LOCAL ORGANIZING
COMMITTEE
Chairman
R. Bendikienė
Coordinator
A. Čiuplys
Members
E. Fataraitė
K.V. Mickus
L. Kavaliauskienė
E. Pupelis
International Scientific Committee
Prof. S. Tamulevičius (Chairman, Lithuania)
Dr. E. Badich (Austria)
Prof. M. Besterci (Slovakia)
Prof. S. Bočkus (Lithuania)
Habil. Dr. J. Grabis (Latvia)
Prof. S.-P. Hanulla (Finland)
Prof. M. Holtzer (Poland)
Prof. J. Jackowski (Poland)
Prof. V. Jankauskaitė (Lithuania)
Assoc. Prof. V. Jonaitienė (Lithuania)
Assoc. Prof. K. Juzėnas (Lithuania)
Prof. P. Kulu (Estonia)
Prof. J. Kübarsepp (Estonia)
Dr. R. Levinskas (Lithuania)
Dr. D. Loča (Latvia)
Prof. R. Michalczewski (Poland)
Prof. O.V. Tolochko (Russia)
Prof. R. Veinthal (Estonia)
Dr. A. Vilkauskas (Lithuania)
1
SCHEDULE OF THE CONFERENCE
Kaunas University of Technology, Cultural Centre, Laisvės Ave. 13, Kaunas
II floor Hall
8.00-9.30
Registration, I floor Lobby
9.30-10.30
Conference Opening
Plenary Session
VI floor Hall
II floor
Lobby
Coffee
Break
10.30-11.00
THURSDAY, 10/23
11.00-11.30 Poster Session A
11.30-13.00 ENGINEERING MATERIALS SURFACE ENGINEERING
I Session
I Session
Lunch
13.00-14.00
14.00-14.30 Poster Session B
14.30-15.30 ENGINEERING MATERIALS SURFACE ENGINEERING
II Session
II Session
Coffee
Break
15.30-16.00
16.00-17.00 ENGINEERING MATERIALS SURFACE ENGINEERING
III Session
III Session
FRIDAY, 10/24
19.00-22.00 Conference Dinner
Hotel Park Inn by Radisson Kaunas
Conference Centre, Alfa Hall, K. Donelaičio st. 27
2
9.00-10.45
10.30-11.30
ENGINEERING MATERIALS ADVANCED MATERIALS
IV Session
AND APPLICATIONS
I Session
Coffee, Conference Closing
Thursday, October 23
Kaunas University of Technology, Cultural Centre, Laisvės Ave. 13, Kaunas
8.00 – 9.30
Registration of Participants
I floor Lobby
9.30
Conference Opening
Plenary Session
II floor Hall
9.45
Materials Research: The Experience of Vilnius Gediminas
Technical University
Algirdas Vaclovas Valiulis
Lithuania, Vilnius Gediminas Technical University
10.00
National Open Access Scientific Center for Future Energy
Technologies; Opportunities and Outcomes
Rimantas Levinskas
Lithuania, Lithuanian Energy Institute
10.15
Method of Medical Devices Surface Modification to Inhibit
Bacterial Adhesion
Virginija Jankauskaitė
Lithuania, Kaunas University of Technology
10.30 – 11.00 Coffee Break
II floor Lobby
11.00 – 11.30 Poster Session A
II floor Hall (see Annex)
11.30 – 13.00 I session
II floor Hall
VI floor Hall
13.00 – 14.00 Lunch
VI floor Hall
14.00 – 14.30 Poster Session B
II floor Hall (see Annex)
14.30 – 15.30 II session
15.30 – 16.00 Coffee Break
16.00 – 17.00 III session
19.00 – 22.00 Conference Dinner
II floor Hall
VI floor Hall
II floor Lobby
II floor Hall
VI floor Hall
Hotel Park Inn by Radisson Kaunas
Conference Centre, Alfa Hall,
K. Donelaičio st. 27
3
SECTION
ENGINEERING MATERIALS
Thursday, October 23, II floor Hall
I session. Chairman prof. Stasys Bočkus
11.30
Strength Development And Physical Properties Of Cement Paste
With Incorporated Ceramic Powder
Tereza Kulovaná, Jaroslav Pokorný, Zbyšek Pavlík, Robert Černý
Czech Republic, Czech Technical University in Prague
11.45
An Alternative Route for the Production of Compacted Graphite Irons
12.00
Properties of Hydrophilic Mineral Wool for Desalination of
Historical Masonry
Kjell Wardenær, Chris Ecob, Cathrine Hartung
Norway, Elkem Foundry Product
Zbyšek Pavlík, Jaromír Žumár, Miloš Jerman, Robert Černý, Iñigo Antepara
Czech Republic, Czech Technical University in Prague
12.15
Moisture Dependent Thermal Properties of Hydrophilic Mineral
Wool: Application of the Effective Media Theory
Iñigo Antepara, Lukáš Fiala, Zbyšek Pavlík, Robert Černý
Czech Republic, Czech Technical University in Prague
12.30
Chemical Vapors Measurement in the Work Environment in
Wood, Metal and Rubber Manufacturing
Karin Reinhold, Ada Taraumann, Piia Tint
Estonia, Tallinn University of Technology
12.45
TiB2TiC/Ni/Diamond Composites Produced by the PPS Method
with the Participation of the SHS Reaction
Tomasz Truszkowski, Joanna Wachowicz, Marcin Rosińki
Poland, Warsaw University of Technology
4
II session. Chairman prof. Virginija Jankauskaitė
14.30
The Influence of Concrete Mixture Rheological Properties on
the Quality of Formed Concrete Surfaces While Changing the
Concentration of Fine Aggregate
Albertas Klovas, Mindaugas Daukšys, Lukas Venčkauskas
Lithuania, Kaunas University of Technology
14.45
Thermal Properties of High-Performance Concrete Containing
Fine-Ground Ceramics As a Partially Binder Replacement
Anton Trník, Lenka Scheinherrová, Tereza Kulovaná, Pavel Reiterman, Igor Medved´,
Eva Vejmelková, Robert Černý
Czech Republic, Czech Technical University in Prague
15.00
Effect of Alkaline Material Granule Size on Ability of Adjustment
the Buffer Capacity
Girts Bumanis, Kristine Rugele, Oskars Kurpnieks, Diana Bajare
Latvia, Riga Technical University, Institute of Materials and Structures
15.15
A Computational Analysis of Hygrothermal Performance of EnergyEffective Combinations of Construction Material and Plaster
Kamil Ďurana, Jiří Maděra, Miloš Jerman, Martina Benáková, Robert Černý
Czech Republic, Czech Technical University in Prague
15.30 – 16.00 Coffee Break
II floor Lobby
III session. Chairman prof. Oleg Tolochko
16.00
Effect of Sandstone Anisotropy on Its Heat and Moisture
Transport Properties
Jan Fořt, Zbyšek Pavlík, Kamil Ďurana, Robert Černý
Czech Republic, Czech Technical University in Prague
16.15
Thermal Properties of Cement Based Composites with MSWI Fly
Ash Accessed by Two Different Transient Methods
Jan Fořt, Anton Trník, Lenka Scheinherrová, Zbyšek Pavlík, Milena Pavlíková,
Robert Černý
Czech Republic, Czech Technical University in Prague
16.30
Microwave Asisted Synthesis, Modification With Platinum and
Photocatalytical Properties of TiO2 Nanofibers
Reinis Drunka, Janis Grabis
Latvia, Riga Technical University, Institute of Inorganic Chemistry
16.45
Development of Latent Heat Storage PCM Containing Plaster
Janis Kazjonovs, Andrejs Sipkevičs, Andris Jakovics, Andris Dancigs, Diana Bajare,
Leonards Dancigs
Latvia, Riga Technical University
5
SECTION
SURFACE ENGINEERING
Thursday, October 23 , VI floor Hall
I session. Chairman assoc. prof. Kazimieras Juzėnas
11.30
Cathodic Cage Plasma Nitriding of Ti6Al4V Alloy
11.45
Effect of TiB2 Additives on Wear Behavior of NiCrBSiC-Based Plasma
Sprayed Coating under Unlubricated Conditions
Maciej Ossowski, Tomasz Borowski, Tadeusz Wierzchon
Poland, Warsaw University of Technology
Oleksandr Umanskyi, Irina Hussainova, Maryna Storozhenko, O. Terentyev,
Maksim Antonov
Ukraine, National Aviation University, Airspace Institute
12.00
Wear Mechanisms on Nanocrystalline Diamond Films Observed
During Sliding Tests against Si3N4 Balls
Andrei Bogatov, Vitali Podgurski
Estonia, Tallinn University of Technology
12.15
Sliding Wear of NiAl-Based Coatings Reinforced by Borides
12.30
High Temperature Erosion Wear Resistance of Cermet Particles
Reinforced Self-Fluxing Alloy Matrix HVOF Sprayed Coatings
Oleksandr Umanskyi, Olena Poliarus, Maksym Ukrainets, Irina Hussainova,
Maksim Antonov
Ukraine, Frantsevich Institute for Problems of Material Science
Andrei Surzhenkov, Ahto Vallikivi, Rainar Traksmaa, Mart Viljus, Kristofer Talviste,
Aare Aruniit, Priit Kulu
Estonia, Tallinn University of Technology
12.45
Elementary Research on Preparation of B13C2 and BC2N
Superhard Compounds in Composite by Self-Propagating HighTemperature Synthesis
Lembit Kommel
Estonia, Tallinn University of Technology
6
II session. Chairman prof. Radomila Konečná
14.30
Surface Modification of Austenitic Steel by Various Methods of
Glow Discharge Nitriding
Tomasz Borowski, Bogusława Adamczyk-Cieślak, Agnieszka Brojanowska, Krzysztof
Kulikowski, Krzysztof Rożniatowski, Tadeusz Wierzchoń
Poland, Warsaw University of Technology
14.45
Wear of Different PVD Coatings at Industrial Fine-Blanking Trials
15.00
Tribological Characteristics of PVD Coatings Designed for
Applications at High Temperatures
Liina Lind, Priidu Peetsalu, Fjodor Sergejev
Estonia, Tallinn University of Technology
Michal Michalak, Remigiusz Michalczewski, Marian Szczerek, Demófilo Maldonado
Cortés, Carlos Sánchez Villarreal
Poland, Institute for Sustainable Technologies – National Research Institute
15.15
Comparison of Curvature, X-Ray and Nanoindentation Technique
for Measuring of Residual Stresses in Brush-Plated Nickel
Hardened Gold and Silver Coatings
Harri Lille, Jakub Kõo, Alexander Ryabchikov, Renno Reitsnik, Fjodor Sergejev,
Dmitri Matvejev
Estonia, Estonian University of Life Sciences
15.30 – 16.00 Coffee Break
II floor Lobby
III session. Chairman dr. Andrei Surzhenkov
16.00
Synthesis and Application of Tungsten – Based Nanoparticles
16.15
Characterization and Optimization of Parameters of the Thermal Arc
Sprayed Mn-Si-Cr-Mo-Ni Coatings and Wear Behavior
Ekaterina Vasilyeva, Alexander Breki, Albert Nasibulin
Russia, Saint-Petersburg State Polytechnical University
Justinas Gargasas, Sarunas Mikaliunas, Saulius Nagurnas, Algirdas Vaclovas Valiulis,
Irmantas Gedzevicius, Hanna Pokhmurska
Lithuania, Vilnius Gediminas Technical University
16.30
The Effect of WC/C Coating on Wear of Bevel Gears Used in Coal Mines
16.45
The Study of The System “Olive Oil-Steel” by Means of Physical
and Electrochemical Technique
Michal Michalak, Remigiusz Michalczewski, Andrzej Wieczorek
Poland, Institute of Mining Mechanization, Silesian Technical University
Henrikas Cesiulis, Juozas Padgurskas, Raimondas Kreivaitis, Raimundas Rukuiza,
Lhou Majidi
Lithuania, Vilnius University
7
NOTES:
8
Friday, October 24
Kaunas University of Technology, Cultural Centre, Laisvės Ave. 13, Kaunas
9.00-10.45
10.30-11.30
IV session
II floor Hall
I session
VI floor Hall
Coffee, Conference Closing
VI floor Hall
9
SECTION
ENGINEERING MATERIALS
Friday, October 24, II floor Hall
IV session. Chairman prof. Jānis Grabis
9.00
Measurement of Geometry and Deformation of Small Axissymmetric Sheet Metal Components after Forming
Henri Lend, Priidu Peetsalu, Kaarin Ratas
Estonia, Tallinn University of Technology
9.15
Neural Networks as a Tool to Characterise Oil State after Porous
Bearings Prolonged Tests
Artur Król, Krzysztof Gocman
Poland, Military University of Technology
9.30
Reactive Sintering of Bimodal WC-Co Hardmetals
9.45
Effect of Sodium Sulphate Solution Expossure on Mechanical
Characteristics of Different Kinds of Plasters
Marek Tarraste, Kristjan Juhani, Jüri Pirso, Mart Viljus
Estonia, Tallinn University of Technology
Jaroslav Pokorný, Milena Pavlíková, Zbyšek Pavlík
Czech Republic, Czech Technical University in Prague
10.00
Functionalization of γ-Alumina Nanofibers by α-Alumina and
Zirconia
Marina Aghayan, Michael Gasik, Lauri Kollo, Irina Hussainova, Miguel Rodríguez
Estonia, Tallinn University of Technology
10.15
10
Thermomechanical Analysis of Illite from Füzérradvány
Tomáš Húlan, Igor Štubňa, Anton Trník, Peter Bačík, Tiit Kaljuvee, Libor Vozár
Slovakia, Constantine the Philosopher University in Nitra
SECTION ADVANCED
MATERIALS AND APPLICATIONS
Friday, October 24, VI floor Hall
I session. Chairman prof. Remigiusz Michalczewski
9.00
Structure, Texture and Tensile Properties of Ti6Al4V Produced by
a Selective Laser Melting
Radomila Konečná, Gianni Nicoletto, Ludvík Kunz
Slovakia, University of Zilina
9.15
Mechanical Properties and Tribological Performance of New Hybrid
Copper-based Materials reinforced with Carbon Nanostructures
Oleg Tolochko, Tatiana Larionova, Tatiana Koltsova, Yuri Fadin
Russia, Saint Petersburg State Polytechnical University
9.30
Fibrillation of BCTMP of Aspen by Alkaline Cold Pre-Treatment
and Vibration Milling
Kärt Kärner, Matti Elomaa, Urve Kallavus
Estonia, Centre for Materials Research, Tallinn University of Technology
9.45
Metallic Coatings Manufacturing and Processing by Means of
Pulsed Electromagnetic Field
Mihails Lisicins, Viktors Mironovs, Vjaceslavs Lapkovskis, Irina Boiko,
Matthias Kolbe, Vjaceslavs Zemcenkovs
Latvia, Riga Technical University
10.00
Technological Peculiarities of TiC Cermets with FeCrMn Based
Binder
Märt Kolnes, Jakob Kübarsepp, Lauri Kollo, Mart Viljus
Estonia, Tallinn University of Technology
10.15
Testing of the Oscillations Damping Capability by External
Turning With the Use of Alternate Bars in the Construction of the
Turning Tool Holder
Marten Madissoo, Argo Rossner, Jüri Olt, Viacheslav Maksarov
Estonia, Estonian University of Life Sciences, Institute of Technology
11
Annex
POSTER PRESENTATIONS
II floor Hall
Poster Session A
Chairman assoc. prof. Lina Kavaliauskienė
A01 Some Exploitation Properties of Wood Plastic Composites (WPC) Based on
High Density Polyethylene and Timber Industry Waste
Janis Kajaks, Anita Zagorska, Artis Mežinskis
Latvia, Riga Technical University, Institute of Polymer Materials
A02 The Study of the Synthesis of Nanosized Refractory Carbides by
Carbothermal Reduction of Precursor Gels
Ilmars Zalite, Anita Letlena, Laila Cera
Latvia, Riga Technical University, Institute of Inorganic Chemistry
A03 The Role of the Raw Components on Compacting and Properties of Nanostructured Sialon Materials
Ilmars Zalite, Natalja Zilinska, Ints Steins
Latvia, Riga Technical University, Institute of Inorganic Chemistry
A04 The Dependance of Effectiveness of Incorporated Microencapsulated Phase
Change Materials on Different Structures of Knitted Fabrics
Sandra Varnaitė-Žuravliova, Sigitas Krauledas, Laimutė Stygienė, Gėlė Minkuvienė,
Audronė Sankauskaitė
Lithuania, Center for Physical Sciences and Technology
A05 Investigation of Electrical Characteristics of Conductive Woven Fabrics
Sandra Varnaitė-Žuravliova, Julija Baltušnikaitė, Lina Valasevičiūtė, Jonas Norkaitis, Rasa Verbienė
Lithuania, Center for Physical Sciences and Technology
A06 Database of Material Data as a Key Software for Computational Service Life
Assessment of Historical Buildings
Kamil Ďurana, Robert Černý
Czech Republic, Czech Technical University in Prague
A07 Investigation of Thermal Properties of Ceramic-Containing 3D Textile Materials
Diana Kubilienė, Audronė Sankauskaitė, Sigitas Krauledas, Ingrida Padleckienė,
Aušra Abraitienė, Kristina Dubinskaitė
Lithuania, SRI Textile Institute of Center for Physical Sciences and Technology
A08 Electrical Properties of Organic Semiconductors with Ionic Additives
Jakub Altšmíd, Tomáš Syrový, Lucie Syrová, Petr Kuberský, Aleš Hamáček, Oldřich Zmeškal,
Stanislav Nešpůrek
Czech Republic, Brno University of Technology
A09 Effect of Heat Treatment on Wettability and MOE of Pine and Spruce Wood
Povilas Navickas, Sandra Karpavičiūtė, Darius Albrektas
Lithuania, Kaunas University of Technology
12
A10 Distributed Multi-Sensor Real-Time Monitoring System with Remote Data
Access
Ivars Beinarts, Uldis Grunde, Andris Jakovics
Latvia, Riga Technical University
A11 Temperature Distribution Simulation of a Polymer Bearing Basing on the
Real Tribological Tests
Artur Król, Krzysztof Kasza
Poland, Military University of Technology
A12 Application of Ceramic Powder as Supplementary Cementitious Material in
Lime Plasters
Monika Čáchová, Dana Koňáková, Eva Vejmelková, Martin Keppert, Pavel Reiterman, Robert Černý
Czech Republic, Czech Technical University in Prague
A13 Air Entrained Concrete Produced with Natural Zeolite Addition Cement
Monika Čáchová, Dana Koňáková, Eva Vejmelková, Martin Keppert, Kirill Polozhyi,
Adam Hubáček, Pavla Rovnaníková, Robert Černý
Czech Republic, Czech Technical University in Prague
A14 Reflecting and Polarizing Properties of Conductive Fabrics in Ultra-High
Frequency Range
O. Kiprijanovič, S. Ašmontas, Jonas Matuzas, L. Valasevičiutė, S. Varnaitė-Žuravliova
Lithuania, Center for Physical Sciences and Technology, Semiconductor Physics Institute
A15 The Influence of Calcium Nitrate on the Plasticifiering Effect of Cement Paste
Gintautas Skripkiūnas, Asta Kičaitė, Mindaugas Macijauskas
Lithuania, Vilnius Gediminas Technical University
A16 Dynamic and Acoustic Properties of Cenosphere Reinforced Epoxy-Based
Composides for the Repair of Main Pipelines Via Composite Sleeve
Sergey Bukharov, Evgeny Barkanov, Vjacheslav Zemchenkov, Viktor Mironov, Vladimir Sergienko,
Andrew Shishkin
Latvia, Riga Technical University
A17 Tribological Properties of WCCo/cBN Composites Produced by Pulse Plasma
Sintering
Joanna Wachowicz, Tomasz Truszkowski, Marcin Rosinski, Maciej Ossowski, Grzegorz Skrabalak
Poland, Warsaw University of Technology
A18 The Influence of Sintering Temperature of Reactive Sintered (Ti, Mo)C-Ni
Cermets
Marek Jõeleht, Jüri Pirso, Kristjan Juhani, Mart Viljus
Estonia, Tallinn University of Technology
A19 Characterization of Alkyl Quaternary Ammonium Layered Silicates by XRD
Analysis and BET Measurements
Arūnas Baltušnikas, Irena Lukošiūtė, Rimantas Levinskas, Jūratė Čėsnienė, Kristina Brinkienė,
Regina Kalpokaitė-Dičkuvienė
Lithuania, Lithuanian Energy Institute
A20 Structural Characterisation of P91 Steel after Thermal Ageing
Albertas Grybėnas, Arūnas Baltušnikas, Rita Kriūkienė, Irena Lukošiūtė, Vidas Makarevičius
Lithuania, Lithuanian Energy Institute
13
Poster Session B
Chairman prof. Edmundas Pupelis
B01 Study of Optical and Electrical Properties of Organic Thin Films for
Photovoltaic Applications
Jan Pospisil, Veronika Schmiedova, Oldrich Zmeskal, Jiri Cerny
Czech Republic, Brno University of Technology
B02
Formation of High Temperature Compounds in W-C-B System by Reactive
Spark Plasma Sintering
Jānis Grabis, Ints Šteins, Inta Sīpola, Dzintra Rašmane
Latvia, Riga Technical University, Institute of Inorganic Chemistry
B03
Effect of Annealing Temperature on Residual Stresses Obtained by the
Hole-Drilling Method
Renno Reitsnik, Stanislav Toropov, Alexander Ryabchikov, Priidu Peetsalu
Estonia, Estonian University of Life Sciences
B04
Hybrid Aluminum Composite Materials Based On Carbon Nanostructures
B05
UV-activated Polymerization Composite Coatings
B06
Influence of Nitriding Temperature on Surface Structural Characteristics
and Fatigue Strength of Steel
Tatiana Koltsova, Kristina Lycheva, Fedor Shakhov, Alexey Vozniakovski
Russia, Saint Petersburg State Polytechnical University
Zane Grigale-Sorocina, Martins Kalnins, Jana Simanovska
Latvia, Riga Technical University, Institute of Polymer Materials
Valdas Kvedaras, Antanas Čiuplys
Lithuania, Klaipėda University
B07
Corrosion Resistance of Ni/Al2O3 Nanocomposite Coatings
B08
Influence of Nitrided Layer on the Properties of Carbon Coatings Produced
on X105CrMo17 Steel under DC Glow-Discharge Conditions
Jerzy Robert Sobiecki, Beata Kucharska, Karol Poplawski
Poland, Warsaw University of Technology
Tomasz Borowski, Maciej Ossowski, Piotr Kowalczyk, Maciej Dubek, Agnieszka Brojanowska,
Krzysztof Rożniatowski, Tadeusz Wierzchoń
Poland, Warsaw University of Technology
B09
Surface Modifications of Ti6Al4V Alloy and 440C Steel Intended for Hybrid
Rolling Bearings for Space Applications
Remigiusz Michalczewski, Witold Piekoszewski, Anita Mańkowska-Snopczyńska, Jan Wulczyński,
Maciej Ossowski
Poland, Institute for Sustainable Technologies – National Research Institute
B10
Effects of Surface Alloying and Laser Beam Treatment on the Microstructure
and Wear Behaviour of Surfaces Modified Using Submerged Metal Arc Welding
Regita Bendikienė, Edmundas Pupelis, Lina Kavaliauskienė
Lithuania, Kaunas University of Technology
14
B11
Aluminum Based Composite by Self Propagating High Temperature Synthesis
B12
Obtaining of SiC Fine Powder from the Used Heating Elements by Milling
and Grinding by High-Energy Disintegrator
Agus Pramono, Lembit Kommel, Lauri Kollo, Renno Veinthal
Estonia, Tallinn University of Technology
Viktors Mironovs, Dmitri Goljandin, Andrei Shishkin, Janis Baronins, Elina Indriksone
Latvia, Riga Technical University
B13
Obtaining and Characterization of Peat-Cenosphere Composite Sorbent with
Magnetic Properties
Andrei Shishkin, Juris Treijs, Viktors Mironov, Edmunds Teirumnieks
Latvia, Riga Technical University
B14
Development of Testing Method for Determination of Drawing Out Force of
Knitted Fabrics’ Ravel Course Yarns
Kristina Dubinskaitė, Sigitas Krauledas, Diana Kubilienė, Jonas Norkaitis
Lithuania, Textile Institute of Center for Physical Sciences and Technology
B15
Influence of Optimised Jet Milling Parameters to the Magnetic Properties of NdFe-B Sintered Magnets
Zorjana Mural, Lauri Kollo, Märt Kolnes, Joosep Link, Renno Veinthal
Estonia, Tallinn University of Technology
B16
Thermal Stability of Austempered Ductile Iron Evaluated in a Temperature
Range of 20-300K
Dawid Myszka, Maciej Kowalczyk, Andrzej Wieczorek
Poland, Institut of Mining Mechanization, Silesian Technical University
B17
Decarburization Effect on Hardened Strip Steel Fastening Components
B18
Superhard Composite Material Based on Nanodispersed Carbon
B19
Protective Nanocomposite Vacuum Coatings Deposited by Separated
Plasma Flows
Karli Jaason, Priidu Peetsalu, Mart Saarna, Priit Kulu
Estonia, Tallinn University of Technology
Dmitry Kuis, Vladimir Urbanovich, Galina Okatova, Nicolay Svidunovich, Vladimir Oichenko
Republic of Belarus, The Belarusian State Technological University
Svetlana D. Latushkina, Dmitri V. Kuis, Alexei G. Zhizhchenko, Pavel V. Rudak, Olga I. Posylkina,
Olga Y. Piskunova
Republic of Belarus, The Belarusian State Technological University
B20
Wear Resistance of 100CrMnSi6-4 Bearing Steel after Laser Ablation Texturing
B21
The Usefulness Analysis of the Model Stand Tester WAT-1 in Tribological Research
B22
Influence of Micro Lubricating Pockets Geometry on Tribological Effects of
Surface Layer of 100CrMnSi6-4 Steel after Laser Ablation Texturing
Wojciech Napadlek, Adam Wozniak, Czeslaw Pakowski, Wojciech Chrzanowski
Poland, Military University of Technology
Wojciech Napadlek, Adam Wozniak, Czeslaw Pakowski, Wojciech Chrzanowski
Poland, Military University of Technology
Wojciech Napadlek, Adam Wozniak, Czeslaw Pakowski, Wojciech Chrzanowski
Poland Military University of Technology
15
NOTES:
16