http://support.automation.siemens.com/WW/view/en/98278416 CANopen application for WinAC RTX Realtime application for WinAC RTX General Supported CAN-Interfaces: The CANopen application for WinAC RTX is based on WinAC CAN basic driver. - On-board CAN Microbox IPC427B/C/D - On-board CAN Nanobox IPC227D - PCI104 Board COM168 V2 The applications generator allows to configure the devices in a comfortable way and generates the functionsblocks. The WinAC is already configured as CANopen Master. Functionality The user interface of the application is created for a simple use to modify the device parameter. The application generator creates the required function blocks. These function blocks will be integrated in the delivered TIA-Portal project. The WinAC RTX is located as the Master in the CANopen network and manages the communication between the configured devices. Procuct contents - Realtime driver(.rtdll) - Step7 v12 Project (FBs/FCs) - Application-Generator - Documentation Contact Siemens AG GER I CS WEST PRS-APCIA Competence Center Cologne Franz-Geuer-Straße 10 D-50823 Cologne Tel: +49 221 576-3026 Fax: +49 221 576-2936 [email protected] http://www.siemens.com/industry