1. No category

Manual
LED illumination In-Sight7000
Revision:
1. 1
Date:
21.08.2014
GER.1105
Brunner Elektronik AG
Industriestrasse 27
8335 Hittnau
Switzerland
Phone: +41 (0)44 953 1010
Fax: +41 (0)44 953 1019
www.beh.ch [email protected]
Copyright © 2009 Brunner Elektronik AG. The whole content of this document is protected by copyright. All rights are the property of Brunner Elektronik AG. Copies, transmissions, modifications or
links for public or commercial purposes without the prior written consent of Brunner Elektronik AG are prohibited. All information on technical data, dimensions, colors etc. as well as product
modifications are subject to change. The person who is responsible for application and equipment must personally ensure that each application complies with any applicable requirements,
regulations and provisions with regard to operation and safety. Brunner Elektronik AG does not assume any liability for damages or injuries caused by the installation or the use of the device.
www.beh.ch
Index
1 Sa f e ty in st ru c tio n s
3
2 I n t rod u c ti on
2.1 Overview
2.2 Product features
3
3
3
3 Sp ecif ica ti on s
3.1 Optical parameters
3.2 Operating conditions
3.3 Mechanische Kennwerte
4
4
4
5
4 E l ec t rica l p a r a m e te r s
4.1.1 Simplified diagram
4.1.2 Supply voltage
4.1.3 Trigger input
4.1.4 Maximum values
6
6
6
6
6
5 Con n ec ti on s
5.1 Connection Cable
7
7
6 O rd e r in f o rma ti on
6.1 Order information
7
7
LED illumination In-Sight7000· Manual · Rev. 1.1 · 2 – 7
www.beh.ch
1 Safety instructions
The flawless and safe operation of the device requires a proper and professional transportation, storage, assembly,
project planning as well as careful operation and maintenance. Only trained and qualified personnel should handle
electrical installations.
2 Introduction
2.1 Overview
The „LED Beleuchtung In-Sight7000“ °" is a universal vertical illuminator developed for the
camera serie In-Sight 7000 from Cognex. Due to the intense and homogeneous light, it is therefore
ideal for use in the most diverse inspection tasks. By the use of LEDs as a light source, a long
service life is ensured.
The lamp can be turned on/off digitally via a control cable. The LEDs are operated in constant current mode with
temperature compensation. The light intensity of the LEDs remains the same in the specified supply voltage range. In
the case of an increase in temperature, the LED power is increased in order to compensate for the reduction of the
light intensity due to the temperature.
Strobe operation is supported (burn time ≥ 10us).
2.2 Product features
Optical features
• Colour of the light: amber, white, true green, ultraviolet
• Illumination power: >= 15W/m2
• Illuminated area: typ. 100 x 80mm, depending on the distance
Mechanical features
• Casing
anodised aluminium
• Safety glass
glass
• Protection class
IP66
Electrical features
• Power supply 24VDC, 400mA, protected against polarity reversal
• Trigger 5V, low active
LED illumination In-Sight7000· Manual · Rev. 1.1 · 3 – 7
www.beh.ch
3 Specifications
3.1 Optical parameters
@ VCC =24V, Tamb=25°C, unless otherwise specified
Parameter
Remarks
Wavelength
red
Illumination power
@ 50% intensity
Illumination angle
Illuminated area
@ 150mm distance
Laser protection class
Parameter
Wavelength
Illumination power
Illumination angle
Illuminated area
Laser protection class
Remarks
white
@ 50% intensity
Parameter
Wavelength
Illumination power
Illumination angle
Illuminated area
Laser protection class
Remarks
true green
@ 50% intensity
Parameter
Wavelength
Illumination power
Illumination angle
Illuminated area
Laser protection class
Remarks
ultraviolet
@ 50% intensity
@ 150mm distance
@ 150mm distance
@ 150mm distance
Min.
Typ.
617
Max.
Unit
nm
W/m2
°
mm
Max.
Unit
K
W/m2
°
mm
Max.
Unit
nm
W/m2
°
mm
Typ.
Max.
375-380
Unit
nm
W/m2
°
mm
15
30
approx. 80*100
1
Min.
Typ.
6500
15
120
approx. 80*100
1
Min.
Typ.
525
15
20
approx. 80*100
1
Min.
15
20
approx. 80*100
1
3.2 Operating conditions
Parameter
Ambient temperature
Relative humidity
Remarks
Tamb
ϕ
Non-condensing
Min.
0
Typ.
Max.
40
95
Unit
°C
%
LED illumination In-Sight7000· Manual · Rev. 1.1 · 4 – 7
www.beh.ch
3.3 Mechanische Kennwerte
Parameter
Length
Width
Height
Material, casing
Material, safety glass
Protection class
L
B
H
Bemerkung
Without mounting plate
Without mounting plate
Without mounting plate
Anodised aluminium
black
satiniert, extraweiss
Min.
Typ.
110
55
50
Max.
Unit
mm
mm
mm
Al
Glas
IP66
LED illumination In-Sight7000· Manual · Rev. 1.1 · 5 – 7
www.beh.ch
4 Electrical parameters
4.1.1 Simplified diagram
4.1.2 Supply voltage
4.1.2.1 Maximum values
Parameter
Input voltage
Remarks
VCC
Min.
0
Typ.
Max.
26.4
Unit
VDC
Min.
21.6
0.28
Typ.
24
0.35
Max.
26.4
0.4
Unit
VDC
ADC
Min.
0
Typ.
5
Max.
24
Unit
V
Min.
Typ.
1.1
0.95
-2.4
-1.4
Max.
1.5
Unit
V
V
mA
mA
us
us
4.1.2.2 Operating values
@ VCC =24V, Tamb=25°C, unless otherwise specified
Parameter
Remarks
Input voltage
VCC
Input current
ICC
4.1.3 Trigger input
4.1.4 Maximum values
@ Vbb=24V, Tamb=25°C, unless otherwise specified
Parameter
Remarks
Trigger voltage
Vt
4.1.4.1 Operating values
@ Vbb=24V, Tamb=25°C, unless otherwise specified
Parameter
Remarks
Trigger voltage off
Vtoff
Trigger voltage on
Vton
Trigger current off
Itoff
@ Vt = 0V
Trigger current on
Iton
@ Vt = 5V
Switching-on delay
Ton
@ Vt < 0.5V
Switching-off delay
Toff
@ Vt > 2.0V
0.8
7
1
-2.7
-1.9
50
5
The voltage range between Vtoff_max and Vton_min is forbidden and may not be statically available at the trigger
input.
LED illumination In-Sight7000· Manual · Rev. 1.1 · 6 – 7
www.beh.ch
5 Connections
5.1 Connection Cable
Sensor connector M12 Cable pin connector
Parameter
Number of poles
Interlock
Cabel lenght
Plug lenght
Conductor cross-section
Flow resistance
Temperaturbereich
Material, contactors
Material Kontaktoberfläche
Material, contactor body
Material, casing
Brass
Gold
Polyurethan
Polyurethan
Pin
1
2
3
4
Description
Supply +24V
Trigger input
Supply 0V
Trigger-input
Color
brown
white
blue
black
Remarks
Min.
Typ.
4
screw
0.09
46
0.34
<3
-25
Name
PWR
Reserve
GND
STROBE
Max.
Unit
85
m
mm
mm2
mΩ
°C
CuZn
Au
PUR
PUR
6 Order information
6.1 Order information
Product number
GER.1105.020A.V001
GER.1105.020A.V002
GER.1105.020A.V003
GER.1105.020A.V004
Product
LED illumination In-Sight7000
LED illumination In-Sight7000
LED illumination In-Sight7000
LED illumination In-Sight7000
Specification
amber
white
true green
ultraviolet
LED illumination In-Sight7000· Manual · Rev. 1.1 · 7 – 7