1. No category

Kosteusmittarit
Pintakosteusmittari, joka ei riko pintaa
MC-380XCA mittaa 1cm ja 10 cm syvyydeltä
Rakennekosteusmittari tehokaaseen ja nopeaan kosteuskartoitukseen MC380XCA
Mittari perustuu suosittuun Delta 2000H mittaria
Käyttökohteet:
•
•
•
•
Puun ja muiden rakennusmateriaalien
kosteuden mittaukseen
Kosteuden selvitys materiaaleista
Nopea ja tehokas kosteuskartoitus pintoja
rikkomatta
Materiaalin kuivumisen seurantaan.
Ominaisuudet:
•
•
•
•
•
•
kaksi mittaussyvyyttä 1cm ja 10cm
Mittausergonominen kotelo
Säädettävä hälytysraja äänimerkillä
Suhteellisen kosteuden laskenta
Mittaustulosten muisti
Kestävät kalvonäppäimet
Kahden mittaussyvyyden avulla voit selvittää, onko kosteus pinnan lähellä vai syvemmällä
materiaalissa.
Toimituskokoonpano: mittari, suomenkielinen ja monikielinen käyttöohje, mittarin taakse pikaohje,
pehmeä säilytyskotelo, 9V patteri. Toimiva paketti
Mittaussyvyys 1 cm
Mittaussyvyys 10 cm
Pietiko Oy
Tykistökatu 4 B 310(ElektroCity)
20520 Turku, puh (02) 2514402,
fax (02) 2510015 www.pietiko.fi
Kosteusmittarit
RAKENNEKOSTEUSMITTARI MC-380XCA Tekniset tiedot
Puumateriaalit
230 lajia tai tiheys
Kotelo
ABS
Muut materiaalit
19 materiaalia
Paristo
9 V alkaali L6R22
Mittausmenetelmä
Suurtaajuusmittaus
Koko
160x 71 x25 mm
Lämpötila-alue
0- 60°C
Paino
165 g
Pietiko Oy
Tykistökatu 4 B 310(ElektroCity)
20520 Turku, puh (02) 2514402,
fax (02) 2510015 www.pietiko.fi
DATASHEET
Moisture Content Meter for Wood and Building Material
MC-380XCA
Dual Scanning Range 10/100 mm
APPLICATIONS & FEATURES
The New MC-380XCA is a microprocessor controlled handheld moisture meter. It is reliable and simple to use and
intended for rapid and non-destructive evaluation of the
moisture content of wood and building materials, The MC380XCA can be used in production, inspection control and
detection of water damages.
In many cases, Relative Humidity (RH) is a more appropriate term. For this reason, the MC-380CXA is programmed
to calculate the RH value from the moisture content value for
building material.
It also has two selectable scanning depths: 10 mm and 100
mm.
Features:
• Direct read out of Moisture Content in percent water
or in Relative Air Humidity (RH%)
• Dual scanning Depths (10 mm and 100 mm)
• Non Invasive measurement
• Extended Material Selection groups.
• Selectable Alarm Threshold
• Audio Alarm
• Hold Function
• Density selection of wood Groups
Scanning Depth 10 mm
- Measures only the Wooden Floor
Scanning Depth 100 mm
- Scans the complete Concrete slab.
WWW.EXOTEK-INSTRUMENTS.COM
Scanning Depth 100 mm,
- Can detect moisture within an
entire support Beam.
DATASHEET
TECHNICAL SPECIFICATION
MC-380XCA
INTENDED USERS
Woodworkers, Cabinet and furniture makers Floor-ing installers, Contractors and quality
assurance inspectors. Anyone who needs a professional quality tool to inspect wood and building
materials for accurate moisture content or relative humidity.
WOOD
230 different species of wood or user defined by density.
BUILDING MATERIALS
Ytong, Bricks, Wall tiles, Plaster, Eternit slab, Floor tiles, Sand, Sand stone, Lime stonePVC/Linoleum on concrete, Concrete, concrete slab, Clinker.
MEASURING PRINCIPLE
Capacitance type, non intrusive. Detection of dielectric changes due to variation of Moisture
Content in the material using a High Frequency signal.
MEASURING RANGE - CONCRETE
Building material: 0- 98% Relative air Humidity (RH)
MEASURING RANGE - MOISTURE
CONTENT
Wood (@ 200 kg/m3): 0- 85% H2O
Building material: 0-11% H2O The Maximum value differs depending of the density of the material.
MEASURING ACCURACY
Approximately ± 1 % MC
MEASURING GROUPS (DENSITY
RANGE)
50 Wood Groups . (200-1180 kg/m3)
19 Building Materials Groups. (1200-3000 kg/m3)
Internal sensor: Maximum 10 mm. 15 mm at high density materials.
Measuring Springs: Maximum 100 mm
SCANNING DEPTH (SELECTABLE)
AUTOMATIC SHUT DOWN
Yes, 30 Seconds
BATTERY WARNING
Yes
WORKING RANGE
0°C/+60°C
DISPLAY
LCD digital 3 ½ Digits
RESOLUTION
0,1 %
CASING
ABS Plastic
SENSORS
Stainless Feather Steel Springs
Built in.
BATTERY
9 V alkaline, L6R22
CASE
Artificial Leather
SIZE (L x H x D )
150 x 71 x 25 mm
WEIGHT (INCL. BATTERY)
165 gram
WARRANTY
1 Year
Delivered complete with following accessories:
Battery and Carrying Case Manual in English, German and Swedish.
Technical modifications reserved
WWW.EXOTEK-INSTRUMENTS.COM