Download Report

DISTRIBUTOR MANUAL
2
COPPER PAIRCOIL
Insulation
Thickness
Pipe size
Pipe size (mm)
Coil
Length
Product Code
Full SAP Code
Small Tube
R-value
Large Tube
R-value
13mm
1/4" x 3/8"
6.35 x 9.52 mm
18.0 m
AKPC-13-0610/18
IKPCU13061018
1/4" tube = 0.75
3/8" tube = 0.67
13mm
1/4" x 1/2"
6.35 x 12.70 mm
18.0 m
AKPC-13-0612/18
IKPCU13061218
1/4" tube = 0.75
1/2" tube = 0.62
13mm
1/4" x 5/8"
6.35 x 15.88 mm
18.0 m
AKPC-13-0615/18
IKPCU13061518
1/4" tube = 0.75
5/8" tube = 0.61
13mm
3/8" x 5/8"
9.52 x 15.88 mm
18.0 m
AKPC-13-1015/18
IKPCU13101518
3/8" tube = 0.67
5/8" tube = 0.61
13mm
3/8" x 3/4"
9.52 x 19.05 mm
18.0 m
AKPC-13-1020/18
IKPCU13102018
3/8" tube = 0.67
3/4" tube = 0.61
19mm
1/4" x 3/8"
6.35 x 9.52 mm
18.0 m
AKPC-19-0610/18
IKPCU19061018
1/4" tube = 1.23
3/8" tube = 1.09
19mm
1/4" x 1/2"
6.35 x 12.70 mm
18.0 m
AKPC-19-0612/18
IKPCU19061218
1/4" tube = 1.23
1/2" tube = 1.00
19mm
1/4" x 5/8"
6.35 x 15.88 mm
18.0 m
AKPC-19-0615/18
IKPCU19061518
1/4" tube = 1.23
5/8" tube = 1.00
19mm
3/8" x 5/8"
9.52 x 15.88 mm
18.0 m
AKPC-19-1015/18
IKPCU19101518
3/8" tube = 1.09
5/8" tube = 1.00
19mm
3/8" x 3/4"
9.52 x 19.05 mm
15.0 m
AKPC-19-1020/15
IKPCU19102015
3/8" tube = 1.09
3/4" tube = 1.02
25mm
1/4" x 3/8"
6.35 x 9.52 mm
15.0 m
AKPC-25-0610/15
IKPCU25061015
1/4" tube = 1.76
3/8" tube = 1.56
25mm
1/4" x 1/2"
6.35 x 12.70 mm
15.0 m
AKPC-25-0612/15
IKPCU25061215
1/4" tube = 1.76
1/2" tube = 1.43
25mm
1/4" x 5/8"
6.35 x 15.88 mm
15.0 m
AKPC-25-0615/15
IKPCU25061515
1/4" tube = 1.76
5/8" tube = 1.34
25mm
3/8" x 5/8"
9.52 x 15.88 mm
15.0 m
AKPC-25-1015/15
IKPCU25101515
3/8" tube = 1.56
5/8" tube = 1.34
25mm
3/8" x 3/4"
9.52 x 19.05 mm
12.0 m
AKPC-25-1020/12
IKPCU25102012
3/8" tube = 1.56
3/4" tube = 1.30
3
ALUMINIUM PAIRCOIL
Insulation
Thickness
Pipe size
Pipe size (mm)
Coil
Length
Product Code
Full SAP Code
Small Tube
R-value
Large Tube
R-value
13mm
1/4" x 3/8"
6.35 x 9.52 mm
18.0 m
AKP-13-0610/E18
IKPAL13061018
1/4" tube = 0.75
3/8" tube = 0.67
13mm
1/4" x 1/2"
6.35 x 12.70 mm
18.0 m
AKP-13-0612/E18
IKPAL13061218
1/4" tube = 0.75
1/2" tube = 0.62
13mm
1/4" x 5/8"
6.35 x 15.88 mm
18.0 m
AKP-13-0615/E18
IKPAL13061518
1/4" tube = 0.75
5/8" tube = 0.61
13mm
3/8" x 5/8"
9.52 x 15.88 mm
18.0 m
AKP-13-1015/E18
IKPAL13101518
3/8" tube = 0.67
5/8" tube = 0.61
13mm
3/8" x 3/4"
9.52 x 19.05 mm
18.0 m
AKP-13-1020/E18
IKPAL13102018
3/8" tube = 0.67
3/4" tube = 0.61
19mm
1/4" x 3/8"
6.35 x 9.52 mm
18.0 m
AKP-19-0610/E18
IKPAL19061018
1/4" tube = 1.23
3/8" tube = 1.09
19mm
1/4" x 1/2"
6.35 x 12.70 mm
18.0 m
AKP-19-0612/E18
IKPAL19061218
1/4" tube = 1.23
1/2" tube = 1.00
19mm
1/4" x 5/8"
6.35 x 15.88 mm
18.0 m
AKP-19-0615/E18
IKPAL19061518
1/4" tube = 1.23
5/8" tube = 1.00
19mm
3/8" x 5/8"
9.52 x 15.88 mm
18.0 m
AKP-19-1015/E18
IKPAL19101518
3/8" tube = 1.09
5/8" tube = 1.00
19mm
3/8" x 3/4"
9.52 x 19.05 mm
15.0 m
AKP-19-1020/E15
IKPAL19102015
3/8" tube = 1.09
3/4" tube = 1.02
25mm
1/4" x 3/8"
6.35 x 9.52 mm
15.0 m
AKP-25-0610/E15
IKPAL25061015
1/4" tube = 1.76
3/8" tube = 1.56
25mm
1/4" x 1/2"
6.35 x 12.70 mm
15.0 m
AKP-25-0612/E15
IKPAL25061215
1/4" tube = 1.76
1/2" tube = 1.43
25mm
1/4" x 5/8"
6.35 x 15.88 mm
15.0 m
AKP-25-0615/E15
IKPAL25061515
1/4" tube = 1.76
5/8" tube = 1.34
25mm
3/8" x 5/8"
9.52 x 15.88 mm
15.0 m
AKP-25-1015/E15
IKPAL25101515
3/8" tube = 1.56
5/8" tube = 1.34
25mm
3/8" x 3/4"
9.52 x 19.05 mm
12.0 m
AKP-25-1020/E12
IKPAL25102012
3/8" tube = 1.56
3/4" tube = 1.30
Copper flare fitting
Copper straight coupling
COPPER FITTING GUIDE
Hanging clamshell packs of 2-pieces.
Shipped as 10 packs per carton
Reflok Flare fittings for Kühlpair copper
Description
4
Product Code
Full SAP Code
Clamshell size
Reflok 1/4” (6mm) copper flare fitting
AKP-CUFLARE-06
IKPCUFLARE006
Small
Reflok 3/8” (10mm) copper flare fitting
AKP-CUFLARE-10
IKPCUFLARE010
Small
Reflok 1/2” (12mm) copper flare fitting
AKP-CUFLARE-12
IKPCUFLARE012
Small
Reflok 5/8” (15mm) copper flare fitting
AKP-CUFLARE-15
IKPCUFLARE015
Large
Reflok 3/4” (20mm) copper flare fitting
AKP-CUFLARE-20
IKPCUFLARE020
Large
Hanging clamshell packs of 2-pieces.
Shipped as 10 packs per carton
Reflok straight couplings for Kühlpair copper
Description
Product Code
Full SAP Code
Clamshell size
Reflok 1/4” (6mm) copper straight coupling
AKP-CUCOUPL-06
IKPCUCOUPL006
Small
Reflok 3/8” (10mm) copper straight coupling
AKP-CUCOUPL-10
IKPCUCOUPL010
Small
Reflok 1/2” (12mm) copper straight coupling
AKP-CUCOUPL-12
IKPCUCOUPL012
Small
Reflok 5/8” (15mm) copper straight coupling
AKP-CUCOUPL-15
IKPCUCOUPL015
Large
Reflok 3/4” (20mm) copper straight coupling
AKP-CUCOUPL-20
IKPCUCOUPL020
Large
Reflok Flare fittings for Kühlpair copper
Description
Bulk Carton
Product Code
Full SAP Code
Pieces / carton
Reflok 1/4” (6mm) copper flare fitting - bulk pack
AKP-CUFLR-06/20
IKPCUFLAREB06
20
Reflok 3/8” (10mm) copper flare fitting - bulk pack
AKP-CUFLR-10/20
IKPCUFLAREB10
20
Reflok 1/2” (12mm) copper flare fitting - bulk pack
AKP-CUFLR-12/20
IKPCUFLAREB12
20
Reflok 5/8” (15mm) copper flare fitting - bulk pack
AKP-CUFLR-15/20
IKPCUFLAREB15
20
Reflok 3/4” (20mm) copper flare fitting - bulk pack
AKP-CUFLR-20/20
IKPCUFLAREB20
20
Reflok straight couplings for Kühlpair copper
Description
Bulk Carton
Product Code
Full SAP Code
Pieces / carton
Reflok 1/4” (6mm) copper straight coupling - bulk pack
AKP-CUCPL-06/20
IKPCUCOUPLB06
20
Reflok 3/8” (10mm) copper straight coupling - bulk pack
AKP-CUCPL-10/20
IKPCUCOUPLB10
20
Reflok 1/2” (12mm) copper straight coupling - bulk pack
AKP-CUCPL-12/20
IKPCUCOUPLB12
20
Reflok 5/8” (15mm) copper straight coupling - bulk pack
AKP-CUCPL-15/20
IKPCUCOUPLB15
20
Reflok 3/4” (20mm) copper straight coupling - bulk pack
AKP-CUCPL-20/20
IKPCUCOUPLB20
20
WARNING: It is important to ensure the correct fitting for the correct pipe. Reflok fittings for copper pipes have a black-coloured insert.
The Reflok - Kühlpair fittings are specifically designed for the copper pipe dimensions supplied in Kühlpair copper.
The fittings should not be used with other brands of copper where pipe dimensions are different.
Aluminium flare fitting
Aluminium straight coupling
ALUMINIUM FITTING GUIDE
Hanging clamshell packs of 2-pieces.
Shipped as 10 packs per carton
Reflok Flare fittings for Kühlpair aluminium
Description
Product Code
Full SAP Code
Clamshell size
Reflok 1/4” (6mm) aluminium flare fitting
AKP-ALFLARE-06
IKPALFLARE006
Small
Reflok 3/8" (10mm) aluminium flare fitting
AKP-ALFLARE-10
IKPALFLARE010
Small
Reflok 1/2” (12mm) aluminium flare fitting
AKP-ALFLARE-12
IKPALFLARE012
Small
Reflok 5/8" (15mm) aluminium flare fitting
AKP-ALFLARE-15
IKPALFLARE015
Large
Reflok 3/4" (20mm) aluminium flare fitting
AKP-ALFLARE-20
IKPALUFLARE020
Large
Hanging clamshell packs of 2-pieces.
Shipped as 10 packs per carton
Reflok straight couplings for Kühlpair aluminium
Description
Product Code
Full SAP Code
Clamshell size
Reflok 1/4” (6mm) aluminium straight coupling
AKP-ALCOUPL-06
IKPALCOUPL006
Small
Reflok 3/8” (10mm) aluminium straight coupling
AKP-ALCOUPL-10
IKPALCOUPL010
Small
Reflok 1/2” (12mm) aluminium straight coupling
AKP-ALCOUPL-12
IKPALCOUPL012
Small
Reflok 5/8” (15mm) aluminium straight coupling
AKP-ALCOUPL-15
IKPALCOUPL015
Large
Reflok 3/4” (20mm) aluminium straight coupling
AKP-ALCOUPL-20
IKPALCOUPL020
Large
Reflok Flare fittings for Kühlpair aluminium
Description
Bulk Carton
Product Code
Full SAP Code
Pieces / carton
Reflok 1/4” (6mm) aluminium flare fitting - bulk pack
AKP-ALFLR-06/20
IKPALFLAREB06
20
Reflok 3/8” (10mm) aluminium flare fitting - bulk pack
AKP-ALFLR-10/20
IKPALFLAREB10
20
Reflok 1/2” (12mm) aluminium flare fitting - bulk pack
AKP-ALFLR-12/20
IKPALFLAREB12
20
Reflok 5/8” (15mm) aluminium flare fitting - bulk pack
AKP-ALFLR-15/20
IKPALFLAREB15
20
Reflok 3/4” (20mm) aluminium flare fitting - bulk pack
AKP-ALFLR-20/20
IKPALFLAREB20
20
Reflok straight couplings for Kühlpair aluminium
Description
Bulk Carton
Product Code
Full SAP Code
Pieces / carton
Reflok 1/4” (6mm) aluminium straight coupling - bulk pack
AKP-ALCPL-06/20
IKPALCOUPLB06
20
Reflok 3/8” (10mm) aluminium straight coupling - bulk pack
AKP-ALCPL-10/20
IKPALCOUPLB10
20
Reflok 1/2” (12mm) aluminium straight coupling - bulk pack
AKP-ALCPL-12/20
IKPALCOUPLB12
20
Reflok 5/8” (15mm) aluminium straight coupling - bulk pack
AKP-ALCPL-15/20
IKPALCOUPLB15
20
Reflok 3/4” (20mm) aluminium straight coupling - bulk pack
AKP-ALCPL-20/20
IKPALCOUPLB20
20
WARNING: It is important to ensure the correct fitting for the correct pipe. Reflok fittings for aluminium pipes have a gold-coloured insert.
The Reflok - Kühlpair fittings are specifically designed for the aluminium pipe dimensions supplied in Kühlpair alu.
The fittings should not be used with other brands of aluminium where pipe dimensions are different.
5
6
REFLOK HAND-HELD ELECTRIC TOOL
REFLOK TOOLKIT CONTENTS
•
2 year warranty
•
6mm / 1/4” jaws
•
Makita battery, with charger that will charge fully from
flat in approximately 20 minutes
•
10mm / 3/8” jaws
•
Built in light to illuminate the fitting and pipework
•
12mm / 1/2” jaws
•
Inbuilt Hydraulic Pressure Check system (HPC)
monitors oil pressure within the tool ensuring
consistent performance
•
16mm / 5/8” jaws
•
19mm / 3/4” jaws
•
Battery charger
•
Tool heads can be fitted on top, or on the sides of the
head to allow installation at any angle
•
Deburring tool
•
Tough carrying case
•
Incorporates an automatic retraction system that
returns the head to its starting position when maximum
operating pressure (ie completion of the joint) is
reached
•
Instruction guide
•
‘Quick Stop’ feature - tool head travel stops immediately
when trigger is released
•
Release button on back of trigger to return head to fully
open position
•
LED Indicator light to indicate service intervals and
trouble-shooting codes
•
Tool kit packed in heavy duty, impact resistant durable
carry case
•
Tool kit includes fittings for conventional drills for
preparation of pipe ends
Assembling a Reflok® joint takes a few simple steps
7
1. Choose the correct jaw set for the tool.
2.Select the correct insert for the tube you are joining.
Gold = coiled aluminium tube
Black = coiled copper tube
3. Cut pipe to length and de-bur ensuring burs do not fall into the pipework.
4. Ensure the tube is completely round. If tube is deformed it may be difficult to fit the insert.
5. Push the insert into the pipe.
6. Slip the fitting onto the nut and make sure it is fully inserted. Mark the pipe showing position of fitting.
7. Remove fitting, slip nut onto pipe with the chamfered (bevelled) edge pointing towards the fitting.
8. Apply a small amount of Loctite 609 to the outside tube surface.
9. Place the fitting onto the tube rotating the fittings (or tube) so that the Loctite is distributed across the tube surface.
10. Slide the nut up so it touches the fitting.
11. Present the tool to the fitting making sure the groove in the middle of the fitting sits fully into the saddle of the jaws.
12.Keeping the tube/fitting in the alignment required, start the tool. Keep the trigger fully depressed until the tool
reaches a pre-set pressure and releases the jaws.
13.Remove the tooling. On larger sizes the nut may not be fully up to the fitting, or it may be slightly offset.
This is not a problem, however if you wish, rotate the tool/fitting slightly and re start the tool as required.
You can also watch a video
of this process at
www.kuhlpair.com.au
Armaflex® Kühlpair POS items
A. Clamshell packaging
B. Pull-up banners
C. In-store display stand
D. Kühlpair and Reflok keyrings
E. Printed brochures
A.
8
B.
C.
D.
9
E.
Shipper Carton: Kühlpair Copper
10
COPPER PAIR
Insulation thickness
Pipe size
Pipe sizes (mm)
Coil length
Net weight
Product code
13mm
1/4” x 3/8”
6.35 x 9.52 mm
18.0 m
12.44 kg
AKPC-13-0610/18
13mm
1/4” x 1/2”
6.35 x 12.70 mm
18.0 m
14.04 kg
AKPC-13-0612/18
13mm
1/4” x 5/8”
6.35 x 15.88 mm
18.0 m
17.21 kg
AKPC-13-0615/18
13mm
3/8” x 5/8”
9.52 x 15.88 mm
18.0 m
18.81 kg
AKPC-13-1015/18
13mm
3/8” x 3/4”
9.52 x 19.05 mm
18.0 m
21.59 kg
AKPC-13-1020/18
19mm
1/4” x 3/8”
6.35 x 9.52 mm
18.0 m
15.01 kg
AKPC-19-0610/18
19mm
1/4” x 1/2”
6.35 x 12.70 mm
18.0 m
16.64 kg
AKPC-19-0612/18
19mm
1/4” x 5/8”
6.35 x 15.88 mm
18.0 m
19.79 kg
AKPC-19-0615/18
19mm
3/8” x 5/8”
9.52 x 15.88 mm
18.0 m
21.57 kg
AKPC-19-1015/18
19mm
3/8” x 3/4”
9.52 x 19.05 mm
15.0 m
20.82 kg
AKPC-19-1020/15
25mm
1/4” x 3/8”
6.35 x 9.52 mm
15.0 m
15.02 kg
AKPC-25-0610/15
25mm
1/4” x 1/2”
6.35 x 12.70 mm
15.0 m
16.45 kg
AKPC-25-0612/15
25mm
1/4” x 5/8”
6.35 x 15.88 mm
15.0 m
19.67 kg
AKPC-25-0615/15
25mm
3/8” x 5/8”
9.52 x 15.88 mm
15.0 m
21.31 kg
AKPC-25-1015/15
25mm
3/8” x 3/4”
9.52 x 19.05 mm
12.0 m
20.02 kg
AKPC-25-1020/12
Shipper Carton: Kühlpair Aluminium
11
ALUMINIUM PAIRCOIL
Insulation thickness
Pipe size
Pipe sizes (mm)
Coil length
Net weight
Product code
13mm
1/4” x 3/8”
6.35 x 9.52 mm
18.0 m
8.76 kg
AKP-13-0610/E18
13mm
1/4” x 1/2”
6.35 x 12.70 mm
18.0 m
9.54 kg
AKP-13-0612/E18
13mm
1/4” x 5/8”
6.35 x 15.88 mm
18.0 m
10.99 kg
AKP-13-0615/E18
13mm
3/8” x 5/8”
9.52 x 15.88 mm
18.0 m
11.80 kg
AKP-13-1015/E18
13mm
3/8” x 3/4”
9.52 x 19.05 mm
18.0 m
12.64 kg
AKP-13-1020/E18
19mm
1/4” x 3/8”
6.35 x 9.52 mm
18.0 m
11.33 kg
AKP-19-0610/E18
19mm
1/4” x 1/2”
6.35 x 12.70 mm
18.0 m
12.13 kg
AKP-19-0612/E18
19mm
1/4” x 5/8”
6.35 x 15.88 mm
18.0 m
13.57 kg
AKP-19-0615/E18
19mm
3/8” x 5/8”
9.52 x 15.88 mm
18.0 m
14.55 kg
AKP-19-1015/E18
19mm
3/8” x 3/4”
9.52 x 19.05 mm
15.0 m
13.36 kg
AKP-19-1020/E15
25mm
1/4” x 3/8”
6.35 x 9.52 mm
15.0 m
11.96 kg
AKP-25-0610/E15
25mm
1/4” x 1/2”
6.35 x 12.70 mm
15.0 m
12.69 kg
AKP-25-0612/E15
25mm
1/4” x 5/8”
6.35 x 15.88 mm
15.0 m
14.49 kg
AKP-25-0615/E15
25mm
3/8” x 5/8”
9.52 x 15.88 mm
15.0 m
15.47 kg
AKP-25-1015/E15
25mm
3/8” x 3/4”
9.52 x 19.05 mm
12.0 m
14.05 kg
AKP-25-1020/E12
Test Certificate - Kühlpair Copper
Vipac Engineers & Scientists
Victorian Technology Centre, Private Bag 16
Port Melbourne VIC Australia 3207
t. +612 9647 9700 f. +613 9646 4370
e. [email protected] w. www.vipac.com.au
Test Certificate
Document Control:
Date of Issue: 03 April 2014
Test Date:
Company:
Armacell Australia Pty Ltd
Vipac Ref.:
Expiry date:
03 April 2017
Page:
03 March 2014 to 07 March 2014
30P-14-0020-COC-346029-2-Test
Certificate
1 of 1
Vipac Engineers and Scientists have tested the product described below (as provided by Armacell Australia Pty Ltd)
in general accordance with the test standard listed.
For further details of the products tested and the methods used see Vipac document 30P-14-0020-TRP-345951-0.
Sample Description:
Copper refrigeration pipe with compression fitting (Reflok Flare and Connector),
3
/4 “
1
3
1
5
Nominal Sizes /4 “, /8 “, /2 “, /8 “,
12
AS/NZS 1677.2:1998 (+A2) Refrigeration Systems – Safety requirements for fixed applications
Test:
Specification: AS/NZS 1677.2:1998 (+A2), Clause 3.2: Component Design Pressure
The design pressure for each component shall be not less than the maximum operating pressure of the system or part system.
Any components or fittings shall comply with an applicable Australian or New Zealand Standard. The suitability of any
component not dealt with by such a Standard shall be determined by the ability to withstand, without bursting, a hydrostatic
pressure test not less than 3 times the design pressure applicable to the component applied for not less than 1 min.
Detail:
Requirement: Assembly able to withstand hydrostatic pressure that is not less than 3 times the design pressure for a minimum
of 1 minute, at a temperature of not less than 59 ºC. The sample shall not burst during and after the hydrostatic test.
The design pressure was specified by Armacell as the saturation pressure of the refrigerant R410a at 60ºC.
Result:
Test Temperature
(ºC)
Test Pressure
Gauge (MPa)
60
11.51
1
3
/4"
Conforms
/8"
Conforms
1
/2"
Conforms
5
/8"
Conforms
3
/4"
Conforms
Test Engineer: Jason Chan
Approval:
Author:
Jason Chan
Project Engineer, Plumbing Laboratory Services
Approved: Bryan Dalziel
Plumbing Group Supervisor, Plumbing Laboratory Services
Date: 03 April 2014
Date: 03 April 2014
Vipac Engineers & Scientists Ltd ABN: 33 005 453 627
Test Certificate - Kühlpair Aluminium
Vipac Engineers & Scientists
Victorian Technology Centre, Private Bag 16
Port Melbourne VIC Australia 3207
t. +612 9647 9700 f. +613 9646 4370
e. [email protected] w. www.vipac.com.au
Test Certificate
Document Control:
Date of Issue: 15 April 2014
Test Date:
Company:
Armacell Australia Pty Ltd
Vipac Ref.:
Expiry date:
15 April 2017
Page:
10 April 2014 to 14 April 2014
30P-14-0020-COC-347633-0-Test
Certificate
1 of 1
Vipac Engineers and Scientists have tested the product described below (as provided by Armacell Australia Pty Ltd)
in general accordance with the test standard listed.
For further details of the products tested and the methods used see Vipac document 30P-14-0020-TRP-347615-0.
Sample Description:
Aluminium refrigeration pipe with compression fitting (Reflok Flare and Connector),
Test:
1
3
1
5
Nominal Sizes /4“, /8“, /2“, /8”
AS/NZS 1677.2:1998 (+A2) Refrigeration Systems – Safety requirements for fixed applications
Specification: AS/NZS 1677.2:1998 (+A2), Clause 3.2: Component Design Pressure
Detail:
The design pressure for each component shall be not less than the maximum operating pressure of the system or part system.
Any components or fittings shall comply with an applicable Australian or New Zealand Standard. The suitability of any
component not dealt with by such a Standard shall be determined by the ability to withstand, without bursting, a hydrostatic
pressure test not less than 3 times the design pressure applicable to the component applied for not less than 1 min.
Requirement: Assembly able to withstand hydrostatic pressure that is not less than 3 times the design pressure for a minimum
of 1 minute, at a temperature of not less than 59 ºC. The sample shall not burst during and after the hydrostatic test.
The design pressure was specified by Armacell as the saturation pressure of the refrigerant R410a at 60ºC.
Result:
Test
Test Pressure
Temperature
Gauge (MPa)
(ºC)
60
11.51
1
/4"
Conforms
3
/8"
Conforms
1
5
/2"
/8"
Conforms
Conforms
Test Engineer: Jason Chan
Approval:
Author:
Jason Chan
Project Engineer, Plumbing Laboratory Services
Approved: Bryan Dalziel
Plumbing Group Supervisor, Plumbing Laboratory Services
Date: 15 April 2014
Date: 15 April 2014
Vipac Engineers & Scientists Ltd ABN: 33 005 453 627
13
R-Value Confirmation - Kühlpair Paircoil
Acronem Consulting Australia Pty Ltd
April 24th 2014
Stephen Hodson
Armacell Australia
13-17 Nathan Road
Dandenong Victoria 3175
Australia
Material R-values: Kuhlpair pair-coil, Armaflex FRV
Dear Mr Hodson:
I have reviewed test reports of Thermal Conductivity according to ASTM C335,
- G.2-057c/13 of 10/06/13, for Armacell Australia - Armaflex FRV, and
- G.2-058c/13 of 14/06/13, for Armacell Australia - Armaflex FRV,
provided by FIW Munich, recognized testing, surveillance and certification body for thermal insulation
products with ISO 17025 accreditation.
14
On the basis of the results, a conservative estimate of thermal conductivity of 0.035 (W/m.K) at 23°C has
been applied to determine the Material R-values of the following Kuhlpair pair-coil, Armaflex FRV
products in accordance with AS/NZS 4859.1 Clause 2.3.3.8. These Material R-values are reported to two
significant figures in accordance with AS/NZS 4859.1 Clause 3.1.
Material R-Value (m2.K/W)
Pipe Size (mm)
Nominal thickness (mm)
13
19
25
6.35
0.75
1.2
1.8
9.52
0.67
1.1
1.6
12.7
0.62
1.0
1.4
15.88
0.61
1.0
1.3
19.05
0.61
1.0
1.3
Sincerely,
Dr Cameron Chick BE(Hons), Ph.D, G.C.Comm(Mktg), M.AIRAH
Director, Acronem Consulting Australia Pty Ltd
Registered Building Practitioner, Engineer-Civil, EC 39441
Acronem Consulting Australia Pty Ltd ACN:148 929 944
Web: www.acronem.com.au Phone: +61 437 407 176
Email: [email protected]
Page 1 of 1
Technical Data
Copper Tube AS/NZS 1571
Outer Diameter (mm)
Wall thickness (mm)
6.35
0.8
9.52
0.8
12.70
0.8
15.88
1.0
19.05
1.15
Aluminium Tube 9158-Alloy
Outer Diameter (mm)
Wall thickness (mm)
6.35
0.8
9.52
1.0
12.70
1.0
15.88
1.2
19.05
1.5
Mechanical properties:
O/H111 acc. To EN 754-2, 2008(E)
Geometrical tolerance:
Acc. To EN 13958, 2008(E)
Location of Manufacture:
Europe
Test temperatures and pressures for Reflok fittings and pipes to AS 1677.2:1998(+A2)
Temperature (°C)
Interpolated (saturated pressure) values (kPa) for R410A
Test Pressure (3 time saturation)
50
3,064
9,192
55
3,433
10,299
60
3,838
11,512
65
4,284
12,850
70
4,777
14,330
Reflok fittings with copper and aluminium pipe were tested to all above pressures
Insulation
Type
Armaflex® FRV
Location of Manufacture
Australia
Thermal Conductivity
≤ 0.035 at 23°C according to ASTM C335
Water absorption
≤ 0.1kg/m2 according to EN 13472
Flammability
Pass - NFPA274 Vertical Pipe Chase
AS1530.3 - insulation only
AS1530.3 -insulation with coating
Spread of flame: 0
Smoke developed: 5
Spread of flame: 0
Smoke developed: 7
15
Armacell Australia Pty Ltd.
13-17 Nathan Road • 3175 • Dandenong • Victoria • Australia
Phone: (03) 8710 5999 • Fax: (03) 8710 5900
www.armacell.com.au • [email protected]
Sydney Distribution Centre
Unit 2/4 Avalli Road • 2170 • Prestons • NSW • Australia
Phone: (02) 9826 6900 Fax: (02) 9607 6585
Perth Distribution Centre
Air Road Pty Ltd • 24 Miles Road • 6105 • Kewdale • WA • Australia
© Armacell Enterprise GmbH
www.kuhlpair.com.au
V2.0