Measuring Equipment ➔ Rules & Angles
305
Rules & Angles
The Limit range includes a wide variety of steel rules and sharp edges where DIN866 specifies the measuring tolerance and DIN874
specifies the levelness or flatness tolerance of the rules edge with a suffix determining different degrees of precision. For example,
DIN874/00 has a much smaller tolerance than DIN874/2. This section also includes several types of workshop squares where the
DIN standard is DIN875, similar to sharp edges there are suffixes to the DIN code with 00 being the most accurate. A range of
protractors and combined squares is also included for measuring angles together with various other gauges, etc.
Measuring Tapes
Measuring tapes with ABS case, tape lock and belt clip.
Power return tape features metric and imperial graduations as well as aligning
hook for internal/external measurement. Class II.
Stock No.
Measuring
Length m
3
5
8
MT03
MT05
MT08
Measuring
Length ft
10
16
26
Width
mm
13
19
25
Price
£5.90
£8.90
£16.90
Measuring Tapes
Measuring Tapes
Metric only measuring tapes with ABS case, tape lock and belt clip.
Power return tape features metric graduations as well as aligning hook for
internal/external measurement. Class II.
Stock No.
MT03MM
MT05MM
MT08MM
Measuring
Length m
3
5
8
Width
mm
13
19
25
Price
£5.90
£8.90
£16.90
Measuring Tapes
Measuring Tapes
Steel measuring tape in plastic casing. Spring return tape with lock.
Includes aligning hook for internal/external measurement. Scale in cm.
Stock
No.
147510200
147510309
147510408
Measuring
Length m
3
5
8
Width
mm
12
16
25
Price
£3.90
£5.90
£7.90
Measuring Tapes
Steel Rules
Steel rule with millimetre scale on the top edge, inches
on the lower edge (150mm only with millimetre scale).
With hanging hole.
Stock No.
ST150
ST200
Length
mm
150
200
Width x Thickness
mm
20 x 0.8
20 x 0.8
Price
£6.90
£6.90
Steel Rules
All prices exclude VAT and are subject to availability.
305
306
Measuring Equipment ➔ Rules & Angles
Steel Rules
Extra thin steel rules made of stainless steel,
graduated in mm with a hanging hole.
Stock No. Length
mm
27020106
27020205
27020304
27020403
27020502
27020601
Width x thickness
mm
100
150
200
300
500
1000
13 x 0.5
13 x 0.5
13 x 0.5
13 x 0.5
13 x 0.5
18 x 0.5
Price
£5.40
£5.40
£5.60
£6.20
£11.20
£31.00
Steel Rules
Made of stainless and hardened steel with easy to read frosted chrome plated non glare rule.
Graduated in mm and inches with a hanging hole.
Stock No. Length
mm
27030055
27030105
27030204
27030303
Width x thickness
mm
Price
15 x 0.5
25 x 1.0
30 x 1.2
35 x 1.5
£7.50
£13.00
£27.50
£51.00
150
300
500
1000
Steel Rules
Made of Stainless and hardened steel with easy to read frosted chrome plated non glare rule.
Graduated in mm with the lower edge in half mm with hanging hole.
Stock
No.
84270107
84270206
84270305
84270404
84270503
84270602
Length
mm
Width x thickness
mm
Accuracy
mm
Price
150
300
600
1000
2000
3000
15 x 0.5
25 x 1
30 x 1.2
35 x 1.2
40 x 2.0
40 x 3.0
±0.12
±0.13
±0.16
±0.20
±0.30
±0.40
£6.70
£12.50
£27.50
£57.50
£380.00
£775.00
Workshop Squares
Toolmakers adjustable square,
with a graduated steel rule. Tolerance DIN 875/2
Stock Graduated steel
No.
rule length mm
151250107
100
151250206
150
Locking steel
length mm
70
100
Price
£18.50
£19.90
Workshop Squares
Sliding Bevels
Sliding bevel with lightweight plastic stock
and 200mm nickel plated steel blade.
Stock No 166220103 ➔ Price £2.90
306
All prices exclude VAT and are subject to availability.
Measuring Equipment ➔ Rules & Angles
307
Flat Square
Made of steel with uniformly thick legs (25 x 6mm),
150mm long and 100mm short.
All faces ground and polished. DIN875/2.
Stock No SQA090 ➔ Price £33.90
Flat Squares
Made of zinc plated special steel
with tolerance according to Level 3 accuracy.
Stock
Long leg
No.
length mm
150
120470109
200
120470208
120470307
300
120470406
400
120470505
500
120470604
600
Short leg
length mm
100
130
175
230
250
300
Accuracy of
squareness ±µ
55
60
70
80
90
100
Price
£12.50
£15.90
£24.90
£29.90
£37.90
£45.90
Flat Squares
Flat Squares
Made of tool steel, all sides are ground to Tolerance DIN 875/2.
Stock
Long Leg
No.
Length mm
25331505
75
25331604
100
25331703
150
25331802
200
25331901
300
25332008
400
Short Leg
Length mm
50
70
100
130
200
250
Width x
Thickness mm
15 x 4
20 x 5
25 x 6
30 x 7
40 x 8
45 x 10
Price
£13.20
£13.20
£19.90
£26.90
£57.50
£102.90
Flat Squares
Base Squares
Made of zinc plated special steel
with tolerance according to Level 3 accuracy.
Stock
No.
120480108
120480207
120480306
120480405
120480603
Long leg
length mm
150
200
300
400
600
Short leg
length mm
100
130
175
230
300
Accuracy of
squareness ±µm
55
60
70
80
100
Price
£15.90
£20.90
£31.50
£37.20
£55.90
Base Squares
Made of tool steel, all sides are ground. Tolerance DIN 875/2.
Stock
Long leg
Short leg
No.
length mm length mm
25342007
100
70
25342106
200
130
25341553*
200
130
25342205
300
200
25341652*
300
200
25342304
400
265
Width x
Base width
Thickness mm
mm
20 x 5
20
30 X 7
30
30 X 7
30
40 X 8
40
40 X 8
40
40 X 10
45
Price
£23.90
£41.00
£239.00
£65.20
£350.00
£129.00
* Supplied with calibration certificate.
All prices exclude VAT and are subject to availability.
307
308
Measuring Equipment ➔ Rules & Angles
Engineers’ Square Set
4 piece Engineers’ square set. Made of tool steel.
All sides precision machined. Tolerance DIN875/2.
Includes 75 x 50mm, 100 x 70mm, 150 x 100mm
and 200 x 130mm sizes.
Stock No 162460901 ➔ Price £91.50
Engineers’ Squares
Made of tool steel. All sides precision machined. Tolerance DIN875/2.
Stock
No.
162460109
162460208
162460307
162460406
162460505
162460604
162460703
162460802
Long leg
length mm
75
100
150
200
260
300
400
500
Long leg
dim mm
20 x 1.5
20 x 1.5
25 x 1.5
25 x 1.5
30 x 2.0
30 x 2.0
38 x 2.0
50 x 2.0
Short leg
length mm
50
70
100
130
160
175
250
265
Short leg
dim mm
20 x 9
20 x 9
25 x 11
25 x 12.5
30 x 17.5
30 x 19
38 x 19
50 x 21
Price
£12.50
£12.90
£19.50
£36.50
£41.20
£49.90
£96.50
£185.00
Engineers’ Squares ➔
Protractors
Made of sheet steel with frosted chrome plated scale.
Supplied with lock nut.
Stock
No.
25490103
Protractor
disc Shape
Circular
Protractor disc
Diameter mm
85
Leg Length
mm
150
Price
£15.40
Protractors
Protractors
Made of steel with frosted chrome plated scale.
Supplied in a colour display box with a storage wallet.
Stock
No.
25480104
25480203
25480302
25480401
Protractor
Diameter mm
80
120
150
200
Leg Length
mm
120
150
200
300
Price
£23.90
£25.90
£34.50
£42.50
Protractors
308
All prices exclude VAT and are subject to availability.
Measuring Equipment ➔ Rules & Angles
309
Protractors
Adjustable protractor made of steel with frosted chrome plated
scale and sliding leg. Comes complete With lock nut, 150 and
200mm protractors supplied in a storage case. 300mm protractor
supplied in a wallet.
Stock
No.
25500109
25500208
Protactor
Diameter mm
150
200
Leg Length
mm
300
400
Price
£43.50
£55.90
25500406
300
600
£102.30
Adjustable Protractors
Precision Protractor
Made of stainless steel complete with knob for fine adjustment with
frosted vernier scale for reading (1/12°= 5 minutes) with magnifier
The instrument is adjustable for measuring 360° and comes with 2
separate steel rules.
Length of steel rules
mm
150 and 300
Stock No 122580103 ➔ Price £87.50
Combined Square and Angle Gauges
Supplied with protractor, angle ledge and centre head sliding on the rule. Protractor with double sided ledge, spirit level on angle ledge
and protractor. The rule is graduated in mm and inch and is supplied in a storage case.
Stock no.
Protractor, reading
Steel rule, length
Angle edge, length
Centre head, length
Price
mm
mm
mm
mm
119180107
0-180
300
110
63
£82.90
Extra steel rule 300mm
Price
119180156
£18.50
Extra steel rule 600 mm
Price
119180206
£20.50
Spare part set including nuts & screws
Price
119180305
£7.50
Combined Square & Angle Gauges
Digital Folding Bevel/Protractor
Digital protractor with a level vial on the upper side. Display with
large 13mm figures which can be zero set in any position and switch
to absolute value. Hold function button. The arm is lockable with a
locking screw which can be moved between different positions.
Reading
Scale value
Accuracy
Length of legs
Height of figures
0-360°
0.1°
+/0.25°
250
13
mm
mm
Stock No 166580100 ➔ Price £69.90
All prices exclude VAT and are subject to availability.
309
310
Measuring Equipment ➔ Rules & Angles
Machine Levels
Digital spirit level and angle gauge that can be set in all positions.
Magnetic with a V groove on the base, absolute function
(for measuring between values), automatic switch off and a facility
to “freeze” the reading in a chosen position. IP54 rated for water
and dust protection. Uses CR2032 type batteries.
Dimensions
Reading
Resolution
Precision
mm
degrees
150x60x31
0-180
0.1
±0.3
Stock No 174260109 ➔ Price £107.90
Machine Levels
Mini digital level and protractor. The display shows two values
– absolute and relative values. Flip up display for easier reading from
above. Zero set in any position. Hold functions to freeze the reading.
Magnet on base for fixing to saw blades, steel frames, etc.
Automatic switch off after three minutes. IP54 rated for water/moisture
and dust protection. Uses 2 x AAA batteries.
Dimensions
Reading
Resolution
Precision
mm
degrees
degrees
degrees
60x50x32
0-180
0.1
±0.3
NEW! Stock No 174250209 ➔ Price £85.00
LiMiT - COMPLETE MEASUREMENT TECHNOLOGY - FOR ALL SCENARIOS
310
All prices exclude VAT and are subject to availability.