1. No category

ONLINE
ONLY
CUSTOM METAL FABRICATOR
401 47th Street
Niagara Falls, New York 14304
AUCTION
FEATURING: Power Shears – up to 3/8" • 300-Ton Press Brake
• Plate Bending Rolls • Welding Positioners – up to 25,000-Lb.
• Seam Welder • Shot Blast System • Webb Offset Machine
• Bridge Cranes • Stake Body Trucks • Tractor Trailer • Flatbed Trailers
• Large Quantity of Steel Plate, Stainless, Aluminum & Scrap Metal!
Webb Mdl. M-4 Offset
Pandjiris Mdl. 12' Seam Welder
1/4" x 12' Niagara Mdl. 10-144 Initial Type Pinch Roll
25,000-Lb. Ransome Mdl. 250P Welding Positioner
To Register For This Auction, Please Visit www.kosterindustries.com
ONLINE BIDDING ENDS: Tuesday, October 28, 2014 at 1:00 p.m. EDT
ONE DAY ONSITE INSPECTION: Monday, October 27 from 8:00 a.m. to 4:00 p.m.
Corporate Office:
40 Daniel Street – Suite 2
Farmingdale, NY 11735
631-454-1766 • Fax: 631-454-1779
Boston Office:
978-474-4442 • Fax:978-474-4673
www.kosterindustries.com • e-mail: [email protected]
ASSOCIATION OF
MACHINERY AND
EQUIPMENT APPRAISERS
Online Bidding Through
PASS THRU SHOT
BLAST SYSTEM
Gutmann 6-Head Approx.
30HP Jet Wheel Shot
Blast System, Type
RZ1500/18, with blast
recovery system, 66" x
24" opening, heavy duty
motorized roller feed in
and out, cabinet controls
1/4" x 12' Niagara Mdl. 812 Power Squaring Shear
Gutmann Type RZ1500/18 6-Head Pass Thru
Shot Blast System
PLATE BENDING ROLLS
1/4" x 12' Niagara Mdl. 10-144
Initial Type Pinch Roll, with
pneumatic drop end, power rear
roll adjustment, S/N: 61225
Approx. 5' x 1/4" Pyramid Type
Bending Roll, with manual drop
end housing
POWER SHEARS
3/8" x 10' HTC Mdl. 375-10A
Hydraulic Plate Shear, with
motorized back gauge, front arm
supports, left squaring arm,
S/N: A99180
1/4" x 12' Niagara Mdl. 812 Power
Squaring Shear, with left squaring
arm, (2) front arm supports,
individual floor-mounted roller
feeds, S/N: 6336
PRESS BRAKE
300-Ton x 10' Best Mdl. C-300-10
Hydraulic Power Press Brake,
with 102" distance between
housings, S/N: C1340381
Assorted Press Brake Dies
WELDING POSITIONERS
Ransome Mdl. 250P 25,000-Lb.
Capacity Welding Positioner,
with 60" diameter work table,
S/N: 6521997
Automated Technologies Approx.
5,000-Lb. Capacity Welding
Positioner, with 42" x 42"
work area, pendant controls
Aronson Mdl. HD25 2,500-Lb.
Capacity Welding Positioner,
with 30" x 30" table, 4-jaw mounted
chuck, pendant controls,
S/N: 63644
Ransome Mdl. 10-8 1,000-Lb.
Capacity Welding Positioner,
with 36" diameter work table,
S/N: 1428855
Ransome Mdl. B-25 Bench Type
250-Lb. Capacity Welding
Positioner, S/N: 111-5906
Online Bidding Through
ONE DAY ONSITE INSPECTION:
Monday, October 27
from 8:00 a.m. to 4:00 p.m.
Automated Technologies
Welding Positioner
PLASMA BURNING
TABLE
K.N. Aronson VP-96
Plasma Plate Burner,
with single torch, Lynx 85
control, Hypertherm Max
100 power supply,
96" x 144" burn table,
S/N: UP91158
WELDING
MANIPULATOR
K.N. Aronson Mdl. VP-96 Plasma Burning Table
Automated Welding
Technologies Welding
Manipulator “As Is”
OFFSET MACHINE
2,500-Lb. Aronson Mdl. HD25
Welding Positioner
SEAM WELDER
Pandjiris Mdl. 12' Seam
Welder, 12' capacity, with
Thermal Arc Arc-Master 351
power supply, rolling track
mounted feed table,
S/N: 600-427
TANK TURNING ROLLS
Approx. 30,000-Lb. Capacity
Tank Turning Roll, with idler
roll, steel wheels
(3) Aronson Approx.
30,000-Lb. Capacity Tank
Turning Rolls, with idler roll,
S/N: 7555
Teledyne Readco Approx.
10-Ton Capacity Tank Turning
Roll, with idler
Webb Mdl. M-4 Offset
Machine Roll,
3/8" capacity, with feed
carriage and guides,
8" wheels, S/N: 8245
BPR Mdl. CP20
Bench Type Angle Roll
ANGLE ROLLS
BPR Mdl. CP20 Bench
Type Angle Roll
Wyatt Metal Boiler
Works 5" x 5" x 5/8"
(Approx.) Vertical
Angle Bending Roll,
with guides and
assorted dies
TUBE BENDER
Ercolina Top-Bender
Hydraulic Pipe Bender,
with microprocessor
control, S/N: 594750
IRONWORKER
Ercolina “Top Bender”
Hydraulic Tube Bender
Buffalo #2-1/2
Ironworker, will shear
1/2", with 4" x 4" x 3/8"
angle, coping and
notching, will punch
up to 1-5/16"
BANDSAWS
Marvel Mdl. 81 Vertical
Bandsaw, with 18" throat,
hydraulic clamping, roller
in and out feed, coolant,
S/N: E-1968
DoAll Mdl. TF2020A 20"
Vertical Bandsaw, with
tilting head, dual hydraulic
clamping, coolant,
S/N: 388-78102
20" DoAll Mdl.
TF2020A Automatic
Vertical Bandsaw
View of Tank Turning Rolls
Wyatt Metal 5" x 5" x
5/8" Vertical Angle Rolls
18" Marvel Mdl. 81
Vertical Bandsaw
<
150HP Sullair
Mdl. LS-20S-150H
Air Compressor
DoAll Mdl. 3610-20 36"
Vertical Bandsaw, with
26" x 26" tilting table,
blade welding attachment,
S/N: 399-82437
AIR COMPRESSOR
Sullair Mdl. LS-20S150H 150HP Rotary
Screw Type
Air Compressor, 115/125
PSIG, S/N: 003-150828
WELDERS & PLASMA CUTTER
Miller Syncrowave 500 AC/DC 500-Amp
Tig Welder, with Bernard chiller
Miller Deltaweld 450 450-Amp Portable
DC Mig Welder, with Miller wire feeder
Miller Syncrowave 351 AC/DC 350-Amp
Tig Welder, with Tweco TC900 chiller,
S/N: KG053312
(2) Miller Syncrowave 300 AC/DC
300-Amp Portable Tig Welders, with
Tweco chiller, S/N: JF899457
< Miller “Syncrowave 351”
wWelder
Miller Syncrowave 351 350-Amp AC/DC
Tig Welder, with Bernard chiller,
S/N: KG060789
Miller Syncrowave 300 AC/DC 300-Amp
Tig Welder, with Pro Cool II chiller,
S/N: JG102103
Miller Dialarc 250 AC/DC 250-Amp
Welder
(6) Thermal Arc Fabstar 4030 400-Amp
DC Mig Welders, with Thermal Arc 2210
wire feeder
CRANES & SPREADER BEAMS
5-Ton Capacity Overhead Bridge Crane, with
Robbins & Meyers 5-ton capacity underslung hoist,
top running bridge, pendant controls, 58' span
Aurora Systems 5-Ton Capacity Overhead Bridge
Crane, with Robbins & Meyers 5-ton underslung
hoist, underslung bridge, pendant controls, approx.
45' span
4-Ton Capacity Overhead Bridge Crane, with C-M
1-1/2-ton underslung hoist, pendant controls,
underslung bridge, approx. 20' span
5-Ton Aurora Systems Overhead Bridge Crane,
with 45' span
1996
Freightliner Diesel Tractor
10,000-Lb. Towmotor Mdl. B-10 Forklift
Lincoln Idealarc TM-300/300 AC/DC
300-Amp Stick Welder
(2) Lincoln Power Mig 350 350-Amp
Portable Mig Welders
Hobart Fabstar 4030 400-Amp
Portable DC Mig Welder, with Hobart
2410 wire feeder
Linde Mdl. SVI-600 600-Amp DC Mig
Welder, with Cobramatic wire feeder
Thermal Dynamics Pak Master 50
Plasma Cutting System
2-Ton Capacity Overhead Bridge Crane, with
C-M 2-ton underslung hoist, top running bridge,
pendant controls, approx. 36' span
2-Ton Capacity Gantry Crane, track-mounted,
approx. 250' of rail, approx. 30' span
(currently apart)
(2) 1-Ton Capacity Jib Arms, with 1-ton
electric hoists
(2) 10-Ton Spreader Beams
(2) 5-Ton Spreader Beams
2006
International Mdl. 4200VT365
Diesel Stake Body Truck
48,050-Lb. Rogers
35' Single Drop Deck
FLATBED TRAILERS
Fruehauf 42' Wood Deck Flatbed
Trailer, with dual rear axles
1999
International Mdl. 4900DT466E
Stake Body Truck
Case Mdl. W-9G Front End Loader
FORKLIFT
Towmotor Mdl. B-10
10,000-Lb. Capacity
Propane-Powered Forklift
Truck, with solid tires, S/N:
781-230
FRONT END LOADER
Case Mdl. W-9G Front End
Loader, with 1/2 yard bucket,
gas-powered engine, S/N:
9803175
ALUMINUM
LOADING DOCK
Magliner Mdl. MG167036
16,000-Lb. Capacity Mobile
Loading Dock, approx. 36'
long, S/N: 12-93-6379
Brown 42' Wood Deck Flatbed Trailer,
with dual rear axles
Simon Mdl. MP40 Platform
Aerial Lift
TRUCKS & TRACTOR
TRAILER
International Mdl. 4200VT365
Diesel Stake Body Truck, with dual
rear tires, 20' wood deck,
VIN: 1HTMPAFL27H458822 (2006)
Freightliner Diesel-Powered
Tractor, with (2) dual rear tires,
VIN: 1FUY3MDB5WL921305 (1996)
International Mdl. 4900DT466E
Diesel-Powered Steel Frame Stake
Body Truck, with (2) dual rear tires,
power tail gate,
VIN: 1HTSHAAR4YH269302 (1999)
(currently not registered)
MANLIFT
Simon Mdl. MP40 Gas-Powered
Manlift, with pneumatic tires,
500-lb. capacity platform lift
Trailmobile 40' Wood Deck Flatbed
Trailer, with (2) dual rear axles, GVWR
58,600-Lb., S/N: K32440 (1973)
Transcraft 40' Wood Deck Flatbed
Stretch Trailer, will open to 60',
with dual rear axles, GVWR 70,000-lb.,
S/N: EW768723 (1969)
Rogers 35' Single Drop Wood Deck
Trailer, with dual rear axles, 48,050-lb.
capacity, S/N: 18422 (1977)
Homemade 35' Double Drop Steel
Frame Trailer
45'L x 14'H x 17'9"W
Blast Booth System
LATHE
Springfield 16" x 60"
Geared Head Engine Lathe,
with 3-jaw chuck, steady rest,
taper attachment, spindle
speeds 12–630 RPM,
S/N: 54051
BLAST BOOTH SYSTEM
45' Long x 14' High x 17'9" Wide Blast
Booth, explosion proof lighting, track
feed, double door, double chamber
blast pot, reclaim, bucket elevator,
sweeps inside to center screw
STORAGE TRAILERS
(4) Approx. 40' Storage Box Trailers
20' Storage Box Trailer
(5) Assorted Yard Storage Trailers,
30'–40'
CUSTOM METAL FABRICATOR
SENTRY METAL SERVICES | 401 47th Street, Niagara Falls, New York 14304
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT:
18% Buyers Premium will apply on all purchases. Company or personal checks will
be accepted only if accompanied by a letter from the payor’s bank guaranteeing
unqualified payment to Koster Industries, Inc. All checks must be made payable to
the order of Koster Industries, Inc. Direct bank wire transfers to the account of
Koster Industries, Inc. on balances due will be accepted with prior arrangement.
No lot may be removed until complete settlement is made.
IMPORTANT NOTICE: Although information has been obtained from sources deemed
reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to
the accuracy of the information herein contained. It is for this reason that buyers
should avail themselves of the opportunity to make inspection prior to the sale.
All equipment being sold as-is, where-is with no guarantees.
3/8" x 10' HTC Mdl. 375-10A
Hydraulic Plate Shear
AUCTIONEERS • APPRAISERS • LIQUIDATORS
40 Daniel Street, Suite 2, Farmingdale, NY 11735
631-454-1766 • Fax: 631-454-1779
Presorted
First Class Mail
U.S. Postage
PAID
Eugene, Oregon
Permit No. 17
<
300-Ton x 10' Best
Mdl. C-300-10
Hydraulic Brake
MISCELLANEOUS MACHINERY
Heavy Duty Motorized Portable
Scissor Lift Table
(2) Gustin-Bacon Mdl. B Groovers
Ridgid Type 300 Pipe Threader
DeWalt 12" Bench Type Mitre Saw
Ryobi 16" Bench Type Scroll Saw
Delta 10" Table Saw
(2) Cincinnati Combination Grinders/
Sanders, with 12" diameter wheel, 3" belt
Stone 20" Sliding Head Abrasive
Cutoff Saw
50-Ton Capacity Carolina
Mdl. CBP1200 H-Frame Hydraulic
Press, with 28" distance between
uprights, adjustable rail
M-T-M Mdl. 1502 Pressure Washer
Airtek Twin Tower Air Dryer
(2) Phoenix Dry Rod Ovens
Toledo Mdl. 1500 Platform Scale,
with 4' x 4' platform, S/N: 6724
Nederman Portable Dust Collector
Nederman Filter Box Portable
Dust Collector
Dayton Cyclone Type Dust Collector
ONE DAY ONSITE INSPECTION: Monday, October 27
from 8:00 a.m. to 4:00 p.m.
MISCELLANEOUS SHOP SUPPORT
Bosch Mdl. 11244E Hammer Drill, Hilti Mdl. DXA40 Powder
Stamping Gun, Slugger Metal Cutting 7" Electric Circular Saw,
(2) Milwaukee 7-1/4" Electric Circular Saws, (2) Milwaukee
Sawzalls, Milwaukee Electric Portable Bandsaw, DeWalt Electric
Jig Saw, Assorted Electric Hand Drills and Grinders, Assorted
Welding Wire, Safety Harnesses, (3) Assorted Magnetic Base
Drills, Assorted Lifting Chains, Quantity of Assorted C-Clamps,
Assorted Paint Steel Horses, Assorted Electric and Kerosene
Space Heaters, (2) Assorted Circle Burners, Crane Forklift
Attachment, 3,000-lb. capacity, Quantity of 1" and 1/2" Steel
Plate, Layout Work Tables with vises, (2) Assorted Airless Paint
Spray Pumps, Assorted Shackles and Plate Clamps, Assorted
Rolling and Pedestal Fans, Assorted Double End Pedestal
Grinders, Craftsman 15" Floor Type Drill Press, Huskie 10,000
PSI Hydraulic Pump, Assorted Scrap Welders, Haulmaster
5,000-Lb. Capacity Hydraulic Pallet Jack, Dayton 20" Floor Type
Drill Press, HUNDREDS OF LOTS!
DIRECTIONS
RAW & USABLE MATERIAL
Large Quantity of Assorted Steel Plate, Channels,
Pipe, Assorted Stainless Steel, Aluminum Plate
and Pipe, Scrap Steel
*Most Usable Materials Have Certificates!
QS-0023477
From Buffalo Niagara Int’l Airport: Take I-290 W and I-190 N to
US-62 N/Niagara Falls Blvd. in Niagara Falls. Take Exit 22 from
I-190 N, continue straight onto NY-33 W. Take exit onto I-90 E
towards I-290/Niagara Falls/Albany. Take Exit 50 for I-290
towards Niagara Falls. Continue onto I-290 W, take I-190 N exit
towards Niagara Falls. Merge onto I-190 N, take Exit 22 for
US-62/Niagara Falls Blvd. towards airport. Continue on US-62
N/Niagara Falls Blvd. to 47th Street and turn left.
Visit Our Website For Full Terms
& Conditions, Additional Information at
www.kosterindustries.com