“Multiblock TF” Connection fittings for one or two pipe heating systems

“Multiblock TF” Connection fittings
for one or two pipe heating systems
Technical information
Das Qualitätsmanagementsystem
von Oventrop ist gemäß DIN-ENISO 9001 zertifiziert.
Tender specification:
Oventrop connection fittings “Multiblock TF” with presetting for
regulation, isolation, draining, filling and conversion from two to
one pipe operation (supplied for two pipe operation). Swivelling
supply and return pipe connection. Distance between pipe
centres 50 mm.
Operating temperature ts:
2 °C up to 120 °C
(for short periods up to 130 °C)
Max. operating pressure ps: 10 bar (PN 10)
Max. differential pressure:
200 mbar
Body made of nickel plated brass, stem made of stainless steel
with double O-ring seal.
Conversion and isolating stem made of brass with O-ring and
cap with flat seal. Technical data as “Series AV 6”.
G 3⁄4 supply and return pipe connection according to DIN EN
16313 (cone “Euro”) for Oventrop compression fittings
(alternatively, the compression fittings of other manufacturers –
except for composition pipe “Copipe” – which are suitable for
the connection to male thread G 3⁄4 according to DIN EN 16313
(cone “Euro”) may also be used).
“Multiblock TF”
White or chrome plated design covers made of plastic are
available as accessories.
Item no.:
G 3/4
Advantages:
Oventrop connection fitting “Multiblock TF” for the connection to
all radiators with a distance of 50 mm between the pipe centres.
-
for regulation
for isolation
for draining
for filling
flow rate presettable
convertible from two to one pipe operation
use as angle or straight pattern model (swivelling)
27
The radiator is drained at the isolating and draining screw with
the help of the service tool, item no. 1090551.
(93,5)
(93.5)
Function:
Combined with a thermostat (e.g. “Uni XH”), the Oventrop
connection fittings “Multiblock TF” are proportional regulators
working without auxiliary energy. They regulate the room temperature by varying the volume flow of heating water.
34
1184025
1184035
66.5
66,5
Models:
“Multiblock TF” for radiators with:
G 3⁄4 male thread according to DIN EN 16313
Rp 1⁄2 female thread
24
50
100
G 3/4
27
Dimensions “Multiblock TF”, swivelling
Free choice of connection to the supply or return pipe, i.e.
the valve is bidirectional (junction points in the pipework are
avoided).
Application:
One/two pipe central heating systems, max. operating pressure
10 bar (PN 10), operating temperature 2 °C up to 120 °C (for
short periods up to 130 °C) irrespective of the type of heat
source.
When choosing the operating fluid, the latest technical status
has to be considered (e.g. VDI 2035 – Avoidance of damage to
hot water heating systems).
To guarantee a silent operation, the differential pressure across
the fitting should not exceed 200 mbar in any operating status.
For use on radiators with supply and return pipe connection.
Installation can be carried out with any standard pipe material.
Oventrop offers suitable compression fittings for copper,
stainless steel and plastic pipes as well as the composition pipe
“Copipe”.
The corresponding installation instructions are to be observed.
2014 Oventrop
1
Presetting
Pressure loss ∆p [mbar]
Pressure loss ∆p [kPa]
Presetting
Pressure loss ∆p [kPa]
Pressure loss ∆p [mbar]
“Multiblock TF” Connection fittings for one or two pipe heating systems
Flow rate V· [l/s]
Flow rate V· [l/s]
Two pipe operation
Two pipe operation
All patterns at 1 K P-deviation
All patterns at 2 K P-deviation
Presetting
1
2
3
4
5
6
kv value at 1 K P-deviation
0.06
0.12
0.19
0.26
0.29
0.31
kv value at 1.5 K P-deviation
0.06
0.13
0.25
0.32
0.37
0.40
kv value at 2 K P-deviation
0.06
0.13
0.25
0.35
0.42
kvs
0.44
0.53
Number of turns
Flow rate V· [l/s]
Pressure loss ∆p [kPa]
Pressure loss ∆p [mbar]
Number of turns
Pressure loss ∆p [kPa]
Pressure loss ∆p [mbar]
Performance data
Flow rate V· [l/s]
One pipe operation
One pipe operation
All patterns at 1 K P-deviation at presetting 6
All patterns at 2 K P-deviation at presetting 6
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
D-59939 Olsberg, Germany
Subject to technical modification without notice.
Telephone +49(0) 29 62 82 - 0
Fax
+49(0) 29 62 82 - 450
Product range 1
Gedruckt auf chlorfrei
E-Mail
[email protected]
ti 184-EN/20/MW
Edition 2014
gebleichtem Papier.
Internet
www.oventrop.de
2
For an overview of our global presence
visit www.oventrop.de
2014 Oventrop