1. No category

CONSOLE SYSTEM
JUAL WHEN THE SUN
DOESN’T SHINE
INSTALLATION GUIDELINE
JUAL ROOF CONSOLE
(Cold roof - wooden rafter)
Rev.2-2012
(Vær opmærksom på opdateringer! - www.jual.dk)
Installation guideline
JUAL A/S
Symbol description
Drill Driver with a Ø6 mm wooden drill
Drill Driver with a TX40 bit driver
Gas torch
Manual handling
Pay attention!
Loosening operation
(anti clock wise rotation)
Tightning operation
(clock wise rotation)
JUAL A/S // Industrivej 14 // DK-7130 Juelsminde // Tel. +45 76 83 11 33 // FAX. +45 75 69 37 37 // [email protected] // www.jual.dk
JUAL A/S
Installation guideline
JUAL Roof Console cold roof
JUAL A/S // Industrivej 14 // DK-7130 Juelsminde // Tel. +45 76 83 11 33 // FAX. +45 75 69 37 37 // [email protected] // www.jual.dk
JUAL A/S
Installation guideline
1.
Rafter predrilling
← ← Ø 6 mm
←
MIN. 100 mm!
←
←
Min 3 x Screw diameter
←
JUAL A/S // Industrivej 14 // DK-7130 Juelsminde // Tel. +45 76 83 11 33 // FAX. +45 75 69 37 37 // [email protected] // www.jual.dk
JUAL A/S
Installation guideline
2.
Fixation of the
Console Adapter
Pay Attention
A standard wooden screw
should be used to fix the
Console Adapter against
rotationel movement during the
installation.
Torx 40 JUAL A/S // Industrivej 14 // DK-7130 Juelsminde // Tel. +45 76 83 11 33 // FAX. +45 75 69 37 37 // [email protected] // www.jual.dk
JUAL A/S
Installation guideline
3.
Fixation of the Console with
the Compression Ring
4.
Roof Console
Tightening

Pay Attention
The Connection Interface
must be correctly aligned.
JUAL A/S // Industrivej 14 // DK-7130 Juelsminde // Tel. +45 76 83 11 33 // FAX. +45 75 69 37 37 // [email protected] // www.jual.dk
JUAL A/S
Installation guideline
5.
Torching
JUAL A/S // Industrivej 14 // DK-7130 Juelsminde // Tel. +45 76 83 11 33 // FAX. +45 75 69 37 37 // [email protected] // www.jual.dk