74 P S Push-buttons, selectors and indicators ø 22mm

NEW 74 PS RANGE
Push-buttons, selectors and
indicators ø 22mm
Depliant 74PS.indd 1
24/09/14 11:34
74 PS RANGE
Push-buttons,
selectors and
indicators ø 22mm
The 74 PS range: a system of push-buttons, selectors and indicators with a 22mm diameter
and an IP66 degree of protection that makes it possible to create an interface in its own
right between man and machine and, at the same time, permit the control of the operation
status and of the devices, ensuring high safety standards.
Quick selection
LED technology
The special aspect of the 74 PS range is
the simplicity with which the products
are configured: the panel indicator lights
are supplied with a nut so they can be
fastened on the panel and the contactholder flange: by adding the NO and NC
contacts, it is possible to create a specific
command logic for each system.
The products in the new 74 PS range
that can be illuminated can be equipped
with LED lamps and BA9S coupling to
guarantee high performance, absolute
reliability and also a longer lifespan, and
as a result less maintenance.
2
Depliant 74PS.indd 2
24/09/14 11:34
THE NEW RANGE
The offer of push-buttons, selectors and
indicators is expanded and completed
with the introduction of luminous
versions and the extension of the
available colours. These products
are suitable for satisfying the most
sophisticated demands
for customising the
command boards.
Quick installation
Reliability and duration
Thanks to the practical snap-coupling
mechanism for the contacts, the time
required to assemble the panel is radically
reduced. Also dual contacts are available
to make installation even more flexible
and to be able to install up to four contacts
plus a space for the lamp coupling on the
three gang flanges for the indicator lights.
All of the products that are part of the 74
PS offer have been subjected to severe
laboratory tests in order to authenticate
their performance, reliability and lifespan:
characteristics that validate the high
quality and resistance of the new range.
Interaction with GEWISS
products
The high degree of protection IP66
makes it possible to house the 74 PS
indicator lights inside or outside of the
GEWISS containers: 46 range automation
boards, 42RV emergency enclosures, 27
COMBI boxes, 42RV support bases are
only a few examples.
3
Depliant 74PS.indd 3
24/09/14 11:34
The reference point f
74 PS RANGE
Temporary push-buttons ø 22mm
Wide system of temporary push-buttons ø 22mm that are easily combinable due
to the design that is standardised with the front. The GEWISS command devices
are suitable for all types of indoor and outdoor industrial environments.
ILLUMINATED VERSION
Push-buttons with and without guard - round shape
Mushroom-head push-buttons ø40 - round shape
Available in up to 6 colours
Emergency push-buttons ø 22mm
The emergency push-buttons are distinguished by their excellent performance,
robustness and ease of installation. They are suitable for implementing
emergency operations in accordance with standard IEC60947-5-5
NOTES
NON ENABLED position
by means of the green strip
on the indicator light body
HOW TO RELEASE
THE MUSHROOMHEAD PUSH-BUTTON
ROTATION
RELEASE
PUSH
Selectors ø 22mm
POSITIONS
The selectors are available in 3 different configurations, each with 2 or 3 positions.
The innovative design of the lever guarantees a better grip.
0
I
I
0
Fixed position
II
0
I
I
0
Key and fixed position
II
0
I
I
0
Return to - 0 -
II
Position
-1-
Position
-0-
Position
-2-
4
Depliant 74PS.indd 4
24/09/14 11:34
t for industrial automation
Luminous indicators ø 22mm
LED TECHNOLOGY
Luminous indicators with direct power supply, gem with diffuser in thermoplastic
material. BA9S lamp coupling and lenses designed with larger dimensions to
increase the range of visibility.
GUARANTEE
OF PERFORMANCE,
RELIABILITY
AND LONGER
LIFESPAN
COLOUR SELECTION: in accordance with Standard CEI 16-3.
Safety
Danger or Alarm
Attention
Accessories
Wide range of available accessories, including:
NO and NC contacts (single and dual)
Blank caps
Identification plates
Quick assembly tools
General
General
SINGLE AND DUAL CONTACTS
GREATER
INSTALLATION
FLEXIBILITY
1 NO
1 NC
Push-button panels ø 22mm
The range includes empty containers that have a capacity of up to 12 gangs and
containers complete with indicator lights in the most typical configurations.
Interaction also with the 42RV, 42TV and 27 COMBI families.
2 NO
2 NC
1 NO + 1 NC
EMERGENCY CONTAINER
IP66
Ready to use and professional, thanks to the redcolour mushroom-head push-button with holding
and yellow box cover. Particularly suited for
onboard applications with the function of device for
emergency stop.
5
Depliant 74PS.indd 5
24/09/14 11:34
74 PS RANGE
Indicator lights Ø 22 mm - IP66
GW74301
Temporary push-buttons
TEMPORARY PUSH-BUTTONS WITH ROUND GUARD
Code
Colour
GW 74 301
GW 74 302
GW 74 303
GW 74 304
GW 74 305
GW 74 306
Green
Black
White
Red
Blue
Yellow
Pack
carton
10/60
10/60
10/60
10/60
10/60
10/60
GW74311
APPLICATION: suitable for avoiding accidental activation, e.g.: gates, tool machines, etc..
ACCESSORIES SUPPLIED: 3-seat flange (2 of which are contact-holders).
TEMPORARY PUSH-BUTTONS WITHOUT ROUND GUARD
Code
Colour
GW 74 311
GW 74 312
GW 74 313
GW 74 314
GW 74 315
GW 74 316
Red
Black
Green
White
Blue
Yellow
Pack
carton
10/60
10/60
10/60
10/60
10/60
10/60
GW74345
ACCESSORIES SUPPLIED: 3-seat flange (2 of which are contact-holders).
TEMPORARY PUSH-BUTTONS WITH LUMINOUS ROUND GUARD
Code
Colour
GW 74 341
GW 74 342
GW 74 343
GW 74 344
GW 74 345
Green
White
Red
Blue
Yellow
Pack
carton
10/60
10/60
10/60
10/60
10/60
APPLICATION: ideal also for displaying the operation status of the user without the use of additional indicator lamps.
ACCESSORIES SUPPLIED: 3-seat flange (2 of which are contact-holders)
CHARACTERISTICS: can be equipped with GW74511 lamp-holder + LED lamp
GW74367
Mushroom-head push-buttons
ROUND MUSHROOM-HEAD PUSH-BUTTONS - MUSHROOM-HEAD Ø 40 MM
Code
Functions
Characteristics
GW 74 363
GW 74 364
GW 74 366
GW 74 367
Without holding
With holding
Without holding
With holding
Not luminous
Not luminous
Backlit
Backlit
Pack
carton
10/60
10/60
10/60
10/60
ACCESSORIES SUPPLIED: 3-seat flange (2 of which are contact-holders).
NOTE: compatible with the emergency enclosure GW42204 + LED lamp
CHARACTERISTICS: GW74366 and GW74367 can be equipped with GW74511 lamp-holder + LED lamp
6
j= January 2015
Depliant 74PS.indd 6
24/09/14 11:34
GW74361
Emergency push-buttons
ROUND EMERGENCY MUSHROOM-HEAD PUSH-BUTTONS - MUSHROOM-HEAD Ø 40 MM
Code
GW 74 361
GW 74 362
GW 74 365
j
Functions
Characteristics
With holding
With holding and key
With holding
Not luminous
Not luminous
Backlit
Pack
carton
10/60
10/60
10/60
APPLICATION: suitable for implementing emergency operations in accordance with standard IEC 60947-5-5.
ACCESSORIES SUPPLIED: 3-seat flange (2 of which are contact-holders).
NOTES: all the keys are supplied with a standardised code.
CHARACTERISTICS: GW74365 can be equipped with GW74511 lamp-holder + LED lamp
GW74401
Selectors
ROUND LEVER SELECTORS WITH FIXED POSITION
Code
GW 74 401
GW 74 402
No.
gangs
2
3
Type
0-1
1-0-2
Pack
carton
10/60
10/60
GW74411
CHARACTERISTIC: indicator light in thermoplastic material.
NOTE: 3-seat flange (2 of which are contact-holders).
ROUND KEY SELECTORS WITH FIXED POSITION AND REMOVABLE KEY
Code
GW 74 411
GW 74 412
No.
gangs
2
3
Type
0-1
1-0-2
Pack
carton
10/60
10/60
GW74421
CHARACTERISTIC: indicator light in thermoplastic material.
ACCESSORIES SUPPLIED: 3-seat flange (2 of which are contact-holders).
NOTE: all the keys are supplied with a standardised code.
ROUND LEVER SELECTORS WITH 0 RETURN POSITION
Code
GW 74 421
GW 74 422
No.
gangs
2
3
Type
0-1
1-0-2
Pack
carton
10/60
10/60
CHARACTERISTIC: indicator light in thermoplastic material.
ACCESSORIES SUPPLIED: 3-seat flange (2 of which are contact-holders).
j= January 2015
7
Depliant 74PS.indd 7
24/09/14 11:34
74 PS RANGE
Indicators - IP66
GW74452
Indicators
LUMINOUS INDICATORS WITH DIRECT POWER SUPPLY, GEM WITH DIFFUSER IN THERMOPLASTIC MATERIAL RATED VOLTAGE 230 V - BA9S LAMP COUPLING
Code
Colour
GW 74 451
GW 74 452
GW 74 453
GW 74 454
GW 74 455
Green
Red
Yellow
Blue
White
Pack
carton
10/100
10/100
10/100
10/100
10/100
CHARACTERISTICS: lamp excluded. Max lamp power 1 W.
NOTE: the colour of the gem must be selected in compliance with the colour codes suggested by standard CEI 16-3.
Complementary items
GW74501
Accessories
CONTACTS - ITH=10 A - 250 V AC
Code
Type
Colour
GW 74 501
GW 74 502
GW 74 503
GW 74 504
GW 74 505
1 NO
1 NC
2 NO
1 NO + 1 NC
2NC
Green
Red
Green
White
Red
k
k
k
Pack
carton
1/30
1/30
1/30
1/30
1/30
GW74511
CHARACTERISTICS: GW74502 suitable for contact opening also in the event of slight sticking, in compliance with Standard EN 60947-5-1.
Clip assembly on the contact-holder flanges. GW74501 and GW74502 compatible with the emergency enclosure GW42204.
LAMP POWER SUPPLY - BA9S LAMP COUPLING
Code
Power supply
GW 74 511
Direct
Lamp
power
1W
Pack
carton
1/30
GW74515
CHARACTERISTICS: Clip assembly on the contact-holder flanges. To be positioned in the central seat of the flange.
APPLICATIONS: to be used with the luminous temporary push-buttons with a guard and luminous mushroom-head push-buttons to implement functional signalling.
LAMPS - BA9S LAMP COUPLING
Code
Type
GW 74 515
GW 74 516
GW 74 517
GW 74 518
LED
LED
LED
LED
Rated
voltage
12V
24V
110V
230V
Pack
carton
10/100
10/100
10/100
10/100
GW74521
APPLICATIONS: to be used with luminous indicators or with power supply GW74511.
BLANK CAP FOR EMPTY CONTAINERS FOR ROUND PUSH-BUTTONS - Ø 22 MM
Code
Colour
GW 74 521
Black
Pack
carton
10/100
GW74523
CHARACTERISTIC: cap in thermoplastic material.
PLATES
Code
GW 74 522
GW 74 523
Suitable
for
Push-buttons, indicators and selectors Ø 22 mm
Mushroom-head emergency push-buttons
Shape
Colour Text
Rectangular
Tonda
Black
Yellow
Emergency-Stop
Pack
carton
5/100
10/100
GW74525
CHARACTERISTIC: the plates are used to attribute the push-button, selector and indicator functions.
NOTE: GW74523 to be used when the emergency push-buttons are installed on a panel.
TOOLS
Code
Description
Material
GW 74 524
GW 74 525
Ring nut assembly tool
Lamp extraction tool
Metal
Thermoplastic
Pack
carton
10/100
10/100
k= October 2014
8
Depliant 74PS.indd 8
24/09/14 11:35
COMBI 22 - Containers in insulating material for indicator lights and indicators - IP66
5J
EN 62262
GW27101
Containers
EMPTY CONTAINERS FOR PUSH-BUTTONS, COMMANDS AND INDICATORS Ø 22 MM - GREY RAL 7035
Code
No.
gangs
Side
inputs
Upper
inputs
Lower
inputs
External dimensions
LxHxD (mm)
1
1
2
3
6
12
2xØ 23
2xØ 23
6xØ 23
4xØ 23
4xØ 23
4xØ 23
1xØ 23
1xØ 23
1xØ 23
1xØ 23
3xØ 23
3xØ 23
1xØ 23
1xØ 23
1xØ 23
1xØ 23
3xØ 23
3xØ 23
66x82x65
66x82x65
132x82x65
66x171x65
132x171x65
264x171x65
Colour: RAL 7035 grey
GW 27 101
GW 27 111
GW 27 102
GW 27 103
GW 27 104
GW 27 105
Pack
carton
5/60
5/60
2/30
1/20
1/10
1/10
CHARACTERISTICS: degree of protection guaranteed with the IP66 indicator lights correctly installed.
Location of the hole with knockouts to permit the installation of the indicator lights with any reference.
GW27111 yellow cover, specific for the assembly of the emergency push-buttons GW74361, GW74362 and GW74365.
GW27202
Complete containers
GW27402
Complementary items
COMPLETE CONTAINERS - GREY RAL 7035
Code
GW 27 201
GW 27 202
GW 27 203
GW 27 204
No.
gangs
1
1
2
3
Contacts
1 NO
1 NO - 1 NC
1 NO - 1 NC
1 NO - 1 NC
Indicator lights
Ø 22
Generic (black)
Emergency (red)
Start (green) Stop (red)
Start, stop, signalling
External dimensions
LxHxD (mm)
66x82x65
66x82x65
132x82x65
66x171x65
Pack
carton
1/30
1/30
1/10
1/10
CHARACTERISTICS: 3-seat flange. Maximum protrusion of the indicator light from the container: GW27201, GW20203, GW27204 - 20 mm; GW27202 - 25 mm.
GW27202, yellow cover, mushroom-head push-button with holding.
GW27204, direct power supply, BA9S coupling including max 380 V - 2 W, lamp excluded, indicator lights Ø 22 start (green) stop (red), signalling (white).
Complete insulation in compliance with Standard IEC536.
NB: the products will be supplied in the configuration with the new design shown in the photo when the previous version has been sold out.
JUNCTION BOX FOR COMBINED ASSEMBLY OF MODULAR CONTAINERS
GREY RAL 7035 - IP55
Code
GW 27 402
No. knockout holes
Ø 23
Side 8 / On the back-mounting box 1
Cover screws
(no. and type)
4 - Stainless steel
External dimensions
LxHxD (mm)
132x82x55
Pack
carton
2/60
GW44622
GW26406
Complete insulation can be obtained by using the screwcaps GW44622.
WATERTIGHT COUPLING DEVICE FOR CONTAINERS, DEVICES AND BOXES - IP55
Code
GW 26 406
Ø assembly
hole (mm)
23
Thread
Pack
carton
25/250 ••
PG16
SCREWCAP IN INSULATING MATERIAL
Code
Description
GW 44 622
Screwcap Ø 16 mm
Pack
carton
10/100 ••
GW74501
APPLICATIONS: used to maintain the double insulation and the original IP degree of protection of the boxes, containers and other GEWISS products.
CONTACTS - ITH= 10 A - 240 V AC
Code
Type
GW 74 501
GW 74 502
1 NO
1 NC
Utilisation category
240V AC 15
3A
3A
Utilisation category
240V DC 13
0,55A
0,55A
Colour
Green
Red
Pack
carton
10/60
10/60
CHARACTERISTICS: GW74502 suitable for contact opening also in the event of slight sticking, in compliance with Standard EN 60947-5-1.
Clip assembly on the contact-holder flanges. Compatible with emergency enclosure GW42204.
••=for 100 pieces/metres
9
Depliant 74PS.indd 9
24/09/14 11:35
74 PS RANGE
Technical characteristics
74 PS - INDICATOR LIGHTS Ø 22 mm - IP66
TECHNICAL CHARACTERISTICS (push-buttons and selectors)
Regulation: EN 60947-1 (CEI 17-44); EN 60947-5-1 (CEI 17-45)
Degree of protection: IP66 (terminals IP20)
Rated insulation voltage: 690V
Impact resistance: 100 m/s2 (maximum breaking load 1000 m/s2)
Operating temperature: -25°C to +55 °C
Storage temperature: -45°C to +85 °C
(*) AC 15 = Electromagnet control in AC
Category of use at 230V:
AC15 (*) 3A
DC13 (**) 0.55A
Protection against indirect contacts: double insulation (***)
Electrical endurance (AC-12) 230V 6A: 250 000 operations
Thermal rated current of contacts Ith: 10A
Pollution rating class : 3
(**) DC 13 = Electromagnet control in DC
(***) According to standard EN61140
74 PS - INDICATORS - IP66
TECHNICAL CHARACTERISTICS
Regulation: EN 60947-1 (CEI 17-44); EN 60947-5-1 (CEI 17-45); EN 62471
Degree of protection: IP66 (terminals IP20)
Rated insulation voltage: 690V
Impact resistance: 100 m/s2 (maximum breaking load 1000 m/s2)
Operating temperature: -25°C to +55 °C
Storage temperature: -45°C to +85 °C
Lamp:
LED
Coupling: BA9S
Max power: 1W
Type
Code
Voltage
LED current
LED
GW 74 515
GW 74 516
GW 74 517
GW 74 518
12 V
24 V
110V
230/240V
5mA
4mA
3mA
3mA
Assembly instructions
Dual contact
block
Contact-holder
flange
Nut
Identification
plates
Single contact
block
Command device
LED/contact-holder
(only for illuminated versions)
Round or toothed
holes ø 22
Ring nut
10
Depliant 74PS.indd 10
24/09/14 11:35
Dimension tables
23.1
Ø
28
.8
28
.8
3.4
45.8
Ø
45.8
23.1
Ø2
.6
Ø
26.9
11
30
11
23
26.9
19
GW 74 301 - GW 74 306
30
GW 74 311 - GW 74 316
23.1
23.1
Ø
28
.8
40
45.8
45.8
Ø
3.6
Ø2
11
26.9
30
19
26.9
20.6
GW 74 341 - GW 74 345
30
GW 74 363 - GW 74 364
GW 74 366 - GW 74 367
23.1
23.1
Ø2
40
45.8
8.8
45.8
Ø
11
26.9
33
26.9
30
30
24.1
GW 74 401 - GW 74 402
GW 74 421 - GW 74 422
GW 74 361 - GW 74 365
Ø2
46.4
10
GW 74 451 - GW 74 455
30
26.9
24.2
46.9
9.8
41.5
41.5
GW 74 501 - GW 74 502
GW 74 503 - GW 74 505
11
Depliant 74PS.indd 11
24/09/14 11:35
Sole-Member Company - Bergamo Register of Companies / VAT reg. number / Tax code (IT) 00385040167 Economic and Administrative Register no. 107496 - Share capital 60,000,000.00 EUR fully paid up
Depliant 74PS.indd 12
PB90011 IT - 08.14
DOMOTICS ENERGY LIGHTING
GEWISS S.p.A. Registered Office: Via A. Volta, 1 - 24069 CENATE SOTTO (Bergamo) - Italy
Tel. +39 035 946 111 - Fax +39 035 945 222 - [email protected] - www.gewiss.com
24/09/14 11:35