1. No category

Domestic and
Commercial Pumps
Waterco Pumps
2
The pump is at the heart of all swimming pool water filtration systems, and choosing the
correct pump for your pool will make a huge difference in terms of hygiene, appearance and
running costs.
Whether you’re after a pump for a new pool, or a replacement for an existing pool, Waterco has a great range of
energy‑efficient models to choose from. Incorporating the latest technology to deliver the right combination of performance
and energy savings, Waterco’s pumps are reliable and built to the highest standards.
Efficient Impeller and Diffuser Design
The impeller and diffuser design maximises the hydraulic output of the pump while minimising turbulence. The efficient
hydraulic performance shortens run times and reduces energy consumption leading to lower operating costs.
Engineered Durability
The pump body is manufactured utilising state of the art engineering plastic moulding with a single piece strainer pot and
volute for extra strength.
A high grade 316 stainless steel mechanical seal is incorporated for extra protection against corrosion from:
• Chlorinated water
• Ozone
• Iodine
• Baquacil
• Bromine
• Salt water chlorination
Motor Pump Protection Bracket
Situated between the pump wet end and the pump motor, a mechanical seal forms a seal around the motor shaft to prevent
water from travelling along the motor’s shaft.
The mechanical seal is the wearing part of any pool pump. A mechanical seal may leak water if the pump is ever run dry or
simply worn out.
The “Motor Protection Bracket” adds a 60.5 mm separation between the pump’s wet end and its motor. It is designed to
protect the pump motor by draining any leaks from a worn mechanical seal.
Warranty
Waterco pumps are covered by a 3 year warranty on the pump wet end, 2 year warranty on the pump motor and 1 year
warranty on the mechanical seal. Waterco commercial pumps are covered by a comprehensive 1 year warranty for
commercial installations.
3
Waterco Pumps
1
4
6
3
2
9
7
5
8
10
1
2
3
4
Clear basket lid.
6
Quick connect socket unions.
7
Hydraulically efficient impeller and diffuser design.
Strong, single piece glass filled thermoplastic
pump body.
High grade stainless steel mechanical seal with 316
stainless steel spring assembly.
8
High performance motor:
9
• IP55 rating.
Drain plugs.
Extra large strainer basket – captures debris and
protects the impeller.
• Motor shaft 431 grade stainless steel.
• Fan cooled.
• Thermal overload protection.
5
4
Stable support base.
10
Motor protection bracket protects the motor from a
leaking mechanical seal.
Available Models
• 0.33 hp
• 0.50 hp
• 0.75 hp
The Aquamite
The Aquamite pump is an ideal pump for swimming pools and small recirculation systems including ponds and small
water features.
Dimensions (mm)
Flow Curves
Total length
16
250
278
192
Head (m)
14
12
Key
10
Aquamite 33
Aquamite 50
8
Aquamite 75
6
Aquamite 100
4
Aquamite 125
2
0
0
5
10
20
15
25
Flow Rate (m³/hr)
285
Technical Specifications
Model
Flow Rate @ 8 m
hp
kW
Amps
Phase
Volts
Cycle
RPM
Total Length
Aquamite 033
4.30 m³/hr
0.33
0.25
2.30
Single
220-240
50
2860
497 mm
Aquamite 050
6.60 m³/hr
0.50
0.38
2.50
Single
220-240
50
2860
497 mm
Aquamite 075
9.30 m³/hr
0.75
0.56
3.00
Single
220-240
50
2860
497 mm
5
Waterco Pumps
Available Models
• 0.50 hp
• 0.75 hp
• 1.00 hp
• 1.50 hp
The Supastream
Supastream pumps are general purpose units designed for use in swimming pools and low pressure water re-circulation
applications including aquaculture, ponds and irrigation.
Dimensions (mm)
Flow Curves
16
Total length
14
Head (m)
324
282
308
Key
10
Supastream 050
8
Supastream 075
Supastream 100
6
Supastream 125
4
159
217
12
Supastream 150
2
0
0
5
10
15
20
25
30
Flow Rate (m³/hr)
Technical Specifications
Model
6
Flow Rate @ 8 m
hp
kW
Amps
Supastream 050
7.50 m³/hr
Supastream 075
11.40 m³/hr
0.50
0.38
2.50
0.75
0.56
2.80
Supastream 100
15.18 m³/hr
1.00
0.75
Supastream 150
20.10 m³/hr
1.50
1.12
Phase
Volts
Cycle
RPM
Total Length
Single/Three 220-240/380-415
50
2860
524 mm
Single/Three 220-240/380-415
50
2860
536 mm
3.60
Single/Three 220-240/380-415
50
2860
559 mm
4.90
Single/Three 220-240/380-415
50
2860
580 mm
Available Models
• 1.50 hp
• 2.00 hp
• 2.50 hp
• 3.00 hp
The Hydrotuf
Hydrotuf is ideal for large domestic swimming pools with ancillary systems such as heating, in-floor cleaning, vacuum
cleaning, fountains and swim jets.
Dimensions (mm)
341
451
20
Total length
Total Head (m)
175.5
Flow Curves
345.6
Key
15
Hydrotuf 075
Hydrotuf 100
10
Hydrotuf 125
Hydrotuf 150
5
Hydrotuf 200
227.6
Hydrotuf 250
0
Hydrotuf 300
0
5
10
15
20
25
30
35
40
Flow Rate (m³/hr)
Technical Specifications
Model
Flow Rate @ 8 m
hp
kW
Amps
Hydrotuf 150
20.7 m³/hr
1.50
1.12
4.7
Phase
Volts
Single/Three 220-240/380-415
Cycle
RPM
Total Length
50
2860/2660
608 mm
Hydrotuf 200
25.1 m³/hr
2.00
1.50
6.8
Single/Three 220-240/380-415
50
2860/2660
629 mm
Hydrotuf 250
26.2 m³/hr
2.50
1.90
8.5
Single/Three 220-240/380-415
50
2860/2660
653 mm
Hydrotuf 300
30.8 m³/hr
3.00
2.20
9.7
Single/Three 220-240/380-415
50
2860/2660
670 mm
7
Waterco Pumps
Available Models
• 4.00 hp
• 5.00 hp
• 6.00 hp
• 7.00 hp
The Hydrostar
Redesigned to provide a substantially quieter operation with even higher flow rates, the Hydrostar MKIII has a higher head
than the previous Hydrostar models. Waterco has improved the hydraulic efficiency of the pump with the introduction of an
internal volute. The volute’s hydraulic design provides a natural balanced water flow and reduces hydraulic turbulence.
Dimensions (mm)
Flow Curves
25
834
427
393
Head (m)
20
Key
15
Hydrostar 400
Hydrostar 500
10
Hydrostar 600
262
Hydrostar 700
5
0
0
529
10
20
30
40
50
60
70
80
90
Flow Rate (m³/hr)
Technical Specifications
Model
8
Flow Rate @ 10 m
hp
kW
Amps
Phase
Volts
Cycle
RPM
Total Length
Hydrostar 400
47.00 m³/hr
4.00
3.2
5.2
Three
380-420
50
2900
834 mm
Hydrostar 500
53.00 m³/hr
5.00
3.8
5.8
Three
380-420
50
2900
834 mm
Hydrostar 600
65.00 m³/hr
6.00
4.4
7.0
Three
380-420
50
2900
834 mm
Hydrostar 700
70.00 m³/hr
7.00
5.2
8.2
Three
380-420
50
2900
834 mm
Available Models
• 2.00 hp
• 2.50 hp
• 3.00 hp
• 4.00 hp
The TurboFlo
TurboFlo is a hydraulically efficient, high performance pump designed for pools and spas with high power requirements. It
has an adjustable wet end which can be configured to suit up to 5 different plumbing conditions.
Dimensions (mm)
Flow Curves
Total length
25
241 80 frame
Key
20
Head (m)
TurboFlo 100
309
TurboFlo 125
15
TurboFlo 150
TurboFlo 200
10
TurboFlo 250
133
TurboFlo 300
5
TurboFlo 400
0
42.9
170.5
0
5
10
15
20
25
30
35
40
45
50
Flow Rate (m³/hr)
213.7
Technical Specifications
Model
Flow Rate @ 8 m
TurboFlo 200
24.5 m³/hr
TurboFlo 250
34.0 m³/hr
TurboFlo 300
37.0 m³/hr
TurboFlo 400
48.0 m³/hr
hp
kW
Amps
Phase
Volts
Cycle
RPM
Total Length
2.00
1.51
6.4
Single/Three
220-240/380-415
50
2860/2660
445 mm
2.50
1.70
7.2
Single/Three
220-240/380-415
50
2860/2660
445 mm
3.00
2.11
9.1
Single/Three
220-240/380-415
50
2860/2660
483 mm
4.00
3.10
5.7
Single/Three
220-240/380-415
50
2860/2660
508 mm
9
Waterco Pumps
Models Available
• 5.40 hp
• 7.40 hp
• 10.00 hp
• 13.00 hp
• 14.70 hp
The Hydro 5000
The Hydro 5000 pump is a high performance, self-priming cast iron pump, designed for large commercial swimming pools,
aquatic facilities and water parks. The Hydro 5000 features a hydraulically efficient bronze impeller which allows for quiet
operation and excellent flow plus an 18 litre capacity strainer.
Dimensions (mm)
Flow Rate
419
L
D
510
A
E
35
171
30
C
216 267
Key
Head (m)
25
B
697
521
406
Hydro 5000 4.0
20
Hydro 5000 5.5
Hydro 5000 7.5
15
Hydro 5000 9.5
10
Hydro 5000 11.0
416
159
295
B
89
Model
A
5
0
493
B
0
D
E
F
L
Hydro 5000 4.0
260
180
112
95
140
1060
Hydro 5000 5.5 & 7.5
298
200
132
108
140
1162
Hydro 5000 9.5 & 11.0
325
220
160
127
210
1236
20
40
60
80
100
120
140
160
Flow Rate (m³/hr)
Technical Specifications
10
Model
Flow Rate @ 10 m
hp
kW
Amps
Phase
Volts
Cycle
RPM
Total Length
Hydro 5000 4.0
60.00 m³/hr
5.4
4.0
6.8
Three
380-420
50
2950
1060 mm
Hydro 5000 5.5
80.00 m³/hr
7.4
5.5
9.2
Three
380-420
50
2950
1124 mm
Hydro 5000 7.5
108.00 m³/hr
10.0
7.5
13.2
Three
380-420
50
2950
1162 mm
Hydro 5000 9.5
120.00 m³/hr
13
9.5
19.4
Three
380-420
50
2950
1221 mm
Hydro 5000 11.0
132.00 m³/hr
14.7
11.0
21.5
Three
380-420
50
2950
1236 mm
2
7
5
1
6
9
8
10
3
4
1
Heavy duty IP55 weather proofed motor with
5
stainless steel shaft.
6
2
3
4" flanged discharge port.
7
Clear polycarbonate strainer lid enables an
instant view of the moulded polypropylene
8
strainer basket.
9
4
New lock ring with easy grip handles - no tools
Glass filled polypropylene composite wet end.
6" flanged suction port.
Rugged cast iron construction.
Drain plug.
Enclosed bronze impeller and bronze wear rings for
long lasting reliability.
required for simple removal and replacement of the
lid.
10
Integral support base for ease of mounting.
11
Revised: 16.10.2014
Distributed in the UK by Golden Coast Ltd | Phone: 01271 378100 | Web: www.goldenc.co