§
§
§
Fully Automatic & reproducible sample preparation
High productivity
Up to 80 user-customizable fusion programs
USB connection to computer
High speed solution production
Precise temperature regulation
Rugged & durable
Perfect control of the cooling process
Technical specifications:
Electrical: 110 or 240 VAC 50/60 Hz ; 720 Watts .
Dimensions: 880mm(L) x 630mm(D) x 310mm(H) - Weight: 90kg
Gas : propane/LPG :30mbar or alternative natural gaz:80mbar; Air: 5bar,
Oxygen: 4bar
21
PHOENIX LABWARE
CRUCIBLES
The Phoenix crucibles are manufactured of 95%Pt 5%Au alloy which is nonwetting and resists sample adhesion to the interior ; they are available in two sizes for XRF sample
preparation procedures.
•
•
•
•
•
•
•
Standard Size, 36mm high; 40g
Tall Size, 43mm high; 40g
ICP Crucible, 18mm high; 15g
ICP Crucible, 45mm high; 50g
Zirconium crucible, 30mm high (option: Lid)
Zirconium crucible, 40mm high (option: Lid)
LOI crucible. 90%Pt/10%Rh ; 70g with lid
………………….…
………………….…
………………….…
………………….…
………………….…
………………….…
………………….…
Cat. No. AC1
Cat. No. AC2
Cat. No. AC10
Cat. No. AC11
Cat. No. PXC1-Zr
Cat. No. PXC2-Zr
Cat. No. AC8
Other sizes available, please check our catalogue page28,29 or consult our website: www.socachim.com
MOULDS Corresponding to the diameter of the fused bead, different size and weight of moulds
are available. They are also fabricated from 95% Pt/5% Au.
•
•
•
•
•
•
29/31mm
30/32mm
30/32mm
33/35mm
39/41mm
39/41mm
Ø beads, 42mm
Ø beads, 42mm
Ø beads, 46mm
Ø beads, 46mm
Ø beads, 52mm
Ø beads, 56mm
flange; from
flange; from
flange; from
flange; from
flange; from
flange; from
30 up to 100g
30 up to 100g
40 up to 100g
40 up to 100g
40 up to 100g
50 up to 100g
………………
………………
………………
………………
………………
………………
Cat. No. AM1
Cat. No. AM2
Cat. No. AM4
Cat. No. AM6
Cat. No. AM7
Cat. No. AM8
Other sizes available, please check our catalogue page28,29 or consult our website: www.socachim.com
w ww . s o c a c h i m . c o m
22
ELECTRICAL FUSION FURNACES
SC142BMP BEADMAKING
Fused glass disks for XRF analysis
§
§
§
§
§
§
6 stations fusion furnace
§
§
§
§
§
PLC touch-screen controller
Electric heating with all solid state controls
Exceptional reliability and full factory service support
Reproducible sample preparation
High productivity: allows fusing new samples while
precedent beads are cooling
PLC touch-screen controller : Up to 7 customizable
programs
Audible alarm sounds whenever operator action is
required
Precise temperature control (up to 1250°C)
Variable rate mixing
Variable speed fan cooling(compressed air cooling
available)
Over temperature protection
Rugged & durable, low maintenance and repair costs
Technical specifications:
Electrical: 380-415Volt, 50/60Hz, three phase, 6kW
Dimensions: 1100mm(L) x 500mm(D) x 475mm(H) - Weight: 95kg
SC32A ELECTRIC 2 POSITIONS FURNACE
Fused glass disks for XRF analysis
Loss of ignition (LOI) or other fusion applications
§
§
§
§
§
§
§
2 stations fusion furnace
Compact unit
Electric heating with all solid state controls
Exceptional reliability and full factory service support
Reproducible sample preparation
Precise temperature control (up to 1200°C)
Fast heating (this furnace can be at 1050°C within 15
minutes)
Rugged & durable
Technical specifications:
Electrical: 230Volt - 50/60Hz – 4.8kW
Dimensions: 530mm(L) x 450mm(D) x 350mm(H) - Weight: 30kg
23
BEADMAKING LABWARE
CRUCIBLES
The crucibles are manufactured of 95% Pt/5% Au alloy which is nonwetting and resists sample adhesion to the interior ; they are available in two sizes for XRF
sample preparation procedures.
•
•
………………….… Cat. No. BC4
………………….… Cat. No. BC3
Standard Size, 35mm high; 35g
Tall Size, 40mm high; 35g
Other sizes available, please check our catalogue page33 or consult our website: www.socachim.com
MOULDS Corresponding to the diameter of the fused bead, different size and weight of
moulds are available. They are also fabricated from 95% Pt/5% Au.
•
•
•
•
•
•
29/31mm
30/32mm
30/32mm
33/35mm
39/41mm
39/41mm
Ø beads, 42mm
Ø beads, 42mm
Ø beads, 46mm
Ø beads, 46mm
Ø beads, 52mm
Ø beads, 56mm
flange; from
flange; from
flange; from
flange; from
flange; from
flange; from
30 up to 100g
30 up to 100g
40 up to 100g
40 up to 100g
40 up to 100g
50 up to 100g
………………
………………
………………
………………
………………
………………
Cat. No. AM1
Cat. No. AM2
Cat. No. AM4
Cat. No. AM6
Cat. No. AM7
Cat. No. AM8
Other sizes available, please check our catalogue page33,34 or consult our website: www.socachim.com
SOCACHIMSERVICES
Installation & Validation > Calibration > Training > Preventive Maintenance > Repair>…
For more information please call: +32 (0)2 762 77 12
w ww . s o c a c h i m . c o m
24
PLATINUM LABWARE
CRUCIBL ES
EVAPORATING DISHES
BEAKERS
FUSION L ABW ARE
SP ECI ALI TY PRODUCTS
RES HAPE RS FOR M OULDS & CRUCIBL ES
POLISHING LATHE & KIT
25
MATERIALS
The analytical laboratory is a vital part of all industrial plants and research establishments. The
techniques employed therein have developed rapidly in recent years, but the fundamentals upon
which many of these techniques are based have remained constant. The majority demand the use of
high-purity inert materials. In this category platinum (Pt) has properties that make it an ideal choice. It
has a high degree of chemical inertness and yet can be readily fabricated into a wide variety of
articles. These, in turn, are used in a wide range of applications:
Wet Chemistry:
Eg. ISO 9502:1993
Metallurgical-grade fluorspar - Determination of silica content - Reduced-molybdosilicate
spectrometric method.
Loss related analyses:
Eg. AS 3572.3-2002
Plastics - Glass filament reinforced plastics (GRP) - Methods of test Determination of loss on ignition of glass filament reinforced plastics.
Lithium borate fusions for XRF, AAS, ICP-AES or ICP-MS analysis:
Eg. ISO 9516:1992
Iron ores - Determination of silicon, calcium, manganese, aluminium, titanium, magnesium,
phosphorus, sulphur and potassium - Wavelength dispersive X-ray fluorescence spectrometric
method.
Metals used for laboratory apparatus must have the following
properties:
§
§
§
§
§
High temperature strength
High melting point
Ductility
Corrosion resistance
Oxidation resistance
Platinum and its alloys possess these qualities and is therefore the
most widely used metal for analytical laboratory apparatus.
COMPARISON OF PROPERTIES
3
Density gcm
Melting Point °C
Electral Resistivity (0°C) µOhmcm
Temp Coeff of Resistance (0-100°C) °C-1
Annealed Hardness Hv
Ultimate Tensile Strength (20°C)Nmm -2
Tensile Elongation (20°C) %
Glass Wetting Resistance (Equilibrium Contact
Angle of "E" Glass at 1200°C)
Pt
Pt-10Rh
Pt-3Rh
Pt-5Au
21,45
1770
9,85
0,0039
40
125
40
19,99
1850
18,40
0,0017
90
300
35
20.96
1789
15.63
57
210
34
21,33
1660
18,50
0,0021
90
345
24
26
45
-
83
Metal Exchange
SOCACHIM offers its clients a metal exchange procedure which is designed to help
customers replace damaged or worn platinum ware with a minimum of inconvenience.
For more information please call: +32 (0)2 762 77 12
w ww . s o c a c h i m . c o m
26
CRUCIBLES
STANDARD FORM CRUCIBLE
Available Capacity: 2.5 -700cc (larger sizes made to order)
Options: Lids, reinforced rims and/or bases, pouring lip
ESTIMATED WEIGHT (g)
CODE
CAPACITY DIAMETER
NUMBER
ml
mm
GCS2.5
GCS5
GCS8
GCS10
GCS15
GCS20
GCS25
GCS30
GCS35
GCS40
GCS50
GCS60
GCS70
GCS80
GCS90
GCS100
GCS150
GCS200
GCS250
GCS700
2.5
5
8
10
15
20
25
30
35
40
50
60
70
80
90
100
150
200
250
700
12
20
25
25
30
33
36
40
41
42
45
45
49
51
54
56
65
80
81
105
DEPTH
mm
STANDARD
FORM
15
22
24
28
31
34
35
36
38
42
44
47
53
53
57
57
69
65
73
105
3
4
6
7
11
15
19
22
25
30
38
46
50
51
52
59
100
150
175
300
REINFORCED
RIM BASE
ONLY ONLY
4
5
7
7.5
12
16
20
24
26
32
40
48
52
54
59
68
104
159
179
305
4
5
7
8
13
17
21
26
27
34
42
50
54
63
71
73
107
165
183
315
RIM &
BASE
5
6
8
9
14
18
23
27
32
36
45
54
63
72
81
90
114
180
190
320
STANDARD
LID ONLY
1.5
1.5
1.5
2
3
4
4
6
6
7
8
9
12
14
15
17
27
30
32
50
LOW PROFILE FORM CRUCIBLE
Available Capacity: 8-125cc (larger sizes made to order)
Options: Lids, reinforced rims and/or bases, pouring lip
ESTIMATED WEIGHT (g)
CODE
CAPACITY
NUMBER
ml
GCL8
GCL10
GCL15
GCL20
GCL25
GCL30
GCL35
GCL40
GCL50
GCL60
GCL70
GCL75
GCL80
GCL90
GCL120
GCL125
8
10
15
20
25
30
35
40
50
60
70
75
80
90
120
125
DIAMETER
mm
25
27
30
33
36
40
42
43
46
48
52
52
52
57
57
58
DEPTH STANDARD
mm
FORM
21
23
27
28
30
32
33
34
37
39
41
44
47
48
57
59
6
7
11
15
19
22
25
30
38
46
50
50
51
52
84
97
REINFORCED
RIM
ONLY
BASE
ONLY
RIM &
BASE
7
7.5
12
16
20
14
26
32
40
48
52
53
54
59
88
101
7
8
13
17
21
26
27
34
42
50
54
58
63
71
90
105
8
9
14
18
23
27
32
36
45
54
63
67
72
81
98
114
STANDARD
LID ONLY
1.5
2
3
4
4
6
6
7
8
9
12
13
14
15
22
25
27
EVAPORATING DISHES
Evaporating dishes may be ordered also with reinforced rim and heavy base. The additional cost for
reinforcement is far outweighed by longer life and ease of handling. If covers are required, please
specify.
FLAT BOTTOM DISH
ESTIMATED WEIGHT (g)
CODE
CAPACITY DIAMETER DEPTH STANDARD
NUMBER
ml
mm
mm
FORM
GD20
GD25
GD35
GD40
GD50
GD60
GD75
GD100
GD125
GD150
GD175
GD200
GD250
GD300
GD400
GD500
GD750
20
25
35
40
50
60
75
100
125
150
175
200
250
300
400
500
750
41
42
49
51
53
58
65
70
74
77
84
90
94
110
115
124
124
20
23
25
26
29
30
30
33
34
41
40
43
42
45
48
50
75
REINFORCED
RIM BASE
ONLY ONLY
6
8
12
15
17
20
25
33
42
50
55
67
80
94
133
170
270
7
9
13
17
19
21
27
35
44
53
59
71
82
98
137
179
290
RIM
&
BASE
8
10
14
18
21
23
30
37
45
55
64
75
83
100
140
185
310
9
12
16
20
25
27
33
40
48
60
68
80
88
105
148
200
350
STANDARD
LID ONLY
6
10
13
14
15
19
22
25
28
33
41
44
51
55
58
61
61
EVAPORATION DISH
ESTIMATED WEIGHT (g)
CODE
NUMBER
CAPACITY
ml
DIAMETER
mm
DEPTH
mm
STANDARD
FORM
GED55
GED80
GED100
GED125
GED150
55
80
100
125
150
59
59
67
69
69
22
30
28
32
40
28
32
40
42
50
MILK ANALYSIS DISH
CODE
NUMBER
CAPACITY
ml
GMD13
GMD30
GMD45
13
30
45
TOP
DIAMETER
mm
42
50
55
BOTTOM
DIAMETER
mm
32
40
40
DEPTH
mm
ESTIMATED
WEIGHT (g)
STANDARD
FORM
12
17
25
12
16
22
DECREPITATION DISH
CODE
NUMBER
AD6156
TOP
DIAMETER
mm
51
INTERNAL
DIAMETER
mm
49
DEPTH
mm
ESTIMATED WEIGHT
(g)
STANDARD
FORM
6
45 - 60
w ww . s o c a c h i m . c o m
28
CRUCIBLES & BEAKERS
MICRO CRUCIBLE
CODE
NUMBER
CAPACITY
ml
DIAMETER
mm
DEPTH
mm
ESTIMATED WEIGHT (g)
MC1
1
6
6
0.7
VOLATILE MATTER CRUCIBLE
ESTIMATED WEIGHT (g)
CODE
NUMBER
CAPACITY
ml
DIAMETER
mm
DEPTH
mm
CRUCIBLE
FLANGED
COVER
GVM10
GVM15
GVM20
GVM25
GVM30
GVM40
GVM50
10
15
20
25
30
40
50
25
31
33
36
40
42
45
28
31
35
35
36
42
44
7
11
15
19
22
30
38
6
8
9
10
11
13
14
LOSS ON IGNITION
ESTIMATED WEIGHT (g)
CODE
NUMBER
AC8
DIMENSIONS
mm
STANDARD
FORM
A
B
C
D
32
10
50
4.5
70 (includes lid)
CAPSULE-KAWIN CRUCIBLE
CODE
NUMBER
CAPACITY
ml
TOP
DIAMETER
mm
BOTTOM
DIAMETER
mm
DEPTH
mm
ESTIMATED
WEIGHT (g)
STANDARD
FORM
GCK8
GCK16
GCK19
8
16
19
28
33
34
20
20
20
15
30
35
9
23
25
CODE
NUMBER
CAPACITY
ml
DIAMETER
mm
DEPTH
mm
STANDARD
FORM
GB110
GB220A
GB220B
110
220
220
45
68
59
70
60
80
170
200
230
BEAKER
ESTIMATED WEIGHT (g)
29
FUSION LABWARE
SOCACHIM - XRF Scientific manufactures a range of products for automatic fusion equipment:
Phoenix, Leco, Perl-X, Claisse, Herzog, Shoeps/Autofluxer/Vulcan, Linn etc.
Non standard or special items can be manufactured on request. Ongoing developments in analytical
processes results in constant changes to laboratory equipment. If a product is not shown contact
XRFS direct for more detailed information or quotation.
PHOENIX
Ring Crucible
ESTIMATED WEIGHT (g)
CODE
NUMBER
AC1
AC2
AC3
STANDARD
FORM
DIMENSIONS
mm
A
B
C
D
E
36
36
34
36
43
36.5
20
20
20
8
12
9
37.5
37.5
40
40 - 60
40 - 60
40 - 60
Rolled Lip Crucible
ESTIMATED WEIGHT (g)
CODE
NUMBER
AC4
AC5
AC6
AC7
DIMENSIONS
mm
STANDARD
FORM
A
B
C
D
E
33
33
40
33
38
30
35
41
21
20
22
21
7
7
4
9
39
38
50
39
40
30
36
40
Mouldable
ESTIMATED WEIGHT (g)
CODE
NUMBER
AM10
AM11
DIMENSIONS
mm
STANDARD
FORM
A
B
C
D
E
39/41
29/31
3
3
25
25
44
44
56
56
80-150
80-150
Solution (ICP-AES)
ESTIMATED WEIGHT (g)
CODE
NUMBER
AC10
AC11
DIMENSIONS
mm
STANDARD
FORM
A
B
C
D
E
17
35
-
18
45
27
50
34
55
15
50
w ww . s o c a c h i m . c o m
30
Phoenix continued
Casting Dish
ESTIMATED WEIGHT (g)
CODE
NUMBER
AM1
AM2
AM3
AM4
AM5
AM6
AM6.4
AM12
AM13
AM7
AM7.5
AM8
DIMENSIONS
mm
A
B
C
29/31
30/32
30/32
30/32
32/34
33/35
33/35
34/36
38/40
39/41
39/41
39/41
3
3
4
3
3
3
4
3
4
3
5
3
42
42
42
46
46
46
46
55
52
52
52
56
STANDARD
FORM
30-100
30-100
40-100
40-100
40-100
40-100
40-100
40-100
40-100
40-100
40-100
50-100
CLAISSE®
Dimple Crucible
ESTIMATED WEIGHT (g)
CODE
NUMBER
CC1
CC2
DIMENSIONS
mm
STANDARD
FORM
A
B
C
D
E
37
37
32
32
20
20
5
5
43
43
26
30
Flat Base Crucible
ESTIMATED WEIGHT (g)
CODE
NUMBER
CC3
CC4
CC8
DIMENSIONS
mm
STANDARD
FORM
A
B
C
D
E
33
35
35
35
35
35
17
21
22
3.5
3.5
3
40
44
43
21
26
60
Casting Dish
ESTIMATED WEIGHT (g)
CODE
NUMBER
CM1
CM2
CM3
CM4
CM5
CM6
CM7
DIMENSIONS
mm
A
B
C
30/31
31/33
32/34
32/38
35/37
38/41
40/42
6
6
6
6
6
6
6
39
41
41
45
44
49
49
STANDARD
FORM
18 or 30
19 or 35
21 or 36
22 or 36
25 or 48
29 or 48
34 or 48
31
HERZOG
Crucible v1
ESTIMATED WEIGHT (g)
CODE
NUMBER
DIMENSIONS
mm
HC1
HC2
HC2M
STANDARD
FORM
A
B
C
D
E
49
49
49
30
30
30
37
40
40
56
62
-
90
110
110
Crucible v2 (HAG-G fusion machine)
ESTIMATED WEIGHT (g)
CODE
NUMBER
DIMENSIONS
mm
HC3
HC4
STANDARD
FORM
A
B
C
D
E
36
36
36.5
38.5
22
22
44
44
5
5
40
45
Rolled Lip Crucible (HAG-G fusion machine)
ESTIMATED WEIGHT (g)
CODE
NUMBER
DIMENSIONS
mm
HC4AD6133
STANDARD
FORM
A
B
C
D
E
36
38.5
22
5
44
45
Casting Dish
ESTIMATED WEIGHT (g)
CODE
NUMBER
HM1
HM5
HM2
HM3
HM4
DIMENSIONS
mm
A
B
C
29/31
32/34
38/41
39/41
39/41
3
3.5
3
4
4
44
44
52
52
50
SQ
STANDARD
FORM
(*)
40
50
100
50
120
Repair & Reshaping
If your Platinum labware is damaged or needs to be cleaned or polished SOCACHIM
offers a refurbishment service at a fraction of the price of a new product.
For more information please call: +32 (0)2 762 77 12
w ww . s o c a c h i m . c o m
32
SCHOEPS / VULCAN / AUTOFLUXER
Three Pin Crucible
ESTIMATED WEIGHT (g)
CODE
NUMBER
SC1
SC2
SC3
AD6155
DIMENSIONS
mm
A
B
C
35
44
39
35
38
38
43
38
20
26
22
20
STANDARD
FORM
D
31
50
38
45
Rolled Lip Crucible
ESTIMATED WEIGHT (g)
CODE
NUMBER
SC4
DIMENSIONS
mm
STANDARD
FORM
A
B
C
D
E
33
38
22
7
39
40
Casting Dish (Square flange)
ESTIMATED WEIGHT (g)
CODE
NUMBER
SM1
SM2
SM3
SM4
SM5
DIMENSIONS
mm
A
B
C
29/31
30/32
32/34
34/36
39/41
3
3
3
3
3
41
41
41
51
51
STANDARD
FORM
(*)
SQ
(*)
SQ
(*)
SQ
(*)
SQ
(*)
SQ
27
29
31
45
45
* SQ : Square Flange
LECO®
Crucible
ESTIMATED WEIGHT (g)
CODE
NUMBER
LC1
LC2
LC3
DIMENSIONS
mm
STANDARD
FORM
A
B
C
D
E
37
35
37
35
38
35
20
21
30
5
5
5
44
44
44
45
45
45
Casting Dish
ESTIMATED WEIGHT (g)
CODE
NUMBER
LM1
LM2
LM3
LM4
DIMENSIONS
mm
A
B
C
35/36
35/38.5
39/41
39/41
7.2
7.2
4.2
5.0
44
44
47
52
STANDARD
FORM
35
45
40
40
33
LINN®
Crucible
ESTIMATED WEIGHT (g)
CODE
NUMBER
MC1
MC3
DIMENSIONS
mm
A
B
C
41
35
49.5
48
20
20
STANDARD
FORM
38
35
Casting Dish
ESTIMATED WEIGHT (g)
CODE
NUMBER
MM1
MM2
DIMENSIONS
mm
A
B
C
31/33
39/41
3
3
41
51
STANDARD
FORM
30
45
PERL’X®
Crucible
ESTIMATED WEIGHT (g)
CODE
NUMBER
PC1
PC2
PC3
PC4
PC5
DIMENSIONS
mm
STANDARD
FORM
A
B
C
D
41
41
44
38
28
40
40
40
40
40
41
41
44
42
38
49
49
52
50
50
116
80
90
75
70
Casting Dish
ESTIMATED WEIGHT (g)
CODE
NUMBER
PM2
PM3
PM6
AM12
PM5
PM7
PM4
DIMENSIONS
mm
STANDARD
FORM
A
B
C
D
30/32
30/32
35.5/36.5
34/36
35.5/36.5
39.5/40.5
39.5/40.5
3
3.5
3
3
3.5
3
3.5
5
11.5
5
5
11.5
11.5
11.5
55
65
55
55
65
65
65
40
50
50
40-100
50
58
58
w ww . s o c a c h i m . c o m
34
KATANAX®
Flat Base Crucible
ESTIMATED WEIGHT (g)
CODE
NUMBER
KC1
DIMENSIONS
mm
A
B
C
40
32
32
STANDARD
FORM
26 or 30
Casting Dish
ESTIMATED WEIGHT (g)
CODE
NUMBER
KM1
KM2
KM3
KM4
KM5
KM6
KM7
DIMENSIONS
mm
A
B
C
30/31
31/33
32/34
32/38
35/37
38/41
40/42
6
6
6
6
6
6
6
39
41
41
45
44
49
49
STANDARD
FORM
18 or 30
19 or 35
21 or 36
22 or 36
25 or 48
29 or 48
34 or 48
MODUTEMP (SC142BMP BEADMAKING)
Crucible
ESTIMATED WEIGHT (g)
CODE
NUMBER
TC1
TC2
BC4
BC2
BC3
DIMENSIONS
mm
A
B
C
36
36
33
34.5
40
35
40
34
36
39
22
18
18
26
26
STANDARD
FORM
30 - 50
30 - 50
35 - 50
30 - 50
35 - 50
Casting Dish
ESTIMATED WEIGHT (g)
CODE
NUMBER
TM1
BM1
BM2
BM3
KM5
KM6
KM7
AM12
AM13
AM7
AM7.5
AM8
DIMENSIONS
mm
A
B
C
39/41
32/34
38/40
39/41
35/37
38/41
40/42
34/36
38/40
39/41
39/41
39/41
3
3
3
3
6
6
6
3
4
3
5
3
50
49
54
54
44
49
49
55
52
52
52
56
STANDARD
FORM
50 - 100
50 - 100
60 - 100
50 - 100
25 or 48
29 or 48
34 or 48
40-100
40-100
40-100
40-100
50-100
35
MULTI-PURPOSE
Spun Type
ESTIMATED WEIGHT (g)
CODE
NUMBER
XM1
XM2
XM28
XM3
XM4
XM5
XMD1
XMD3
XMD5
XMD7
XMD9
XMD10
XMD11
DIMENSIONS
mm
A
B
C
29/31
30/31
36/38
38/40
38/40
39/41
29/31
30/32
32/34
35/37
38/40
39/41
39/41
5
6
3
3.5
8
5
6
6
6
6
5
5
6
42
37
55
52
48
52
42
42
46
48
52
52
52
STANDARD
FORM
20-40
20-40
30-50
30-50
30-50
30-50
40
40
40
50
60
60
60
Pressed Type
ESTIMATED WEIGHT (g)
CODE
NUMBER
XM6
XM7
XM8
XM9
XM10
XM11
XM27
XM12
XM13
XM14
XM15
DIMENSIONS
mm
A
B
C
29/31
30/32
30/32
30/32
32/34
33/34
36/38
38/40
38/40
39/41
39/41
3
2.4
3
4
3
2.4
3
3
4.5
3
4
42
42
42
42
46
46
55
52
52
52
52
STANDARD
FORM
45-100
45-100
45-100
50-100
50-100
50-100
60-100
60-100
60-100
60-100
80-100
Furnace Type
ESTIMATED WEIGHT (g)
CODE
NUMBER
XM16
XM17
XM18
XM19
XM20
XM21
Xm22
XM23
XM24
XM25
XM26
DIMENSIONS
mm
A
B
C
30/32
30/32
30/32
32/35
33/35
33/35
38/40
39/41
39/41
39/41
39/41
2.5
2.5
3
2
2.5
2.5
2.5
2
2.5
3
3.5
33
39
40
39
37
39
44
44
44
44
44
STANDARD
FORM
60-100
80-100
80-100
80-100
80-100
80-100
100
100
100
100
100
w ww . s o c a c h i m . c o m
36
SPECIALITY PRODUCTS
TONGS
Platinum tip stainless steel tong
TYPE
ESTIMATED WEIGHT (g)
TGS250
TGS300
250mm long with 5 or 10g per tong
300mm long with 5 or 10g per tong
Platinum tip stainless steel tong with radiation shield
TYPE
ESTIMATED WEIGHT (g)
TGF420
TGF620
420mm long with 12g per tong
620mm long with 12g per tong
Titanium tong
TYPE
ESTIMATED WEIGHT (g)
TGF250
TGF350
250mm long
350mm long
PLATINUM BOATS
ESTIMATED WEIGHT (g)
CODE
NUMBER
DIMENSIONS
mm
STANDARD
FORM
Length Width Height
CBS1
CBS2
CBS3
or Custom
CBS
20
50
40
11
7
11
7
30
15
Provide exact dimensions
LxW xH
7
15
20
Based on your specs
CUSTOM FABRICATIONS
SOCACHIM - XRFS can supply a wide range of speciality products to supplement their standard
range of labware. Contact us to discuss your particular requirements.
> Tweezers > Spatulas > Stirring Rods > Inoculating Loops > Electrodes > Cathodes
CODE
NUMBER
DIMENSIONS
mm
ESTIMATED WEIGHT (g)
Custom
Fabrications
Please provide shape, dimensions, alloy and the
general purpose.
(with drawing, if possible)
Based on your specs
37
RESHAPERS FOR MOULDS & CRUCIBLES
Keeps your crucibles and moulds in good condition. Mould flatness is important for repeatable
analytical results.
Reshaper – Steel – to suit mould
Reshaper – Steel – to suit crucible
Reshaper – Wooden – to suit crucible
MOULD & CRUCIBLE CLEANING HOLDERS (IN
PTFE)
Mould cleaning holder helps to protect casting surface during cleaning.
5 Phoenix crucibles
Dimensions: Ø Base 110mm (140mm with crucibles) x (H) 280mm
12 Phoenix moulds
Dimensions: Ø Base 110mm x (H) 280mm
POLISHING LATHE & KIT
Crucibles and moulds should be polished when they lose their sheen, are scratched or have
performed approximately 1000 fusions.
Includes:
•
•
•
Polishing Lathe
Crucible and mould polishing Jigs
Polishing Kit:
Polishing Paste (3 & 8 micron diamond) +
Polishing oil + 1000 grit Paper + Soft & hard felt
pads
w ww . s o c a c h i m . c o m
38
SAMPLE PREPARATION
BY PRESS PELLETIZING
HYDRAULI C PRE SS ES
PRESSING ACCESSORIES & ADDITIVES
39
HYDRAULIC PRESSES
MANUAL HYDRAULIC PRESSES T15 & T25
A manually operated hand press designed for preparing powder
samples for IR and X-Ray Fluorescence Analysis. It features an
accurate pressure gauge, tough housing with polycaronate safety
door.
§
Polycarbonate safety guards
§
Adjustable upper bolster
§
Adjustable pressure control valve
§
Vacuum Ports
§
Pressure release valve
§
Optional gauges for low pressure applications
Operating to 25 tons &
15 tons respectively
Technical specifications:
Dimensions: max.310mm(W) x max. 190mm(D) x max. 610mm(H) - Weight:
50kg
AUTOMATIC HYDRAULIC PRESS T40
A Bench Mounted fully automatic Electro-Hydraulic Press for
preparing powder samples for IR and X-Ray Fluorescence Analysis.
Variable up to 40 tons capacities with see through polycarbonate
safety door and interlocks. The automatic cycle assures each sample
is subjected to the same pre-set pressure for the same time
span...giving optimum repeatability, automatically.
Technical specifications:
Electrical: 240V, 50Hz single phase 400W.
Dimensions: 500mm(L) x 350mm(D) x 706mm(H) - Weight: 150kg
Operating to 40 tons
POWER HYDRAULIC PRESSES T8 & T25
The Power Presses T25 and T8, are power assisted hydraulic
presses operating to 25 Tons and 8 Tons respectively. They have
been designed to handle a wide variety of pressing applications,
including XRF and IR sample preparation.
§
§
§
§
§
§
Operating to 25 tons &
8 tons respectively
Microprocessor controlled pressure application
Large working distance between pressing surfaces
Low noise operation
Liquid crystal digital display
Multi-lingual display option
Integral high clarity PETG safety Guards
Technical specifications:
Max. Load on Ram (Piston) T8: 8 Tons (0.5 Ton increments)
Max. Load on Ram (Piston) T25:25 Tons (1 Ton increments)
Electrical: 110 or 240 VAC 50/60 Hz .
Base Footprint 425mm(W) x 405mm(D) - Height (without lead screw):
500mm - Sample Area: 220mm(Dia) x 155mm(H) - Weight: 95kg
w ww . s o c a c h i m . c o m
40
AUTO HYDRAULIC PRESSES T8 & T25
The AUTO PRESS is designed for IR and XRF laboratory sample
preparation and are compatible with a variety of sample preparation
accessories including dies and heated platens. The microprocessor
control allows up to 6 user defined operation cycles each with up
to 10 segments. Programming is carried out using the high
contrast LCD screen which graphically displays each program
segment in turn via intuitive symbols and prompts.
§
§
§
§
§
§
Microprocessor controlled
Intuitive user interface
Large high contrast display
Multi-sequence programming
6 user defined operation cycles
Standard safety features
Technical specifications:
Max. Load on Ram (Piston) T8: 8 Tons (0.2 Ton increments)
Max. Load on Ram (Piston) T25:25 Tons (0.5 Ton increments)
Electrical: 110 or 240 VAC 50/60 Hz .
Base Footprint 425mm(W) x 405mm(D) - Height (without lead screw):
500mm - Sample Area: 220mm(Dia) x 155mm(H) - Weight: 95kg
Operating to 25 tons &
8 tons respectively
PRESSING ACCESSORIES & ADDITIVES
EVACUABLE PELLET DIE COMPLETE
Wide range of 440C hardened stainless steel Evacuable Pellet
Dies, used for compacting powdered samples into disks or
briquettes.
All of the dies are equipped with nitrile O-ring seals and an
evacuation port to allow for the removal of moisture, if desired,
during the pressing process.
§
§
§
Hardened Stainless Steel
Highly polished pellets
Evacuable for sample pellet clarity and quality
From 5 up to 40mm
Ø Plunger
(mm)
Ø Base
(mm)
Total Height
(mm)
Maximum Load
(tons)
5
10
13
20
32
40
50.8
50.8
50.8
68.3
68.3
95.3
87.4
70
70
104.1
104.1
104.1
2
5
10
25
50
80
KIT
5 mm
10 mm
13 mm
20 mm
32 mm
40 mm
41
ALUMINUM CUPS
Aluminium cups
Quantity
T apered A l um i num cups f or 32m m di a. pel l et s,
100 or 1000 per car t on
St rai ght W al l ed Al um i num cups f or 32m m di a. pel l et s,
100 or 1000 per car t on
T apered A l um i num cups f or 40m m di a. pel l et s,
100 or 600 per car t on
St rai ght W al l ed Al um i num cups f or 40m m di a. pel l et s,
100 or 600 per car t on
BINDING ADDITIVES
Grinding and Tabletting Aid – XRF Binder
Quantity
Boric Acid powder
1.5kg
Cellulose powder
1kg
Cellulose tablets; 330mg
®
(compatible with Pfaff, Herzog Automatic XRF pulverizer or ring mill)
1kg
Licowax® C micropowder (Hoechst wax)
0.7kg
XRAYMIX powder
1kg
MIX C10 tablets; 330mg
®
(compatible with Pfaff, Herzog Automatic XRF pulverizer or ring mill)
w ww . s o c a c h i m . c o m
1kg
42
FURNACES FOR
LABORATORY
APPLICATIONS
M UFFL E FURNACES
CHAM BER FURNACES
FURNACES W ITH SI C RODS
HIGH-TEM PE RATURE FURNACES
TUBE FURNACES
OPTIONS & ACCESSORIES
43
SERIES FURNACES
WEF122A
T° MAX: 1150°C – T° MAX CONTINUOUS: 1100°C
This very efficient furnace use wire elements, formed into coils
and embedded in grooves in the chamber walls. This allows
the heat energy to be radiated freely to all parts of the chamber
and gives a maximum service temperature of 1150°C.
Available in 12 litres capacity, this furnace provide an
economical solution for many heat-treatment, ashing and
general analytical purposes.
12 litres capacity
When necessary, elements may be easily changed at low cost
and without extensive dismantling.
WW31AN01X
T° MAX: 1199°C – T° MAX CONTINUOUS: 1050°C
VOLATILE MATTER FURNACE FOR COAL & COKE TESTS
(ISO 562)
This furnace uses high-power heating element to provide rapid
heating and recovery.
The chamber accepts two standard 4 place crucible stands at a
loading and has access ports for the calibration thermocouples
to be inserted below the test crucibles from the rear.
3 litres capacity
SC32A
T° MAX: 1200°C - T° MAX CONTINUOUS: 1150°C
Very efficient furnace heated by silicon carbide heating
elements.
The ceramic-fibre lined offer rapid heating combined with
excellent temperature control and uniformity.
Available in 3 litres capacity, this furnace provide an efficient &
economical solution for XRF samples fusion, Samples
calcination, LOI determination and general analytical purposes.
3 litres capacity
w ww . s o c a c h i m . c o m
44
LABORATORY MUFFLE FURNACES
WW SERIES
T° MAX: 1199°C – T° MAX CONTINUOUS: 1050°C
These economical, benchtop muffle furnaces have one-piece
ceramic chambers with the heating elements completely
hidden.
Suitable for most heat-treatment processes at temperatures up
to 1050°C, or higher (< 1200°C) for brief periods.
For particular applications, these furnaces may also be
equipped for adjustable airflow or controlled inert
atmospheres, special
controller requirements, overtemperature protection, remote monitoring etc.
Capacities from 3 up to 16 litres
They are available in a range of sizes from 3 - 16 litres
capacity.
WEM SERIES
T° MAX: 1250°C – T° MAX CONTINUOUS: 1200°C
These silicon carbide muffle chamber furnaces provide the
ideal furnace conditions for gold cupellation work and many
other processes where indirect heating and controlled airflow
are required. The heat energy is provided by coiled wire
elements located in an outer chamber. The excellent thermal
conductivity of silicon carbide provides a working chamber with
almost no temperature variations. Controlled airflow passing
through the chamber is pre-heated allowing full use of the
available hearth area.
Capacities from 13 up to 20 litres
LABORATORY CHAMBER FURNACES
WE SERIES
T° MAX: 1250°C – T° MAX CONTINUOUS: 1200°C
These very efficient furnaces use wire elements, formed into
coils and embedded in grooves in the chamber walls. This
allows the heat energy to be radiated freely to all parts of the
chamber and gives a maximum service temperature of
1250°C.
Available in a range of sizes from 12 - 50 litres, these furnaces
provide an economical solution for many heat-treatment,
ashing and general analytical purposes.
When necessary, elements may be easily changed at low cost
and without extensive dismantling.
Capacities from 12 up to 50 litres
45
LABORATORY FURNACES WITH SIC RODS
SC SERIES
T° MAX: 1250°C, 1400°C AND 1600°C
Capacities from 9 up to 34 litres
Professional quality, high-power furnaces heated by silicon
carbide heating elements.
These furnaces are available for maximum service
temperatures of 1250°C, 1400°C and 1600°C with insulation
by either brick or ceramic fibre.
For some applications, the brick chamber may be lined with
higher-temperature rated bricks.
The ceramic-fibre lined, higher temperature models offer rapid
heating combined with excellent temperature control is
required.
Having selected the ideal chamber size, and a suitable
controls package, each furnace is easily customised by the
addition of exhaust vent(s), controlled atmosphere(s), overtemperature protection, external data-logging, remote
monitoring etc.
Models such as the SC92BM find application in many roles
and are still used for the production of fused beads for XRF
work.
HIGH-TEMPERATURE FURNACES
KS SERIES
T° MAX: 1700°C AND 1800°C
These furnaces use carefully selected molybdenum
disilicide heating elements and the highest quality ceramic
fibre insulating materials. The results are furnaces able to
achieve reliable, repeatable performance at temperatures up
to 1800°C(3272°F).
Simple to use, they can be found employed in a variety of
testwork in Universities and Colleges as well as in commercial
laboratories and ceramic production houses.
Capacities from 3 up to 27 litres
SOCACHIMSERVICES
Installation & Validation > Calibration > Training > Preventive Maintenance > Repair>…
For more information please call: +32 (0)2 762 77 12
w ww . s o c a c h i m . c o m
46
TUBE FURNACES
TF SERIES
T°: FROM 200°C UP TO 1800°C
Tube furnaces enable a closely controlled, heated
environment to be created for small scale test-work. The worktube may be oriented horizontally, vertically or be fully
adjustable to any angle. Work-tubes range in size from less
than 25mm to over 150mm diameter and may be made from a
number of ceramic materials, depending on the requirements.
Maximum operating temperatures can be as low as 200°C or
as high as 1800°C(3272°F).
For some test-work, tube furnaces have one, two, three or
more heated and controlled zones.
T°: from 200°C up to 1800°C
size from less than 25mm to over 150mm For a controlled atmosphere within the worktube, tube-end
caps and an atmosphere gas control system is added.
diameter
FURNACE OPTIONS & ACCESSORIES
FURNACE CONTROLLERS
From the single
set point
controller up to
the advanced,
multi-program
PID controller.
The Temptron (Modutemp) range of instruments has been
carefully brought together to provide exactly the right
characteristics for the accurate control of furnaces, ovens, etc.,
with easy to follow instructions.
Most models feature programming capabilities and are suitable
for communications with a computer.
FURNACE RACKS
Suitable for all types of Supplied in the raw Inconel material state, the racks require a
Lab. ware
simple heat treatment step prior to usage.
A range of sizes to suit your labware type is available from an 8
position crucible rack through to a 3 position rack.
STAINLESS STEEL TONGS WITH RADIATION SHIELD
Tongs for safe and easy loading/unloading of the furnace.
2 lenghts available: 420 and 620mm
47
LABORATORY HEATING EQUIPMENT
OVENS 30-430 LITRES
T° MAX: 250°C
These general-purpose laboratory ovens provide high
efficiency drying performance in compact and robust casings.
The ovens are lined with stainless steel and use fan-forced, recirculating airflow with adjustable exhaust vents for moisture
removal. Loose fitting, stainless steel wire rack type shelves
allow east adjustment to suit differing loads.
All ovens offer maximum temperature of 250°C with digital
control and built in over-temperature protection.
BENCHTOP INFRA-RED SAMPLE DRIER
For those occasions when a small quantity of sample material
must be dried quickly. The infra-red drier is a safe and reliable
way of achieving this.
The ideal laboratory tool for safe and fast
drying of small samples
With high power, evenly distributed, small quantities of
material my be dried quickly, while the run-down timer
avoids inadvertently damaging the sample.
HOTPLATES
T° MAX: 350°C
These rugged, heavy duty hotplates are designed to withstand
the rigours of a hard-working laboratory. With Aluminium tops
measuring 600 x 300mm, provide minimal temperature
variation across the entire surface while the power is
controlled by a smooth solid state system.
Safety, effectiveness, Long working life
All stainless steel bases are supported on acid-resist, hard
rubber feet.
w ww . s o c a c h i m . c o m
48
GOLD ASSAYING
REFERENCES MATERIALS
CUPP ELATION FURNACES
CUPELS
49
REFERENCE MATERIALS CERTIFIED FOR Pt, Pd, Au
§
§
§
§
§
§
§
§
Quality internationally accepted
Reference Materials affordable for
use on an every batch basis.
§
Quality reference materials: Accepted by the International
Association of Geoanalysts
Used by laboratories, miners and explorers: For QA/QC
management
Formal certificate of analysis for each RM: Comply with the
ASTME1831-96
Guaranteed homogeneity: Confirmed by independent
formal testing.
Affordable: For use on an every batch basis.
Broad range of gold values: Blank (<0.002ppm) and 0.0798
to 30.49ppm.
Oxide and sulphide matrices: With low moisture aborption.
Technical support: For choosing RMs and statistically
analysing results.
Available in 2.5kg jars, 50g and 30g sachets.
FIRE ASSAY-CUPELLATION
CUPELS FOR GOLD ASSAY
TYPE
RRB BULLION
STD BULLION
5
5A
7R
7A
8
9
10S
13
DIMENSIONS
mm
WEIGHT (g)
A
B
C
D
E
F
R
26.3
25.4
33.3
33.3
34.9
39.7
44.5
50.8
60.3
84.1
18.5
26.6
25.4
30.2
34.9
30.2
30.2
30.2
27
44.5
21
19.8
27
27
28.6
28.6
34.9
41.3
50
71.4
7.1
9.3
9.6
9.5
10.3
11.9
14.3
12
17.5
26.1
23.8
23.8
23.8
25.4
30.2
35.7
42.1
54
76.2
7
6.4
6.4
9.6
9.5
7.9
12.7
12.7
15
19
11.3
17.5
10.3
14.3
15.8
15
18.4
23.1
28.3
43
w ww . s o c a c h i m . c o m
21.1
31
36.3
42.5
52.8
64.9
81.8
105.6
123.8
180
50
CUPELLATION FURNACES
T° MAX: 1250°C – T° MAX CONTINUOUS: 1200°C
30, 40 & 50 places Cupellation
These silicon carbide muffle chamber furnaces provide the ideal
furnaces conditions for gold cupellation work and many other
processes where indirect heating and controlled airflow are
required. The heat energy is provided by high power silicon carbide
elements located in an outer chamber. The excellent thermal
conductivity of the silicon carbide muffle provides a working
chamber with almost no temperature variations. Heated by the
silicon carbide heating elements, these furnaces provide for high
throughputs with their rapid heating and recovery. Controlled
airflow passing through the chamber is pre-heated allowing full use
of the available hearth area.
When necessary, silicon carbide heating elements may be easily
replaced, even while hot.
For the highest throughputs, with the lowest overall operating costs
for its type, the floor-standing, model SC50Cup provides ideal
chamber conditions combined with a power supply that maintains
constant cupellation conditions and automatically adjusts to get the
best possible element life.
SC50Cup - 50 places Cupellation
51
TGA ANALYZERS
Fully Automatic Multiple Sample Thermo Gravimetric Analyzers
M OIS TURE
ASH
VOL ATIL M ATTER
FI XE D CARBON
LOI
w ww . s o c a c h i m . c o m
52
THERMOGRAVIMETRIC ANALYZER
Fully automatic multiple sample thermo-gravimetric analyzer for accurate
determination of moisture, volatile content, ash, fixed carbon and loss of
ignition in a large variety of materials., including coal, coke, graphite, iron
ore, cement, bauxite ,fertilizers, rubbers, plastics, food, animal feed, snacks,
dough, wheat, flour, used engine oil etc...
Features:
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Fully automatic process.
Temperatures control up to 1000°C
Up to 8 analysed slopes per program
Programmable heating ramp rates for each slopes
Integrated brand name precision balance with 0.1mg precision readings
Selectable atmospheres: N2/O2/Air
Compressed air assisted cooling for faster cool down
Extremely robust mechanical design.
Exceptional and un-surpassed reliability.
Well known Eurotherm temperature controller.
User-Friendly Windows® based Software
Powerful ODBC data base
Network for multiple TGA units (server option)
Carousels/capacities available
Ø Turntable 24 (carousel) – 24 crucibles 16ml
Ø Turntable 20 (carousel) – 20 crucibles 16ml
Ø Turntable 16 (carousel) – 16 crucibles 30ml
Ø Turntable 12 (carousel) – 12 crucibles 50ml
Crucible in ceramic, metal or platinum
Three different capacities
53
TGA application
The windows software allows easy instrument
operation. Integration with Microsoft Office, results
are stored in Microsoft Access Data base
automatically, data can be exported automatically
and manually in TXT and CSV formats to
Microsoft Excel or several Laboratory Information
Management Systems (LIMS).
Multiple analyses such as moisture, volatile
content, ash, LOI determination – up to 8
analysed slopes per program.
Configurable parameters for all slopes up to 8
sets of settings: Final temperatures, plateau
deviations, Hold times, gases, ramp rates etc…
Open data base connectivity
The software provides a powerful ODBC data
base which allows filter that data and sort the
rows and columns to export to several
spreadsheets like Microsoft Excel, Corel Quattro
Pro or Lotus 123. All the analysis are archived in a
Microsoft Access file (.MDB extension) which can
be opened also with Microsoft Access. The data
base does not use propietary formats, all the data
is stored in standard formats and are accessible
from many programs in the market.
Easy to use diagnostics
The diagnostics allows to activate manually all the
mechanical functions of the instrument and to
check the operation of the magnetic sensors as
well as the balance and the furnace temperature
controller. The weight present in the balance as
well as the temperature and the sensors are
shown on the screen in real time as they are
changing. i.e. If there is a problem with the
stability of the balance the weight does no get the
“g”. If the user presses the “Enter Sample” button
on the instrument it is reflected in this window.
w ww . s o c a c h i m . c o m
54
1. Metallic upper carousel cuttings to absorb
expansions and contractions due to heat
2. Lower carousel
3. Crucible cover
4. Crucible with sample inside
5. Balance pedestral
6. 4 decimal places digital precision balance with
display
7. Elevation axis for upper carousel (automatic
crucible-covers placement and removal)
8. Elevation axis for both carousels
9. Pulley for carousel rotation
Metals properties
The carousels are made of refractory stainless steel alloy. The carousels do not bend nor warp under
temperature stress, metal is unbreakeable unlike ceramics. Ceramics charges with static electricity
and may produce unstable balance readings. Metals do not charge with static electricity. Our TGA
carousel design have transversal cuttings to absorb expansion and contraction. No deformation,
unbreakeable, durable.
Standardized components
TGA Instruments contain complete brand name balances and temperature controllers from recognized
manufacturers. The balance has display for easy service. The temperature controller has 2 displays: 1
for the set point and other for the present temperature. The balance as well as the temperature
controller are programmable using the buttons in the devices. These devices are manufactured by the
experts in the business. All the electric and pneumatic parts in the TGA can be acquired in the market:
Magnetic switches, relays, pneumatic valves, pistons, fans etc… With no dependency on Navas
Instruments.
All the sensors are magnetic not affected by dust. Very few propietary electronics (Only 2 boards), that fits
inside 2 slots of the PC. Access FOR SERVICE from back, sides, front and underneath.
SOCACHIMSERVICES
Installation & Validation > Calibration > Training > Preventive Maintenance > Repair>…
For more information please call: +32 (0)2 762 77 12
55
MODELS OF TGA AVAILABLE
TGA-1000
Single carousel configuration
Thermo- gravimetric Analyzer (Basic) – Single carousel configuration
Technical specifications:
Electrical: 110 or 240 VAC 50/60 Hz ; 4kW (Single-phase)
Dimensions: 700mm(L) x 550mm(D) x 650mm(H)
TGA-2000
Dual Carousel configuration
Thermo-gravimetric Analyzer (Auto covers) - Dual Carousel
configuration
The dual carousel configuration allows automatic installation and
removal of crucible-covers inside the furnace. : This prevents sample
oxidizing and provides better volatile matter accuracy in addition to
automation, (It works unattended). No danger to operator opening
furnace at 600 ºC. No danger of falling covers inside furnace.
Reduced analysis time in coal as the TGA does not go down from
900-950 ºC to 600ºC to remove covers.
Technical specifications:
Electrical: 110 or 240 VAC 50/60 Hz ; 4kW (Single-phase)
Dimensions: 700mm(L) x 550mm(D) x 650mm(H)
TGA-3000
Productivity & Performance Center (Patent Pending)
Thermo-gravimetric Analyzer (More runs / day) - Additional external
balance for increased throughput.
Same as TGA-1000 with additional external balance to obtain initial
weights of crucibles, samples and covers outside furnace during
furnace operation. The TGA-3000 allows using 1 single PC to
manage at the same time the external balance and the instrument.
THIS CONFIGURATION ALLOWS 20-200 % MORE RUNS/DAY
THAN OTHER TGA WITH MINIMAL BENCH SPACE
REQUIREMENTS.
Technical specifications:
Electrical: 110 or 240 VAC 50/60 Hz ; 4kW (Single-phase)
Dimensions: 700mm(L) x 550mm(D) x 650mm(H)
w ww . s o c a c h i m . c o m
56
Notes
57
SOCACHIM
149 av. du Capricorne
1200 Brussels/Belgium
Phone : +32 (0)2 762 77 12
Fax : +32 (0)2 762 55 07
E-mail : [email protected]
Internet: www.socachim.com
w ww . s o c a c h i m . c o m
58