1. No category

W
e
N
Böhm Fertigungstechnik GmbH
D-98544 Zella-Mehlis
Böhmstr. 1 (Industriegebiet)
Tel.: +49 (0) 3682/452-0
Fax: +49 (0) 3682/41378
E-Mail: [email protected]
Web: www.boehm-fertigungstechnik.de
Technical Data
2
1
3
4
5
6
7
8
9
10
12
11
13
14
15
16
A
A
12
connected value
14
B
380 V 16 A
C
8
7
25
12
26
D
6 bar approx. 10l/min
19
D
5
16
3513
air consumption
C
approx. 3500W
3464
mean power
approx.
6
3
1466,73
17
28
E
10
9
30
3
4
5
6
7
8
Pos.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
125
126
9
1786
2
H
3152
• approx. 600–1200 glove boxes/8h
B
3652,5
D
L
M
42
10
Allgemeintoleranz Aussenkanten Maßstab
ISO
13715 -0,3
DIN ISO
2768-m-K
mod.
gez.
10.06.2013
11.06.2013
Böhm
1
2
3
4
5
6
7
8
9
10
12
11
14
13
Material
AlMgSi1
St verz.
AlMgSi1
11
Ermisch
Ermisch
1 : 10
F
12
AlMgSi1
A
G
AlMgSi1
AlMgSi1
AlMgSi1
AlMgSi1
AlMgSi1
AlMgSi1
1.4301
AlMgSi1
H
St verz.
St verz.
St verz.
St verz.
Stahl
AlMgSi1
AlMgSi1
Stahl
St verz.
St verz.
AlMgSi1
AlMgSi1
AlMgSi1
AlMgSi1
AlMgSi1
AlMgSi1
B
J
K
C
AlMgSi1
L
St verz.
Gewicht
A1
-
Material
Grundgestell
D
made in Germany
AG
• approx. 7200
compartments for glasses/8h
K
Diese Zeichnung, bzw. dieses Schriftstück ist Eigentum der Firma
C
1502
Böhm Fertigungstechnik Suhl GmbH.
Jede missbräuchliche Weitergabe, Vervielfältigung oder
Verwendung ist nach den gesetzlichen Bestimmungen strafbar.
• approx. 1200–2400
stowing compartments/8h
Ce dessin, respectivment ce document demeure la propriété de
Böhm Fertigungstechnik Suhl GmbH.
Toute cession, copie ou utilisation abusive est punissable
en vertu des dispositions légales applicables.
Fertigungstechnik
Suhl GmbH
15
557-10-00-D
Datei:557-10-00-D.idw
Blatt
1
M
Projekt:
16
Riffelblech zum Betreten des Daches
Our machine is meeting the requirements of all well-known
automobile manufacturers.
E
E
This drawing respectively this document is property of
Böhm Fertigungstechnik Suhl GmbH.
Any wrongful passing on, duplication or utilization
is punishable in accordance whit statutery provisions.
Servicetüren
Schaltschrank
F
G
G
Riffelblech zum Betreten
des Innenraumes
Allgemeintoleranz Aussenkanten Maßstab
DIN ISO
2768-m-K
mod.
gez.
Servicetüren
Böhm
1
2
3
4
5
6
7
8
9
ISO
13715 -0,3
10.06.2013
11.07.2014
10
Ermisch
Wiebeck
1 : 25
Gewicht
A2
-
Material
F
Grundgestell
AG
Böhm Fertigungstechnik Suhl GmbH.
Jede missbräuchliche Weitergabe, Vervielfältigung oder
Verwendung ist nach den gesetzlichen Bestimmungen strafbar.
H
Diese Zeichnung, bzw. dieses Schriftstück ist Eigentum der Firma
F
Böh
m
capacity
This drawing respectively this document is property of
Böhm Fertigungstechnik Suhl GmbH.
Any wrongful passing on, duplication or utilization
is punishable in accordance whit statutery provisions.
J
41
Stückliste
Anz.
Bauteilnummer
Bezeichnung
4 Profil 80x80x1680
3842993133
6 557-10-12
Fußplatte
3 557-10-13
Verkleidung
2 3842529334
Stoßverbinder
1 TS8 8645.500
TS 8 Configurator-TS8
2 557-10-15
Verkleidung
1 557-10-01-00
Tür
1 557-10-02-00
Aufsatz
1 557-10-02-01
Bodenblech
1 557-10-02-02
Bodenblech
1 557-10-02-03
Bodenblech
1 557-10-30-00
Haube
Verkleidung
2 557-10-17
2 557-10-18
Verkleidung
3 557-10-19
Verkleidung
1 557-10-21
Wanne
1 557-10-27
Verkleidung
1 557-10-41-00 Tür
Tür
2 3842501753
HAMMERMUTTER N8
1 557-10-41
Anschlussblech
4 DIN 125 - A 7,4
Unterlegscheibe
2 ISO 4017 - M6 x 25 Sechskantschrauben
2 ISO 4017 - M6 x 16
Sechskantschrauben
3 3842529239
Variofix Verbinder
1 557-10-28
Verkleidung
11 Profil 80x80x1338
3842993133
6 786011
MEGI Maschinenfuß mittel
6 DIN 933 - M16 x 120 Sechskantschraube
18 DIN 934 - M16
Sechskantmutter
5 Profil 80x80x2988
3842993133
3 Profil 80x80x595
3842993133
3 Profil 80x80x845
3842993133
2 Profil 80x80x500
3842993133
2 Profil 80x80x1520
3842993133
3842993133
1 Profil 80x80x576
4 3842530360
WINKEL 80X80
2 Profil 80x80x200
3842993133
60 3842523920
HAMMERSCHRAUBE
60 3842523925
BUNDMUTTER
20 3842530283
HAMMERMUTTER N10 M5
20 ISO 10642 -M5x16
Inbusschraube Senkkopf
3 3842538703
WINKEL R28X38; 8/10
2 3842528738
NUTENSTEIN M6
Böhm
G
approx. 20–45s
775
A
F
Ce dessin, respectivment ce document demeure la propriété de
1
Böhm Fertigungstechnik Suhl GmbH.
Toute cession, copie ou utilisation abusive est punissable
en vertu des dispositions légales applicables.
flocking
cycle net
900mm x 400mm x 500mm
E
11
2
29
part sizes max.
LxHxT
B
13
15
Fertigungstechnik
Suhl GmbH
557-10-00-D
Datei:557-10-00-D Gestell.idw
11
Blatt
1
Projekt:
12
Mobile flocking machine
for finishing of 3D and 2D parts
Mobile flocking machine
for finishing of 3D and 2D parts
... the advantages at a glance:
The flocking process is currently made by hand or in gigantic systems, centrally in production companies which
are far away from the manufacturing site.
In countries such as USA, Africa, Russia etc., where also
German premium manufacturers are producing high-quality cars, the quality standard is not available and therefore causes massive problems.
The new developed machine of the
company Böhm is capsuled and as a
result nearly dust-free. A closed circle is possible as there are no impurities from the outside into the
flock which also reduces rejects as well as the ecological
damage.
The machine only requires a space of
only approx. 10m² which is about
20% compared to a comparable
machine what influences the cost
factor and of course is now making
such a machine mobile and flexible at use.
Additionally a process reliability is guaranteed because
all movements are controlled and monitored.
For the first time the programming is done by a very simple joy stick control.
The quality-effecting parameters of big machines or systems are flowed into this compact machine.
• automatised flocking machine
• flocking3D and 2D parts
• highest quality standard of automised flocking in a compact
machine which can be used flexibly and therefore can save
enormous costs
• as a consequence process reliability can be outsourced
with no risk
• ecological damage will be reduced by an reduction of
rejects from 50 to 5% as well as by an almost dust-free
environment and transport savings • machine integrates all techniques in a compact further
developed form, is automised and can produce nearly
dust-free
• flocking material will be utilised within the process and can
be used repeatedly • no impurities and no sedimentation by encapsulation
• a colour change that required an enormous cleaning effort
in the past is now done within a very short time (about
only 5%)
• machine is small and flexible and can be sold or mobile
rented with technical know-how
•full service and possibility for transfer of machine and
process to part production, therefore save enormous
transport costs
• Advantage for environment: dust-free procution and no
transports