1. No category

PROJECT INFORMATION
TYPE:
PROJECT:
CATALOG#:
6" IC LED Housing (9W/16W) w/ 6" Deep LED Reflector
6" 9W/16W (1 LED SERIES)
7 1/2"
6"
7 1/2"
10 1/2"
SPECIFICATION
FEATURE:
Ceiling cut-out: 6 1/2"
Application: This energy efficient General Purpose recessed LED housing is perfect for low
to medium height ceilings in residential and light commercial applications. A variety of trim
styles, finishes, beam spreads and wattages are available to achieve a desired look and
lumen output.
Mounting: Housing suitable for new construction installations only, supplied with (2) 24"
adjustable hanger bars with 90 degrees repositioning ability. Hanger bars equipped with
nail-less install 3/4" serrated barbed studs and with captive nails, for faster and easier
secure mounting in wood joists. Set-screws lock into position and prevent shifting after
installation. Earthquake structural cable compatible for drop panel ceiling or any other
mounting that requires direct support from structural ceilings.
Power Connection: LED heat sinked lamp module is replaceable via onboard quick
exclusionary disconnect terminal. No tools required. Meets CA Title 24 Requirements and
other standards restricting the use of Medium Base or Bi-Pin Sockets.
Driver: Electronic Direct Current U.L. Listed driver mounted away from LED Array for cool
operation and end-of-life modularity. Comes standard with 120VAC input and available
with optional 120V/277V universal voltage input.
Dimming: '-DIN' dimming option smoothly dims down to 5% of initial light output with
flicker-free performance. Works with standard incandescent dimmers. Factory qualified for
use with Lutron brand dimmers: S600PR, DVSCCL-153P & DV600PR as well as Leviton
IP106-600W. Works with standard electronic low voltage (ELV) dimmers. Factory qualified
for use with Lutron brand dimmers: SELV300P, DVELV-300P, MAELV-600 and NELV-450. 'D10' dimming option works with most 0-10V DC 5-wire 120V or 277V dimming systems
and wall box dimmers.
Mounting: Steel pressure springs mounted on trim to ensure
positive retention inside housing.
Power Connection: LED heat sinked lamp module is replaceable
via onboard quick exclusionary disconnect terminal. No tools
required. Meets CA Title 24 Requirements and other standards
restricting the use of Medium Base or Bi-Pin Sockets.
Lumen Maintenance: Minimum 35,000 hours L70 life based on
ANSI TM-21 calculations from LM80 standardized test results.
Thermal Management: Effective thermal dissipation facilitated by
integral cast-aluminum, finned heat sink design for maximum
heat rejection to provide long LED life.
Color Temperature
Temperature: LED Diodes comes standard in warm white
3,000K +/- 100K
Also available in 4,000K as special order. Consult factory,
extended lead times or minumum order quantities may apply.
Warranty: Covered by a 3 Year Warranty to be free of defects in
materials and craftsmanship. Recommended for applications
where ambient temperatures do not exceed 35°C, installations
exceeding this temperature will result in reduced LED lamp life
and a voided warranty.
Label: cETL Listed
2014.10.16
Junction Box
Box:16 gauge pre-wired galvanized steel Junction Box, 32 cubic-inch for a
maximum of (8) #12 AWG wires. Furnished with (7) 3/4" and (4) Romex knock-outs. Strain
clamps to install or remove covers for easy access and ground wire. Equipped with safety
standard fitting for flex-conduit.
Limitation: Not for use w/Shallow Housings.
Assembled in USA
Insulation Contact: Energy Efficient LED housing comes standard with IC rating for direct
contact with loosefill blown and rolled insulation.
Airflow: Airtight option is designed to restrict air flow from room into plenums in compliance
to the WSEC - Washington State Energy Code, (Less than 2.0 CFM -Cubic Feet per
Minute). Complies to Title24 air flow requirements (Air-tight).
Safety Labels: ETL/CETL listed. Suitable for damp locations. NYC approved: Calendar
#41937.
6" IC LED HOUSING (9W/16W)
LHLDH6 9W/16W LED
6" DEEP LED REFLECTOR
LRLDH621 9W/16W LED
5 5/8"
7 3/8"
Ordering example: LHLDH616C35/LRLDH621SSF-B60
REFLECTOR FINISH
BEAM SPREAD
LRLDH621WWF :All White
-B25:Narrow Flood
LRLDH621SSF :All Satin Haze
-B45:Flood
LRLDH621CWF :Clear Reflector/White Ring -B60:Wide Flood
LRLDH621BBF :All Black
ID#: 2463_2459
WATTAGE
DRIVER TYPE
OPTIONS
LHLDH609C35 :9W Blank :None
Blank :None
LHLDH616C35 :16W -DIN :Incandescent/ELV Dimming
-EM :Emergency Back-up (6W)
UE
:120V/277V
UE-D10 :0-10V Dimming (120V/277V)
UE-DHL :Hilume Dimming (120V/277V)
5"
A
Tel: 323.904.0200
Product specifications subject to change without notice.
File Located online www.liton.com/spec
Emergency Option: Remote Emergency Battery Back-up for minimum 90 minute operation.
Mounted adjacent to fixture during installation. Remote test switch, plate cover and junction
box included. See ordering guide for battery operated wattage. Damp location rated.
120V/277V AC operation.
Application:
Application:This energy efficient LED Reflector Trim produces up
to 1200 lumens and is suited for medium to high ceilings in light
commercial and residential applications. The LED has been
deeply recessed for minimal glare. A variety of trim finishes are
available.
www.liton.com
D I V I S I O N
L I G H T I N G
O F
G R O U P
6" Downlight Deep Reflector
Test Procedure: LM-79-08
Total Rated Fixture Lumen :1153
Total Luminaire Efficacy
:75 Lm/W
Luminous Diameter
:0.50"
LED DETAILS
By:
Light Laboratory, Inc.
Light Source Specification
Input Power (W)
:15.47W
Color Rendering Index (CRI) :88
Color Temperature
:3,000K
16W 60° Optic
LRLDH621
ZONAL LUMEN SUMMARY
ZONAL LUMENS SUMMARY
CD./SQ.M (FOOTLAMBERTS)
Zone
90°
Lumens
0 - 10
10 - 20
20 - 30
30 - 40
40 - 50
50 - 60
60 - 70
70 - 80
80 - 90
90 - 100
100 - 110
110 - 120
130 - 140
140 - 150
150 - 160
160 - 170
170 - 180
82.39
199.54
245.05
253.53
223.33
120.48
18.88
6.48
3.01
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Zone
80°
230
0 - 30
0 - 40
0 - 60
0 - 90
10 - 90
20 - 40
40 - 70
60 - 80
0 - 180
70°
459
60°
50°
689
919
40°
0°
10°
20°
Lumens
30°
% Fixt
526.98
780.51
1124.32
1152.69
1070.3
498.58
362.69
25.35
1152.69
24.50
67.70
97.50
100.00
92.90
43.30
31.50
2.20
100.00
HORIZONTAL FOOT CANDLES: FC VALUES
Height (ft.)
4.0'
6.0'
8.0'
10.0'
CANDELA TABULATION
Beam Diameter
26.0'
34.0'
39.0'
46.0'
Foot Candle
57.43 fc
25.52 fc
14.36 fc
9.19 fc
LUMINANCE SUMMARY CD./SQ.M.
CD./SQ.M (FOOTLAMBERTS)
LUMINANCE DATA (CD./SQ.M)
Angle
Luminance
Angle
Avg. 0-Deg
Avg. 45-Deg
Avg. 90-Deg
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
918.88
914.38
899.82
876.79
847.15
811.39
772.73
733.27
694.33
655.84
617.11
580.84
547.22
516.19
487.38
460.64
436.60
415.00
394.92
374.95
353.17
331.73
306.52
278.28
45
55
65
75
85
22648
13417
2058
1151
1967
22648
13417
2058
1151
1967
22648
13417
2058
1151
1967
COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD
EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20
70
119
112
105
98
91
85
80
75
70
66
62
80
50 30
119 119
109 106
99 94
90 84
82 75
75 68
69 61
63 56
59 52
55 48
51 44
70
10 70 50 30 10
119 116 116 116 116
103 110 106 104 101
90 102 97 92 89
79 96 88 83 78
70 89 81 74 69
62 83 74 67 62
56 78 68 61 56
51 73 63 56 51
47 69 58 51 46
43 65 54 47 43
39 61 50 44 39
50
111
102
94
86
78
72
66
61
57
53
50
50
30
111
100
90
81
73
66
60
55
51
47
43
10
111
98
87
77
68
62
56
51
46
43
39
50
106
99
91
83
76
70
65
60
56
52
49
30
30
106
97
87
79
71
65
59
54
50
46
43
10
106
95
85
76
68
61
55
50
46
42
39
50
102
95
88
81
74
68
63
59
55
51
48
10
30
102
94
85
77
70
64
59
54
50
46
43
10
102
92
83
74
67
60
55
50
46
42
39
0
0
100
91
81
72
65
59
53
48
44
41
37
11.05.2012
RC
RW
0
1
2
3
4
5
6
7
8
9
10
“The Complete Lighting Solution”
Visit us at : www.liton.com
Product specifications subject to change without notice.