LIWREAproduct productrepresented representedby byAVHIL AVHILs.a.s. s.a.s. LIWREA ViaProvinciale Provincialealle alleValli, Valli,20 20--24048 24048Treviolo Treviolo(BG) (BG)--ITALY ITALY Via www.avhil.com--VAT: VAT:ITIT03630830168 03630830168 www.avhil.com LIWREA,prodotto prodottodistribuito distribuitodalla dallasocietà societàAVHIL AVHILs.a.s. s.a.s. LIWREA, ViaProvinciale Provincialealle alleValli, Valli,20 20--24048 24048Treviolo Treviolo(BG) (BG)--ITALIA ITALIA Via www.avhil.com P.IVA: IT 03630830168 www.avhil.com - P.IVA: IT 03630830168 WR3WHITEM / WR3BLACKM/ WR3GREENM / WR3BROWNM / WR3BEIGEM / WR3BLUEM WR3 OPACO/ /WR3ORANGEM BIANCO -/NERO - VERDE MILITARE - MARRONE - BEIGE - GRIGIO WR3YELLOWM WR3REDM / WR3AZUREM / WR3SILVERM / WR3COPPERM / WR3GLITTERM BLU - ARANCIONE - ROSSO - AZZURRO - ARGENTO METALLIZZATO - RAME METALLIZATO - GLITTER DATA SHEET WR3 COLOURED MATT GLITTER WR3GLITTERM COPPER WR3COPPERM SILVER WR3SILVERM AZURE RAL 5012 WR3AZUREM RED RAL 3000 WR3REDM ORANGE RAL 2001 WR3ORANGEM YELLOW RAL 1016 WR3YELLOWM BLUE RAL 5003 WR3BLUEM GREY RAL 7025 WR3GREYM BEIGE RAL 1019 WR3BEIGEM BROWN RAL 8016 WR3BROWNM ARMY GREEN RAL 6003 WR3GREENM BLACK RAL 9011 WR3BLACKM WHITE RAL 9010 WR3WHITEM COLORS AVAILABLE DESCRIPTION It is a water-based, solvent-free product without harmful substances. It forms a removable protective film that protects the bodywork from any impact, friction, abrasions, gravel, tar, oil and bugs. It can be applied on all smooth, glossy and non-absorbent surfaces such as car bodies, motorcycle fairings, alloy wheels, lights, windshields, glass parts.Can be applied on all surfaces such as: -AUTOMOTIVE CHANNEL: Body of car, motorcycle fairings, alloy wheels, lights, trains, buses and subways, public transportation, bicycles, etc. -BUILDING CHANNEL: glass, fixtures, furniture, furnishings, flooring, etc.. -SPORT CHANNEL: snowboarding, skiing, surfing, helmets, motor rally, skateboarding, etc.. PERFORMANCE - Easy to apply and remove; - water-repellent and waterproof; - very elastic, impact and abrasion resistant; - resistant to aggressive and corrosive substances; - sun and weather resistant; - resistant to automatic and hand car washes; - it does not damage painted surfaces, stickers or decals; - it can be painted over; - It’s self-leveling. LIWREA product represented by AVHIL s.a.s. Via Provinciale alle Valli, 20 - 24048 Treviolo (BG) - ITALY www.avhil.com - VAT: IT 03630830168 LIWREA, prodotto distribuito dalla società AVHIL s.a.s. Via Provinciale alle Valli, 20 - 24048 Treviolo (BG) - ITALIA www.avhil.com - P.IVA: IT 03630830168 WR3WHITEM1L WR3WHITEM / WR3BLACKM1L / WR3BLACKM/ / WR3GREENM1L WR3GREENM / WR3BROWNM1L / WR3BROWNM / WR3BEIGEM1L / WR3BEIGEM/ /WR3BLUM1L WR3BLUEM WR3YELLOWM WR3ORANGEM1L / WR3ORANGEM / WR3REDM1L / WR3REDM / WR3AZUREM1L / WR3AZUREM / WR3SILVERM1L / WR3SILVERM / WR3COPPERM1L / WR3COPPERM / WR3GLITTERM1L / WR3GLITTERM DURABILITY In normal conditions of use, the temperature, humidity and exposure to the sun, the peelable film has a resistance of about 24 months, after which phenomena may occur yellowing and stiffening of the film, difficulty in peeling, possible small detachments. WARRANTY LIWREA guarantees against yellowing, difficulty peelability and stiffening for a duration of approximately 12 months. The guarantee applies only if the application has been carried out according to LIWREA (see paragraphs PRODUCT’S PREPARATION and APPLICATION). PERFORMANCE AND THICKNESS With 250 ml of concentrated product you will cover 4 sqm by applying 3 crossed hands, with a thickness of 200/180 micron wet and a thickness of 140/120 micron dry. PREPARATION OF SURFACE All surfaces should be dry and clean, free from dust, moisture and grease marks. PRODUCT'S PREPARATION CKeep the product away from frost and protected from heat sources. The product is supplied ready for use and does not require dilution. Dilution is allowed (from 5% to 15% of pure water) only in exceptional cases to adjust viscosity. The best product consistency should be like a yogurt (ford cup, diameter 8 mm, 15 to 30 seconds). APPLICATION To get the best result, LIWREA recommends using the low-pressure spray gun, Slim HTE HD WALMEC with a nozzle 1.7 (code LW1010) and input pressure of 2 bar. In the download section of the website LIWREA (www.liwrea.com), there is a manual to better adjust the instrument. The air compressor must have at least a capacity of 300 liters of air per minute and 3/4 horsepower. If you wish to use a different gun, we generally recommend: Nozzles 2,2 / 2,4 mm; Input pressure equal to 3/4 bar. IDEAL APPLICATION CONDITIONS To ensure a good final appearance it is important to follow these recommendations: - Do not apply the product where room temperature is too low (<10 ° C). - Do not apply on cold and frozen surfaces, nor on hot surfaces due to sun exposure. - Ideal room and product temperatures range from 15 to 25°C. - The minimum wet film thickness must not be less than 200 microns. During application on car bodywork or fairings, check product thickness near the slots that separate the various parts of the body and on any parts that are difficult to paint because of their shape. It is advisable to apply a thicker layer or, if possible, to mask any difficult areas with tape in order to create a straight edge of paint, which will be more solid and therefore easier to remove in the future. LIWREA product represented by AVHIL s.a.s. Via Provinciale alle Valli, 20 - 24048 Treviolo (BG) - ITALY www.avhil.com - VAT: IT 03630830168 LIWREA, prodotto distribuito dalla società AVHIL s.a.s. Via Provinciale alle Valli, 20 - 24048 Treviolo (BG) - ITALIA www.avhil.com - P.IVA: IT 03630830168 WR3WHITEM / WR3BLACKM/ WR3GREENM / WR3BROWNM / WR3BEIGEM / WR3BLUEM WR3YELLOWM / WR3ORANGEM / WR3REDM / WR3AZUREM / WR3SILVERM / WR3COPPERM / WR3GLITTERM USING OF THE TAPE AND MASKING For masking surface normal use masking tape VIBAC (code LW1130, LW1140, LW1150, LW1160, LW1170). After the application proceed to the removal of the adhesive tape within a few minutes. DRYING TIME The product dries naturally. At a room temperature of 20°C and relative humidity of 70%, the wet film becomes completely dry after about 2 hours. The coating can also be baked at 30-40°C for 20 minutes using an oven or a heat lamp. The film becomes removable without residue after at least 6 hours of drying. CHEMICAL AND PHYSICAL SPECIFICATIONS Viscosity at 25°C in 6 mm Ford Cup Specific weight Solid content Sec +- 2 kg/dmc +- 0.1 pp/100 +- 5 Nature of binder Natura of pigment VOC Polyurethane Oxid and synthetics g/l 0 30 1.00 58
© Copyright 2024