KV 4430 Full Extension Push-to-Open Low Profile

KV 4430 Full Extension
Push-to-Open Low Profile
Drawer Slide
LIGHT-DUTY
65 lb. class
Low Profile
The KV 4430 Push-to-Open Low Profile Drawer Slide
features everything one would want with a lighter load
class drawer slide. Full extension, smooth and quiet
operation and lever disconnect. In addition, the 4430 has
an Xpander™ adjustment for fine tuning push-to-open
performance on wider drawers.
The 4430 allows the user to “right size” the slide for
lighter drawer applications. Plus, the 4430 features a
1-13/32" [36mm] height profile making this slide an
excellent choice for shallow drawers that require a
push-to-open feature.
4430 is ideal for inset drawer and for drawer fronts where
no handles, knobs or pulls are used. For overlay drawer
fronts, allow at least 5/32" [4mm] gap to allow Push-to-Open
feature to operate. Ideal for kitchen, mobile storage units,
store fixtures and RV applications.
Additional models within the 4430 low profile series include
the 4400 and 4450. The 4400 is a full extension drawer
slide with lever release. The 4450 is a Soft-Close slide
that eliminates the slamming of a drawer by cushioning
the closing action with a built-in dampener.
PRODUCT FEATURES
•
Full Extension 65-Pound Class rated for light-duty
applications
•
Traditional and 32mm hole patterns allow for easy,
flexible installation in a cabinet shop
•
Push-to-Open feature holds a drawer in the closed
position until activated by a slight push
•
Face Frame mounting is provided to eliminate the
need for a separate bracket
•
1/2" side clearance
•
Lever Disconnect
Knape & Vogt® 2700 Oak Industrial Drive NE, Grand Rapids, MI USA 49505 | P 616.459.3311 | 800.253.1561 | F 616.459.3290 | www.kv.com
©2014 Knape & Vogt. KV and the KV logo are trademarks of Knape & Vogt. Printed in U.S.A. OL2526/0214
KV 4430
T E C H N I C A L
I N F O R M A T I O N
CABINET DIMENSIONS
SPECIFICATIONS
model 4430 Push-to-Open Drawer Slide
mounting Side mounting for frame and frameless construction
24" [600mm]
22" [550mm]
push-open
Requires 5/32" [4mm] push-in distance to activate
mechanism
20" [500mm]
18" [450mm]
16" [400mm]
clearance 1/2", plus 1/32" minus 0" each side
load rating 65 pound class
drawer width 24" maximum drawer width
14" [350mm]
12" [300mm]
height 1-13/32" [36mm]
10" [250mm]
finish Zinc
3.78"
[96mm]
1.38"
[35mm]
1.26"
[32mm]
2.52"
[64mm]
1.26"
[32mm]
2.52"
[64mm]
2.52"
[64mm]
action Telescopic movement on precision steel ball bearings
1.26"
[32mm]
DRAWER DIMENSIONS
24" [600mm]
22" [550mm]
additional • Direct access mounting and adjustment
features • Lever disconnect for easy drawer removal
• Flexible mounting tabs can be adjusted for slide space variances
sizes 10", 12", 14", 16", 18", 20", 22", 24"
packaged Bulk Pack (4430B): 10 sets per carton, no fasteners
accessories 4101B Rear Mounting Bracket
4104B Front Face Frame Bracket
20" [500mm]
18" [450mm]
16" [400mm]
14" [350mm]
INSTALLATION
12" [300mm]
1.26"
[32mm]
10" [250mm]
1.00"
[25.4mm]
2.91"
[74mm]
3.66"
[93mm]
1.97"
1.46"
[50mm] [37mm]
2.52"
[64mm]
.35"
[9mm]
1.26"
[32mm]
1.92"
[49mm]
.60"
[15mm]
MIN. DRAWER FRONT GAP
Push drawer face front 5/32" [4mm] to open
1"
[25.4mm]
Minimum gap is 5/32" [4mm]
W* minus 1" to 1.062"
.5"
[12.7mm]
[25.4mm to 27mm]
W
**Drawer springs open 2"
[50.8mm] to 5" [127mm]
* For maximum performance, drawer width should not exceed slide length +
2" (50.8mm). Maximun drawer width: 24".
X P A N D E R™ A D J U S T M E N T
Designed to improve push-to-open operation, especially for wider
drawers. Tighten or loosen Xpander™ adjustment modules on both
sides with provided hexagonal wrench.
Push area Xpander™
3/8
"
3-9
/16
"
2-1/2"
Hexagonal Wrench
Push Area
1-1/2"
4101B Rear Mounting Bracket
4104B Front Face Frame Bracket
The 4430 Drawer slide is designed for applications in the 65 pound class with maximum drawer width of 24". Slides are tested to meet or ANSI performance standards as established by BIFMA, KCMA and BHMA.
Knape & Vogt reserves the right to change product specifications at any time without notice and without incurring responsibility for existing units.
Knape & Vogt® 2700 Oak Industrial Drive NE, Grand Rapids, MI USA 49505 | P 616.459.3311 | 800.253.1561 | F 616.459.3290 | www.kv.com
©2014 Knape & Vogt. KV and the KV logo are trademarks of Knape & Vogt. Printed in U.S.A. OL2526/0214
1.125"
[29mm]