PROGRAMME OVERVIEW WEDNESDAY, OCTOBER 15, 2014 Plenary Lecture 1
PROGRAMME OVERVIEW WEDNESDAY, OCTOBER 15, 2014 Plenary Lecture 1 Time: 08:40 - 09:20 Room: Grand Ballroom B Green Composites: Optimal Design Prof. Richard P. Wool, University of Delaware, USA Chair: Debes Bhattacharyya, New Zealand Plenary Lecture 2 Time: 09:20 - 10:00 Room: Grand Ballroom B Novel Graphene Based Nanostructures and Polymer Nanocomposites Prof. Karl Schulte, Hamburg University of Technology, Germany Chair: Lin Ye, Australia Session 1 P: Nano-reinforcement & CNT 1 Time: 10:30 - 11:50 Room: M4 Session Chair: Debes Bhattacharyya, New Zealand ACCM9-D-003/Keynote Effect of Density of Entanglement Points of Molecular Chains on Mechanical Time: 10:30 - 10:50 Behavior of Nafion Membrane * I. Riku , K. Marui, and K. Mimura Osaka Prefecture University, Japan ACCM9-P-028 Time: 10:50 - 11:10 Tribological Behavior of Polymer Nanocomposites under Boundary Lubrication Conditions * G. Zhang , and B. Wetzel Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China Institute for Composites Materials, Germany ACCM9-P-002 Time: 11:10 - 11:30 Processing-structure-property Relationship for Electrospun Polylactic Acid (PLA)/Halloysite Nanotube (HNT) Composite Mats * Y. Dong , J. Marshall, and H. J. Haroosh Curtin University, Australia ACCM9-P-001 Time: 11:30 - 11:50 Mechanical and Interfacial Evaluation of Carbon Fiber Reinforced CNT-Epoxy Composites for High Temperature Application Z. J. Wang, D. J. Kwon, J. Y. Choi, P. S. Shin, J. W. Yi, J. H. Byun, H. I. Lee, J. K. Park, * and J. M. Park Gyeongsang National University, Republic of Korea Korea Institute of Materials Science, Republic of Korea Agency for Defense Development, Republic of Korea PROGRAMME OVERVIEW Session 2 C: Carbon & Ceramic Martrix Composites Time: 10:30 - 11:50 Room: M1 Session Chair: Chen-Chi M. Ma, Taiwan ACCM9-P-022 Mechanical Behaviour of Nanostructured Carbon Materials based Macroscopic Time: 10:30 - 10:50 Architectures * L. Q. Liu , Z. H. Dai, J. Kuang, and Z. Zhang National Center for Nanoscience and Technology, China University of Chinese Academy of Science, China ACCM9-C-001 Time: 10:50 - 11:10 Maximization of Natural Frequencies for Composite Laminated Plate with Rigid Body * T. Funamizu , S. Honda, and Y. Narita Hokkaido University, Japan ACCM9-C-002 Time: 11:10 - 11:30 A Non-linear Binary Model to Predict Mechanical Behaviour of Plain Weave Ceramic Matrix Composites * M. M. Chen, D.X. Zhang , and D. R. Hayhurst Shanghai Jiao Tong University, China The University of Manchester, U.K ACCM9-C-004 Time: 11:30 - 11:50 A Study on Glass Knitted Fabric Composites with PUD Surface Treatment * S. Tang , J. Wang, Y. Yang, and H. Hamada Kyoto Institute of Technology, Japan Dong Hua University, China Session 3 Q: Fibers & Green Composites 1 Time: 10:30 - 11:50 Room: M2 Session Chair: Hao Wang, Australia ACCM9-Q-011 Comparative Study of Surface Modification for Ramie Reinforced Poly(lactic acid) Time: 10:30 - 10:50 Composites * T. Yu, and Y. Li Tongji University, China ACCM9-Q-010 Time: 10:50 - 11:10 Relationship Between Rotation Behavior and Mechanical Properties of a Multi-cell Structure Natural Fiber * Y. Nitta, and K. Goda Yamaguchi University, Japan ACCM9-S-016 Time: 11:10 - 11:30 A Calculation Approach of Discrete Point Curvature for Fibre Placement of Composites * Y. J. Zhu , and Z. S. Li Tongji University, China ACCM9-Q-009 Time: 11:30 - 11:50 Improving the Interlaminar Fracture Toughness of Natural Fiber Reinforced Composites with Chopped Natural Fibers * Y. Li , and D. Wang Tongji University, China PROGRAMME OVERVIEW Session 4 G: Fracture, Fatigue & Damage Mechanics 1 Time: 10:30 - 11:50 Room: M3 Session Chair: Lin Ye, Australia ACCM9-G-014-1/Keynote Mode I Interlaminar Fracture Toughness of Hot Needle Punched CFRTP * Time: 10:30 - 10:50 K. Obunai , T. Fukuta, K. Ozaki, and Y. Morikawa Okayama prefectural University, Japan ACCM9-G-013 Time: 10:50 - 11:10 Micromechanical Failure Analysis of Fiber Reinforced Composite Laminates Subjected to Quasi-static Indentation * L. Yang , Z. J. Wu, and Y. Yan Dalian University of Technology, China Beihang University, China ACCM9-G-011 Time: 11:10 - 11:30 Investigating Flaw Tolerance of CFRP Scarf Joints Using Cohesive Zone Modelling * J. M. Hayes-Griss, A. J. Gunnion, and A. Afaghi Khatibi RMIT University, Australia Cooperative Research Centre for Advanced Composite Structures, Australia Advanced Composite Structures Australia, Australia ACCM9-G-004 Time: 11:30 - 11:50 The Effect of Support Span Length on Failure Behavior of Aircraft Sandwich Panels under Bending Load * Haftirman , K. S. Basaruddin, A. S. Abdul Rahman, and M. S. Fartini Universiti Malaysia Perlis, Malaysia Session 5 A: Active & Passive Health Monitoring 1 Time: 10:30 - 11:50 Room: M6 Session Chair: Qing-Qing Ni, Japan ACCM9-A-010-1/Keynote Composite Overwrap Repair SHMS for OGP Pipelines * Time: 10:30 - 10:50 R. Sweeting , A. Y. L. Leong, A. Gunnion, and K. H. Leong Advanced Composite Structures Australia Pty Ltd., Australia Cooperative Research Centre for Advanced Composite Structures, Australia PETRONAS Research Sdn Bhd, Malaysia ACCM9-A-004 Time: 10:50 - 11:10 Evaluation of Thermoelectric Properties of Fiber-reinforced Multifunctional Composites * M. S. Kim , Y. B. Park, and H. W. Park UNIST, Republic of Korea ACCM9-A-010-2 Time: 11:10 - 11:30 Dynamic Measurement of Young's Modulus of CFRTP by Vibration * X. Lyu , J. Takahashi, and I. Ohsawa The University of Tokyo, Japan ACCM9-A-006 Time: 11:30 - 11:50 Failure Response of Fiber-epoxy Unidirectional Laminate under Transverse Tensile/Compressive Loading Using Finite-volume Micromechanics * Z. W. Tang , B. M. Zhang, and Y. L. Yu Beihang University, China PROGRAMME OVERVIEW Session 6 P: Nano-reinforcement & CNT 2 Time: 13:30 - 15:10 Room: M4 Session Chair: Xiaozhi Hu, Australia ACCM9-P-025 Influence of CNT Nanoweb Interlays on the Mode I Delamination Resistance of Time: 13:30 – 13:50 Composite Laminates * L. Liu , Q. X. Yang, and L. L. Shen Tongji University, China ACCM9-P-036 Time: 13:50 – 14:10 Preparation and Characterization of Biodegradable Polylactic Acid Nano Films * M. X. Li, S. H. Kim, D. S. Lee, and W. I. Lee Seoul National University, Republic of Korea ACCM9-P-050 Time: 14:10 – 14:30 Mechanical and Thermal Properties of PEEK/Modified HNT Nanocomposites * E. Cakicioglu, H. G. Li, and J. Tao Nanjing University of Aeronautics and Astronautics, China ACCM9-K-002 Time: 14:30 – 14:50 Effect and Comparison of Polyurethane Surface Treatment on Two Kinds of Basalt Fiber Composite * T. Yang , Z. J. Cui, J. H. Yang, Y. Q. Yang, and H. Hamada Kyoto Institute of Technology, Japan Donghua University, China ACCM9-P-033-1 Time: 14:50 – 15:10 Mechanical and Tribological Performance of CNT Buckypaper Reinforced Epoxy Composites * * J. H. Han, H. Zhang , and Z. Zhang National Center for Nanoscience and Technology, China University of Chinese Academy of Sciences, China Session 7 S: Processing & Manufacturing Technologies 1 Time: 13:30 - 15:10 Room: M1 Session Chair: Yan Li, China ACCM9-S-001/Keynote Prediction of Axial Permeability of Continuous Fibre Preforms of Dual-scale Time: 13:30 – 13:50 Structures * D. H. Shou, and L. Ye The University of Sydney, Australia ACCM9-S-005 Time: 13:50 – 14:10 3D Printing of Continuous Carbon Fiber Reinforced Plastics * R. Matsuzaki , M. Namiki, M. Ueda, A. Todoroki, and Y. Hirano Tokyo University of Science, Japan Nihon University, Japan Tokyo Institute of Technology, Japan Japan Aerospace Exploration Agency, Japan ACCM9-S-015-1 Time: 14:10 – 14:30 Poly(4-Hydroxybenzoic acid) Reinforced Polyesterimide Composites * Q. B. Guan, S. J. Picken, B. Norder, and T. J. Dingemans Delft University of Technology, The Netherlands ACCM9-S-010 Time: 14:30 – 14:50 Analysis of the Flowability of Glass Fiber Reinforced Composites In a MicroInjection Molding * S. H. Hwang, D. J. Lee, Y. S. Song, and J. R. Youn Seoul National University, Republic of Korea Dankook University, Republic of Korea PROGRAMME OVERVIEW ACCM9-S-009 Time: 14:50 – 15:10 A Novel Technology for Processing Nanofibers and Fabrication of Cylindrical Pipe Composed of Nanofiber Structures * J. Choi, S. Lyu, S. Qin, Q. Xu, P. Qiao, Z. Shan, and W. Hwang Pohang University of Science and Technology, Republic of Korea China Academy of Machinery Science & Technology, China Session 8 U: Smart Materials/Structures Time: 13:30 - 15:10 Room: M2 Session Chair: Mingqiu Zhang, China ACCM9-W-002/Keynote The State-of-art on Innovative Fiber Composite Structures in Civil Engineering in Time: 13:30 – 13:50 China * W. Q. Liu , L. Wang , H. Fang, L. Wan, Y. Fang, Y. J. Qi, and R. L. Huo Nanjing Tech University, China ACCM9-N-025 Time: 13:50 – 14:10 Stress-responsive Waterborne Polyurethane with Shape Memory Properties * Q. H. Zhang, Y. K. Wang, C. Xing, K. Xi, and X. D. Jia Nanjing University, China ACCM9-T-003 Time: 14:10 – 14:30 Vibration Analysis of the Passive Constrained Layer Damping Plate by using Zigzag Theory * T. Kumagai , S. Honda, and Y. Narita Hokkaido University, Japan ACCM9-U-008-1 Time: 14:30 – 14:50 Templated Nanocomposite Hydrogels with Different Hydrophilic Segment Length Comparison of Morphology and Swelling Behaviour * P. F. Liu, Z. Peng, W. J. Gao, and Q. S. Zhang Tianjin Polytechnic University,China Beijing Institute of Technology, China ACCM9-U-004 Time: 14:50 – 15:10 Design and Manufacturing of Composite Smart Structure with Frequency Selective Surfaces * J. H. Jeong, J. Y. Kim, P. Qiao, Z. Shan, and W. Hwang Pohang University of Science and Technology, Republic of Korea China Academy of Machinery Science & Technology, China Session 9 H: Impact & Dynamic Response 1 Time: 13:30 - 15:10 Room: M3 Session Chair: Koichi Goda, Japan; Li Li, China ACCM9-H-020/Keynote Research on High-performance Glass Fiber * Time: 13:30 – 13:50 Q. Zu Sinoma Science & Technology Co.,ltd., China ACCM9-H-011 Time: 13:50 – 14:10 Scaling Effect on the Low Velocity Impact Response of the Unidirectional Glass Fibre Composite Structures * Y. O. Shen, F. J. Yang, W. J. Cantwell, and Y. Li Tongji University, China University of Liverpool, The United Kingdom ACCM9-H-010 Time: 14:10 – 14:30 Dynamic Response of Step-formed Functionally Graded Beam * Y. H. Lee, and J. H. Kim Seoul National University, Republic of Korea PROGRAMME OVERVIEW ACCM9-H-005 Time: 14:30 – 14:50 Effect of Bias, Hoop and Straight Layers on Vibration Characteristics of CFRP Circular Shafts * K. Takeno , S. Honda, T. Nakamura, M. Wakabayashi, and Y. Narita Hokkaido University, Japan Fujikura Rubber Ltd., Japan ACCM9-T-004 Time: 14:50 – 15:10 Low-Velocity Impact of Through Thickness Polymer Column-Foam Core Sandwich Panel * S. M. S. Azwan, M. Y. Yahya , B. Abdi, and A. Ayob Universiti Teknologi Malaysia, Malaysia Session 10 N: Multi-functional Composites 1 Time: 13:30 - 15:10 Room: M6 Session Chair: Jung-Il Song, Republic of Korea; Wenhong Ruan, China ACCM9-P-005/Keynote Composite Delamination Toughening Using Nano-Fillers * Time: 13:30 – 13:50 H. Y. Liu , X. S. Du , F. Xu, and Y. W. Mai The University of Sydney, Sydney, Australia Northwestern Polytechnical University, China ACCM9-N-015 Time: 13:50 – 14:10 Preparation of Shape Memory Polyurethane Foam For Enhanced Thermal Insulation * H. M. Kim, Z. M. Huang, Y. S. Song, and J. R. Youn Seoul National University, Republic of Korea Dankook University, Republic of Korea ACCM9-N-020-1 Time: 14:10 – 14:30 Nanostructured Carbon Materials Based Electrothermal Air Pump Actuators * Q. Liu, L. Liu , and Z. Zhang National Center for Nanoscience and Technology, China University of Chinese Academy of Sciences, China ACCM9-N-001 Time: 14:30 – 14:50 Preparation of Electrically Anisotropic Polyvinyl Alcohol Composite Films by Magnetic Assembly of Fe3O4 Nanoparticle-coated Ag-nanowires * N. Li, and S. Y. Fu Chinese Academy of Sciences, China University of Chinese Academy of Sciences, China ACCM9-N-009 Time: 14:50 – 15:10 High Performance of Silicon Rubber Nanocomposites with Graphene Network * * J. Kuang, L. Q. Liu , and Z. Zhang National Center for Nanoscience and Technology, China University of Chinese Academy of Sciences, China Session 11 P: Nano-reinforcement & CNT 3 Time: 15:40 - 17:40 Room: M4 Session Chair: Peng-Cheng Ma, China ACCM-P-049/Keynote The Carbon Fiber Composites and Their Applications in Commercial Airplanes * Time: 15:40 – 16:00 J. F. Xu , and Q. F. Yu Beijing Aeronautical Science and Technology Research Institute, China Shanghai Aircraft Design and Research Institute, China PROGRAMME OVERVIEW ACCM9-P-040 Time: 16:00 – 16:20 Improved Interfacial Bonding Between Carbon Fibers and Silica Nanoparticledoped Epoxy Matrix * Q. Liu, Z. Y. Jiang , Z. J. Liu, Y. P. Liu, and L. Q. Tang South China University of Technology, China ACCM9-T-011 Time: 16:20 – 16:40 Progress in Carbon Fiber Reinforced Lattice-core Sandwich Structures * H. L. Fan Hohai University, China ACCM9-T-002 Time: 16:40 – 17:00 Numerical and Experimental Studies on Flexibility of Carbon Fiber Sandwich Structures with Honeycomb Filled Grid Core * S. S. Shi, Z. Sun, X. Z. Hu, and H. R. Chen Dalian University of Technology, China University of Western Australia, Australia ACCM9-P-007 Time: 17:00 – 17:20 Effect of Activated Nano-montmorillonite on Barrier Properties of Epoxy-based Composites * J. Y. Zheng, J. M. Zhu, Y. J. Li, X. L. Jia , and X. P. Yang Beijing University of Chemical Technology, China ACCM9-AA-005 Time: 17:20 – 17:40 Mechanical Properties of Basalt Reinforced Composites in Fire * T. Bhat, V. S. Chevali, S. Feih, X. Liu, and A. P. Mouritz RMIT University, Australia Cooperative Research Centre for Advanced Composite Structures Ltd., Australia Advanced Composite Structures Australia Pty Ltd., Australia Session 12 K: Interfaces & Interphases Time: 15:40 - 17:40 Room: M1 Session Chair: Woong-Ryeol Yu, Republic of Korea ACCM9-K-003/Keynote Moisture Effects on The Interfacial Properties of CFRP Composites with Surface Time: 15:40 – 16:00 Treated Fibers * B. Yu, Z. Y. Jiang, and J. L. Yang Nanyang Technological University, Singapore South China University of Technology, China ACCM9-K-005-1 Time: 16:00 – 16:20 Thermoset Composite Assembling by Welding of Thermoplastic Surface Layers: Microstructure and Toughness of The Resulting Thermoplastic/Epoxy Resin Interfaces * Q. Voleppe , C. Bailly, and T. Pardoen Université catholique de Louvain, Belgium ACCM9-K-004 Time: 16:20 – 16:40 The Long-lived PPS/PTFE Amphiphobic Composite Coatings via Simple Spraying * H. Y. Wang , J. Y. Zhao, and Y. J. Zhu Northeast Petroleum University, China ACCM9-I-004 Time: 16:40 – 17:00 Investigation of the Deconsolidation Effect of Carbon Fiber Mat Reinforced Thermoplastics * Y. Wan , and J. Takahashi The University of Tokyo, Japan PROGRAMME OVERVIEW ACCM9-K-008 Time: 17:00 – 17:20 Effects of Maleic Anhydride Concentration on PE Adhesives Peel Strength Performance of 3-Layer PE Pipe Coatings * M. S. F. Samsudin , M. Dell’Olio, K. H. Leong, R. J. Varley, and Z. Ahamid Kawasan Institusi Bangi, Malaysia CSIRO Materials Science and Engineering, Australia ACCM9-K-006 Time: 17:20 – 17:40 Effect of Carbon Fiber Surface Treatment Based Electrostatic Force and Composites Colloid Sizing on the Interfacial Characteristics of PPS Carbon Fiber * S. J. See, S. H. Han, and S. S. Kim Chonbuk National University, Republic of Korea Session 13 Q: Fibers & Green Composites 2 Time: 15:40 - 17:40 Room: M2 Session Chair: Inderdeep Singh, India ACCM9-Q-012/Keynote The Effects of Fibre and Compatibiliser Loadings on the Tensile and Impact Time: 15:40 – 16:00 Properties of Rice Husk/Polyethylene Composites * A. Bilal, R. J. T. Lin , and K. Jayaraman The University of Auckland, New Zealand ACCM9-Q-022-1 Time: 16:00 – 16:20 Relation Between Fiber Waviness and Tensile Properties of Flax Fiber Composites * T. Piyatuchsananon , A. Furuya, and K. Goda Yamaguchi University, Japan ACCM9-Q-003 Time: 16:20 – 16:40 The Investigations of Voids Effects on the Mechanical Properties of Plant Fiber Reinforced Composites * Q. Li, and Y. Li Tongji University, China ACCM9-Q-015 Time: 16:40 – 17:00 Evaluation of Mechanical Properties and FE Analysis of Hybrid Composites Fabricated using Vacuum Infusion Molding Process * * D. W. Lee, Z. H. Li, B. K. Choi , B. S. Kim, and J. I. Song Changwon National University, Republic of Korea Jetkorea Industrial Corporation, Republic of Korea Korea Institute of materials Science, Republic of Korea ACCM9-Q-022-2 Time: 17:00 – 17:20 Interface Property of the Carbon Fiber Treated by Ultralow Temperature * Y. N. Zhang, F. J. Xu , W. Fan , Z. M. Zhang, J. J. Wang, and Y. P. Qiu Donghua University, China ACCM9-P-009 Time: 17:20 – 17:40 Interfacial Shear Strength of Carbon Nanotube Fiber/Polymer Composites by a Micro-droplet Test * Z. J. Yan, Q. S. Yang , and X. Li Beijing University of Technology, China Chinese Academy of Sciences, China PROGRAMME OVERVIEW Session 14 L: Joints & Bearing Behavior Time: 15:40 - 17:40 Room: M3 Session Chair: K. H. Leong, Malaysia; Wenyi Yan, Australia ACCM9-L-002/Keynote Shear Strength of Reinforced Adhesive Joints between Aluminum Plates with Time: 15:40 – 16:00 Different Surface Conditions * Y. X. Bai, S. S. Shi, Z. Sun, X. Z. Hu , and H. R. Chen University of Western Australia, Australia Dalian University of Technology, China ACCM9-L-004 Time: 16:00 – 16:20 Static and Fatigue Strength of Composite Hat-Joints Reinforced by Embossing Stainless Steel Pins * C. H. Kim, D. G. Kim, J. H. Kweon , and J. H. Choi Gyeongsang National University, Republic of Korea ACCM9-L-008 Time: 16:20 – 16:40 Viscoelastic Relaxation in Bolted Composite Joints (Part II: Vibration Damping Response) * Z. Zhang, J. F. Hu, and Y. Xiao Tongji University, China ACCM9-L-012 Time: 16:40 – 17:00 Single Parameter Iterative Formulae for Load Distribution Analysis in Multi-bolt Composite Joints with Tightening Torques and Clearances * F. R. Liu, L. B. Zhao , and J. Y. Zhang Beihang University, China ACCM9-L-007 Time: 17:00 – 17:20 Viscoelastic Relaxation in Bolted Composite Joints (Part I_ Thermal Effects) * R. G. Pei, H. L. Chen, and Y. Xiao Tongji University, China School of Industrial Engineering of Barcelona, Spain ACCM9-L-006 Time: 17:20 – 17:40 Fatigue Performance of Jagged Shaped Metal Pin-Reinforced Composite Single-lap Joints in a Harsh Environment * J. W. Pi, M. G. Ko, J. H. Kweon , and J. H. Choi Gyeongsang National University, Republic of Korea Session 15 N: Multi-functional Composites 2 Time: 15:40 - 17:40 Room: M6 Session Chair: Ryosuke Matsuzaki, Japan ACCM9-N-004 Self-Healable and Remoldable Crosslinked Polymer Based on Disulfide Metathesis Time: 15:40 – 16:00 Reaction * M. Z. Rong , M. Q. Zhang, and Z. Q. Lei Sun Yat-Sen University, China ACCM9-N-019 Time: 16:00 – 16:20 Influence of Multi-functional Chain Extender on Thermal Properties of Polyamide 6 * T. Yu, J. S. Chen, F. M. Wu , and J. Rocks ABB Corporate Research Center, China ABB Corporate Research Center, Switzerland ACCM9-N-020-3 Time: 16:20 – 16:40 Synthesis and Characterization of a Novel Intumescent Flame Retardant bis(4carboxylanilino)phenyl Phosphine Oxide * W. Y. Lv, Y. H. Cui , X .J. Zhang, J. Y. Yuan, and W. Zhang Nanjing University of Aeronautics and Astronautics , China Nanjing LiHan chemical Co., Ltd., China PROGRAMME OVERVIEW ACCM9-N-006 Time: 16:40 – 17:00 Polymer Electrolyte of Graphene Oxide/Polyvinyl Alcohol Nanocomposites for Electric Double Layer Capacitors * Y. F. Huang, W. H. Ruan , P. F. Wu, and M. Q. Zhang Sun Yat-sen University, China ACCM9-N-005 Time: 17:00 – 17:20 Development of Silver/ Titanium Dioxide/ Chitosan Adipate Nanocomposite as an Antibacterial Coating for fruit storage * B. Lin, Y. Luo , B. Zhou, Z. Teng, B. Zhang, and Q. Wang Guangxi University, China Food Quality Laboratory, USA University of Maryland, USA ACCM9-I-005 Time: 17:20 – 17:40 Ionic Liquids as Lubricants for PEEK-on-Steel System in Harsh Operating Conditions * J. Wu, L.W. Mu, P. P. Ye, X. Feng , and X. H. Lu Nanjing Tech University, China Nanjing Institute of Technology, China THURSDAY, OCTOBER 16, 2014 Plenary Lecture 3 Time: 08:30 - 09:10 Room: Grand Ballroom B Optical Fiber Based Structural Health and Process Monitoring of Composite Structures Prof. Nobuo Takeda, The University of Tokyo, Japan Chair: Mingqiu Zhang, China Plenary Lecture 4 Time: 09:10 - 09:50 Room: Grand Ballroom B Hybrid Nanocomposites using Graphene Oxide for Structural and Multifunctional Applications Prof. Byung Sun Kim, University of Science & Technology, Republic of Korea Chair: Chen-Chi M. Ma, Taiwan Session 16 P: Nano-reinforcement & CNT 4 Time: 10:30 - 11:50 Room: M4 Session Chair: Jayantha Epaarachchi, Australia ACCM9-P-004/Keynote Strengthening Polypropylene with Silica Nanoparticles * Time: 10:30 – 10:50 W. H. Ruan, M. H. Wang, M. Z. Rong, L. Ye, and M. Q. Zhang Sun Yat-sen University, China University of Sydney, Australia ACCM9-P-032 Time: 10:50 – 11:10 Mechanical and Electrical Properties of Graphene Aerogel/Epoxy Composites * Z. Y. Wang , X. Shen, X. Y. Lin, Y. Wu, X. Liu, X. Y. Sun, and J. K. Kim The Hong Kong University of Science & Technology, Hong Kong ACCM9-P-014 Time: 11:10 – 11:30 Study on Mechanical Properties and Creep Behavior of Multi-Wall Carbon Nanotubes/Carbon Aerogel/Benzoxazine/Epoxy Carbon Fiber Laminates Composites * H. Lee, T. Y. Chou, G. H. Jiang, and M. C. Yip Tsing Hua University, Taiwan PROGRAMME OVERVIEW ACCM9-P-044 Time: 11:30 – 11:50 Fabrication of Continuous Single Wall Carbon Nanotube-PVA Composite Fiber * G. H. Zhou, Y. Q. Wang, J. H. Byun , S. B. Lee, J. W. Yi, Y. S. Oh, and B. S. Kim Seoul National University, Republic of Korea Session 17 N: Multi-functional Composites 3 Time: 10:30 - 11:50 Room: M1 Session Chair: Shaoyun Fu, China ACCM9-N-014/Keynote Innovation of Functionally Graded Materials with Carbon Nanotubes/Epoxy Resin * Time: 10:30 – 10:50 Q. Q. Ni , Y. Wang, and H. Xia Shinshu University, Japan Zhejiang Sci-Tech University, China ACCM9-N-013 Time: 10:50 – 11:10 Synergistic Effect of Different Filler Particles in APP Flame Retardant for Polypropylene/Kenaf Composites * D. Bhattacharyya , A. D. L. Subasinghe, and R. Das The University of Auckland, New Zealand ACCM9-N-020-2 Time: 11:10 – 11:30 Sound-absorbing Properties of Electrospun Polyvinylidene Fluoride Nanofibrous Membranes * C. M. Wu , and M. H. Chou Taiwan University of Science and Technology, Taiwan ACCM9-N-012 Time: 11:30 – 11:50 An Experimental and Numerical Investigation into the Structural Integrity of Embedded Device Composites * W. J. Qiao, Y. Xiao , L. Zhu, H. S. Fukuda, and H. Hatta Tongji University, China Shanghai Jiao Tong University, China Tokyo University of Science, Japan Japan Aerospace Exploration Agency (JAXA), Japan Session 18 Q: Fibers & Green Composites 3 Time: 10:30 - 11:50 Room: M2 Session Chair: Hong-Yuan Liu, Australia ACCM9-Q-017/Keynote Industrial Hemp: A Sustainable Material for the Future * Time: 10:30 – 10:50 H. Wang University of Southern Queensland, Australia ACCM9-Q-020 Time: 10:50 – 11:10 Analysis and Modelling of Forces in Drilling of Nettle/Epoxy Composite Laminates * K. Debnath , I. Singh, and A. Dvivedi Indian Institute of Technology Roorkee, India ACCM9-Q-004 Time: 11:10 – 11:30 High Performances and Multi-functions of Plant Fiber Reinforced Composites * Y. Li Tongji University, China ACCM9-Q-023 Time: 11:30 – 11:50 Load Transfer Efficiency Measurement of Single Carbon Fiber Reinforced PA 6 Microcomposites with Different Cooling Rates and Annealing Treatments * H. F. Li , T. Zhang, B. M. Zhang, and G. H. Bai Beihang University, China Science and Technology on Space Physics Laboratory, China PROGRAMME OVERVIEW Session 19 A: Active & Passive Health Monitoring 2 Time: 10:30 - 11:50 Room: M3 Session Chair: Nobuhide Uda, Japan ACCM9-A-005/Keynote Magnetic Graphene Foam for Efficient Adsorption of Oil and Organic Solvents * Time: 10:30 – 10:50 S. D. Yang, and P. C. Ma Chinese Academy of Sciences, China ACCM9-A-002 Time: 10:50 – 11:10 Characterizing Mechanical Properties of Polyacrylonitrile Precursor Fibers using Dry-jet Wet Spinning Index * T. Y. Wang , H. C. Chang, Y. T. Chiu, and J. L. Tsai Chiao Tung University, Taiwan Material and Chemical Research Laboratories, Taiwan ACCM9-A-001 Time: 11:10 – 11:30 Damage Sensing of Nanocomposites for Smart Paste Applications * D. J. Kwon, Z. J. Wang, J. Y. Choi, P. S. Shin, and J. M. Park Gyeongsang National University, Republic of Korea ACCM9-A-007 Time: 11:30 – 11:50 High-Resolution Distributed Fiber Optic Sensing System for Composite Structural Health Monitoring * Y. L. Guo, X. Li, and B. M. Zhang Beihang University, China Beijing Institute of Specialized Machinery, China Session 20 G: Fracture, Fatigue & Damage Mechanics 2 Time: 10:30 - 11:50 Room: M6 Session Chair: Jinhao Qiu, China ACCM9-G-005/Keynote Fatigue Damage Evolution and Degradation of the Hybrid CFRP * Time: 10:30 – 10:50 Y. Tanaka , and K. Naito National Institute for Materials Science (NIMS), Japan ACCM9-G-009 Time: 10:50 – 11:10 Fatigue Strengths of the Adhesive Joint with Carbon Nano Tubes * B. N. Lee, J. H. Choi , and J. H. Kweon Gyeongsang National University, Republic of Korea ACCM9-G-008 Time: 11:10 – 11:30 Effect of In-plane Fiber Waviness on Compressive Properties of Quasiunidirectional Woven Fabric Composites * B. Wang , K. Maekawa, N. Uda, K. Ono, and H. Nagai Kyushu University, Japan ACCM9-G-006 Time: 11:30 – 11:50 Numerical Modeling of High Velocity Impact of STF Impregnated Kevlar Fabric with a Focus on Friction * Y. Park, Y. H. Kim, A. H. Baluch, and C. G. Kim Korea Advanced Institute of Science and Technology, Republic of Korea PROGRAMME OVERVIEW Session 21 P: Nano-reinforcement & CNT 5 Time: 13:30 - 15:10 Room: M4 Session Chair: Jang Kyo Kim, Hong Kong; Richard Lin, New Zealand ACCM9-P-041/Keynote Multi-functional Properties of 3D Graphene/Polymer Composites * Time: 13:30 – 13:50 J. J. Jia, Y. Wu, Z. Y. Wang, X. Liu, X. Y. Sun, X. Shen, X. Y. Lin, G. Lin, and J. K. Kim The Hong Kong University of Science &Technology, Hong Kong Xi’an Jiaotong University, China ACCM9-P-011 Time: 13:50 – 14:10 Investigation on Mechanical Properties of Benzoxazine/Epoxy Copolymer Nanocomposites with Graphene Fillers * T. Y. Chou, Y. C. Lee, H. L. Lin, J. H. Jiang, and M. C. Yip Tsing Hua University, Taiwan ACCM9-P-029/Keynote Time: 14:10 – 14:30 Preparation and Electromagnetic Interference Shielding Effectiveness of Graphene Nanosheet/Water-born Polyurethane Composites * C. C. M. Ma , S. T. Hsiao, W. H. Liao, Y. S. Wang, and S. M. Li Tsing-Hua University, Taiwan ACCM9-P-047-1 Time: 14:30 – 14:50 Effect of Functionalization of Graphene on Thermal Conductivities of GrapheneEpoxy Composites * X. Shen, Z. Y. Wang, Y. Wu, X. Y. Lin, X. Liu, X. Y. Sun, and J. K. Kim The Hong Kong University of Science &Technology, Hong Kong ACCM9-K-001 Time: 14:50 – 15:10 Compressive Behavior of Embedded Graphene * * G. Wang, L. Liu , and Z. Zhang National Center for Nanoscience and Technology, China University of Science and Technology of China, China Session 22 O: Multi-scale Modeling Time: 13:30 - 15:10 Room: M1 Session Chair: Woonbong Hwang, Republic of Korea ACCM9-U-002 Corner Radius Stress Analysis of Aircraft Composite Wing C-Spar * Time: 13:30 – 13:50 J. H. Kim, S. J. Park, J. H. Kweon , and J. H. Choi Gyeongsang National University, Republic of Korea ACCM9-O-006-1 Time: 13:50 – 14:10 Progressive Damage and Failure Modeling of Transverse Fiber Bundle Composite (TFBC) using Multiscale Analytical Method * G. C. Qi , B. M. Zhang, S. Y. Du, and Z. W. Tang Beihang University, China Harbin Institute of Technology, China ACCM9-O-004 Time: 14:10 – 14:30 Three-dimensional Numerical Analysis of Load Transfer in Unidirectional Composites with Randomly Distributed Fibres * Y. L. Yu, B. M. Zhang , Z. W. Tang ,and G. C. Qi Beihang University, China ACCM9-O-005 Time: 14:30 – 14:50 Prediction of Machining Deformation for Composite Materials * K. Liu, J. R. Ye , Z. Tang, W. Liu, and B. M. Zhang Beihang University, China Shanghai Aircraft Manufacuring Co., China PROGRAMME OVERVIEW ACCM9-U-011 Time: 14:50 – 15:10 The Piezoelectric Characteristics of PNN-PZT/Epoxy Paint Sensor according to the Thickness * D. H. Han, S. B. Park, and L. H. Kang Chonbuk National University, Republic of Korea Session 23 X: Testing Mechanics & Methods Time: 13:30 - 15:10 Room: M2 Session Chair: Jinglei Yang, Singapore ACCM9-E-006/Keynote Non-destructive Evaluation of Damage Accumulation for Composites using a Time: 13:30 – 13:50 Laser-Generated Lamb Waves Method * J. L. Zhao, J. H. Qiu , J. D. Zong, W. X. Yao, and H. L. Ji Nanjing University of Aeronautics and Astronautics, China ACCM9-X-001 Time: 13:50 – 14:10 A Particle-embedded Method to Measure the Mechanical Properties of Small Particles * W. Y. Yan , T. F. Low, and C. L. Pun Monash University, Australia ACCM9-X-003 Time: 14:10 – 14:30 Finite Element Implementation of Nonlinear Constitutive Model for Composites with Different Properties in Tension and Compression * J. Wang, Y. Xiao , S. S. Liu, and K. Xue Tongji University, China Shanghai Jiao Tong University, China ACCM9-X-002 Time: 14:30 – 14:50 Shear Buckling Test for Composite Laminate Using a Picture Frame Shaped Fixture * J. S. Yoo, S. J. Park, J. H. Kweon , and J. H. Choi Gyeongsang National University, Republic of Korea ACCM9-F-001 Time: 14:50 – 15:10 Permeability Tests of Fiber Fabrics in the Vacuum Assisted Resin Transfer Molding Process * C. C. Wang , B. M. Zhang, G. H. Bai, and Y. Wang Beihang University, China Donghua University, China Session 24 H: Impact & Dynamic Response 2 Time: 13:30 - 15:10 Room: M3 Session Chair: Yi Xiao, China ACCM9-AA-006/Keynote Comparative Study on the Influence of Liquid Nitrogen and Liquid Oxygen on Time: 13:30 – 13:50 Cryogenic Mechanical Properties of Carbon Fiber Reinforced Plastics * X. Liu , Z. J. Wu, Q. Q. Xu, L. Xu, and Y. T. Li Dalian University of Technology, China ACCM9-H-006 Time: 13:50 – 14:10 Spacecraft Carbon/Epoxy Composites Shielding System in Triple Bumpers Configurations * A. H. Baluch, Y. Park, and C. G. Kim KAIST, Republic of Korea ACCM9-I-006 Time: 14:10 – 14:30 Application of Carbon Fiber in Composite Pressure Vessel * M. Yang Sinoma Science & Technology (Suzhou) Co., Ltd., China PROGRAMME OVERVIEW ACCM9-B-001 Time: 14:30 – 14:50 Polymerization Shrinkage Stress Analysis of Methacrylate-based and Siloranebased Composites During Dental Restoration * J. H. Park, and N. S. Choi Hanyang University, Republic of Korea ACCM9-M-001 Time: 14:50 – 15:10 Electrochemical Degradation Test of a Carbon-black-filled EPDM Rubber * S. W. Han, and N. S. Choi Hanyang University, Republic of Korea Session 25 P: Nano-reinforcement & CNT 6 Time: 15:40 - 17:40 Room: M4 Session Chair: Minzhi Rong, China ACCM9-P-035/Keynote Some Recent Progress in Cryogenic Mechanical Properties of Epoxy Composites * Time: 15:40 – 16:00 N. Li, Y. Liu, H. M. Xiao, X. J. Shen, Y. Zhao, Q. P. Feng, Y. Hua, and S. Y. Fu Chinese Academy of Sciences, China ACCM9-P-045 Time: 16:00 – 16:20 Development of Graphene Oxide Multiwall Carbon Nanotube Fiber Prepared by Wet Spinning * Y. Q. Wang, G. H. Zhou, J. H. Byun , J. U. Lee, B. M. Jung, and B. S. Kim Korea Institute of Materials Science, Republic of Korea ACCM9-P-051 Time: 16:20 – 16:40 Study on Thermal Properties of 2D/3D Graphene/Polymer Composites * Y. H. Zhao, Z. K. Wu, and S. L. Bai Peking University, China ACCM9-P-008 Time: 16:40 – 17:00 Numerical Analysis of the Alignment of MWCNT-Fe3O4 Synthesized with Coprecipitation Process * W. S. Li, X. J. Xu, G. Yang, X. L. Jia , and X. P. Yang Beijing University of Chemical Technology, China ACCM9-C-007 Time: 17:00 – 17:20 Moderation of Dependence of Frictional Coefficient on Temperature between Counter Surfaces of C/C composite Modified with Glass Fibers * M. Kimura , K. Obunai, K. Okubo, and T. Fujii Doshisha University, Japan Okayama Prefectural University, Japan ACCM9-C-014 Time: 17:20 – 17:40 350°C Temperature-resistant RTM Polyimide Resin and Its Composites * P. Zhang, G. Liu, X. Zhong, and J. Bao AVIC Composite Center Institute, China Session 26 S: Processing & Manufacturing Technologies 2 Time: 15:40 - 17:40 Room: M1 Session Chair: Jianyu Zhang, China ACCM9-P-033-2/Keynote Toughening Epoxy with Very Low Graphene Content * Time: 15:40 – 16:00 Y. T. Park , Y. Qian, A. Stein, and C. W. Macosko Myongji University, Republic of Korea University of Minnesota, USA ACCM9-S-011 Time: 16:00 – 16:20 Manufacturing Process and Mechanical Properties of Recycled Carbon Fiber Card Web Reinforced Thermoplastics * H. Wei , H. Lee, I. Ohsawa, and J. Takahashi The University of Tokyo, Japan PROGRAMME OVERVIEW ACCM9-S-006 Time: 16:20 – 16:40 Design, Analysis and Manufacturing of AFP Mandrel for Composite Aircraft Fuselage Skin * V. H. Truong, D. Kumar, J. H. Kweon , R. Roy, and J. H. Choi Gyeongsang National University, Republic of Korea ACCM9-S-013 Time: 16:40 – 17:00 Structural Analysis of Fiber Steered Composite Laminates using Shifted Fiber Paths * Z. Wang, L. Zu , J. H. Wang, and S. X. Li Wuhan University of Technology, China ACCM9-S-014 Time: 17:00 – 17:20 Optimization of fiber steered trajectories for automated tow placement * J. Zhou, L. Zu, S. X. Li, and J. H. Wang Wuhan University of Technology, China ACCM9-L-010 Time: 17:20 – 17:40 The Structural Analysis and Strength Evaluation of the Rivet Nut Joint for Composite Repair * S. Y. Yoo, J. H. Choi , and J. H. Kweon Gyeongsang National University, Republic of Korea Session 27 Q: Fibers & Green Composites 4 Time: 15:40 - 17:40 Room: M2 Session Chair: Myungsoo Kim, Republic of Korea ACCM9-W-001 Integrated FBG Sensor Responses and DIC Techniques Approach to Monitor Time: 15:40 – 16:00 Damage in Glass Fibre Reinforced Composite Plates * J. A. Epaarachchi, C. Fernando, G. Kahandawa , S. H. Lim, and G. Prusty University of Southern Queensland, Australia School of Engineering & Information Technology Federation University, Australia University of New South Wales (UNSW), Australia ACCM9-Q-013 Time: 16:00 – 16:20 Effect of Particle Size Variation on Mechanical and Thermal Properties of Oyster Shell Powder Reinforced Polypropylene Composite * A. R. Shah, D. W. Lee, M. N. Prabhakar, B. S. Kim, and J. I. Song Changwon National University, Republic of Korea Korea Institute of Material Sciences, Republic of Korea ACCM9-M-002 Time: 16:20 – 16:40 Environmental Aging Performance and Mechanism of T700 Carbon Fiber Reinforced Epoxy Resin Composites * D. J. Zhang , G. Liu, J. W. Bao, B. M. Tang, X. Y. Zhong, and X. B. Chen Beijing Institute of Aeronautical Materials, China ACCM9-G-001 Time: 16:40 – 17:00 Damage Progression Analysis of Newly Designed Unidirectionally Arrayed Chopped Strands Laminates * H. Li , W. X. Wang, T. Matsubara, D. Mei Luo, and J. Xue Hunan University, China Kyushu University, Japan Foshan University, China Beijing Aeronautical Science & Technology Research Institute, China ACCM9-Q-005 Time: 17:00 – 17:20 Microstructure and Tensile Properties of Alkali-treated Abaca Fibers * M. Cai, H. Takagi , A. N. Nakagaito, and Y. Li Tongji University, China The University of Tokushima, Japan PROGRAMME OVERVIEW ACCM9-T-007-1 Time: 17:20 – 17:40 Current Trend of the Composite Material in the Wind Industry * Z. Tian TPI Composites (Taicang) Co.,Ltd, China Session 28 N: Multi-functional Composites 4 Time: 15:40 - 17:40 Room: M3 Session Chair: Nak-Sam Choi, Republic of Korea ACCM9-U-012 Impact Monitoring of a Composite Structure using Piezoelectric Paint Sensor * Time: 15:40 – 16:00 S. B. Park, D. H. Han, and L. H. Kang Chonbuk National University, Republic of Korea ACCM9-B-004 Time: 16:00 – 16:20 Investigation of Anticoagulation Mechanism of Biomedical Materials * L. Li , and J. Shen Nanjing Normal University, China ACCM9-T-009 Time: 16:20 – 16:40 Time-dependent Behavior of Multilayered Composite Beams with Viscoelastic Interlayers * P. Wu, D. Zhou , and W. Q. Liu Nanjing Tech University, China ACCM9-T-010 Time: 16:40 – 17:00 Elasticity Solution of Laminated Beams Subjected to Thermo-loads * H. Qian , D. Zhou, W. Q. Liu, and H. Fang Nanjing Tech University, China ACCM9-B-003 Time: 17:00 – 17:20 Preparation and Mechanical Properties of Composite Biomedical Resin Adhesive * Y. Y. Wang, T. Wang , and Y. Qi Nanjing University of Aeronautics and Astronautics Nanjing, China ACCM9-N-024 Time: 17:20 – 17:40 Improvement of Rheological Properties and Early Hydration Characteristics of Cement-based Materials with High Volume of GBFS * X. S. Tang , G. H. Huang, Y. B. Cai, and J. B. Wen Nanjing Hydraulic Research Institute, China Nanjing R&D High Technology Co.,Ltd., China Research Center on New Materials in Hydraulic Structures of Jiangsu R&D, China PROGRAMME OVERVIEW FRIDAY, OCTOBER 17, 2014 Plenary Lecture 5 Time: 08:15 – 08:50 Room: Grand Ballroom B Interfacial Response in Composite Materials Prof. Frank R. Jones, The University of Sheffield, The United Kingdom Chair: Jang-Kyo. Kim, Hong Kong Plenary Lecture 6 Time: 08:50 - 09:25 Room: Grand Ballroom B Shape Memory Polymer Composites: A Path towards Active Morphing Structure Prof. Jinsong Leng, Harbin Institute of Technology, China Chair: Xiaozhi Hu, Australia Plenary Lecture 7 Time: 09:25 – 10:00 Room: Grand Ballroom B Development and Application of Carbon Fiber in China Prof. Jian Xu, Chinese Academy of Sciences, China Chair: Hao Wang, Australia PROGRAMME OVERVIEW WEDNESDAY, OCTOBER 15 --- THURSDAY, OCTOBER 16, 2014 Poster Session Time: 08:00 - 17:30 Room: Grand Ballroom A ACCM9-A-012 Influence of the Cryogenic Treatment on Properties of Carbon Fiber * Y. N. Zhang, F. J. Xu , W. Fan, W. Liu, and Y. P. Qiu Donghua University, China Shanghai University of Engineering Science, China ACCM9-A-014 Energy Harvesting Performance of Electro-active Dielectric Elastomers * F. A. Y. Cui, S.R. Ryu, and D. J. Lee Yeungnam University, Republic of Korea Gumi University, Republic of Korea ACCM9-A-017 Low Temperature Solid State Synthesis of TiB2-TiC Composite Powder in Ti-B System Chemically Activated by PTFE * Y. H. Yu, T. Wang , H. M. Zhang, and D. B. Zhang Nanjing University of Aeronautics and Astronautics, China ACCM9-A-018 The Study on Interface and Performance of Stainless Steel Aluminum Cladded Metals * W. J. Pei, X. Z. Guo, Z. L. Liu, J. Ling, and J. Tao Nanjing University of Aeronautics and Astronautics, China ACCM9-A-019 Influence of Ultrasonic Power on the Interface and Bonding Performance of Titanium by Anodic Oxidation * L. X. Duan, L. Pan , J. M. Cao, Y. B. Hu, J. Tao, U. Yapici, and L. Cai Nanjing University of Aeronautics and Astronautics, China ACCM9-A-020 Tensile Characteristic of Fiber-metal Laminates Based on Carbon Fiber Reinforced PMR Polyimide * Y. B. Hu, H. G. Li, Y. N. Zhang, L. Pan, L. Cai, J. P. Zhu, J. Xu, and J. Tao Nanjing University of Aeronautics and Astronautics, China ACCM9-AA-007 In Situ Synthesis and Mechanical, Thermal Properties of Polyimide Nanocomposite Film by Addition of Functionalized Graphene Oxide * P. J. Liu, Z. J. Yao , and J. T. Zhou Nanjing University of Aeronautics and Astronautics, China ACCM9-AA-008 Dielectric and Thermal Performances of Graphene/Bismaleimide/2,2'Diallylbisphenol A Composite * T. M. Li, Z. J. Yao , and J. T. Zhou Nanjing University of Aeronautics and Astronautics, China ACCM9-C-006 Formation of CNT and Graphene Networks using Inkjet-printing * W. Shim, S. Y. Jeon, Y. Kwon, and W. R. Yu Seoul National University, Republic of Korea ACCM9-C-008 Studies on the Preparation of Carboncarbon Composites Prepared with Propane by the Thermal Gradient Chemical Vapour Infiltration * D. H. Kim, K. D. Joo, S. H. Kim, and G. Y. Chung Hong-Ik University, Republic of Korea PROGRAMME OVERVIEW ACCM9-C-010 Study on γ-ray Irradiation Curing of the SiC/Polycarbosilane Composite Resin * Y. L. Zhu, T. Wang , W. Wang, and J. Tao Nanjing University of Aeronautics and Astronautics, China ACCM9-C-011 Thermal Decomposition Kinetics of γ-ray Irradiation-cured Polycarbosilane Resin * Y. L. Zhu, T. Wang , W. Wang, and J. Tao Nanjing University of Aeronautics and Astronautics, China ACCM9-C-013 Effect of Surface Treatment on CF for the Interface Bonding of CF and PEEK * Q. W. Dai, L. Cai, Y. B. Hu, D. D. Du, and J. Tao Nanjing University of Aeronautics and Astronautics, China ACCM9-D-002 The Relationship Between Lattice Defects and Hydrogen Storage Ability of TiCx * H. M. Ding , X. L. Fan, K. Y. Chu, and J. F. Wang North China Electric Power University, China ACCM9-E-005 Hydrothermal Aging of Jute Reinforced Poly(lactic acid)(PLA) Composites * * N. Jiang, T. Yu , Y. Li , J. Xiong, and S. Cai Tongji University, China ACCM9-G-014-2 Investigating Fatigue Behaviors of Double Lap Composite Joint with Stepwise Patch * W. Y. Chuang, and J. L. Tsai Chiao Tung University, Taiwan ACCM9-K-005-2 Interfacial Shear Strength of Carbon Fiber-thermoplastic Composites * M. C. Sung, G. Lee, and W. R. Yu Seoul National University, Republic of Korea ACCM9-K-011 Polymer Coating of Carbon Fibres and Its Effects on Mechanical Properties of PEEK Composites * U. Yapici, L. Pan , J. M. Cao, L. X. Duan, Y. B. Hu, and L. Cai Nanjing University of Aeronautics and Astronautics, China Jiangsu Chengfei Precision Alloy Co., Ltd, China ACCM9-L-013 Extraction Test of Jagged Shaped Metallic Z-pin * I. H. Choi , J. S. Jeong, and S. K. Cheong Korea Aerospace Research Institute, Republic of Korea Korea Polytechnic University, Republic of Korea Seoul National University of Science and Technology, Republic of Korea ACCM9-N-017 The Study of Melting Electrospun Fibrous Membrane for Filter Application * C. M. Wu , and Y. T. Chen Taiwan University of Science and Technology, Taiwan ACCM9-N-021 Synthesis of a Low Viscosity UV-curable Prepolymer Ethylene Glycol Diglycidyl Ether Diacrylate * J. Li, Y. H. Cui , and C. C. Zhang Nanjing University of Aeronautics and Astronautics, China ACCM9-N-023 Study on the Hydrophobic Behaviors of Modified Fluorocarbon Composite Coating on FRP * H. Zhang, T. Wang , and Y. Yu Nanjing University of Aeronautics and Astronautics, China PROGRAMME OVERVIEW ACCM9-N-026 Performance Evaluation of Rapid Repair Material Model of Magnesium Phosphate Cement * J. B. Wen , X. S. Tang, G. H. Huang, Y. R. Zhu, and D. Wang Nanjing Hydraulic Research Institute, China Nanjing R&D High Technology Co.,Ltd., China Research Center on New Materials in Hydraulic Structures of Jiangsu R&D, China ACCM-O-001 The Molecular Dynamics Simulation of Electrostricive Intelligent CNT-based Nanofiber * X. H. Yan, Q. S. Yang , and J. J. Shang Beijing University of Technology, China ACCM9-O-003 The Meso-structure and Effective Properties of Filament-wound Composites * X. T. Li, B. Yu, A. Dineshkumar, C. Jerome, and J. L. Yang Nanyang Technological University, Singapore ACCM9-O-006-2 Modeling and Simulation of the Open-hole Tensile Properties of the Fiber Metal Laminates * D. D. Du, L. Cai, J. P. Zhu, and J. Tao Nanjing University of Aeronautics and Astronautics, China Jiangsu Chengfei Precision Alloy Co., Ltd, China ACCM9-P-003 Preparation and Properties of Novel Epoxy/Graphene Oxide Nanosheets (GON) Composites Functionalized with Flame Retardant Containing Phosphorus and Silicon * J. M. Yang, and C. L. Chiang Hung-Kuang University, Taiwan ACCM9-P-016 Study on Mechanical and Torsion Fatigue Properties of Graphene Nanoplatelets Composites Materials under Hygrothermal Effects * T. Y. Chou, Y. C. Lee, C. H. Liu, H. L. Lin, and M. C. Yip Tsing Hua University, Taiwan ACCM9-P-023 Manufacturing and Wear Resistance of CNT/CFRP Composites * S. J. Kim, J. C. Park, M. N. Prabhakar, and J. I. Song Changwon National University, Republic of Korea ACCM9-P-024 The Morphology Comparison of Single Wall-, Double Wall-, and Multi Wall- Carbon Nanotube Functionalized in the Supercritical Carbon Dioxide and the Properties of Its PC/ABS Nanocomposites * H. C. Kuan , C. F. Kuan, C. H. Chen, and C. L. Chiang Far East University, Taiwan Hung kuang University, Taiwan ACCM9-P-026 Enhanced Fracture Toughness of Stacked-cup Carbon Nanofiber Incorporated in CFRP Laminates * P. F. Wang, W. S. Liu, X. Zhang, X. H. Lu, and J. L. Yang Nanyang Technological University, Singapore ACCM9-P-046-1 Synthesis and Characterization of UV curable Antistatic Coatings with Carbon Nanotubes * F. Ying, and Y. H. Cui Nanjing University of Aeronautics and Astronautics, China PROGRAMME OVERVIEW ACCM9-P-046-2 Carbon Nanotube Buckypaper Reinforced Epoxy Nanocomposites * Y. Qiu, F. J. Xu , B. Wei, W. Liu, W. Li, and Y. Qiu Donghua University, China Shanghai University of Engineering Science, China ACCM9-P-047-2 Carbon Nanotubes Reinforced UV-curing Materials for Three-dimensional Printing (3DP) * C. C. Zhang, J. Li, and Y. H. Cui Nanjing University of Aeronautics and Astronautics, China ACCM9-P-048 Poly(P-oxybenzoate) Reinforced Polyesterimide Molecular Composites * Q. B. Guan, S. J. Picken, B. Norder, and T. J. Dingemans Delft University of Technology, The Netherlands ACCM9-Q-016 Fabrication and Evaluation of Mechanical Properties of Ijuk Fiber Reinforced Polypropylene Composite * C. U. Kim, S. J. Kim, M. S. Jun, B. S. Kim, and J. I. Song Changwon National University, Republic of Korea Korea Institute of Materials Science, Republic of Korea ACCM9-Q-024 Biotemplate Synthesis of Micron Braid Structure CeO2-TiO2 Composite Oxide and it Superior Catalytic Behaviour for CO Oxidation * F. Chen, C. B. Liu, J. C. Qian, and Z. G. Chen Suzhou University of Science and Technology, China ACCM9-Q-025 CeO2-MnO2 Graphene Electrode for High Energy Density Supercapacitors Derived from Plant Membrane * C. B. Liu, J. C. Qian, Z. G. Chen , F. Chen, and F. J. He Suzhou University of Science and Technology, China ACCM9-Q-026 Slenderness Effects on CFRP-Confined Concrete-Filled Steel Tube Columns * Y. Y. Lu, N. Li , S. Li, and H. J. Liang Wuhan University, China ACCM9-S-003 Processing Parameters of Glass Fiber Reinforced Vinyl Ester/Nano-mica Matrix Composites for Pultrusion * Y. Y. Sun, Y. C. Juang, and C. H. Chen Tung Fang Design University, Taiwan Chinese Culture University, Taiwan ACCM9-S-015-2 Contribution of Allophane to the Flame Retardancy and Mechanical Properties of Traditional Flame Retardants in PP * D. Li, X. Su , J. Tao, and Q. Dai Nanjing University of Aeronautics and Astronautics, China ACCM9-T-007-2 The Effects of Low Temperature and Moisture Absorption on Compressive Properties of PMI Foam * P. F. Zhao, and W. X. Li Tongji University, China ACCM9-T-007-3 The Preparation and Properties of Novel Fiber Metal Laminate Based on Aluminumlithium Alloy * H. G. Li, Y. W. Xu, Y. B. Hu, X. W. Zheng, H. B. Liu, B. M. Wang, and J. Tao Nanjing University of Aeronautics and Astronautics, China Shanghai Aircraft Manufacturing Company Limited., China Jiangsu Province Special Equipment Satety Supervision Inspection, China PROGRAMME OVERVIEW ACCM9-T-021 Surface Treatment Process on Aluminum-lithium Alloy and its Impact on the Property of Novel Aluminum-lithium Alloy Laminate * Y. Xu, H. Li, Y. Hu, C. Liu, X. Zheng, Z. Sun, and J. Tao Nanjing University of Aeronautics and Astronautics, China Shanghai Aircraft Manufacturing Company Limited., China ACCM9-U-008-2 Actuation and Energy Harvesting Performance of Electro-active Dielectric Elastomers * D. J. Lee , and Y. Cui Yeungnam University, Republic of Korea ACCM9-U-009 Structure-performance Correlations in Electrochromic Behaviors of Terpyridine-metal Hybrid Materials * C. Q. Ye, X. M. Wang , Y. Y. Zhou, Z. Q. Liang, W. Zhang, and Z. G. Chen Suzhou University of Science and Technology, China ACCM9-Y-001 Rate-dependent Behaviour of Multi-layered Composite Aramid Fibers Containing Shear Thickening Fluids and Phase-changing Materials * S. Han, W. Na, H. Ahn, and W. R. Yu Seoul National University, Republic of Korea ACCM9-Z-013 Study and Application of Aramid Paper Honeycomb Core Filled with Phenolic Foam J. J. Mu*, Y. Liu Aramicore Composite Co., Ltd, China
© Copyright 2024