Navigation: Page Down È | Go to Index Safety Equipment & Consumables Workshop, Machinery & Construction Equipment Lubricants, Sealants & Chemicals Generators.....................................................................................106–108 Water, Transfer & Trash Pumps............................................109–110 Air Compressors............................................................................110–112 Ventilation Equipment & Parts Washers...........................113–114 Metal Bench Lathes.....................................................................114–115 Hydraulic Presses, Anvil & Tube Benders................................... 116 Pipe Benders & Roll Groover.............................................................117 Rotary Tables & Vices................................................................118–120 Bricklayers String & Builders Film................................................ 122 Compactors & Tamping Rammers..................................... 122–124 Rollers & Concrete Mixers...................................................... 124–125 Concrete Vibrators, Drive Units & Trowel Machines... 125–126 Trowels, Screeds & Floats.......................................................126–127 Welding & Abrasives Demolition Breakers & Hammers .......................................127–129 Cut-Off, Floor & Band Saws................................................... 129–130 Lighting Towers...................................................................................... 130 Interactive Catalogue – Click on the Page Numbers to Navigate Clothing & Footwear 4 Machinery & Construction Equipment Fasteners | | Back to Contents | Back to Index Petrol Generators 4 Workshop, Machinery & Construction Equipment Petrol Generator – 650W • • • • • • • • Single phase 1.1hp 2 stroke 3,000/3,600rpm 0.65kVA 650W 220V Rated current: 3.7amp Yangma IE45F engine Frequency: 50/60Hz Recoil start Noise level: 64dB Air cooled Emergency low oil warning 385(l) x 320(w) x 330(h)mm Petrol Generator – 3kVA • • • • • • • • • Single phase 4hp 4 stroke 3,000/3,600rpm 3.0/3.3kVA 3,000W 240V Rated current: 9.3amp Yangma 173FG engine • • • • • • • • Frequency: 50/60Hz Recoil start Noise level: 65db Emergency low oil warning Overload protection Large muffler for quiet operation Open frame design 680(l) x 510(w) x 540(h)mm Description Part Number Description Part Number YM950L Petrol Generator 74010020 YM3500LQ Petrol Generator 74020030 Recoil Starter Spring Suit 650/950 Petrol Gen Set 74974276 Recoil Starter Assembly to Suit 74950190 Petrol Generator – 2kVA • • • • • • • • • 106 • • • • • • • Single phase 6.5hp 4 stroke 3,000/3,600rpm 2.0/2.5kVA 2,000W 240V Rated current: 10amp Yangma 168FG engine • • • • • • • • Petrol Generator – 5kVA Frequency: 50Hz Recoil start Noise level: 65dB Emergency low oil warning Overload protection Large muffler for quiet operation Open frame design 600(l) x 430(w) x 485(h)mm • • • • • • • Single phase 6.7hp 4 stroke 3,000/3,600rpm 5.0/5.5kVA 5,000W 240V • • • • • • • Rated current: 12V/8.3amp Yangma 188FG engine Frequency: 50/60Hz Recoil or electric start Noise level: 70–74dB Emergency low oil warning 680(l) x 510(w) x 540(h)mm Description Part Number Description Part Number YM2500LQ Petrol Generator 74020020 YM6500LQ Petrol Generator 74020050 Recoil Starter Suit 168F Petrol Engine 74974278 Recoil Starter Assembly to Suit 74974279 [email protected] | www.bishopbros.com.pg | | Back to Contents | Back to Index Diesel Generators 4 • • • • • • • Single phase 3,000rpm 230V Frequency: 50Hz Battery charger on electric start Earth leakage circuit breaker (ELCB) Low oil cut out function 74050060 Model kVA Wattage Engine Motor Start Tank Capacity Dimensions Dry Weight Part Number MG 5000 YE 4kVA 3,400W Yanmar L70N 6.6hp Recoil 2.7ltr 725(l) x 515(w) x 858(h)mm 83kg 74050054 MG 6000 I-D/AE-Y 6kVA 5,000W Yanmar L100AE 10hp Electric/Recoil 5.5ltr 920(l) x 460(w) x 570(h)mm 125kg 74050055 MG 6000 YE 6kVA 5,400W Yanmar L100N 10hp Recoil 5.5ltr 820(l) x 580(w) x 610(h)mm 125kg 74050060 MG 10000 K 10kVA 8,000W Kubota 17hp Electric 37.5ltr 1,156(l) x 530(w) x 952(h)mm 270kg 74050100 Spare Parts & Accessories Description Suitable For To Suit Part Number Part Number Description Suitable For To Suit Part Number Part Number Air Filter MG 6000, Yanmar L100N 74050060 74910109 Capacitor MG 6000 I-D/AE-Y 74050055, 60 74910060 Air Filter MG 6000, Yanmar L90 & L100 Diesel Engine 73060185 74910110 Capacitor MG 10000 K 74050100 74910062 Air Filter MG 10000, Kubota 74050100 74910112 Voltmeter MG 6000 74050055 74910236 Oil Filter MG 6000 74050055, 60 74910142 Diode Bridge MG 6000, MG 10000 74050055, 100 74910090 Oil Filter MG 10000 74050100 74910144 Diode MG 6000, MG 10000 74050055, 100 74910082 15A Circuit Breaker MG 6000 I-D/AE-Y 74050055, 60 74910066 Fuel Filter MG 6000 74050055 74910132 20A Circuit Breaker MG 6000 I-D/AE-Y 74050055, 60 74910068 Fuel Filter MG 10000 74050100 74910134 Workshop, Machinery & Construction Equipment Diesel Generators Full range of spare parts and accessories available for Generators including Air & Oil Filters, Recoil Starters, Universal Facing & Boring Heads, Capacitors and more... Diesel Generators • • • • • • • • • Single phase 3,000/3,600rpm 240V Rated current: 12V/8.3amp Frequency: 50/60Hz Noise level: 70–74dB Single cylinder vertical Air cooled, direct injection Emergency low oil warning 74050030 Description kVA Wattage Engine Motor Noise Level Dimensions Part Number Recoil Start 2kVA 2,000W Yangma 170FG 4hp 79dB 595(l) x 410(w) x 500(h)mm 74050010 Recoil Start 2.8kVA 3,000W Yangma 178FG 7hp 74dB 690(l) x 470(w) x 570(h)mm 74050030 Recoil Start 4.5kVA 5,000W Yangma 186FG 9hp 79dB 720(l) x 480(w) x 650(h)mm 74050050 Electric Start 4.5kVA 5,000W Yangma 186FG 9hp 79dB 720(l) x 480(w) x 650(h)mm 74060050 Spare Parts & Accessories Description Suitable For To Suit Part Number Part Number Recoil Starter Assembly 170F Diesel Engine 74050010 74930190 Recoil Starter Assembly 178F Diesel Engine 74050030 74950190 Recoil Starter Assembly 186F Diesel Engine 74050050 74970190 BISHOPS Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara 107 | | Back to Contents | Back to Index 4 Silenced Diesel Generators & Spare Parts Workshop, Machinery & Construction Equipment Silenced Diesel Generators • • • • • • 3 phase Frequency: 50Hz Electric start Water cooled Emergency stop button Auto Transfer Switch (ATS) sold separately (except MGF 22-Y – included as standard) • Comes with heavy duty GenSet alternator • Exclusive GenSet engine protection shutdown system Model kVA Voltage Wattage Engine Motor Speed Noise Level Dimensions Part Number MG 10 SP 10kVA @ 3 Phase 3.3kVA @ 1 Phase 230/400V 8,000W Perkins 12.6hp 1,500rpm 62dB 1,478(l) x 657(w) x 1,091(h)mm 74072010 MG 15 SS-Y 14kVA @ 3 Phase 4.6kVA @ 1 Phase 230/400V 14,000W Yanmar 3TNV-88 17.9hp 3,000rpm 68dB 1,500(l) x 700(w) x 1,185(h)mm 74072015 MG 20 SS-D 21.5kVA @ 3 Phase 7.5kVA @ 1 Phase 230/400V 19,000W Deutz F3M 1001 1F 28hp 1,500rpm 64dB 1,500(l) x 700(w) x 1,185(h)mm 74072023 MGF 22-Y 22kVA @ 3 Phase, 7.35kVA @ 1 Phase 230/400V 18,000W Yanmar 4TNV-88 24.5hp 1,500rpm 71dB 1,430(l) x 690(w) x 931(h)mm 74072022 MG 23 SS-Y 22.5kVa @ 3 Phase 7.5kVa @ 1 Phase 230/400V 19,000W Yanmar 4TNV-88 24hp 1,500rpm 68dB 1,500(l) x 700(w) x 1,185(h)mm 74072024 MG 35 S-P 35kVA 230/400V 30,000W Perkins 1103C-33G3 40.8hp 1,500rpm 67dB 1,974(l) x 913(w) x 1,320(h)mm 74072035 MG 50 S-P 50kVA 230/400V 40,000W Perkins 1103C-33TG3-3 63.2hp 1,500rpm 67dB 1,974(l) x 913(w) x 1,320(h)mm 74072050 MG 70 SS-P 68kVA 230/400V 60,000W Perkins 1104C-44TG3 80.2hp 1,500rpm 66dB 2,400(l) x 950(w) x 1,500(h)mm 74072070 230/400V 95,000W Perkins 1104C-44TAG2 133hp 1,500rpm 69dB 3,002(l) x 1,150(w) x 1,767(h)mm 74072115 MG 115 SS-P 110kVA Spare Parts & Accessories Spare Parts & Accessories Description Suitable For To Suit Part Number Part Number Description Suitable For To Suit Part Number Part Number Air Filter – Deutz MG 20 SS-D 74072023 74910116 Fuel Filter MG 115 74072115 74910141 Air Filter Housing MG 20 SS-D 74072023 74910119 Change Over Switch & Panel MG 10 Type Sets 74072010 74085100 Air Filter 1 – 104(OD) x 60(ID) x 294(h)mm MG 35 SS-P 74072035 74910118 Change Over Switch & Panel MG 15 Type Sets 74072015 74085102 Air Filter 2 – 60(OD) x 42(ID) x 286.5(h)mm MG 35 SS-P 74072035 74910120 Change Over Switch & Panel MG 20 Type Sets 74072023 74085104 Air Filter 1 – 164(OD) x 92(ID) x 356(h)mm MG 70 SS-P 74072070 74910122 Change Over Switch & Panel MG 23 Type Sets 74072024 74085106 Air Filter 2 – 93(OD) x 73(ID) x 343(h)mm MG 70 SS-P 74072070 74910124 Change Over Switch & Panel MG 35 Type Sets 74072035 74085108 Air Filter 1 – 162(OD) x 92(ID) x 345.5(h)mm MG 115 SS-P 74072115 74910126 Change Over Switch & Panel MG 50 Type Sets 74072050 74085109 Air Filter 2 – 93(OD) x 72(ID) x 330(h)mm MG 115 SS-P 74072115 74910128 Change Over Switch & Panel MG 70 Type Sets 74072070 74085110 Oil Filter MG 20 SS-D 74072023 74910148 Change Over Switch & Panel MG 115 Type Sets 74072115 74085114 Oil Filter MG 35 SS-P 74072035 74910150 Auxiliary Contact MG 20, MG 35, MG 70, MG 115 74072023, 35, 70, 115 74910016 Oil Filter MG 70, MG 115 74072070, 115 74910152 Auxiliary Contact MG 20, MG 35, MG 70, MG 115 74072023, 35, 70, 115 74910018 Fuel Filter MG 20 SS-D 74072023 74910138 Diode Bridge MG 20, MG 35 74072023, 35 74910092 Fuel Filter MG 35 SS-P T 74072035 74910139 Diode Bridge MG 70, MG 115 74072070, 74072115 74910094 Fuel Filter MG 70, MG 115 74072070, 115 74910140 – – – For all Compressor Accessories, Hoses and Guns go to the Hydraulics, Valves, Hoses & Fittings section, pages 433–438 108 [email protected] | www.bishopbros.com.pg – | | Back to Contents | Back to Index Water & Transfer Pumps 4 • High pressure pump • Suitable for irrigation, gardening and water draining • Lightweight and portable • Recoil start • Maximum suction head: 8m • 4 stroke, YM 168F-2 engine 74410020 74410030 Engine Power Port Size Head Capacity Displacement Self-Priming Time Speed Dimensions Weight Part Number YM 168F-2 4,000W/5.5hp 50mm/2" 26m 25m3/h 163cc 180s/4m 3,600rpm 480 x 430 x 400mm 20kg 74410020 YM 168F-2 4,800W/6.5hp 80mm/3" 28m 60m3/h 196cc 60s/4m 3,600rpm 505 x 415 x 470mm 31kg 74410030 Spare Parts & Accessories Description Suitable For To Suit Part Number Part Number Recoil Starter 168F Petrol Engine 74410020, 74410030 74974278 Diesel Water Pumps • • • • • High pressure pump Suitable for irrigation, gardening and water draining Lightweight and portable Recoil start Maximum suction head: 8m 74440020 Workshop, Machinery & Construction Equipment Petrol Water Pumps 74430030 Engine Power Port Size Max. Head Capacity Displacement Self-Priming Time Speed Dimensions Weight Part Number YM 170F 2.5kW/3.4hp 2" 26m 36m3/h 211cc 70s/4m 3,000rpm 490 x 420 x 500mm 35kg 74430020 YM 178F 3.8kW/5.2hp 3" 28m 60m3/h 296cc 120s/4m 3,000rpm 600 x 470 x 530mm 52kg 74430030 YM 178F 4.4kW/6.0hp 2" 65m 30m3/h 296cc 60s/4m 3,600rpm 590 x 475 x 540mm 57kg 74440020 Spare Parts & Accessories Description Suitable For To Suit Part Number Part Number Description Suitable For To Suit Part Number Part Number Recoil Starter Assembly 170F Diesel Engine 74430020 74930190 Recoil Starter Assembly 178F Diesel Engine 74430030, 74440020 74950190 Diesel Driven Transfer Pumps • • • • Self priming from 8 metres High volume water transfer Fast fill tanker applications Flood irrigation • Construction site dewatering • Viton seals fitted • Adjustable for pumping diesel fuels and some chemicals 74440050 74440060 Engine Start Motor Max. Head Max. Flow Inlet/Outlet Part Number Yanmar Recoil 4.8hp 28m 700ltr/min 2" 74440050 Yanmar Recoil 4.8hp 30m 1,050ltr/min 3" 74440055 Yanmar Electric 4.8hp 30m 1,050ltr/min 3" 74440056 Kubota Electric 9.0hp 30m 1,600ltr/min 4" 74440060 BISHOPS Claw & Camlock Couplings, Joiners and more available in the Hyrdraulics, Valves, Hoses & Fittings section, pages 441–443 Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara 109 | | Back to Contents | Back to Index Trash & Submersible Pumps, Drain Cleaner & Air Compressor 4 Workshop, Machinery & Construction Equipment 3” Trash Pump PT 3H • Hatz diesel air-cooled, single cylinder, 4-cycle engine • Max. discharge head: 29mm • Max. discharge: 1,515ltr/min • Max. suction lift: 7.6m • Solid size capacity: 38mm • Displacement: 347cm3 • 5kW (6.8hp) • Max. speed: 3,500rpm • Fuel tank capacity: 5ltr • Fuel consumption: 1.7ltr/hr • Weight: 73kg Submersible Pump MSP-3 • Aluminium casting body • Discharge diameter: 73mm/3” • Max. lift: 18m • Max. capacity: 1,300ltr/min • 3,000–3,600rpm • 5m hose • 22kg 76550160 K-1500B Drain Cleaner Kit 76550200 6” Trash Pump PT 6LS • This high performance pump is the ideal choice for moving large volumes of water • Discharge elbow rotates 360º to accommodate various discharge angles • Automatic engine shutdown protects engine from damage due to low oil pressure or high cylinder temperature • Lombardini 11LD625-3 diesel 3 cylinder air-cooled, 4-cycle engine • Displacement: 1,870cm3 • Max. speed: 2,500rpm • Max. rated power: 24kW • Fuel consumption: 4.5ltr/hr • Fuel tank capacity: 114ltr • Discharge head: 30.5m • Pressure: 3 bar • Flow rate: 4,933ltr/min • Suction lift height: 7.5m • Max. solids diameter: 50mm • Weight: 850kg 33922 • All-round sewer and drain cleaning machine • Low-profile frame design fits most crawl spaces • Easy to use and transport • Powerful 0.75hp 240V motor • Equipped to handle 15ft sections of 11⁄4" cable to clean 3"–8" (32–200mm) lines to 200ft (61m) • Weight: 95kg/210lb 64080850 For Drive Pump Units, continue on to page 125 76550220 Submersible Pump SP55/6 • For use with Wacker Neuson diesel and petrol drive units • Suitable for pumping from waste pits, dams, drainage trenches, footing, tanks, swimming pool excavations, and many other applications • Handles solids up to 15mm • Impeller can be adjusted to compensate for wear, without requiring special tools • Rugged, low maintenance design • Lightweight and self-priming • Quick release drive coupling • External protection spirals • Heavy duty lifting eye • Corrosion resistant cast iron body • Multiple long-life seat • Quality reliability • 6m flexible shaft 76550180 110 Cyclone Portable Electric Air Compressor AIR150 • 12V DC, 23amp • 150psi • Flow rate: 37.5ltr/min • Complete with coil hose and gauge with sports adaptor kit • Handy travel bag included 73010105 [email protected] | www.bishopbros.com.pg | | Back to Contents | Back to Index Electric Air Compressors 4 Super Tiger 245 Portable Electric Air Compressor • • • • • • • • 1,500W 240V Displacement: 8.7cfm, 245ltr/min Max. air pressure: 116psi/8bar 50ltr capacity Noise level: 79dB 890(l) x 380(d) x 720(h)mm Weight: 26kg Workshop, Machinery & Construction Equipment • Cast iron cylinder; steel valve plate • Overload protection of electric motor with manual reset • Pressure switch; Pressure reducer with manometer and cock • Comes with regulator • Two wheels for easy transportation • 2hp • 2,850rpm 73010190 Electric Air Compressors 73010250 • Belt driven • Splash lubrication, forced ventilation, cast iron cylinder • Pressure switch • Condensate drain cock • Max. air pressure: 145psi/10bar 73010250, 73010245, 73010320 & 73020110 • Piston compressor two cylinder 90°V placed • Aluminium valve plate and steel valves • Overload protection of electric motor with manual reset • Pressure reducer with one or two cocks • Comes with regulator and gauge 73020280 & 73020620: • Piston compressor three cylinders W placed • Overload protection of electric motor with thermal relay • Ball line cock • Steel valve plate and steel valves • Final manifolds for cooling the air entering the tank 73025100 & 73025150: • Piston compressor two cylinder 90°V placed • Splash lubrication, cast iron cylinder, cast iron valve plate and steel valves • Final manifolds for cooling the air entering the tank • Overload protection with thermal relay • Ball line cock 73010320 73020280 73010245 73020110 73025150 Description Stage Motor Phase Voltage Wattage Displacement Weight Part Number Mobile 1 3.0hp 1 230V 2,200W 10.4cfm, 295ltr/min 100ltr Tank Capacity Noise Level 79dB Speed 1,320rpm 1,100(l) x 470(d) x 790(h)mm Dimensions 70kg 73010245 Mobile 1 3.0hp 3 400V 2,200W 11.5cfm, 325ltr/min 50ltr 76dB 1,450rpm 890(l) x 380(d) x 690mm 72kg 73010250 Mobile 1 3.0hp 1 240V 2,200W 14.1cfm, 399ltr/min 60ltr 76dB 820rpm 70kg 73010320 Stationary 1 5.5hp 3 415V 4,100W 22.6cfm, 640ltr/min 300ltr 78dB 1,180rpm 1,500(l) x 510(d) x 1,120(h)m 215kg 73020110 Stationary 1 7.5hp 3 415V 5,500W 38cfm, 1,076ltr/min 270ltr 79dB 1,180rpm 1,580(l) x 530(d) x 1,130(h)mm 262kg 73020280 Stationary 1 10hp 3 415V 7,500W 52cfm, 1,472ltr/min 270ltr 79dB 1,190rpm 1,580(l) x 530(d) x 1,130(h)mm 273kg 73020620 Stationary 2 7.5hp 3 400V 5,500W 22cfm, 623ltr/min 270ltr 84dB 1,220rpm 2,000(l) x 600(d) x 1,140(h)mm 216kg 73025100 Stationary 2 10hp 3 400V 7,500W 45cfm, 1,274ltr/min 270ltr 80dB 1,080rpm 1,550(l) x 550(d) x 1,200(h)mm 220kg 73025150 930(l) x 430(d) x 760(h)mm Electric Screw Air Compressors • 3 phase 73050200 73050115 Description Motor Wattage Displacement Max. Air Pressure Tank Capacity Noise Level Dimensions Weight Part Number Plus 3008 30hp 22,000W 117cfm, 3,300ltr/m 116psi/8bar N/A 72dB 1,110(l) x 680(d) x 1,040(h)mm 365kg 73050115 MCi 5008 50hp 37,000W 208cfm, 5,900ltr/m 116psi/8bar N/A 71dB 1,530(l) x 870(d) x 1,400(h)mm 605kg 73050200 BISHOPS Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara 111 | | Back to Contents | Back to Index Petrol & Diesel Air Compressors 4 Workshop, Machinery & Construction Equipment Portable Petrol Air Compressors • Piston compressor two cylinder 90°V placed • Splash lubrication, forced ventilation, cast iron cylinder and steel valves • ON/OFF pressure switch • Two rear wheels for ease of transport 73030110 Only: • Aluminium valve plate • Overload protection • Pressure reducer with one or two cocks • Condensate drain cock 73030120 Only: • Cast iron valve plate • Final manifolds for cooling the air entering the tank • Overload protection with thermal relay Engine Motor Wattage Displacement Capacity Speed Noise Level Dimensions Weight Part Number Loncin G200F 196CC 5.5hp 4,100W 11.5cfm 100ltr 1,450rpm 76dB 1,100(l) x 500(d) x 820(h)mm 70kg 73030110 Loncin G200F 196CC 6.5hp 4,500W 14.1cfm 60ltr 1,450rpm 85dB 1,200(l) x 620(d) x 890(h)mm 82kg 73030120 Diesel Air Compressors • Recoil or electric start • Emergency stop button • Portable compressor comes fitted with four wheels Spare Parts & Accessories 73060185 Description Suitable For To Suit Part Number Air Filter Yanmar L 100 Diesel Engine 73060185 74910110 Description Engine Motor Wattage Displacement Max. Air Pressure Capacity Speed Noise Level Dimensions Weight Part Number Portable Yanmar L48 4.7hp, 3 cyl 3,500W 17.3cfm 140psi 70ltr 1,024rpm 95dB 1,120(l) x 400(w) x 870(h)mm 117kg 73060175 Stationary Yanmar L70 6.7hp, 3 cyl 5,000W 31.0cfm 140psi 125ltr 969rpm 99dB 1,470(l) x 470(w) x 1,060(h)mm 206kg 73060180 Stationary Yanmar L100 10hp, 2 cyl 7,500W 33.2cfm 175psi 120ltr 1,392rpm 98dB 1,150(l) x 540(w) x 1,090(h)mm 246kg 73060185 Portable Diesel Air Compressors • Direct driven • Progressive volume flow regulation • Soft start; start by rotary switch • Operational reliability • Air end with spin-on oil filter cartridge • Controller with digital display 73055035 Only: • Bolted single sheets • Transparent plastic fuel tank • Inside main switch board • Automatic stop in case of malfunction 73055050 & 73055070 Only: • Bolted single sheets • Air filters • Transparent plastic fuel tank • Inside main switch • Automatic stop in case of malfunction • Flexible mudguards 73055080 Only: • Side wing doors with a wide upwards opening angle • Separate air filters for engine and air compressor • Automatic stop in case of malfunction • Flexible mudguards 112 Engine Wattage Motor Displacement Capacity Max. Air Pressure: Noise Level Dimensions Part Number Kubota D1505 23,100W 31hp 105cfm 40ltr 103psi/7bar 69dB/98LwA 2,947(l) x 1,200(w) x 1,194(h)mm 73055035 Yanmar A2300 33,500W 45hp 180cfm 60ltr 103psi/7bar 69dB/98LwA 3,241(l) x 1,490(w) x 1,327(h)mm 73055050 Cummins B3.3TAA 63,000W 84hp 270cfm 140ltr 103psi/7bar 71dB/99LwA 3,760(l) x 1,700(w) x 1,440(h)mm 73055070 Cummins QSB4.5 97,000W 130hp 400cfm 210ltr 126psi/8.6bar 71dB/99LwA 4,440(l) x 1,820(w) x 1,790(h)mm 73055080 [email protected] | www.bishopbros.com.pg | | Back to Contents | Back to Index Air Recievers, Ventilators, Fume Extractor Tube & Parts Washers • For use in industrial compressed air systems • Vertical design to maximise floor space • 4 x 2" BSP inlet and outlet sockets Grab Parts Washer Cleaner & Degreaser from the Janitorial, Hygiene, Crib & Leisure Products section, pages 216–217 Tank Capacity Design Pressure Diameter Overall Height Weight Part Number 530ltr 1,215kPa (176psi) 640mm 2,140mm 233kg 73060120 820ltr 1,225kPa (178psi) 780mm 2,215mm 390kg 73060140 Champion G11XD Filters • Used with stationary air compressors 90ltr Light Duty Electric Parts Washing Tank • • • • Description Part Number Pre-Filter 66560600 Post-Filter 66560610 Spring loaded safety lid Flexible metal hose and nozzle Storage shelf under tank Tank dimensions: 730(l) x 500(w) x 230(h)mm Workshop, Machinery & Construction Equipment Vertical Air Receivers 4 Portable Ventilator Sets • Compact in size, easy to operate • Aluminium blades • Suitable for use in manholes, underground tunnels, shipyards and other narrow places • Includes fume extractor tube 30208020 76585200 110ltr Parts Washer Diameter Flow Rate Tube Length Voltage Part Number 12" 60–70m2/min 5m 240V 76585100 24" 70–90m2/min 10m 415V 76585200 Fume Extractor Tube • Suit portable ventilator (76585100) with 12" diameter ducting • Length: 5m 76585390 BISHOPS SG79135 • 375mm deep soak basin • 240V industrial grade pump • 40°C, 1,000W heater with separate switch • Flex spigot and nylon flow-thru brush • Clean out plug for easy draining • Operation capacity: 95ltr • Includes stainless steel work shelf, filter kit and circulating pump • Overall dimensions: 900(l) x 600(w) x 975(h)mm • Shipping weight: 37kg 30208027 Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara 113 | | Back to Contents | Back to Index 4 Parts Washers & Metal Bench Lathes Workshop, Machinery & Construction Equipment 219ltr Parts Washer Mini Metal Bench Lathe – 250 x 500mm SG79265 • 225mm deep soak basin • 240V industrial grade pump • 40°C, 1,000W heater with separate switch • Flex spigot and nylon flow-thru brush • Clean out plug for easy draining • Operation capacity: 205ltr • Includes stainless steel work shelf, filter kit and circulating pump • Overall dimensions: 1,012(l) x 750(w) x 975(h)mm • Shipping weight: 45kg • • • • • • • • • • • • 3 phase 750W 240V 1.5hp Frequency: 50Hz 21mm spindle bore Spindle: MT3 Spindle speed: 150–2,500rpm Distance between centres: 550mm Max. swing over bed: 250mm Centre height: 125mm Bed width: 135mm • 1,015(l) x 500(w) x 500(h)mm (without stand) • Stand included Accessories • 3 jaw chuck (125mm) • Quadruple tool holder • Chip sump • Rear splash guard • Lathe chuck protection • 2 centres • Tool kit with accessories and change gears 30208029 292ltr Part Washer SG79185 • Heavy duty stainless steel construction • 700mm deep soak basin (at deepest point) • 240V industrial grade pump • 40°C, 6,000W heater (element lead requires hardwiring) • Operation capacity: 260ltr • Self-cleaning agitating platform • Includes non-adjustable back-up thermostat • Overall dimensions: 1,310(l) x 850(w) x 1,650(h)mm • Shipping weight: 260kg 75550100 Metal Bench Lathe – 360 x 1,000mm • • • • • • • • • • • 30208030 1,100W at 3 phase 1,500W at 1 phase 3.0hp Spindle speed: 65–1,810rpm 5MT, 38mm dia. spindle 230V Frequency: 50Hz Distance between centres: 1,000mm Max. swing over bed: 360mm Centre height: 179mm Bed width:206mm Accessories: • 3 jaw chuck (160mm) • Change gears set • 3MT dead centres • 3MT and 5MT reduction sleeves • Oil gun • Tool box with tools • Foot stands • Splash guard and oil tray Find Lathe & Machining Tools in the Hand & Cutting Tools section, pages 377–390 75550200 114 [email protected] | www.bishopbros.com.pg | | Back to Contents | Back to Index Metal Bench Lathes 4 • Fitted with a safety torque limiting device and overload clutch • 3 phase • 4 jaw chuck • 4,000W/5.4hp at 1 phase • Optional 5,500W/7.5hp at 3 phase • MT6, D1-6/58mm spindle bore • Spindle speed: 25–2,000rpm • Distance between centres: 1,500mm • Max. swing over bed: 410mm • Centre height: 205mm • Bed width: 300mm Accessories: • 3 jaw chuck (250mm) • Driving plate • Centre and centre sleeves • Oil gun • Wrenches • Operation manual 75550400 Metal Bench Lathe – 460 x 1,500mm • • • • • • • • • • • • • • Precision ground Fitted with safety torque limiting device 3 phase 4,000W/5.4hp at 1 phase Optional 5,500W/7.5hp at 3 phase 415V 50Hz Spindle speed: 25–2,000rpm MT6, D1-6/58mm spindle bore Capacity: 1,500mm Distance between centres: 1,500mm Centre height: 230mm Bed width: 300mm Max swing over bed: 460mm Accessories: • 3 and 4 jaw chucks • Change gears set • Chasing dial indicator • Reduction sleeve • Dead centres • Tool box with tools • Full length splash guard • Brake and coolant system • Steady rest and follow rest Workshop, Machinery & Construction Equipment Metal Bench Lathe – 410 x 1,500mm 75550460 Metal Bench Lathe – 560 x 2,000mm • 3 phase (415V, 50Hz) • 7,500W • 10hp • Spindle speed: 25–1,600rpm • MT7, 80mm spindle bore • Distance between centres: 1,500mm • Centre height: 1,160mm • Max. swing over bed: 560mm • Bed width: 350mm Accessories: • 3 jaw and 4 jaw chucks • Quick change tool set • Leadscrew cover • Steady rest • Dead centre 75550560 Metal Bench Lathe – 560 x 3,000mm • 3 phase • 7,500W • 10hp • 380V • Frequency: 50/60Hz • MT7, D1-8/80mm spindle bore • Spindle speed: 25-1,600rpm • Distance between centres: 3,000mm • Max. swing over bed: 560mm • Centre height: 1,160mm Accessories: • 4 jaw chuck 75550600 BISHOPS Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara 115 | | Back to Contents | Back to Index Hydraulic Presses, Anvil, Tube Benders & Straightener 4 Workshop, Machinery & Construction Equipment Hydraulic Shop Presses Lever Tube Bender • Can bend up to 180° angle • Suitable for light duty applications • Easy to use and has clearly marked measurements • 6mm capacity 64010210 Tube Bender 68114 • Accepts pipes with an outside diameter of 12, 15 and 22mm • Weight: 3.5kg Capacity Stroke Work Range Weight Part Number 12t 175mm 0–920mm 63kg 77060012 20t 182mm 0–910mm 82kg 77060020 30t 160mm 0–840mm 150kg 77060030 50t 175mm 0–890mm 243kg 77060050 75t 250mm 226–1,042mm 425kg 77060070 100t 280mm 0–950mm 900kg 77060099 Forged Anvil 69622 • The RIDGID Pedding-Haus® anvil has long stood for quality and craftsmanship • Pedding-Haus® anvils are drop-forged and produced entirely from high grade steel for maximum durability • The top face is ground and induction hardened to provide a lively surface to work on • Horn: 5.5" • Face: 8" • Weight: 35kg/77.1lb 64020583 64010250 3-in-1 Combination Tube Bender 68111 • Accepts pipes with an outside diameter of 6, 8 and 10mm or 1⁄4”, 5⁄16” and 3⁄8” • Bending capabilities of 0–180° 64010030 Rebar Bender/Straightener Find Rubber Hammers in the Hand & Cutting Tools section, page 345 DBR-32WH • Can bend and straighten up to 32mm rebar with 500N/mm2 tensile strength • Bending speed: 4 seconds/90° • 240V • 660 x 270 x 200mm • Weight: 26kg 75040120 116 [email protected] | www.bishopbros.com.pg | | Back to Contents | Back to Index Pipe Benders & Roll Groover 1000 • Well established and proven bending technology and process developed with co-operation from pipe and tube designers/manufacturers to accommodate a huge range of their product • Round and square pipes • Thick and thin walled pipes • Bends by drawing pipe through former and rollers • The TruForm bender can bend pipes in many directions and through various degrees in the shortest possible length of pipe. This versatile feature means that the Dawn TruForm bender can be used for virtually any application • Robust construction Hydraulic Pipe Benders • Heavy gauge plate bender with hardened tool steel former/roller sets • Will bend mild steel, stainless steel and aluminium pipes • Used for steel fencing, street sign posts, gates, handrails, bench frames, cattle, sheep and horse stockyards, exhaust systems, bull bar construction, trampolines, commercial furniture, fire sprinkler systems, compressed air lines, playground equipment, boat trailers, ladder racks, roll bars and sheds • Bend angle range: 0–180° • Includes former sets: Round 15, 20, 25, 32, 40 and 50nb; Square 20, 25, 30, 35, 40 and 50mm • Angle of bend: approx 90° • Suitable for bending steel pipes • 609(w) x 546(d) x 1,555(h)mm 77050050 Pipe OD Capacity Ram Stroke Weight Part Number 15–50mm 12t 232mm 38.5kg 77050050 15–75mm 15t 238mm 57.5kg 77050075 Hydraulic Pipe Bender PB-10N • Complete unit with frame, cylinder, pivot shoes, angle gauge and pipe shoes • Designed to bend various thicknesses of steel pipes without wrinkles • Frame is made of an aluminium alloy making it lighter and easier to transport • Can be powered by a variety of 700 bar power sources • Pump not included; choice of hand, air/hydraulic or electric • 15–50mm nominal bore gas/water pipe • Hinged top plate • Pipe shoes included: 15mm, 20mm, 25mm, 32mm, 40mm and 50mm • Weight without pump: 18.6kg Workshop, Machinery & Construction Equipment Truform Bender 4 77050310 Curvamatic Hydraulic Pipe Benders • Designed to bend water, oil and gas steel pipes with maximum comfort and speed • Provides optimum consistency and safety • Anchored on a rotating tripod • 2-VELO automatic valve system for fast preloading • 360° rotating base 60016 61099130 Heavy Duty Pipe Bender Set 62168 • Fame and former system designed in conjunction with tube manufacturers • Suitable for use in: water services, gas services, handrails, gates, framework, galvanised, gas, water and steam pipes • Comes complete with six super grade iron formers: 15, 20, 25, 32, 40 and 50mm • 10t rating • Robust construction • Quick bending and release action • Bends pipes with excellent results • Hydraulic unit is based on military jack design • Simple set up and operation • Portable 61099115 BISHOPS Product Code Description Pipe Size Capacity Weight Part Number 60015 Curvamatic 2 6–50mm 10t 75kg 77050150 60016 Curvamatic 3 6–75mm 13t 110kg 77050175 915 Roll Groover 88232 • Lightweight design suitable for stainless steel, copper and PVC pipes • Easy to use depth setting gauge • Up to 12" pipe capacity in one unit for service versatility • Cast-in carrying handle for easy transport or lock-up to prevent theft • Includes 90° bend-in handle to make grooving easier • Customised tool box available • Pipe capacities: 11⁄4"–12" schedule 10 steel and stainless steel 11⁄4"–6" schedule 40 steel 11⁄4"–2" schedule 40 stainless steel 2"–8" K, L, M, DWV copper 11⁄4"–6" schedule 40 PVC 11⁄2", 21⁄2"–3" schedule 80 PVC • Weight: 10.4kg/23lb 75590402 Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara 117 | | Back to Contents | Back to Index Rotary Tables & Vices 4 Workshop, Machinery & Construction Equipment Rotary Tables • Can be used horizontally or vertically • Practical design and excellent performance • Used for circular work, angle cost setting, boring, spot facing and more Need a Drill Press? Head to the Power & Pneumatic Tools section, pages 142–143 75598505 Universal Machine Vice Centre Hole MT Centre Hole Dia. Table Dia. Weight Part Number #2 25 x 6mm 160mm/6" 23kg 75598504 #3 30 x 6mm 200mm/8" 31.5kg 75598505 #4 40 x 10mm 320mm/12" 77kg 75598510 • 360° rotatable base • Tiltable body • Base can be secured to stable bench top 61098125 Machine Vice • • • • • • • • • • For drilling, shaping and milling machines 360º swivel base Base can be secured to bench or stand Mechanical clamping Body made of high quality cast iron Max. jaw opening: 160mm Jaw width: 200mm Jaw height: 63mm Weight: 52kg Dimensions: 530(l) x 310(w) x 240(h)mm Jaw Width Jaw Height Max. Jaw Opening Dimensions 75mm 34mm 80mm 300(l) x 180(w) x 150(h)mm 11kg Weight 61098075 125mm 46mm 100mm 350(l) x 195(w) x 200(h)mm 28kg 61098125 Drill Press Unigrip Vice DPV/UG/125 • Manufactured from graded cast iron • Precision ground base and vice bed for smooth lateral movement of the jaw • Longitudinal and transversal prisms in the fixed jaw allow for firm gripping of round pieces both horizontally and vertically. Special seat in jaws facilitates retaining of flat work pieces • Convenient unigrip mechanism. Spindle moves inside the hollow hand grip allowing the vice to be used at a location away from the table edge, increasing the scope of application • Jaw width: 120mm • Max. jaw opening: 110mm 61598720 Machine (Drill Press) Vices – Super Grade • • • • Accurately machined slide Case hardened, replaceable “V” notched jaws ACME thread screw Corrosion resistant screw and forged handle • Slots for hold down mounting bolts • Also available with 125mm jaws 61098860 Drill Press Unigrip 3 Way Vice Product Code Vice Jaw Width Max. Jaw Jaw Opening Height Weight Dimensions Part Number 60219 75mm 60mm 27mm 4.6kg 170(l) x 135(w) x 64(h)mm 61598702 60220 100mm 120mm 37mm 11.6kg 240(l) x 190(w) x 82(h)mm 61598704 Plain Base Hydraulic Machine Vice • • • • • • • Hinged pipe vice Strong ductile iron frame Ideal for repetitive clamping tasks on pipework Can be fitted to bench or stand 3.2–152.5mm, 50–305mm capacity Dimensions: 960(l) x 252(w) x 136(h)mm Weight: 58kg 76045910 118 DPV/UG/3/100 • Manufactured from graded cast iron • Precision ground base and vice bed for smooth lateral movement of the jaw • Longitudinal and transversal prisms in the fixed jaw allow for firm gripping of round pieces both horizontally and vertically special seat in jaws facilitates retaining of flat work pieces • Convenient unigrip mechanism. Spindle moves inside the hollow hand grip allowing the vice to be used at a location away from the table edge, increasing the scope of application • Also available with 3 mounting options via 2 additional precisely ground surfaces: end face and side face. This allows for drilling along all axes with a single setting of the job and holding of long workpieces which are cumbersome and difficult to manage in regular vices • Jaw width: 100mm • Max. jaw opening: 88mm 61098850 [email protected] | www.bishopbros.com.pg Part Number | | Back to Contents | Back to Index Vices Offset Engineer’s Vices • All steel construction, built to withstand the shocks of hammering, chipping and other tough applications • Each vice has an integrated anvil for shaping and beating, an extra heavy-duty sliding jaw, large diameter steel screw and forged tommy bar • Carbon steel jaws are hardened 50±5HRC to withstand tough use and are serrated for non-slip grip • Safety stopper at the end of slide prevents it from fall during usage Regular • Australian designed ‘Offset Advantage’ which allows the user to work on long vertical sections with the full width of the jaws without obstruction from the main body of the vice • High strength cast iron body, slide and nut • Corrosive resistant ACME threaded screw • ‘V’ notched, case hardened replaceable jaws • Swarf deflector • Forged steel handle • Also available with 150mm jaws and all sizes available in Super Grade Ductile Iron Offset Product Code Description Jaw Width Jaw Opening Weight Part Number EBV/F/100 Regular Vice 100mm 120mm 6.3kg 61098260 EBV/F/150 Regular Vice 150mm 150mm 17.2kg 61098265 EBV/F/200 Regular Vice 200mm 200mm 36kg 61098270 OBV/F/100 Offset Vice 100mm 120mm 7kg 61098280 OBV/F/150 Offset Vice 150mm 175mm 20kg 61098285 Standard Engineer’s Vices • • • • Original Dawn 100% Australian made and designed heavy duty vice High strength cast iron body, slide and nut Corrosive resistant ACME threaded screw “V” notched, case hardened, replaceable jaws • Swarf deflector • Forged steel handle • All fixed vices also available in Super Grade Ductile Iron Vice Size Jaw Width Max. Jaw Opening Weight Dimensions Part Number 60151 75mm 85mm 5.4kg 250(l) x 120(w) x 113(h)mm 61598020 60153 100mm 115mm 16kg 367(l) x 163(w) x 177(h)mm 61598040 60156 150mm 175mm 33.4kg 497(l) x 195(w) x 215(h)mm 61598060 60157 200mm 225mm 57.8kg 650(l) x 237(w) x 275(h)mm 61598080 60163 100mm 115mm 18.8kg 367(l) x 215(w) x 205(h)mm 61598090 60165 125mm 145mm 27.5kg 445(l) x 238(w) x 225(h)mm 61598100 60166 150mm 175mm 39.9kg 497(l) x 265(w) x 252(h)mm 61598110 60167 200mm 225mm 74.6kg 650(l) x 335(w) x 336(h)mm 61598120 Product Code Product Code Vice Size Jaw Width Max. Jaw Opening Weight Dimensions Part Number 60178 100mm 115mm 26.6kg 418(l) x 267(w) x 210(h)mm 61598140 60180 125mm 145mm 39.4kg 492(l) x 294(w) x 231(h)mm 61598150 Fabricated Offset Engineer’s Vices • Australian designed ‘Offset Advantage’ which allows the user to work on long vertical sections with the full width of the jaws without obstruction from the main body of the vice • Designed for all heavy duty work • Manufactured from steel plate • Corrosive resistant screw • Replaceable case hardened jaws • “V” notched jaw to hold round objects • Precision machined bearing surface ensuring smooth operation • Also available with 125 and 200mm jaws • Left hand offset versions also available Workshop, Machinery & Construction Equipment Engineer’s Steel Bench Vices 4 Fixed Swivel Fabricated Engineer’s Vices • • • • • • • • • Designed for all heavy duty work Manufactured from steel plate Corrosive resistant screw Replaceable case hardened jaws ‘V’ notched jaw to hold round objects Forged steel handle Cast iron nut Precision machined bearing surface ensuring smooth operation Also available with 125 and 200mm jaws Vice Size Jaw Width Max. Jaw Opening Weight Dimensions Part Number 60212 100mm 115mm 11.2kg 342(l) x 188(w) x 138(h)mm 61598440 60214 150mm 175mm 25kg 496(l) x 282(w) x 189(h)mm 61598460 Offset Engineers’ Vice – Super Grade 60197 • Australian designed ‘Offset Advantage’ which allows the user to work on long vertical sections with the full width of the jaws without obstruction from the main body of the vice • Super Grade ductile iron which is guaranteed against breakage • Provides positive grip without springing and are ideal for heavy duty applications • This world class vice which is unique to Dawn is simply the best vice a tradesman can own • Australian made and long lasting • Jaw width: 150mm • Max. jaw opening: 175mm • Weight: 55.5kg • 550(l) x 348(w) x 265(h)mm 61598160 Find Quick Action and T Bar Clamps in the Hand & Cutting Tools section, pages 312–313 Product Code Vice Size Jaw Width Max. Jaw Opening Weight Dimensions Part Number 60205 100mm 115mm 10.5kg 342(l) x 150(w) x 138(h)mm 61598340 60207 150mm 175mm 22.6kg 495(l) x 200(w) x 192(h)mm 61598360 BISHOPS Product Code Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara 119 | | Back to Contents | Back to Index Vices & Pipe Support Stand 4 Workshop, Machinery & Construction Equipment Standard Woodworkers’ Vices Pipe Vice 61202 • Capacity: 1⁄8”–2” • • • • • • • Robust castings Generous jaw area Long life Replaceable nut Corrosion resistant screw and handle Square body for ease of fitting to bench Large diameter slide bars for smooth parallel operation • Provision for attaching wooden liners to protect work pieces • 175mm version also available with ‘peg’ feature 61598545 Product Code Vice Size Jaw Width Max. Jaw Opening Weight Part Number 60241 175mm 225mm 7.8kg 61598604 60242 200mm 225mm 8.4kg 61598606 60243 225mm 300mm 12.6kg 61598608 60244 250mm 300mm 13kg 61598610 Heavy Duty Vee Head Pipe Stand • • • • Folding legs for easy storage Heavy duty ACME thread Pipe capacity: 300mm/12" Weight capacity: 900kg Mechanics Vice • Manufactured from high quality grey iron castings • Very strong with excellent shock absorbing capacity and immense strength under compression • Machined to close tolerances and are designed for smooth operation and reliability • Fully enclosed vice spindle keeps threads protected from contaminants and damage • Long unbreakable malleable iron nut ensures maximum thread surface contact and constant alignment between the body and sliding jaw • Jaws are hardened 45±5HRC • Perfect alignment of main screw and nut reduces wear and gives long trouble-free service Product Code Jaw Width Jaw Opening Weight Part Number BV/F/100 100mm 125mm 9.2kg 61098210 BV/F/150 150mm 175mm 15.7kg 61098215 BV/F/200 200mm 200mm 32kg 61098220 Chain Pipe Vices • • • • • • • • Equipped with machine cut, heat treated, replaceable jaws Can be rapidly tightened to provide a very powerful grip Chain type bottom screw Super grade ductile iron Popular plumbers tool Sturdy, compact design High tensile chain Extra lengths of chain can be added to accommodate larger diameter pipe Tri-Stand with Chain Vice 61200 • Collapsible and stable frame, perfect transportable workbench • Capacity: 1⁄8”–6” • Holes and slots for attaching various tools • Holes for bending of pipes with diameters 3⁄8”, 1⁄2” and 3⁄4” • Screw fixture for 1” pipe to enable overhead support • The vice base overhangs front legs in order to allow the free working movement 64070910 Pipe Support Bracket 60179 • Adjustable height: 750–1,200mm • Weight: 5.0kg Product Code Type Pipe Capacity OD Weight Part Number 60272 C2 65mm 1.8kg 64070510 60273 C4 120mm 4.5kg 64070520 60274 C6 175mm 7.9kg 64070540 Get cutting with Hacksaw Blades in the Hand & Cutting Tools section, page 359 120 75595502 75595500 [email protected] | www.bishopbros.com.pg | | Back to Contents | Back to Index Soil Compaction Information Relative Desirability of Soils as Compacted Fill Gravel Group Symbol Sand GW GP GM GC SW SP SM SC Well graded gravels, gravel sand mixtures, little or no fines Poorly graded gravels, gravel/ sand mixtures, little or no fines Silty gravels, poorly graded gravel, sand, and silt mixtures Clay-like gravels, poorly graded gravel, sand, & clay mixtures Well graded sands, gravelly sands, little or no fines Poorly graded sands, gravelly sands, little or no fines Silty sands, poorly graded sand/silt mixtures Clay-like sands, poorly graded sand/clay mixtures – – 9 10 – – 7 8 Core – – 7 10 – – 5 9 Shell 10 9 – – 8* 7* – – Erosion Resistance 10 9 7 8 5 4* 3* 6 Compacted Earth Lining – – 7 10 – – 6** 9 Seepage Important – – 10 9 – – 8 7 Seepage Not Important 10 8 7 5 9 6 4 3 Fills – Frost Heave Not Possible 10 8 9 6 9 5 5 4 Fills – Frost Heave 10 8 2 6 9 7 10 5 Surfacing 3 – 6 10 7 – 6 2 Soil Type * If Gravelly ** Erosion critical *** Volume change critical – Not appropriate for this type of use Relative Desirability for Various Uses (10= Best; 1= Least Desirable) Homogeneous Embankment Rolled Earth Fill Dams Canal Sections Foundations Roadways Workshop, Machinery & Construction Equipment Soil Compaction Information 4 Information provided as a guideline only. Equipment Applications Material Plate Compactors Reversible Plate Compactors Tamping Rammers Drum Vibratory Rollers Granular Soils 1 2 – 2 Sand & Clay 2 1 2 1 Cohesive Clay – 3 1 3 Asphalt 1 3 – 1 1= Provides optimum performance for most applications. 2= Provides acceptable performance for most applications. 3= Limited performance for most applications. Testing required. Information provided as a guideline only. Jobsite variables can affect machine performance. BISHOPS Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara 121 | | Back to Contents | Back to Index 4 Bricklayers String, Builders Film & Compactors Workshop, Machinery & Construction Equipment Bricklayers String Line Reel LF80 Plate Compactor • 8 strand braided nylon • 100m Colour Part Number White 62522080 Green 62522082 Orange 62522084 Pink 62522086 Builders Film • Polyethylene plastic • 200μm • 2 x 50m 3382 0000 25 • Suitable for compacting thin to medium layers of granular soils, block paving, repair jobs and maintenance work such as driveways, pavements and parking lots • Specially shaped bottom plate • Unique vibration-reduced handle • Stowable handle for easy transportation and storage • Long life V-belt thanks to cooling fan and ventilated cover • Plate width: 420mm • Centrifugal force: 19kN • Power: 4,100W • Speed: 33m/min • Amplitude: 1.3mm • Frequency: 95Hz • Vibration emission value: 1.2m/s2 • Noise level: 103dBA • Operating mass: 82kg 76510124 LG500 Plate Compactor Colour Part Number Black 66030062 Clear 66030064 Fill up your machine with a Fuel Can from page 271 in the General Industrial Products section 76510126 Plate Compactors • • • • • • • • • 122 3382 0000 62 • Designed for compacting medium to deep layers of granular soils, block paving and confined areas such as trenches, parking lots and foundations etc • Hydraulic forward/reverse lever • Hatz engine with low fuel consumption and emissions • Heavy-duty protection frame and impact resistant steel covers protect engine and transmission • High quality bottom plate • 2 x extra 150mm plates fitted • Plate width: 550mm • Centrifugal force: 60kN • Power: 8,200kW • Speed: 24m/min • Amplitude: 2.1mm • Frequency: 60Hz • Vibration emission value: 2.1m/s2 • Noise level: 109dBA • Operating mass: 559kg Plate Compactor WP 2050A • Honda GX 160 petrol air-cooled, single cylinder, 4-cycle engine • Base plate size: 500 x 586mm • Max. rated power: 3.6kW @ 3,600rpm • Max. speed: 3,600rpm • Centrifugal force: 20kN • Vibrating frequency: 97Hz • Max. travel speed: 28m/min • Max. gradability: 30% • Max. compacted area: 840m2/hr • Fuel tank capacity: 3.7ltr • Fuel consumption: 1.8ltr/hr • Weight: 100kg Air-cooled, 4-cycle engine Base plate size: 460 x 610mm Overall dimensions: 1,100 x 460 x 600mm Max. forward travel: 28m/min Max. compacted area: 770m2/hr Max. gradability: 35% Vibration frequency: 116.6Hz (7,000vpm) Centrifugal force: 19.8kN Operating speed: 3,600rpm Product Code Engine Max. Rated Fuel Fuel Tank Operating Displacement Type Power Consumption Capacity Weight Part Number VPH 70 Petrol 163cm3 Honda 4.1kW (5.5hp) 1.27ltr/hr 3.6ltr 77kg 76510120 VPY 70 Diesel 211cm3 Yanmar 3.5kW (4.7hp) 0.96ltr/hr 2.5ltr 90kg 76510122 76510210 [email protected] | www.bishopbros.com.pg | | Back to Contents | Back to Index Compactors & Tamping Rammers 4 • Conveniently placed handles makes them easy to reach • Open design reduces dirt build-up and makes cleaning easier • Air-cooled, 4-cycle, single cylinder MS60-2 MS100-1 • Ideal for sand, gravel and mixer • Powerful design for compaction soils in narrow trenches and along of sand, gravel, grit and foundations, walls and abutments granular materials • Foldable handle for easy • Vibration isolated reversible transportation and stock handle for easy operation and • Radius base plate for easy reduced operator fatigue access to corners • Centrally mounted fully enclosed • Sealed belt cover to protect exiter for an even spread of from sand and soil compactive force over the • Heavy duty shock mounts whole base plate reduce vibration to the • Heavy duty shock mounts upper engine and handle reduce vibration to the upper • Built-in wheels for easy engine and handle transportation MS90-2 • Malleable iron base provides longer life • Easily remove water tank with built-in valve • Rounded base plate for easy access to corners • Located in the centre of the rising bar makes it easier to transport • Timing is protected from sand and dirt • Built-in wheels for easy transportation MS60-2 MS100-1 MS90-2 Product Code Engine Type Power MS60-2 Petrol 168F 4,000W, 4.5hp 62kg Operation Mass Frequency Centrifugal Force Compaction Depth Travel Speed Efficiency Plate Size 5,600vpm 10.5kN 200mm 24m/min 450m2/hr 360 x 500mm 1,080(l) x 400(w) x 800(h)mm 76510365 MS100-1 Diesel Kipor 170 3,100W, 4.2hp 104kg 7,000vpm 19.8kN 300mm 27m/min 770m2/hr 460 x 610mm 1,100(l) x 460(w) x 660(h)mm 76510375 MS90-2 Petrol Loncin MG200 4,800W, 6.5hp 91kg 5,500vpm 13kN 300mm 24m/min 600m2/hr 530 x 500mm 1,100(l) x 830(w) x 500(h)mm 76510385 Reversible Plate Compactor DPU 4045Ye • Yanmar L70N diesel air-cooled, single cylinder, 4-cycle engine • Electric and recoil starter • Base plate size: 460 x 900mm • Centrifugal force: 40kN • Vibration frequency: 69Hz • Max. advance travel: 20m/min • Max. surface capacity: 864m2/hr • Displacement: 320cm3 • Max. power output: 4.9kW @ 3,600rpm, 4.3kW @ 3,000rpm • Fuel tank capacity: 3.3ltr • Fuel consumption: 1.4ltr/hr • Weight: 356kg 76510125 MSH160-1 • Conveniently placed handles makes them easy to reach • Large heavy shock mounts reduce vibration to the handle and upper deck • Wear-resistant base plates extend life and the open design reduces dirt build up • Centrally located lifting bar allows easy transportation in and out of trenches • Wrap around protection cage protects the plate from accidental jobsite damage • Engine type: Diesel Kipor 178 • Power: 4,400W, 6hp • Operation mass: 165kg • Frequency: 4,000vpm • Centrifugal force: 30.5kN • Compaction depth: 500mm • Travel speed: 15m/min • Efficiency: 570m2/hr • Plate size: 730 x 370mm • Dimensions: 860(l) x 570(w) x 930(h)mm BISHOPS Part Number Tamping Rammer BS 60-4S • Wacker Neuson WM 100 gasoline air-cooled, single cylinder, 4-cycle engine • Low oil shut down protection • Shoe size: 280 x 342mm • Stroke: 48mm • Percussion rate: 660bpm • Travel speed: 7.8m/min • Max. area capacity: 132m2/hr • Displacement: 97cm3 • Max. rated power: 2.4kW @ 4,200rpm • Power rating specification: SAE J1995 • Fuel tank capacity: 3ltr • Fuel consumption: 1.2ltr/hr • Weight: 71kg 76560125 Reversible Plate Compactor 76510350 Dimensions Workshop, Machinery & Construction Equipment Plate Compactors Diesel Tamping Rammer DS 70 • Yanmar diesel air-cooled, single cylinder, 4-cycle engine • Shoe size: 280 x 330mm • Stroke: 75mm • Percussion rate: 700bpm • Travel speed: 13m/min • Max. area capacity: 148m2/hr • Displacement: 211cm3 • Max. rated power: 3.1kW @ 3,450rpm • Power rating specification: SAE J1349, ISO 3046-1 IFN • Fuel tank capacity: 4.2ltr • Fuel consumption: 0.9ltr/hr • Weight: 83kg 76560120 Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara 123 | | Back to Contents | Back to Index 4 Tamping Rammers, Rollers & Concrete Mixer Double Drum Vibratory Roller Workshop, Machinery & Construction Equipment Tamping Rammers MDR65L • Suited for more rugged construction site jobs • Fitted with a fully hydraulic drive system • Safe to use due to reversing protection and deadman control • Ergonomically designed handle and controls • Lombardini 15LD440 engine • 8,100W power • Travel speed: 0–3.6km/h • Water tank capacity: 65ltr • Driven by 4-stroke petrol engine designed specifically for rammers • Heavy duty throttle control provides more reliable and longer service • Double built-in filtration system provides cleaner air to engine for longer life and improved durability • Integrated fuel valve for easy starting • Heavy shock mount system to reduce hand-arm vibration and improve operator comfort • Plastic oil tank offers longer life and rust-free • Rammer shoe made of steel plate with wooden insert offers economical usage MR68H • Special protective frame for engine • Specially designed trolley kit for easy transportation • High quality German made polyurethane bellow – more compacting force and offers a reliable lubricating system • Air-cooled, 4-cycle, single cylinder MR75R • Fuel tank capacity: 3.0ltr • Dimensions:430(l) x • Shoe size: 330(l) x 285(w)mm 760(w) x 1,020(h)mm Product Code Engine Type Power MR68H Honda GX100 MR75R Robin EH12-2D Operation Mass Percussion Impact Rate Force Jumping Stroke Part Number 2,200W, 68kg 3hp 650–695/ 13kN min 40–85mm 76560135 3,000W, 75kg 4hp 640–680/ 14kN min 40–80mm 76560130 LT6004 Tamping Rammer 3382 0000 02 • Used for compacting medium to deep layers of cohesive soils, such as clay or silt but also sand and gravel, repairing jobs and in confined areas such as trenches, around pillars and on housing sites • High centrifugal force and speed provide deep and effective compaction • Easy access to all daily service points • Sealed, multi-function tank with throttle control (stop/idle/run) • Honda 4-stroke engine with new carburettor • Patented air breather system for easy start • Efficient shock absorbers • 280mm/11" pad • Force/blow: 14.8kN • Power: 2,200kW • Speed: 15–18m/min • Amplitude: 65–75mm • Frequency: 12Hz • Vibration emission value: 4.9m/s2 • Noise level: 104dBA • Operating mass: 75kg 76560155 MSR58H • Lightweight and manoeuvrable • Ideal for smaller maintenance jobs including work on footpaths, bridges and landscaping areas • Fitted with a fully hydraulic drive system • Safe to use due to reversing protection and deadman control • Ergonomically designed handle and controls • Honda GX160 engine • 4,000W power • Travel speed: 0–1.5km/h • Water tank capacity: 15ltr 124 Double Drum Roller RD 7H-ES • Hatz diesel air-cooled, single-cylinder, four-cycle engine • Displacement: 413cm3 • Fuel consumption: 1.67ltr/min • Drum diameter: 420mm • Side clearance: 235mm • Curb clearance: 30mm • Centrifugal force: 13kN • Frequency: 55Hz • Linear force (static): 5/7.4N/mm (front/rear) • Linear force (dynamic per drum): 10N/mm (front and rear) • Advance travel: 66.7m/min • Reverse travel: 33.3m/min • Max. surface capacity: 2,613m2/hr • Gradability: 40% 76515220 Single Drum Vibratory Roller 76515110 76515210 Electric Concrete Mixer MX10 • Economical, non-maintenance and easy to use mixer • Made with a single piece steel sheet gear ring • Easy to store and transport due to its foldable frame • The large 240mm diameter wheels provide both stability and manoeuvrability • The large drum delivers high quality mixing results • Can be tilted and swivelled in a full 360° rotation for complete discharge • The driving shaft is mounted on a sealed ball bearing providing ease of movement • 250W • Output: 75ltr (2.6cft) • Working dimensions: 1,150(l) x 800(w) x 1,250(h)mm • 100ltr capacity 76505290 [email protected] | www.bishopbros.com.pg | | Back to Contents | Back to Index Concrete Mixers, Concrete Vibrators, Drive Units & Trowel Machine 4 Drive Units • Suitable for small and occasional construction jobs • Ideal for mixing mortar in small volumes • Easy to transport • Cast iron gear ring • 178F hand start diesel engine 76505330 Power Drum Speed Filling Volume Discharge Volume Dimensions Weight Part Number 4–9hp 25–30rpm 260ltr/9.2cft 170ltr 1.90 x 1.17 x 1.42m 313kg 76505320 5.5–9hp 16–20rpm 350ltr/12.3cft 260ltr 1.90 x 1.17 x 1.65m 338kg 76505330 • Robust protective cage • Dish base for ease of use • Rugged, low maintenance design • Overall dimensions: 460 x 460 x 530mm • Max. speed: 2,800rpm YD 3.5: • Displacement: 211cm3 • Fuel tank capacity: 2.5ltr • Fuel consumption: 0.78ltr/hr ED 1.6: • Cast iron coupling housing – no need for springs • Input voltage: 240V • Input current: 9.6amp Product Code Engine Type Power Operating Weight Part Number YD 3.5 Yanmar L48 Diesel 3.5kW (4.7hp) 39kg 76520150 ED 1.6 Electric 1.6kW (2.1hp) 33kg 76520154 Drive Units • • • • • Ezyvibe4 Portable Vibrator EZYVIBE4 • Honda GX 35 petrol air-cooled, 4-stroke, single cylinder engine • Recoil start • Head diameter: 45mm • 1.2kW (1.6hp) • Operating speed: up to 7,500rpm • Max. rated power: 1.2kW @ 7,000rpm • Piston displacement: 35.8cm3 • Power rating specification: SAE J1995 • Fuel tank capacity 0.65ltr • Fuel consumption: 0.6ltr/hr • Weight: 11.5kg To suit concrete vibrator pokers Rubber mounts to reduce vibration 4 cycle, single cylinder Air cooled Recoil start MVD-2 Workshop, Machinery & Construction Equipment Concrete Mixers MVD-4 Product Code Description Part Number MVD-2 Loncin G160F Petrol Engine, 5.5hp, 4.0kW 76520130 MVD-4 Honda GX160 Petrol Engine, 5.5hp, 4.0kW 76520140 76520210 Find Laser Rangefinders and Levels in the Hand & Cutting Tools section, page 350 Concrete Vibrator Pokers • • • • Hard nose 6m flexible shaft Vibrator head length: 442mm Revolution of flexible shaft: 3,000–3,600rpm • Low output speed helps extend the service life of the poker • Is interchangeable between both electrical and petrol or diesel engine drive units Product Code Vibrator Amplitude Approximate Weight Head Dia. Part Number MV32 1mm 11kg 32mm 76590120 MV50 1.3mm 16kg 50mm 76590150 MV70 1.4mm 17kg 70mm 76590160 Concrete Vibrators • For use with Wacker Neuson drive motors • Flexible shaft length: 6m • *Compaction diameter is dependant on concrete consistency Helicopter Trowel Machine • Low maintenance and long-life design • Ideal 36” diameter trowel for running pans, combination blade or finishing blades • Over-built gearbox provides long service life • Heavy weight design to assure a superior finish • Height adjustable handle gives operator comfort and easy control • Lifting tube as standard feature allows trowel to be transported on the job-site with only two people • Centrifugal safety switch shuts the engine down in the event of the operator losing control of the unit • Screw control ensures precise blade adjustment • Air-cooled, 4-cycle, single cylinder • Honda GX160 petrol engine • 4,800W, 6.5hp • Operation mass: 91kg • Rotor diameter: 910mm • Guard diameter: 940mm Product Code Head Dia. Vibrations Effective Compaction Dia.* Weight Part Number Product Code Description Part Number FWP 40/6 40mm 12,000/min 800mm 18kg 76590200 MT36-2 Helicopter Trowel Machine 76580180 FWP 57/6 57mm 12,700/min 1,000mm 23kg 76590210 MT36-2 BLADE Trowel Blade to Suit Masalta MT36 BISHOPS 76595190 Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara 125 | | Back to Contents | Back to Index 4 Trowel, Screeds & Floats Workshop, Machinery & Construction Equipment Edging Power Trowel MT24-4 • Low maintenance and long-life design • Economical solution for trowelling small surfaces, edges and corners • Independent rotating flywheel, allowing operation in tight corners and in confined spaces • Foldable handle for easy transportation and storage • Lifting hook available as standard • Over-built gearbox assures long service life • Heavy weight design to assure a suitable finish • Height adjustable handle, with optional deadman switch, provides operator with comfort and easy control • Centrifugal safety switch shuts the engine down in the event of the operator losing control of the unit • Screw control ensures precise blade adjustment • Throttle control is available • Honda GX160 petrol engine • 4,000W, 5.5hp • Operation mass: 63kg • Rotor diameter: 610mm • Guard diameter: 610mm Concreting Screeds • Clamp on style handle fixed with level bubble, which may be reversed to the working face for second use • Fitted with end plugs and power coated for easy clean-up Product Code Length Part Number SC18 1,800mm 63578100 SC36 3,500mm 63578120 Aluminium Bullfloats • • • • 76580170 Ideal for floating large areas of concrete Fitted with an aluminium blade and a double rib construction providing extra strength The float is properly balanced and long wearing The bracket assembly included is compatible with all standard threaded handles Product Code Description Size Part Number AB9 Aluminium Bullfloat 900mm 63578160 AB15 Aluminium Bullfloat 1,500mm 63578162 H076 Telescopic Handle 2.4–4.8m 63578164 Magnesium Float Find all your painting and building needs in the General Industrial Products section from page 235 H252 • Floats help in preparing a surface for trowelling or creating a rough finish • Cast from magnesium and recommended for use with air-entrained concrete • The handle is attached with secure torque pad screws and its design provides more knuckle clearance for the user • Perfectly balanced with a broken-in design • 84(w) x 510(l)mm Wet Screeds • Extremely mobile device concept • Easy to operate • Encapsulated eccentric casing to protect against dirt, concrete and splash water 63578262 Wood Floats • Floats help in preparing a surface for trowelling or creating a rough finish • Constructed from clear, seasoned wood • Typically used for levelling out concrete before the final finishing stage 126 Product Code Description Part Number Product Code Size Part Number P35A Power Unit – Honda 4 Stroke 76590300 H801 112(w) x 300(l)mm 63578220 SB-8F Screed Bar – 2,400 x 124mm 76590305 H802 112(w) x 380(l)mm 63578222 SB-12F Screed Bar – 3,700 x 124mm 76590310 H824 65(w) x 600(l)mm 63578226 [email protected] | www.bishopbros.com.pg | | Back to Contents | Back to Index Trowels, Power Pack & Demolition Breakers 4 Stainless Steel Vee Jointer Hydraulic Breaker & Power Pack 63578275 Stainless Steel Edgers • Sturdy steel mounting • Used to produce a radius at the edge of a concrete slab to help prevent the edge from chipping off • Specially designed handle provides a soft feel which reduces fatigue and offers excellent durability Workshop, Machinery & Construction Equipment Hydraulic Breaker • Low vibration handle mechanism • High blow energy and frequency for high productivity • Unique return blow action • Progressive starting ‘feathering’ MB20/20 action allows the user to accurately place the tool and mark out before engaging full power • Economical to operate and simple to maintain • Can be used safely with alternative power sources such as excavators, skid steer loaders and road rollers • 1,600bpm • Flow: 20ltr/min • Pressure: 98–138bar • Weight: 20kg Hydraulic Power Pack • Power on demand, even better fuel economy, reduces exhaust emissions • Oil level sight gauge • Tough steel cover, stronger protection • Extra heavy duty steel sub frame • Wheels and folding handle, easy on site transport • Honda GX270 petrol engine • 9hp • Flow: 20ltr/min • Pressure: 138bar • Weight: 65kg H301S • Used to form ‘dummy’ joints in concrete paving • Joint in the concrete reduces the thickness of the paving and if cracking occurs, the crack should be at the line of the joint • Constructed from long wearing steel • Specially designed handle with resilient comfort grips to help reduce fatigue • Blade: 75(w) x 10(d)mm MHP9/20 Product Code Blade Size Part Number Product Code Description Part Number H403S 10mm Radius 140(l) x 75(w) x 19(h)mm 63578265 MB20/20 Hydraulic Breaker 76560138 H414S 45° Angle 125(l) x 25(bevel)mm 63578272 MHP9/20 Hydraulic Power Pack 76560139 Trowels TEX 32PS Pneumatic Demolition Breaker • Shaped and tempered from the highest grade spring steel • The ergonomic handle is comfortable, reduces fatigue and is very durable • The mounting is made from an aluminium alloy making it lightweight but still very strong Pointed Square 8461 0227 03 • Suitable for general demolition in medium and hard materials such as asphalt and concrete • Two handles for greater control • Noise reduction • Rotating air inlet swivel • Integrated lubricator • Air cushioned piston • Air consumption: 34ltr/s • Impact rate: 1,200bpm • Noise level: 111dBA • Bore: 48mm • Stroke: 155mm • Length (without chisel): 745mm • Weight: 34kg 3083 3274 00 3083 3271 00 Product Code Description Gauge Size Part Number H101 Pointed Trowel Light 120(w) x 365(l)mm 63578202 H109S Pointed Trowel – Stainless Steel Light 100(w) x 355(l)mm 63578208 Product Code Description Size Part Number H191S Pointed Trowel – Stainless Steel Light 115(w) x 405(l)mm 63578210 8461 0227 03 TEX 32PS Pneumatic Demolition Breaker – 76590540 H102 Square Trowel Light 120(w) x 280(l)mm 63578214 3083 3274 00 Narrow Hex Chisel to Suit TEX 32PS 28 x 160mm 76590545 H162 Square Trowel Heavy 120(w) x 280(l)mm 63578216 3083 3271 00 Moil Point Chisel to Suit TEX 32PS 28 x 160mm 76590550 Keep safe with Earmuffs, Earplugs and Dust Masks in the Safety Equipment & Consumables section, pages 38–42 BISHOPS Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara 127 | | Back to Contents | Back to Index 4 Demolition Breakers & Hammers Workshop, Machinery & Construction Equipment TEX 230PE Pneumatic Demolition Breaker 8461 0225 34 • Suitable for service jobs and general demolition • For use in soft and medium material • Two handles for greater control • Solid Body concept • Noise reduction • HAPS™ Hand and Arm Protection System (PE series) • SOFSTART™ two-step trigger • Rotating air inlet swivel • Integrated lubricator • Air cushioned piston • Shank size: 28 x 160mm • Air consumption: 30ltr/s • Impact rate: 1,320bpm • Noise level: 106dBA • Bore: 44mm • Stroke: 140mm • Length (without chisel): 670mm • Weight: 27kg 76590541 GSH16-30 • Extremely high material removal rate – up to 13t per day • Long lifetime due to robust design and high quality material construction • Vibration control allows longer operating time • Trolley is supplied as standard for easy and convenient transportation • Excellent handling thanks to the large handle • The perfectly positioned on/off switch prevents the tool from being switched off unintentionally • Rated power input: 1,750W • Impact energy: 45J • Impact rate at rated speed: 1,300bpm • 760(l) x 255(w)mm • Weight: 16.5kg 75008095 Cobra Combi Petrol Drill & Breaker 8318 0800 08 • Self-contained breaker and drill with single cylinder, 2-stroke engine • Used for drilling and splitting rocks, breaking concrete, cutting asphalt, tamping, compacting, driving spikes, tubes, poles, ground rods, probes and digging ditches and holes • Can sink holes to depth of 2m and drill up to 30cm/min into solid granite • Two handles for greater control • Easy to transport and quick set-up time • HAPS™ Hand and Arm Protection System • Low noise and emissions • Shank size: 22 x 108mm • Power: 2,000W • Fuel consumption: 1.3–1.5ltr/hr • Max impact rate: 2,700bpm • Drill rotation speed: 250rpm • Noise level: 108dBA • Width across handles: 585mm • Size (without chisel): 732(l) x 281(d)mm • Weight: 25kg 76540140 Petrol Breaker Demolition Hammer – 1,750W Demolition Hammer – 1,900W GSH 27 VC • High material removal rate due to impact force of 69J • Very low vibration (only 8m/s²) thanks to the decoupled handles and the vibration-reduced hammer mechanism – for a longer trigger time per day • Extended lifetime thanks to high-quality aluminium and steel components • Ergonomic handles with soft grip and a low centre of gravity allow optimum handling • Anti-slip surface prevents the tool from falling over • Rated power input: 1,900W • Impact energy: 69J • Impact rate at rated speed: 1,000bpm • Weight: 29.5kg 75008100 BH 65 • Wacker Neuson WM 80 gasoline air-cooled, single cylinder, 2-cycle engine • Single stroke impact energy: 65J • Percussion rate: 1,250bpm • 4.6m/s² hand-arm vibrations • Displacement: 80cm3 • Operating performance: 1.7kW (2.31hp) • Max. speed: 4,100rpm • Fuel tank capacity: 1.8ltr • Fuel consumption: 1.1ltr/hr • Weight: 25kg Demolition Hammer SDS-Max • 12 chisel position settings for convenience • Constant electronic capabilities GSH 5 CE 76540120 128 Product Code Rated Power Input Impact Energy Impact Rate Weight Part Number GSH 5 CE 1,150W 2–13J 1,300–2,900bpm 6.2kg 75008092 GSH 11 E 1,500W 6–25J 900–1,890bpm 75008090 [email protected] | www.bishopbros.com.pg 10.1kg | | Back to Contents | Back to Index Breakers, Demolition Hammers & Cut-Off Saws 7 Piece Air Hammer Set 8461 0219 00 • Suitable for light-duty chipping, scaling, renovation, conversion work and demolition • D-shape handle with airline attachment • Noise reduction • Air cushioned piston • Air consumption: 9.5ltr/s • Impact rate: 2,760bpm • Noise level: 104dBA • Bore: 28mm • Stroke: 45.7mm • Length (without chisel): 380mm • Weight: 5.5kg • Alloyed steel cylinder and piston improves the lifetime of the product • Round shank • Shank opening: 10.2mm • 3,200bpm • Avg. air consumption: 4.0cfm (113ltr/min) • Air pressure: 90psi (6.3bar) • Air hose: 3⁄8" • Sound pressure: 98dBA • Overall length: 175mm • Weight: 1.7kg Includes: • 1 x air hammer • 5 piece chisel kit • 1 x spring retainer 73610030 350mm Portable Cut-Off Saw Product Code Description Size Part Number 8461 0219 00 TEX 05P Pneumatic Chipping Hammer – 76590500 3083 3222 00 Narrow Hex Chisel to Suit TEX 05P 19 x 52mm 76590505 TEX 12PS Pneumatic Pick Hammer 8461 0211 13 • Used for light-duty chipping, scaling, renovation, conversion work and demolition • SOFSTART™ two-step trigger • D-shape handle with airline attachment • Noise reduction • Air cushioned piston • Cap type tool retainer • Air consumption: 21.3ltr/s • Impact rate: 1,600bpm • Noise level: 105dBA • Length (without chisel): 550mm • Weight: 10.5kg 76570220 TS 420 350mm Cutquik® Cut-Off Saw Product Code Description Size Part Number 8461 0211 13 TEX 12PS Pneumatic Pick Hammer – 76590520 3083 3244 00 Narrow Hex Chisel to Suit TEX 12PS 22 x 82.5mm 76590525 3083 3242 00 Moil Point Hex Chisel to Suit TEX 12PS 22 x 82.5mm 76590530 Chipping Hammer CH-24 • Straight design is suitable for narrow and deep applications • Chisel lock retains chisels securely • High strength piston allows trouble-free operation • Straight, curved flat and flat chisels available • Chisel chuck/shank size: 12.7mm2 • Strokes/min: 4,000 • Inlet: 3⁄8” ID • Weight: 1.7kg 73610112 BISHOPS BTS 635 • Petrol air-cooled, two-cycle engine • Unique long-term air filter system • High torque increases cutting performance • Comes complete with water kit • Arbor diameter: 25.4mm • Max. cutting depth: 128mm • Displacement: 85.8cm3 • Power output: 4.3kW • Weight: 11.3kg Workshop, Machinery & Construction Equipment TEX 05P Pneumatic Chipping Hammer 4 TS 420 • Compact and robust 3.2kW cut-off saw with a 350mm cutting wheel for use on all types of jobs • The innovative long-life air filter system with cyclone air routing ensures an extremely long filter service life and increases service intervals • Can be operated by hand or together with an FW 20 cart • STIHL 2-MIX engine features an advanced stratified charge system that boosts power • Long-life air filter system with cyclone air routing • Anti-vibration system • Manual fuel pump • Decompression valve • Ergonomic grip position • Compensator – controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged • Cut-off wheel: 350mm • Displacement: 66.7cc • Power output: 3.2kW/4.4bhp • Weight (without fuel and blade): 9.6kg 76570208 Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara 129 | | Back to Contents | Back to Index 4 Cut-Off Saws, Floor Saws, Band Saws & Lighting Towers Workshop, Machinery & Construction Equipment TS 800 400mm Cutquik® Cut-Off Saw Band Saw TS 800 • Powerful 5.0kW cut-off saw for 400 or 416mm cutting wheels • Suitable for cutting metal, concrete and asphalt in commercial applications • Extremely long filter service life and increased service intervals thanks to innovative long-life air filter system with cyclone air routing • Can be operated by hand or together with an FW 20 cart • STIHL 2-MIX engine features an advanced stratified charge system that boosts power • Long-life air filter system with cyclone air routing • Anti-vibration system • Decompression valve • Ergonomic grip position • ElastoStart reduces the shock caused by the compression of the engine during starting • Manual fuel pump • Compensator – controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged • Cut-off wheel: 400mm • Displacement: 98.5cc • Power output: 5kW/6.7bhp • Weight: 13kg • Saw arc tilting 45° • Automatic switch-off after cutting • 3 cutting speeds • 550W • 240V • Frequency: 50Hz • Cutting capacity at 90° Round: 110mm Square: 100 x 150mm • Cutting capacity at 45° Round: 100mm Square: 85 x 65mm • Blade: 1,640(l) x 0.65(t)mm • 14tpi • Includes: Quick lock vice, work light, stand and coolant system 75510100 Band Saw • • • • • • • • • • • 76570210 Concrete Floor Saws • Whether cutting concrete or asphalt, the reinforced steel box frame design adds strength necessary to reduce vibrations while sawing • Minimising vibrations enhances the performance of the blade and extends the life of the saw • Super-rigid box frame ensures straight cuts while resisting warping and vibration--prolongs saw life; extends blade life • Japanese shaft bearings for long service life • Comfortable grip handles • Easy crank for raising/lowering cutting depth • Hinged front, lift-up blade guard is designed to provide easy blade replacement • Easy remove, rustless poly water tank provides an optimum flow and volume of water to the blade Saw arc tilting 45° Automatic switch-off after cutting 4 cutting speeds 1,100W 415V Frequency: 50Hz Cutting capacity at 90° Round: 180mm Square: 180 x 300mm Cutting capacity at 45° Round: 110mm Square: 110 x 180mm Blade: 2,360(l) x 0.90(t)mm 8tpi Includes: Quick lock vice stand and coolant system 75510200 9m Mobile Lighting Tower • 4 x 1,500W halogen lamps • Super silenced, single phase power generator • 60Hz, 11kVA, 240V • Kubota D1105-E diesel engine • 3 cylinder, 1,800rpm • Fuel tank capacity: 100ltr • Fuel consumption: 5ltr/hr • Protection class IP23 and insulation class H • Ambient temperature: 40°C • Dimensions (folded): 2.9(l) x 1.4(w) x 2.6(h)m • Dimensions (unfolded): 2.9(l) x 2.5(w) x 8.0(h)m Description MF20-2 130 Part Number 9m Lighting Tower 74090614 Accessories to Suit Part Number 1,000W Bulb 74090908 1,500W Bulb 74090910 Winch Cable 74090912 Product Code Description Blade Size Part Number Complete Winch 74090913 MF20-2 188F Petrol Engine 300–350mm 76570250 Projector 74090905 MF14-4 Honda GX160 Petrol Engine 300–350mm 76570260 Glass Lens for Housing 74090907 [email protected] | www.bishopbros.com.pg | | Back to Contents | Back to Index Index A 4 Cleaning – Machines Compactors Air Tools Chipping Hammer........................................................................ 129 Pick Hammer............................................................................... 129 Air Compressors Diesel........................................................................................... 112 Electric................................................................................. 110, 111 Filters................................................................................... 112, 113 Petrol........................................................................................... 112 Portable....................................................................... 110, 111, 112 Air Filter Air Compressor............................................................................ 112 Air Receivers Vertical......................................................................................... 113 Aluminium Floats........................................................................................... 126 Anvil Forged......................................................................................... 116 B Band Saws Electric......................................................................................... 130 Bench Lathes.................................................................................. 114, 115 Vices.................................................................................... 118, 119 Benders Pipe & Tube – Hand Operated.............................................. 116, 117 Pipe & Tube – Hydraulic............................................................... 117 Pipe & Tube – Power Operated............................................ 116, 117 Bracket Pipe Support Stand..................................................................... 120 Breaker Demolition.................................................................................... 127 Bricklayers String Line Reel............................................................................ 122 Builders Film.............................................................................................. 122 Line.............................................................................................. 122 Bullfloats Aluminium.................................................................................... 126 C Plate.................................................................................... 122, 123 Plate - Reversible......................................................................... 123 Compressor – Air Diesel........................................................................................... 112 Electric................................................................................. 110, 111 Petrol........................................................................................... 112 Concreting Bullfloat........................................................................................ 126 Cut-Off Saw......................................................................... 129, 130 Floats........................................................................................... 126 Floor Saw.................................................................................... 130 Jointer.......................................................................................... 127 Mixers.................................................................................. 124, 125 Screeds....................................................................................... 126 Vibrator........................................................................................ 125 Construction Equipment Breakers.............................................................................. 127, 128 Bricklayers String Line Reel.......................................................... 122 Builders Film................................................................................ 122 Chipping Hammer........................................................................ 129 Concrete Mixers................................................................... 124, 125 Concrete Vibrator......................................................................... 125 Cut-Off Saws....................................................................... 129, 130 Demolition Breakers............................................................. 127, 128 Demolition Hammers.................................................................... 128 Drills............................................................................................. 128 Drive Units................................................................................... 125 Drum Rollers................................................................................ 124 Edgers......................................................................................... 127 Floats........................................................................................... 126 Floor Saws................................................................................... 130 Lighting Tower.............................................................................. 130 Plate Compactors................................................................ 122, 123 Rebar Bender/Straightener.......................................................... 116 Screeds....................................................................................... 126 Tamping Rammers............................................................... 123, 124 Trowel Machines.................................................................. 125, 126 Trowels........................................................................................ 127 Vee Jointer................................................................................... 127 Vibratory Rollers........................................................................... 124 Cut-Off Saw Petrol................................................................................... 129, 130 Cutting Tools Band Saws.................................................................................. 130 Cut-Off Saws....................................................................... 129, 130 Floor Saw.................................................................................... 130 Chain D Chipping Demolition Pipe Vice...................................................................................... 120 Hammer – Pneumatic.................................................................. 129 Chisel For Demolition Breaker................................................................. 127 BISHOPS Workshop, Machinery & Construction Equipment Drain Cleaner Kit.......................................................................... 110 Parts Washer....................................................................... 113, 114 Breakers.............................................................................. 127, 128 Breakers – Power Pack................................................................ 127 Hammers..................................................................................... 128 Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara i | | Back to Contents | Back to Index Index 4 Workshop, Machinery & Construction Equipment Diesel Air Compressors.......................................................................... 112 Concrete Mixers........................................................................... 125 Drive Units................................................................................... 125 Generators........................................................................... 107, 108 Plate Compactor.................................................................. 122, 123 Trash Pumps................................................................................ 110 Water Pumps............................................................................... 109 Drain Cleaner Kit................................................................................... 110 Drill Press Vices............................................................................................ 118 Drills Demolition Breaker Combo.......................................................... 128 G Generators Diesel................................................................................... 107, 108 Petrol........................................................................................... 106 Groover Roll.............................................................................................. 117 H Drive Units Hammer Drum Rollers Hand Diesel........................................................................................... 125 Electric......................................................................................... 125 Petrol........................................................................................... 125 Double......................................................................................... 124 Single........................................................................................... 124 Ducting Chipping – Pneumatic.................................................................. 129 Demolition – Electric..................................................................... 128 Pick – Pneumatic......................................................................... 129 Trowels........................................................................................ 127 Handle Telescopic.................................................................................... 126 Tube for Ventilator........................................................................ 113 E Helicopter Trowel Machine.................................................................... 125, 126 Hydraulic Edgers Stainless Steel............................................................................. 127 Electric Air Compressors.................................................................. 110, 111 Concrete Mixer............................................................................ 124 Drive Units................................................................................... 125 Parts Washer Tank....................................................................... 113 Engineers Vices............................................................................................ 119 Extractors Fume Extractor Tube.................................................................... 113 Ventilator...................................................................................... 113 F Demolition Breakers..................................................................... 127 Pipe Bender................................................................................. 117 Press........................................................................................... 116 J Jointer Vee.............................................................................................. 127 L Lathes Bench.................................................................................. 114, 115 Fan Lighting Tower Film M Ventilator...................................................................................... 113 Builders........................................................................................ 122 Filters Compressor......................................................................... 112, 113 Floats Aluminium.................................................................................... Bullfloats...................................................................................... Magnesium.................................................................................. Wood........................................................................................... 126 126 126 126 Floor Saws Concrete...................................................................................... 130 Forged Anvil............................................................................................. 116 Trailer........................................................................................... 130 Machine Vices Hand Operated............................................................................ 118 Mechanics Vices............................................................................................ 120 Metal Bench Lathe........................................................................ 114, 115 Mixers Concrete.............................................................................. 124, 125 Fuel Filter Generators................................................................................... 108 ii [email protected] | www.bishopbros.com.pg | | Back to Contents | Back to Index Index R Offset Rammers Vices............................................................................................ 119 Oil Filter Generator.................................................................................... 108 P Tamping – Diesel.......................................................................... 123 Tamping – Petrol.................................................................. 123, 124 Rebar Bender......................................................................................... 116 Receiver Air – Vertical................................................................................. 113 Recoil Starter Assembly Parts Pumps......................................................................................... 109 Spare – Air Compressor....................................................... 112, 113 Spare – Generator........................................................................ 108 Spare – Lighting Tower................................................................. 130 Spare – Pumps............................................................................ 109 Parts Washers Tanks................................................................................... 113, 114 Petrol Air Compressors.......................................................................... 112 Cut-Off Saw......................................................................... 129, 130 Demolition Breakers..................................................................... 128 Drive Units................................................................................... 125 Floor Saw.................................................................................... 130 Generators................................................................................... 106 Plate Compactor.................................................................. 122, 123 Tamping Rammer......................................................................... 123 Water Pumps............................................................................... 109 Pick Hammer – Pneumatic.................................................................. 129 Pipe Benders............................................................................... 116, 117 Stand........................................................................................... 120 Vices............................................................................................ 120 Plastic Film – Builders............................................................................. 122 Plate Compactors......................................................................... 122, 123 Compactors - Reversible............................................................. 123 Pneumatic Chipping Hammers...................................................................... 129 Demolition Breakers............................................................. 127, 128 Pick Hammer............................................................................... 129 Pointed Trowel Hand............................................................................................ 127 Poker Concrete Vibrator......................................................................... 125 Portable Air Compressors.......................................................... 110, 111, 112 Cut-Off Saws............................................................................... 129 Press Reversible Plate Compactor.......................................................................... 123 Roll Groover........................................................................................ 117 Manual......................................................................................... 117 Rollers Double Drum............................................................................... 124 Vibratory...................................................................................... 124 Rotary Table Horizontal & Vertical..................................................................... 118 Workshop, Machinery & Construction Equipment O 4 S Saws Band............................................................................................ 130 Cut-Off................................................................................. 129, 130 Floor Saw.................................................................................... 130 Screeds Concreting................................................................................... 126 Wet.............................................................................................. 126 Sets Hammer – Air............................................................................... 129 Spare Parts Air Compressor.................................................................... 112, 113 Generator.................................................................................... 108 Lighting Tower.............................................................................. 130 Pumps......................................................................................... 109 Square – Trowel Hand............................................................................................ 127 Stainless Steel Edgers......................................................................................... 127 Vee Jointer................................................................................... 127 Stand Pipe............................................................................................. 120 With Chain Vice............................................................................ 120 String Bricklayers Line............................................................................ 122 Hydraulic...................................................................................... 116 Pumps Submersible................................................................................. Transfer - Diesel Driven................................................................ Trash............................................................................................ Water - Diesel.............................................................................. Water - Petrol............................................................................... BISHOPS 110 109 110 109 109 Submersible Pumps......................................................................................... 110 Pumps – Drive Units..................................................................... 125 Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara iii | | Back to Contents | Back to Index Index Workshop, Machinery & Construction Equipment 4 T W Tables Washers Tamping Rammers Water Pumps Rotary.......................................................................................... 118 Diesel........................................................................................... 123 Petrol................................................................................... 123, 124 Telescopic Handle......................................................................................... 126 Trailer Air Compressor............................................................................ 112 Lighting Tower.............................................................................. 130 Parts.................................................................................... 113, 114 Diesel........................................................................................... Petrol........................................................................................... Recoil Starter Assembly............................................................... Submersible................................................................................. Trash............................................................................................ Wet Screed Concreting................................................................................... 126 Transfer Pumps Wood Trash Pumps Woodworkers Trowel Machines Workshop Equipment Diesel Driven................................................................................ 109 Diesel........................................................................................... 110 Helicopter.................................................................................... 125 Trowels Hand............................................................................................ 127 Machines............................................................................. 125, 126 Tube Benders............................................................................... 116, 117 V Vee Jointer Floats........................................................................................... 126 Vices............................................................................................ 120 Air Compressors.................................................................. 111, 112 Anvil............................................................................................. 116 Benders............................................................................... 116, 117 Cut-Off Saws....................................................................... 129, 130 Generators........................................................................... 106, 107 Hydraulic Press............................................................................ 116 Lathes.................................................................................. 114, 115 Parts Washers...................................................................... 113, 114 Rotary Table................................................................................. 118 Stand........................................................................................... 120 Ventilator...................................................................................... 113 Vices............................................................................ 118, 119, 120 Stainless Steel............................................................................. 127 Ventilator Portable....................................................................................... 113 Tube............................................................................................ 113 Vertical Air Receiver.................................................................................. 113 Vibrators Concrete...................................................................................... 125 Vibratory Rollers Double Drum............................................................................... 124 Single Drum................................................................................. 124 Vices Bench.......................................................................................... Drill Press..................................................................................... Engineers..................................................................................... Machine....................................................................................... Mechanics................................................................................... Pipe............................................................................................. Woodworkers.............................................................................. iv 109 109 109 110 110 119 118 119 118 120 120 120 [email protected] | www.bishopbros.com.pg
© Copyright 2024