Series SWN Piston rod cylinder ► Mini cylinder Brochure

Piston rod cylinder ► Mini cylinder
Series SWN
Brochure
2
Piston rod cylinder ► Mini cylinder
Series SWN
Screw-in cylinder, Series SWN
► Ø 6 - 16 mm ► Single-acting, retracted without pressure
3
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-10-17, ©AVENTICS S.a.r.l., subject to change
3
Piston rod cylinder ► Mini cylinder
Screw-in cylinder, Series SWN
► Ø 6 - 16 mm ► Single-acting, retracted without pressure
00106502
Working pressure min./max.
2 bar / 8 bar
Ambient temperature min./max.
-20°C / +80°C
Medium temperature min./max.
-20°C / +80°C
Medium
Compressed air
Max. particle size
5 µm
Oil content of compressed air
0 mg/m³ - 1 mg/m³
Pressure for determining piston forces
6 bar
Materials:
a68
Cylinder tube
Aluminum, anodized
Piston rod
Stainless steel
Front cover
Polyoxymethylene
Nut for piston rod
Steel, galvanized
Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ Please see the table of dimensions for information on the spring forces.
Piston Ø
Extracting piston force
[mm]
[N]
Piston Ø
Weight [kg]
6
15
10
38
16
100
Stroke 5
6
10
16
0822406900
0822406910
0822406920
10
0822406901
0822406911
0822406921
15
0822406902
0822406912
0822406922
Piston Ø
Stroke 5
6
0.01
10
16
0.018
0.04
10
0.01
0.02
0.043
15
0.011
0.022
0.046
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-10-17, ©AVENTICS S.a.r.l., subject to change
4
Piston rod cylinder ► Mini cylinder
Screw-in cylinder, Series SWN
► Ø 6 - 16 mm ► Single-acting, retracted without pressure
Dimensions
EE
KK
DE -f8
BE
KW
MM -f7
KY
SW1
L4
WH
BF+S
L3
SW2
WF+S
A
SW3
ZB+S
00106504
S = stroke
Piston Ø
S
A
7
M10x1
BE
BF
DE 1)
F 2)
F 3)
EE
KK
KW
KY
L3
6
2.5
6
10
7
M10x1
9.5
7.6
1.7
3
M5
M3
3.5
1.8
6
2.5
6
15
7
M10x1
9.5
7.6
1.5
3
M5
M3
3.5
1.8
6
2.5
10
5
10
M16x1,5
8.5
12
6.1
6.1
M5
M4
4
2.2
7
3
10
10
10
M16x1,5
8.5
12
5.3
6.1
M5
M4
4
2.2
7
3
10
15
10
M16x1,5
8.5
12
4.3
6.1
M5
M4
4
2.2
7
3
16
5
12
M22x1,5
12
18.5
13
15.5
M5
M5
5
2.7
7
3.5
16
10
12
M22x1,5
12
18.5
10.5
15.5
M5
M5
5
2.7
7
3.5
16
15
12
M22x1,5
12
18.5
8
15.5
M5
M5
5
2.7
7
3.5
6
5
7.5
7.6
1.9
3.9
Piston Ø
MM
SW1
SW2
SW3
WF ±0,2
WH
ZB
6
3.5
5.5
9
13
15.5
1.5
17
6
3.5
5.5
9
13
15.5
1.5
17
10
5
7
13
19
15.5
2
17.5
10
5
7
13
19
15.5
2
17.5
10
5
7
13
19
15.5
2
17.5
16
6
8
19
27
18.5
2
20.5
16
6
8
19
27
18.5
2
20.5
16
6
8
19
27
18.5
2
20.5
6
3.5
5.5
1) Recommended receiving bore DE
2) Spring force [N] min.
3) Spring force [N] max.
9
13
13.5
1.5
M5
M3
3.5
1.8
L4
15
h7
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2014-10-17, ©AVENTICS S.a.r.l., subject to change
Aventics GmbH
Ulmer Straße 4
30880 Laatzen
Phone +49 511 2136-0
Fax +49 511 2136-269
www.aventics.com
[email protected]
Find more contact information at
www.aventics.com/contact
Only use the AVENTICS products
shown in industrial applications.
Read the product documentation
completely and carefully before using
the product.
Observe the applicable regulations
and laws of the respective country.
When integrating the product into
applications, note the system
manufacturer’s specifications for safe
use of the product.
The data specified only serve to
describe the product.
No statements concerning a certain
condition or suitability for a certain
application can be derived from our
information.
The information given does not
release the user from the obligation
of own judgment and verification.
It must be remembered that the
products are subject to a natural
process of wear and aging.
17-10-2014
An example configuration is depicted on the title page. The delivered product may thus vary from that in the illustration.
Subject to change. © AVENTICS S.à.r.l.. This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of AVENTICS S.a.r.l.. It may not be reproduced or given to third parties without its
consent. PDF online