d
er
te
he
ting:
rm
9-11)
shing
l will
hour vibrating chime will be set and
activated
· press C again to deactivate and cancel
vibrating chime
-
CR2032
5. Line up dot on cover with open arrow on
back.
6. Insert in battery compartment making sure
that contact is made once and not
repeatedly as this may blank or corrupt the
display and prevent the watch from working
(watch will vibrate).
7. Turn cover with coin to closed position.
8. If the watch display is blank or corrupted,
start at step 1.
ber
CR20
32
+
-
Use a coin &
twist anticlockwise
no more than
3 degrees.
Carefully loosen
the battery lid.
Vibro-Watch ‘S’
M
ificuto-
) or
2
es
th
gs.
OD
EL
: MO-10
Operation Manual
11. Guarantee:
The Malem Vibro-Watch guarantee covers
manufacturing defects for one year from date
of purchase. It does NOT cover battery, glass,
strap discolouration or damage caused by
wear and tear, water, abuse or misuse.
Sound
Vibration
CR-1632
Lithium
Compartment
Battery
Label
CR-1632
Lithium
Battery
12. Disclaimer:
Please note that the Malem Vibro-Watch is
designed as a helpful and discreet vibration
reminder. It is not intended to replace human
care or supervision and the manufacturer,
Malem Medical, is not responsible for any
consequences resulting from watch use,
misuse or failure.
Compartment
Label
Day/Second
Battery Door
Opener
LCD Display
3 4 5 6
9 10 11 12
Day/Second
Alarm Format
3 4 5 6
9 10 11 12
Alarm Format
,
2
8
2
8
shing
9. Vibrating Alarm duration & deactivation
· the vibrating alarm will last for 15 seconds
· press any of the four keys (B, C, S or M) to
stop the vibration
Please note that the Malem Vibro-Watch
has no back light nor sound.
10. Battery replacement: It is best to use a
watch repair shop to prevent damage to the
watch. Battery: CR2032
1. Twist battery cover (3 degrees, see arrows
by the right hand sides of the battery cover)
anti-clockwise to remove the old battery
(use appropriate coin). Ease/loosen cover.
2. Press all four buttons at the same time for
three seconds and release.
3. Make sure you do NOT lose the O ring.
4. Place new battery in battery cover with the
correct polarity.
+
MO22/007/14
© Malem Medical 2014
Malem Medical Ltd reserves the right to
change the specifications without prior
notice.
Malem Medical Ltd
10 Willow Holt
Lowdham
Nottingham
NG14 7EJ
England, UK
Tel: + 44 (0)115 966 4440
Fax: + 44 (0)115 966 4672
E-mail: [email protected]
Web: www.malem.co.uk
Web: www.malemmedical.com
E
Opener
and
Battery Holder
To avoid damage use
a watch repair shop
and
Battery Holder
To avoid damage use
a watch
repair
shop
Battery
Door
For
Professional
Use Only
Battery
Door
Model
Opener
MO22
OP EN
Battery
Compartment
Label
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
CL OS
Back View
1
7
12-Alarms
1
7
ific
e
Battery
Compartment
Label
Serial Number
+
LITHIUM
BATTERY
CR-1632
Serial Number
‘O’Ring
(Do not lose)
LITHIUM
BATTERY
CR-1632
Malem™
Back View
Lift metal tab slightly
when replacing battery
+
●
Lock
Lock
Sound
Vibration
Date/Minute
Month/Hour
14. Copyright:
Malem© and Vibro-Watch© are copyright
protected. © 2008 Malem Medical.
Malem Medical reserve the right to
Model
change the specifications without
MO22
prior
notice.
All measurements are show in millimeters
Model MO22
MALEM TM
CR-1632
●
Model●MO22
TM
MALEM
▼
Open/Close
CR-1632
Indicator
Lift metal tab slightly
when replacing battery
●
▼
Open/Close
Indicator
Battery Door
Opener
LCD Display
Front View
12-Alarms
Front
View
Electroluminescence
VIBRO-WATCH ©
Repeat
Timer
MALEM
Electroluminescence
TM
VIBRO-WATCH ©
Repeat
Timer
MALEM TM
IMPORTANT
NG14 7EJ, England, UK
Please read this instruction
ail: [email protected]
sheet before use
edical.co.uk
Malem™ Vibro-Watch ‘S’ Operation Manual
Date/Minute
Month/Hour
Malem™ Vibro-Watch ‘S’ Operation Manual
Month/Hour
Date/Minute
Mode (M)
Light (L)
Alarm Format
Repeat
Timer
Sound
Vibration
©
Lock
e
e
●
TM
1
7
2
8
Select (S)
3 4 5 6
9 10 11 12
Day/Second
12-Alarms
Change (C)
LCD Display
A. Features
•Real Time display in Hour, Minute, Second
•Date Display when (C) key is pressed
•Stopwatch
•Repeat
Timer Alarm with Lift metal tab Countdown
slightly
when replacing battery
Start/Stop time period setting
•12 Specific Time Alarms
‘O’Ring
(Do not lose)
•Specific Time Alarm and Countdown
Timer can be operated simultaneously
•Memory stores all settings when replacing battery. No need to re-programme
•15 seconds vibration
and/or sound alarm Battery
Compartment
format can be selected
Label individually
•Different alarm sounds for Specific Time Alarm and Countdown Timer
•Key Tone Response when operating keys
•Displays Electroluminescence Backlight
•Lock Setting function to avoid accidental change
+
LITHIUM
BATTERY
CR-1632
Serial Number
B. Key Function
•Press (C) Key to set the start countdown •Press (S) Key again to show the start
•Press (M) Key once to go back to the Real time in Minutes (Minutes will flash)
countdown time
Time display
•Press (S) Key once, starting time Hour •Press (S) Key again to show the countdown •The activated Alarm Number will be shown flash, wording ‘St’ shown
end time
on the Time Display
•Press (C) Key to set the start countdown •Press (M) Key once to go back to the Real 5. Date, Time Display
time in Hours
Time display
•Press (C) Key once
•Press (S) Key once to set the end time, the (iv) Restart (Synchronised) PA Countdown •Time display alter to Date and Weekday wording ‘En’ will then be displayed (Minutes Timer
display
•Press (M) Key twice
will flash)
•Display recover to Time display automatically •Press (C) Key to set the countdown end •Wording PA displays and then goes to after 5 seconds
setting page automatically
time in Minutes
•If press and hold the (C) Key, Date and Week-
•Press (S) Key once, to ending time Hour •Gently press and hold (C) Key 3 seconds
2. Stopwatch ‘ WA ’
day display will be maintain until C •The timer resets and counts from the key released
flash, wording ‘En’ will then be displayed
(i) Normal Counting
•Press (C) Key to set the countdown end beginning again
•Press (M) Key once to enter Stopwatch 6. Weekday and Second Display •Press (M) Key once to go back to the Real time in Hours
mode
Mode Alteration
Time
display
•Press
(S)
Key
to
confirm
and
starting
•Wording WA displays and then goes into •Press (S) key once
For
countdown
Professional
Stopwatch
mode
4.
Specific
Time
Alarm
‘
AL
’
Use Only
•The running second digit will alter to
•Counting
activation
is
valid
within
the
Model
•Press (S) Key
once to start the counting
(i) To Set Alarm Time
MO22
weekday display mode
starting and ending time only
•Press (S) Key again to stop the counting
•Press (M) Key 3 times to enter Specific Time •Press (S) Key again
•Maximum
countdown
time
is
23
hours
59
•Press (C) Key to set reading zero
Alarm Setting mode AL
•The weekday digit will alter back to second Battery Door
minutes
•Press (M)Opener
Key once to go back to the Real •Wording AL and setting page displays
and
•Press (M) Key once to go back to the Real •Press (S) Key to alter alarm number 1 to 12 display mode
Time display
TE
Battery Holder
7. Display Back Lighting
Time display TE
(ii) Sectional
Counting
until desired number displays
To avoid damage
use
a watch repair shop
•Countdown time can be restarted •Gently press and hold (S) Key 3 seconds •Press (L) Key once
•Press (M) Key once to enter Stopwatch Month/Hour
•LCD
displayDate/Minute
lights up for 3 seconds
(Synchronised) by gently pressing the until minute digit flashes
mode
(C) Key for 3 seconds •Wording WA display and then goes into •Press (C) Key to set the desired minute
8.
Lock
and
Unlock
Settings
MALEM
Note: If the Start Time and End Time are •Press (S) Key once alters to the hour digit •Press (S) and (M) Key simultaneously
Stopwatch mode
CR-1632
Alarm Format
Repeat
identical, countdown activation function will flash
Lithium
•Press (S) Key to start the counting
to lock all functions
Sound
Timer
Battery
Month/Hour
Date/Minute
Vibration
be continuous.
•Press (C) Key once to read the first •Press (C) Key to set the desired hour
•Icon
will
be
shown
on
the
display
Lock
1 2 3 4 5 6
(ii)
To
Activate
or
Terminate
the
sectional time
•Press (S) Key to confirm the setting
•All
setting and functions will be locked
7 8 9 10 11 12
MALEM
Count down Alarm PA
•Press (C) Key once to recover the time •Press (C) Key to select the alarm format and •Press
(S) and (M)Day/Second
Key simultaneously once Compartmen
12-Alarms
CR-1632
Alarm Format
Label
•Press (M) Key twice to enter the Countdown activate the alarm Front
Lithium
running
sound
and/or vibration Repeat
again to unlock all functions
View
Sound
Timer
LCD
Display
Battery
Month/Hour
Month/Hour
Date/Minute
Date/Minute
Vibration
Battery Doo
Timer setting mode
•Press (C) Key again to read the second •Press (S) Key to select another alarm Lock •The icon will then disappear
Opener
1 2 3 4 5 6
•Wording PA display and then set page number if necessary adjust as above
sectional time
7 8 9 10 11 12
MALEM
MALEM
D.
Battery
Replacement
automatically
•Sectional count can be repeated until •Repeat the above process
to set another Compartmen
Day/Second
12-Alarms DAMAGE
CR-1632
CR-1632
TO PREVENT
PLEASE USE
Alarm Format
Format
Label
Repeat
Lithium
Lithium
•Toggle (C) KeyRepeat
to select
the alarm format, Alarm
the (S) Key is pressed to terminate
alarm time
Front
View
Sound
Sound
Timer
Timer
LCD DisplayWATCH REPAIR SHOP
Battery
Battery
A
PROFESSIONAL
Vibration
Vibration
Open/Close
Battery Door
icon
means
sound
only,
icon
means
•Press (C) Key to set to zero
•Press
(M)
Key
once
to
go
back
to
the
Real
Lock
Lock
Indicator
Battery: CR-1632 (Battery life about three months Opener
1 2 3 4 5 6
1 2 3 4 5 6
vibration only, both icons
displayed means Time display
•Press (M) Key once to go back to the Real 7 8 9 10 11 12
7 8 9 10 11 12
Lift metal tab slightly
when
new). Use supplied key to open battery
when replacing
battery
12-Alarms
both vibrationDay/Second
and sound12-Alarms
are activatedDay/SecondCompartment
Time display TE
(ii) To Activate or Compartment
Terminate the Specific compartment. Please do not damage or lose
Label
Label
•Both
icons
hidden
means
the
Countdown
Time Alarm
For
Front View
3. Periodic Auto-Repeat
Alarm Front View Month/Hour
LCD Display
LCD Display
‘O’Ring
the rubber ‘O’ underneath the
battery cover.Lift
Professional
Open/Close
Battery
Door
(Do not lose)
Timer hasDate/Minute
been terminated, but the setting Battery
Door
•Press (M) Key 3 times
to
enter Specific Time Use Only
Opener
Opener
Indicator
MALEM
Model
(Countdown Timer) ‘ PA ’
metal contact slightly before inserting fresh new
Month/Hour
Date/Minute
MO22
remains saved in the memory
Alarm Setting mode
Lift metal tab slightly
MALEM
(i) To set the Countdown
Timer
battery.
Date/Minute
Month/Hour
when replacing
battery Please observe correct polarity.
•PressMonth/Hour
(M) Key once
to go back to the Real •Wording AL and
setting Date/Minute
page display
CR-1632
MALEM
•Press (M) Key twice to enter the
Alarm Format
Repeat Time display TE
Lithium
•Press (S) Key to alter number 1 to 12 until E. Guarantee
For Doo
Battery
Sound
Timer
‘O’Ring
CR-1632
Battery
MALEM
Countdown Timer
setting
mode PA
Professional
Vibration MALEM
TM Format
Opener
Alarm
Open/Close
Open/Close •Icon
(Do guarantee
not lose) Lithiumcovers
Repeat
will
be
shown
on
display
if
the
Use Only
desired number displays
The Malem
Vibro-Watch
‘S’
Battery
Back View Timer
Lock
and
Sound
Indicator
Indicator
MALEM
Model
CR-1632
Battery
CR-1632
•Wording PA displays and then sets 1 2 3 4 5 6
Compartment
Vibration
Format
Alarm Format
Holde
MO22
Repeat
Repeat
Lithium
alarm had been activated AlarmSound
Lithium
•Toggle
(C) Key to select theLock
alarm format,
manufacturing
defects for one year from date of Battery
Label
Lift metal tab slightlyTimer
7 8 9 10 11 12Lift metal tab slightly
Sound
Timer
Battery
To avoid damage
Battery
page automatically
when replacing battery
when replacing battery
1 2 3 4Vibration
5 6
Vibration
Lock
•When
Icon
flashes
this
indicates
the
timer
icon
means
sound
only,
icon
means
purchase.
It
does
NOT
cover
battery,
glass,
strap
a
watch
repair
s
7 8 9 10 11 12
Compartment
Lock
Day/Second
12-Alarms
•Gently press and hold (S) Key for 3 1 2 3 4 5 6
1 2 3 4 5 6
Label
is counting.
Countdown activation is valid ‘O’RingFor
vibration only,
both icons
displayed means
discolouration
or
damage
caused
by
wear
and
For
Battery
Door
Front View
9 10 11 12 ‘O’Ring
7LCD
8 Display
7 8 9 10 11 12
Compartment
Day/Second
12-Alarms
Professional
Professional
seconds until the minute digit flashes
Opener
(Do not lose)
(Do
notOnly
lose) Door
Label
Battery
Use
Use
Only are activated
within the
starting and
ending time only
both
vibration and
sound
tear, water, Battery
abuse
or misuse.
Back
View
Front
View
and
Compartment
Compartment
MALEM
Day/Second
Day/Second
12-Alarms
Model
Model
12-Alarms
Opener
LCD Display
•Press (C) Key toMALEM
set countdown Compartment
Battery
Holder
Label
Label
MO22
MO22
Battery
Door
(iii)
View
the
Setting
•If both icons are blank this means this alarm Label
Front View
LCD Display
Opener
LCD Display
To avoid damage
period in minute rangeFront
0 toView
59
F.
Disclaimer
Battery
Door terminated but the time setting Battery Door
•Press (M) Key twice to enter the PA
has
been
a watch repair sh
TM
Opener
•Press (S) Key once and the hour digit will Please note thatOpener
the Malem Vibro-Watch ‘S’
Countdown Timer setting mode
Doorwould not be lost.Battery
The settings
will be saved Battery
Door
flash
is designed as a helpful and discreet vibration
Opener
Opener
Open/Close
•Wording
to setting page and
in the memory.
BatteryPA display and then Battery
Back View
and
Indicator
•Press (C) Key to
set
countdown period Back View
reminder. It is not intended to replace human
Compartment
Compartment
Battery Holder
Battery Holder
Open/Close
automatically
•Press
(S) Key To
again
to
select another alarm Label
Label
Lift metal tab slightly
Indicator
To
avoid
damage
use
avoid
damage use
hour range 0 to 23 Open/Close
care or supervision and the manufacturer, Malem
when replacing battery
Open/Close
a watch repair
shop
a
watch
repair
shop
•Display
showing
the
countdown
status
number if necessary Lift metal tab slightly
Indicator
Indicator
•Press (S) Key once, to set
the start Time, Medical, is not responsible for any consequences
when replacing battery
•Press (S) Key once to show countdown For•Repeat
the above process to activate or Lift metal tab slightly
Lift metal tab slightly
‘O’Ring
‘St’ will be displayed (Minutes flash)
resulting from watch use, misuse or failure.
Professional when replacing battery
when replacing battery
(Do not lose)
Use
Only
period
setting
terminate
another
alarm
For
MALEM
Model
‘O’Ring
•Press (C) Key to set correct hour
•Press (S) Key once The Month digit flashes
•Press (C)CR-1632
Key to set correct Month
Lithium
•Press (S) Battery
Key once The Day digit flashes
•Press (C) Key to set the correct Day
•Press (S) Key once The Weekday wordingCompartment
flashes
Label
•Press (C) Key to set the correct Weekday
Battery Door
•Press (S) Opener
Key once to go back to the Real Time display TE
TM
VIBRO-WATCH ©
Electroluminescence
•Mode Key (M) - toggle the key to move between modes sequentially
TM
VIBRO-WATCH ©
Electroluminescence
Real Time
TE
Stopwatch
WA
Repeat
Timer Set
PA
Specific
Alarm Set
AL
•Select Key (S) - gently press and release key to alter Second and Week-day display mode or select the desired item in setting mode
•Change Key (C) - gently press and release key to show Date or change setting
• Light Key (L) - press once to light up the display for 3 seconds
•Alarm Stop - press any key to stop the active alarm
C. Operating Procedures
1. To set the Date and Time ‘ TE ’
•Gently press (S) Key and hold for
3 seconds until the Second digit flash
•Press (C) Key once to set the digit to zero
•Press (S) Key once Minute digit flash
•Press (C) Key to set correct minute
•Press (S) Key once Hour digit flash
•Toggle (M) Key to select AM/PM or 24 hour format (Military Time)
TM
TM
VIBRO-WATCH ©
VIBRO-WATCH ©
Electroluminescence
Electroluminescence
▼
●
●
CR-1632
+
LITHIUM
BATTERY
CR-1632
Serial Number
TM
Model MO22
▼
TM
●
●
TM
TM
CR-1632
TM
VIBRO-WATCH ©
VIBRO-WATCH ©
▼
●
VIBRO-WATCH ©
●
CR-1632
TM
+
TM
Model MO22
VIBRO-WATCH ©
●
Electroluminescence
Model MO22
Electroluminescence
▼
CR-1632
LITHIUM
BATTERY
CR-1632
Serial Number
TM
Electroluminescence
●
+
LITHIUM
BATTERY
CR-1632
+
Serial Number
Electroluminescence
LITHIUM
BATTERY
CR-1632
Serial Number
Model MO22
▼
●
●
CR-1632
+
▼
▼
LITHIUM
BATTERY
CR-1632
●
●
TM
Model MO22
●
●
CR-1632
MALEM TM
Model MO22
●
▼
Serial Number
CR-1632
●
+
LITHIUM
BATTERY
CR-1632
Serial Number
CR-1632
‘O’Ring
(Do not lose)
MALEM TM
Model MO22
MO22
For
TM
MALEM
Professional
Model
UseMO22
Only
Model
MO22
Battery Door
Opener
+
LITHIUM
BATTERY
CR-1632
Serial Number
+
LITHIUM
BATTERY
CR-1632
Serial Number
‘O’Ring
(Do not lose)
(Do not lose)
For
Professional
Use Only
Model
MO22
Professional
Use Only
Model
MO22