1. No category

CATALOG2014
CATALOG MAK CMC 2014 - Page 2
ACTIVITIES OF MAKCMC COMPANY
DRINKING AND
TECHNOLOGICAL
WATER TREATMENT
WATER
TREATMENT
FOR ENERGETICS
coagulation, flocculation,
sedimentation, filtration,
iron and manganese removal,
adsorption, ion exchange,
ultrafiltration (UF),
reverse osmosis (RO),
electrodeionization
(EDI)
heating and
cooling systems,
steam
generators
WASTE WATER
TREATMENT
PRODUCTION
ASSEMBLY
physical
and chemical
treatment
SERVICE
DESIGN
WATER
DISINFECTION
UV,
chlorine,
chlorine dioxide,
ozone
SANITARY
WATER
TREATMENT
microfiltration,
blended soft water,
hardness
stabilization
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
ACTIVITIES ENG
CATALOG MAK CMC 2014 - Page 3
PRODUCTS
DOSING
DOSING SYSTEMS TYPE: DOS
PROPORTIONAL DOSING SYSTEMS TYPE: PRODOS
BATCH DOSATOR TYPE MINDOS 5L
POLYETHYLENE TANKS AND EQUIPMENT FOR STORING LIQUIDS
AND POWDER SUBSTANCES
MIXING, COAGULATION, FLOCCULATION, SEDIMENTATION
STATIC MIXERS STATIFLO
LamelLA SETTLERS TYPE SEDIPAK
FILTRATON, ULTRAFILTRATION
WATER CARTRIDGE FILTERS TYPE SFS
WATER CARTRIDGE FILTERS TYPE PATFIL
AUTOMATIC WATER FILTERS TYPE: INIF
UFLEKS-DIP COMPACT ULTRAFILTRATION PLANTS FOR WATER
ACCORDING TO THE DOWTM INTEGRAPACKTM SYSTEM
SOFTENING
CARTRIDGE IONIC WATER SOFTENERS TYPE MINMEH
AUTOMATIC IONIC WATER SOFTENERS TYPE SANOM
AUTOMATIC IONIC WATER SOFTENERS TYPE MINOM
AUTOMATIC IONIC WATER SOFTENERS TYPE INOM
ION EXCHANGE, OTHERS
CARTRIDGE IONIC EXCHANGERS FOR WATER DEMINERALISATION TYPE MINDEM
AUTOMATIC ION EXCHANGERS FOR WATER DEMINERALIZATION TYPE MIDEM
MEMBRANE SYSTEMS (UF, RO, EDI)
REVERSE OSMOSIS PLANTS TYPE MINIRO AND INIRO
ELECTRODEIONIZATION PLANTS TYPE EDION
MEASUREMENTS & CONTROL
COOLING WATER BLOW DOWN CONTROL UNITS TYPE DESAL
UV DISINFECTION
UV DISINFECTION - UV SYSTEMS
CATALOG MAK CMC 2014 - Page 4
APPLICATIONS
WATER FILTRATION WITH GRANULAR MEDIA
DISINFECTION AND OXIDATION IN WATER TECHNOLOGY
CHLORINE DIOXIDE SOLUTION (Biostream® ZERO system)
PREPARATION AND DOSING PLANTS
SANITARY HOT WATER TREATMENT
PHYSICO-CHEMICAL AND MICROBIOLOGICAL CONDITIONS
SANITARY HOT WATER TREATMENT
PROCESS WATER TREATMENT IN ENERGETICS
ACCOMPANYING EQUIPMENT IN WATER TREATMENT IN ENERGETICS
WATER TREATMENT IN HEATING SYSTEMS
RESIDENTAL WATER TREATMENT
WATER TREATMENT FOR AIR HUMIDIFICATION IN HVAC SYSTEMS
CATALOG MAK CMC 2014 - Page 5
PRODUCTS
CATALOG MAK CMC 2014 - Page 6
PRODUCTS
DOSING
DOSING SYSTEMS TYPE: DOS
PROPORTIONAL DOSING SYSTEMS TYPE: PRODOS
BATCH DOSATOR TYPE MINDOS 5L
POLYETHYLENE TANKS AND EQUIPMENT FOR STORING LIQUIDS
AND POWDER SUBSTANCES
CATALOG MAK CMC 2014 - Page 7
PROPORTIONAL DOSING SYSTEMS TYPE: PRODOS
DOSING SYSTEMS TYPE: DOS
PRODOS and DOS dosing systems are designed for dosing liquid disinfection and chemical agents
for water conditioning in power plants, cooling systems, air conditioning and also for hot sanitary
water. PRODOS systems are designed for proportional dosing activated by a no voltage contact
from an impulse water meter.
PRODOS
TECHNICAL DATA
UNIT
PRODOS 1
PRODOS 2
PRODOS 3
PRODOS 5
PRODOS 6
PRODOS 7
Nominal flow rate
m3/h
1.5
2.5
6
PRODOS 3+ PRODOS +3+ PRODOS 4
7
9
10
15
25
40
Max. flow rate
m3/h
3
5
10
10
10
20
30
50
60
Dosing capactiy
ml/m3
10-110(1)
10-110(1)
10-110(1)
10-110(1)
10-110(1)
11-220(2)
11-183(2)
11-110(2)
11-91(2)
Dosing capacity, version D ml/m3
4-733(3)
4-440(3)
4-220(3)
4-220(3)
4-220(3)
4-88(3)
4-73(3)
11-99(4)
11-81(4)
Water meter
DN
15
20
25
32
40
40
50
65
80
Max. operating pressure (1)(2)
bar
16
16
16
16
16
10
10
10
10
Max. operating pressure (3)(4)
bar
10
10
10
10
10
10
10
10
10
L
mm
185
215
375
380
440
440
390
300
350
DOS
TECHNICAL DATA
UNIT
DOS 1
DOS 2
DOS 3
DOS D1
DOS D2
Dosing capactiy
l/h
1
4
8
2.2
4.9
Operating pressure
bar
16
7
3
10
10
Version D is used for gas containing liquid, quickly crystallizing liquid, very concentrated liquid or for dosing a very small
amount of liquid.
Electrical data: max. 20 W / 220 V / 50 Hz / IP65
L
DOSING POINT ''A''
6x4 mm
hmaks < 1,5 m
1 IMPULSE WATER METER
2 DOSING VALVE
3 CONTROL CABLE
4 DOSING PUMP
5 SUCTION LINE WITH LEVEL SWITCH
6 DOSING VESSEL
a) CONTAINER 1000 L (1000×1160×1200 mm)
b) BARREL 200 L (D560×970 mm)
c) VESSEL 100 L (D460×705 mm)
d) HOLDER 60 KG (360×670×290 mm)
e) HOLDER 25 KG (320×470×290 mm)
PRODOS standard component parts are: impulse water meter, dosing pump, control cable,
suction line with level switch and dosing valve.
DOS standard component parts are: dosing pump, suction line with level switch and dosing valve.
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
PRODOS/DOS ENG 1/1
CATALOG MAK CMC 2014 - Page 8
BATCH DOSATOR TYPE MINDOS 5L
The batch dosator type MINDOS 5L is intended for batch dosing of chemicals into smaller
heating systems.
It operates on the principle of displacement with the help of inlet (soft) water with higher
pressure or by creating an adequate pressure difference between the inlet and outlet
connection with the help of a throttling valve.
Mindos 5L is produced from surface protected sheet steel, inlet and outlet connection of 1/2''
and filling opening of 2''.
V=5l
DN 50
350 mm
DN 15
5
DN 1
150 mm
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
MINDOS ENG 1/1
CATALOG MAK CMC 2014 - Page 9
POLYETHYLENE TANKS AND EQUIPMENT FOR
STORING LIQUIDS AND POWDER SUBSTANCES
The product line of the company ASTRO is represented by polyethylene tanks made according to
the technology of rotational moulding which is most often used in the food-processing, chemical,
pharmaceutical, cosmetic, and textile industry, with the production of industrial paints, drinking
water treatment, and on treatment plants of municipal, industrial and waste water from landfills.
ASTRO vessels are designed and entirely produced in the manufacturer’s plant, including
metal load-bearing elements (frames, supports, carts) and connections to vessels which are
custom -made according to user’s needs.
All vessels are designed and produced as monoblock, meaning that the products are moulded
in one piece without welds which enables a higher reliability and durability.
SOLUTIONS:
CYLINDRIC
VESSELS TYPE CVC
from 60 to 30500
liters
VESSELS WITH
PRE-ASSEMBLY
FOR DOSING
PUMPS, MIXERS,
TYPE DS from 60 to
1600 liters
VESSELS ON
TRANSPORT
CARTS
FRAMES WITH
PRE-ASSEMBLY
FOR MIXERS,
PUMPS, ETC.
VESSELS AND
SILOS WITH LOADBEARING FRAMES
VESSEL IN A
VESSEL TYPE CVC
and CTB from 60 to
21000 liters
VESSELS WITH IBC
FRAMES
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
ASTRO ENG 1/2
CATALOG MAK CMC 2014 - Page 10
POLYETHYLENE TANKS AND EQUIPMENT FOR
STORING LIQUIDS AND POWDER SUBSTANCES
SOLUTIONS:
CONNECTORS TO VESSELS
OPEN VESSELS
WITH PREASSEMBLY FOR
MIXERS, PUMPS, ETC.
VESSELS WITH
LEVEL
INDICATORS
COLLECTING AND
SAFETY VESSELS
VESSELS IN BLACK
POLYETHYLENE,
INSULATED FROM
LIGHT
VESSELS WITH
SAFETY
GRADIENTS
type VRL 7 - LT. 650
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
ASTRO ENG 2/2
CATALOG MAK CMC 2014 - Page 11
PRODUCTS
MIXING, COAGULATION, FLOCCULATION, SEDIMENTATION
STATIC MIXERS STATIFLO
LamelLA SETTLERS TYPE SEDIPAK
CATALOG MAK CMC 2014 - Page 12
STATIC MIXERS - STATIFLO
STATIFLO is the world’s leader for the development and application of static mixing technology for
the water industry. The extensive product range includes pipeline mixers, channel mixers, gas
dispersion systems. Static mixers may be used for numerous applications for the blending, mixing
and dispersions of liquids and gases. The level of mixing can be selected by varying the style, number
and size of mixing elements. The only necessary feature is that the products to be processed can be
pumped through the mixer. Viscosities ranging from 0.01 cP up to 11.106 cP can be accommodated.
Sizes range from as small as 5 mm to 3000 mm diameter, in all commercially available materials of
construction and to all International standards and levels of Quality Assurance.
Principal benefits:
no moving parts
no direct energy input
no maintenance
no spare parts
low installation cost
low purchase price
low operating cost
rapid backback
Applications: Static mixers are typically used for the following applications within the water industry;
dosing of chemicals
ph control
coagulation
chlorination
iron / manganese removal
air / ozone / gas dispersion
p removal
sludge conditioning
blending process streams.
For additional info please visit: www.statiflo.com
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
STATIFLO ENG 1/2
CATALOG MAK CMC 2014 - Page 13
STATIC MIXERS - STATIFLO
‘S’ - TYPE STATIC MIXERS
Static mixers type ‘S’ have standard mixing elements
(three or four) and one dosing boss R1˝.
Materials: uPVC and stainless steel.
S_TYPE_uPVC
DIAMETER
[mm]
T [°C]
[bar]
3*
A [mm]
B [mm]
4*
weight [kg]
A [mm]
B [mm]
weight [kg]
25
40
10
240
70
1.5
285
70
50
40
10
380
100
5
160
100
1.75
5.5
65
40
10
480
100
5
560
100
5.5
80
40
10
500
100
7
100
40
10
600
100
9
[*] number of elements
S_TYPE_316_SS
DIAMETER
[mm]
T [°C]
[bar]
3*
A [mm]
B [mm]
4*
weight [kg]
A [mm]
B [mm]
weight [kg]
25
100
10
210
40
2.7
248
40
50
100
10
445
105
7
520
105
2.9
7.5
65
100
10
480
90
9
550
90
9.5
80
100
10
500
90
11
100
100
10
615
90
14
[*] number of elements
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
STATIFLO ENG 2/2
CATALOG MAK CMC 2014 - Page 14
PRODUCTS
FILTRATION, ULTRAFILTRATION
WATER CARTRIDGE FILTERS TYPE SFS
WATER CARTRIDGE FILTERS TYPE PATFIL
AUTOMATIC WATER FILTERS TYPE: INIF
UFLEKS-DIP COMPACT ULTRAFILTRATION PLANTS FOR WATER
ACCORDING TO THE DOWTM INTEGRAPACKTM SYSTEM
CATALOG MAK CMC 2014 - Page 15
WATER CARTRIDGE FILTERS
TYPE SFS
Cartridge filters type SFS are used for filtration of water and other liquids with nominal flow
up to 3,2 m3/h. They consist of plastic housing with air valve and polypropylene filter
cartridge. Two sizes of housings, two hydraulic connection sizes and three basic filtration
degree filter cartridges are available. For water temperatures up to 80 °C, model H
is available in AISI 304 stainless steel housing.
HOUSING WITH FILTER CARTRIDGE
FILTER CARTRIDGE
TECHNICAL DATA
SIZE
connection
max.
max.
housing dimension
pressure
temperature
[diameter x length]
[’’]
[DN]
[bar]
[°C]
[mm]
3/
SFS2-20
20
7
do 45
132 x 315
4
SFS2-25
25
1
7
do 45
132 x 315
3/
8
do 35
135 x 570
SFS3
20
4
3/
16
do 80
200 x 375
SFS2-20H
20
4
SFS2-25H
25
1
16
do 80
200 x 375
SFS3-H
25
1
16
do 80
200 x 630
* option: filter cartridges with filtration degree 20 µm, 50 µm and 100 µm
** option: filter cartridges with filtration degree 20 µm, 50 µm
FILTER CARTRIDGES
filtration degree
size
[m]
[’’]
[µm]
254
10
1
254
10
5
254
10
10
508
20
1
508
20
5
508
20
10
filter cartridge
length
[’’]
[µm]
254
10
254
10
508
20
254
10
254
10
508
20
filtration
degree
[µm]
1 / 5 / 10 *
1 / 5 / 10 *
1 / 5 / 10 *
5 / 10 **
5 / 10 **
5 / 10 **
max. recommended
flow [m3/h]
0,75
1,0
1,0
1,5
2,0
2,0
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
SFS / PATFIL ENG 1/2
CATALOG MAK CMC 2014 - Page 16
WATER CARTRIDGE FILTERS
TYPE PATFIL
Cartridge filters type PATFIL are used for filtration of water and other liquids with nominal
flow up to 60 m3/h. They consist of AISI 316L stainless steel housing and polypropylene
filter cartridges. The housing consists of hydraulic connections, air valve, connections for
pressure gauges and filter drain and height adjustable support legs. Six sizes are available
with filtration degree 1 µm, 5 µm, 10 µm and 20 µm.
CARTRIDGE FILTER TYPE PATFIL
TECHNICAL DATA
max. temperature:
max. Operating pressure:
SIZE
PATFIL 1
PATFIL 2
PATFIL 3
PATFIL 4
PATFIL 5
PATFIL 6
90 °C
10 bar
A [mm]
B [mm]
connection
168
219
250
300
300
300
1554
1808
1808
1808
1808
1808
DN40 (11/2'')
DN50 (2'')
DN50 (2'')
DN65 (21/2'')
DN80 (3'')
DN100 (4'')
max.
flow [m3/h]
9
20
28
40
48
60
filter cartridge
number
3
5
7
10
12
15
filter cartridge
size [’’]
30''
40''
40''
40''
40''
40''
weight
[kg]
28,5
35,6
40,2
43,2
43,3
48,2
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
SFS / PATFIL ENG 2/2
CATALOG MAK CMC 2014 - Page 17
AUTOMATIC WATER FILTERS TYPE: INIF
INIF water filters are designed for filtration, iron and manganese removal and adsorption of
polutants from drinking or process water with flow up to 25 m3/hour. In accordance with
application there are four different versions available with nine flow capacity size each.
VERSION
FILTER MEDIA
PARTICLE SIZE
RANGE (mm)
APPLICATION
MAX. (SPECIFIC)
FLOW RATE (m/h)
BACKWASH (SPECIFIC)
FLOW RATE (m/h)
INIF K
quartz sand
1-2
filtration
20
35
anthracite
0.6 - 1.6
coagulation filtration
quartz sand
filtration
30
25
0.4 - 0.8
INIF A
activated carbon
0.6 - 2.4
adsorption, dechlorination
20
35
INIF D
zeolite
0.25 - 1.0
iron/manganese removal
20
35
INIF H
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
INIF ENG 1/2
CATALOG MAK CMC 2014 - Page 18
AUTOMATIC WATER FILTERS TYPE: INIF
TECHNICAL DATA
INIF 2
INIF 3
INIF 4
INIF 5
INIF 6
INIF 7
INIF 8
INIF 9
257
334
369
553
610
770
927
1074
1226
Vf = 10
0.45
0.8
1.0
2.02
2.7
4.5
6.5
8.5
11.5
Vf = 20
0.90
1.6
2
4.4
5.4
9
13
17
23
Vf = 30
1.40
2.4
3
6.6
8.1
13.5
19.5
25.5
34.5
0.045
0.08
0.10
0.22
0.27
0.45
0.65
0.85
1.15
FILTER DIAMETER (mm)
CAPACITY
(m3/h)
FILTER
INIF 1
FILTER CROSS SECTION (m2)
OPERATING PRESSURE (bar)
up to 8
up to 6
OPERATING TEMPERATURE (oC)
up to 40
MAX. BACKWASH
FLOW RATE (m3/h)
1.6
2.8
3.5
7.7
9.5
16
23
30
40
CONNECTIONS DN (mm)
25
25
25
32
32
40
50
50
65/50
MULTIWAY VALVE TYPE
710
710
710
715
715
350
363
363
363
Vf = specific filtration flow rate (m/h)
WATER FLOW DIRECTION IN DIFFERENT PHASES OF OPERATION
SERVICE
BACKWASH
inlet
FIRST FILTRATE (TO DRAIN)
inlet
inlet
outlet
drain
drain
INIF STANDARD COMPONENT PARTS
- pressure vessel made of glass reinforced polyethylene
- filter media in accordance with application
- multiway hydraulic valve
- controller
- distributor
- two pressure gauges
- inlet and outlet water sampling valve
FILTER
DIMENSIONS (mm)
LENGTH
FILTER
INIF 1
INIF 2
INIF 3
INIF 4
INIF 5
INIF 6
INIF 7
INIF 8
INIF 9
400
500
680
780
780
1100
1100
1100
1100
WIDTH
450
550
570
730
800
1300
1620
1780
1780
HEIGHT
1300
1565
1670
1950
2200
2350
2500
2900
2900
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
INIF ENG 2/2
CATALOG MAK CMC 2014 - Page 19
UFLEKS-DIP COMPACT ULTRAFILTRATION
PLANTS FOR WATER ACCORDING TO THE
DOWTM INTEGRAPACKTM SYSTEM
Ultrafiltration (UF) is a membrane process where suspended particles are physically separated from water.
The size of separated particles is set with by the size of membrane pores; by ultrafiltration this is 0.01-0.1 µm. UF
removes suspended and colloidal particles, which cause water turbidity, oxidized Fe, Mn, pathogenic microorganisms
(parasites, bacteria, and viruses), and high-molecular fractions of organic substances.
Ultrafiltration membranes completely permeate dissolved salts and low-molecular organic substances which cause
color and taste as well as un-oxidized Fe and Mn in the water.
RECOV
ERY
WAS
TE
WAT
ER
INL
INL
AIR
ET
ET
The basic UFLEKS unit is a vertical module with hollow membrane fibers and the following characteristics:
Length of membrane fibers:
1500/2000 mm
Fiber diameter:
0.7 x 1.3 mm
Flow-through characteristics:
''out/in, dead end''
Material:
H-PVDF
Nominal pore size:
0.03 µm
Specific permeate flow
50-115 l/m2/h
100-150 l/m2/h
Specific flow of water for backwash:
Water temperature:
1- 40 °C
Admissible TMP:
2.1 bar
pH operation/cleaning
2-11/2-12
NaOCl max.:
2.000 ppm
Admissible inlet water quality:
100 mg/l TSS, particles up to 300µ
Expected recovery permeate quality:
turbidity < 0.1NTU, reduction of the no. of microorganisms > 99.99%
Module dimensions:
1,820/2,320 x 225 mm
Module filter surface:
51/77 m²
Inlet pressure max.:
6 bar
Backwash pressure max.:
2.5 bar
Material used for module housing:
U-PVC
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
ULTRAFILTRATION ENG 1/2
CATALOG MAK CMC 2014 - Page 20
UFLEKS-DIP COMPACT ULTRAFILTRATION
PLANTS FOR WATER ACCORDING TO THE
DOWTM INTEGRAPACKTM SYSTEM
SIZE
1
1+
2
3
4
5
6
7
8
9
10
11
TYPE
DIP_51_01
DIP_77_01
DIP_51_02
DIP_51_04
DIP_51_06
DIP_51_08
DIP_77_06
DIP_51_10
DIP_77_08
DIP_51_12
DIP_51_14
DIP_77_10
FILTER
SURFACE
[m 2 ]
51
77
102
204
306
408
462
510
616
612
714
770
CAPACITY
QF nom [m 3 /h]
3,3
5
6,6
13,3
20
26,5
30,0
33
40,0
40
46,4
50
CAPACITY
QF max [m 3 /h]
5,1
7,7
10,2
20,4
30,6
40,8
46,2
51
61,6
61,2
71,4
77
DN
[in/out]
40
40
40
50 (65)
65 (80)
80
80
100
100
100
100
100 (125)
DIMENSIONS [mm]
[W x H x D]
.
.
.
.
.
.
.
.
.
.
.
.
Standard auxiliary equipment:
Equipment at water inlet (protective filter, pressure control valve, backflow preventer, protective pressure switch)
Connections for raw water inlet, permeat outlet, low-pressure air and water for backwash,
and membrane cleaning, outlet of waste water
Pneumatically operated shut off valves PN10
PVC PN10 fittings and stainless steel frame/skid.
Connections for periodic integrity tests
Measuring sensors (flow, pressure, level) necessary for functional and safe plant operation
Variable speed backwash pump (one or two)
Equipment for CEB and CIP process
Pneumatic block for actuated valves control
Micro processor control panel with the option of CPU or SCADA connection
Internal electric and pneumatic installation
Optional equipment:
Permeate tank with equipment
Waste water treatment system
System for automated integrity test
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
ULTRAFILTRATION ENG 2/2
CATALOG MAK CMC 2014 - Page 21
PRODUCTS
SOFTENING
CARTRIDGE IONIC WATER SOFTENERS TYPE MINMEH
AUTOMATIC IONIC WATER SOFTENERS TYPE SANOM
AUTOMATIC IONIC WATER SOFTENERS TYPE MINOM
AUTOMATIC IONIC WATER SOFTENERS TYPE INOM
CATALOG MAK CMC 2014 - Page 22
CARTRIDGE IONIC WATER SOFTENERS
TYPE MINMEH
Cartridge ionic water softeners type MINMEH are used when soft water consumption is low.
Water softening, Ca and Mg ion exchange, is taking place when water flows through layers of
ion exchange resin.
Once ion exchange resin is exhausted, cartridge needs to be replaced with new one.
Exhausted cartridge is returned to the supplier for regeneration.
TECHNICAL DATA
UNIT
MINMEH 1
MINMEH 2
MINMEH 3
MINMEH 4
Ion exchange resin volume
l
10
18
30
45
Pressure vessel volume
l
11
21,4
38
50
Capacity (1) (2)
l
2200
4000
6700
10000
l/h
500
900
1500
2300
232 x 1074
257 x 1126
Flow
Connections (DN) inlet/outlet
mm
20
Working pressure
bar
up to 10
Working temperature
Dimensions a x b
0
C
mm
up to 40
206 x 432
206 x 762
Remarks:
(1)
(2)
1 mol = 5,6 m3 x 0dH
Orientation value at inlet water hardness 2,7 mol/m3 (15 0dH)
Option: water meter
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
MINMEH ENG 1/1
CATALOG MAK CMC 2014 - Page 23
AUTOMATIC IONIC WATER SOFTENERS
TYPE SANOM
SANOM softeners are designed to efficiently remove Ca and Mg ions from water with flow up
to 1,75 m3/h. Softening is performed when water flows through ion exchange resin bed inside
a pressure vessel. When ion exchange resin gets exhausted, regeneration with brine
(saturated NaCl solution) is needed to reactivate the resin.
UNIT
SANOM 1
SANOM 2
SANOM 3
SANOM 4
Ion exchange resin volume
TECHNICAL DATA
l
4
9
20
25
35
Pressure vessel volume
l
6
11
39
39
39
mol/reg
2,2
5
11,0 - 12,5
13,8 - 15,6
19,3 - 21,9
kg/reg
1
2,2
3 - 4,8
3,8 - 6
5,3 - 8,4
m3/h
0,02 - 0,2
0,04 - 0,4
0,1 - 1,0
0,12 - 1,25
0,17 - 1,75
Capacity [1] [2] [3]
NaCl consumption [3]
Flow
Multiport valve type
SANOM 5
/
132
132
132
132
132
Hydraulic connections [DN] inlet/outlet
mm
15
15
15
15
20
Working pressure
bar
320 x 500 x 1140
320 x 500 x 1140
Working temperature
Dimensions
2,5 - 6
0
C
mm
up to 40
195 x 405 x 340
320 x 500 x 670 320 x 500 x 1140
NOTES:
(1) 1 mol = 5,6 m3 x 0dH = 100 ppm CaCO3
(2) INLET WATER QUALITY:
hardness up to 4 mol/m3, Na+ up to 100 mg/l
(3) ECONOMIC REGENERATION:
150 g NaCl/l ion exchange resin
OUTLET QUALITY :
0,02 mol/m3; 0,1 0dH =1,785 ppm CaCO3
NORMAL REGENERATION:
240 g NaCl/l ion exchange resin
OUTLET QUALITY :
0,01 mol/m3; 0,05 0dH =0,892 ppm CaCO3
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
SANOM ENG 1/2
CATALOG MAK CMC 2014 - Page 24
AUTOMATIC IONIC WATER SOFTENERS
TYPE SANOM
Single device system components (V,
STE):
• inlet 5µm cartridge filter
• reinforced polyethylene pressure
vessel with ion exchange resin in Na
form
• multiport valve with controller
• polyethylene brine tank with brine valve
for ion exchange resin regeneration
Operation and regeneration properties of single device systems:
Optional equipment:
-
-
model H: with hydraulic outlet valve
series SFE: SFE-T (with a timer) or
SFE-V (volumetric operated)
T
LE
IN
-
ET
TL
OU
model D: disinfection of ion exchange resin
during regeneration
-
series SCA: T-SCA (with a timer) or
V-SCA (volumetric operated)
TO THE SOFTENER
-
FROM BRINE TANK
model M:
with mixing valve for blended soft water
Ion exchange resin type:
-
S: standard
-
P: alimentary
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
SANOM ENG 2/2
CATALOG MAK CMC 2014 - Page 25
AUTOMATIC IONIC WATER SOFTENERS
TYPE MINOM
MINOM softeners are designed to efficiently remove Ca and Mg ions from water with flow up
to 17,5 m3/h. Softening is performed when water flows through ion exchange resin bed
inside a pressure vessel. When ion exchange resin gets exhausted, regeneration with brine
(saturated NaCl solution) is needed to reactivate the resin.
SINGLE PLANT
DOUBLE PLANT
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
MINOM ENG 1/4
CATALOG MAK CMC 2014 - Page 26
50
50
40
50
40
50
40
32
up to 40
2,5 - 6 (8,5)
C
0
Working temperature
bar
Working pressure
20
20
20
25
25
32
32
32
[4]
32
250
250
230
250
230
250
230
132
230
132 /DF 230 132 /DF
132 /DF
132 /DF
132 /DF
132 /DF
123 /DF
3 - 17,5
1,8 - 8,0 1,8 - 17,5
1,0 - 5,0 1,0 - 8,0 1,0 - 10,0 1,2 - 8,0 1,2 - 12,5
0,7 - 6,9
0,5 - 5,0 0,5 - 5,6 0,7 - 5,0
0,3 - 3,7
0,2 - 2,5
0,2 - 1,8
0,1 - 1,2
0,1 - 0,9
m3/h
20,6 - 33
16,9 - 27
11,3 - 18
7,5 - 12
5,6 - 9
3,75 - 6
300
200
200
100
100
100
100
75,7 - 85,9
61,9 - 70,3
13,8 - 15,6 20,7 - 23,4 27,5 - 31,3 41,3 - 46,9
9,9 - 11,2
140
105
63
50
32,2
21,4
112,5
75
50
37,5
25
18
2,7 - 4,3
kg/reg
mm
(4) MINOM 0 DF – 6 DF
Hydraulic connections
[DN] inlet/outlet
0,01 mol/m3; 0,05 0dH =1,785 ppm CaCO3
/
240 g NaCl/l ion exchange resin
OUTLET QUALITY :
Multiport valve type
0,02 mol/m3; 0,1 0dH =1,785 ppm CaCO3
NORMAL REGENERATION:
NaCl consumption [3]
150 g NaCl/l ion exchange resin
OUTLET QUALITY :
l
(3) ECONOMIC REGENERATION:
Brine tank volume
hardness up to 4 mol/m3, Na+ up to 100 mg/l
mol/reg
(2) INLET WATER QUALITY:
TECHNICAL DATA
(1) 1 mol = 5,6 m3 x 0dH = 100 ppm CaCO3
l
NOTES:
Pressure vessel volume
UNIT
TO DRAIN
l
COLUMN 2
Ion exchange resin volume
COLUMN 1
MINOM 0
MINOM 1 MINOM 2 MINOM 3 MINOM 4
MINOM 5
BATTERY LIMIT
Capacity [1] [2] [3]
170
BATTERY LIMIT
INLET
OUTLET
137,5
DOUBLE PLANT
MINOM 6
TO DRAIN
Flow
82,5 - 132
52,5 - 84
37,5 - 60
30 - 48
850
850
550
550
710
303 - 344
196 - 219
350
450
310
138 - 156
110 - 125
COLUMN 1
250
MINOM 7
MINOM 8
MINOM 9
BATTERY LIMIT
250
OUTLET
INLET
200
MINOM 10
SINGLE PLANT
550
AUTOMATIC IONIC WATER SOFTENERS
TYPE MINOM
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
MINOM ENG 2/4
CATALOG MAK CMC 2014 - Page 27
AUTOMATIC IONIC WATER SOFTENERS
TYPE MINOM
SINGLE PLANT
2
6
3
1
DOUBLE PLANT
4
6
2
1
3
5
4
10
220V / 50Hz
8
7
9
220V / 50Hz
H
H
h
h
d2
d1
d2
d1
B
B
L1
1
2
3
4
5
L2
PRESSURE VESSEL
BRINE TANK
INLET CARTRIDGE FILTER
CONTROLLER (SIATA OR FLECK)
MULTIPORT VALVE
6
7
8
9
10
BRINE VALVE
3-WAY HYDRAULIC OUTLET SWITCH-VALVE
BRINE DIRECTOR VALVE
IMPULSE WATER-METER
SAMPLING TAP
MINOM 0
MINOM 1
MINOM 2
MINOM 3
MINOM 4
MINOM 5
MINOM 6
H
mm
1100
1500
1500
1600
1750
2000
2000
MINOM 7 MINOM 8
2200
2000
MINOM 9 MINOM 10
2250
2470
h
mm
630
630
630
630
1000
1060
1060
1050
1050
1050
1090
B
mm
700
700
700
700
700
700
900
1100
1100
1300
1300
L1 mm
800
850
900
950
1000
1050
1300
1550
1650
2000
2000
3100
L2 mm
1500
1600
1700
1850
1900
1900
2200
2250
2350
2650
d1 mm
206
206
257
257
336
369
406
470
552
610
770
d2 mm
467
467
467
467
530
530
600
800
800
1000
1000
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
MINOM ENG 3/4
CATALOG MAK CMC 2014 - Page 28
AUTOMATIC IONIC WATER SOFTENERS
TYPE MINOM
SINGLE PLANTS
Single plant system components (V, STE):
•
•
•
•
inlet 5µm cartridge filter
reinforced polyethylene pressure vessel with ion exchange resin in Na form
multiport valve with controller
polyethylene brine tank with brine valve for ion exchange resin regeneration
Operation and regeneration properties of single plant systems:
-
series SFE:
SFE-T
(with a timer)
or
SFE-V
(volumetric operated)
-
series SCA:
T-SCA
(with a timer)
or
V-SCA
(volumetric operated)
DOUBLE PLANTS
Double plant system components (D, K):
• inlet 5µm cartridge filter
• 2 reinforced polyethylene pressure
vessels with ion exchange resin in Na form
• 2 multiport valves with controller and
impulse water-meter
• Brine director valve
• polyethylene brine tank with brine valve
for ion exchange resin regeneration
• 3-way hydraulic outlet switch-valve
D series
DF series
Operation and regeneration properties of double
plant systems:
-
D series: with volumetric microprocessor controller (SIATA)
DF series: with volumetric electro-mechanic controller (FLECK)
K series: with on-line hardness measurement
K series
Optional equipment:
-
model H: with
hydraulic outlet
valve
-
T
LE
IN
model D:
Disinfection of ion
exchange resin during
regeneration (up to MINOM 8)
-
model M:
with mixing valve for
blended soft water
ET
TL
OU
TO THE SOFTENER
FROM BRINE TANK
Ion exchange resin type:
-
S: standard
P: alimentary
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
MINOM ENG 4/4
CATALOG MAK CMC 2014 - Page 29
AUTOMATIC IONIC WATER SOFTENERS
TYPE INOM
INOM softeners are designed to efficiently remove Ca and Mg ions from water with flow up
to 30 m3/h. Softening is performed when water flows through ion exchange resin bed inside
a pressure vessel. When ion exchange resin gets exhausted, regeneration with brine
(saturated NaCl solution) is needed to reactivate the resin.
SINGLE PLANT
DOUBLE PLANT
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
INOM ENG 1/4
CATALOG MAK CMC 2014 - Page 30
AUTOMATIC IONIC WATER SOFTENERS
TYPE INOM
TECHNICAL DATA
UNIT
INOM 4
INOM 5
INOM 6
INOM 7
Ion exchange
resin volume
l
550
800
1050
1450
Pressure vessel
volume
l
710
1020
1360
1840
mol/reg
303 - 344
440 - 500
578 - 656
798 - 906
Capacity
[1] [2] [3]
l
850
1000
2000
2000
kg/reg
82,5 - 132
120 - 192
158 - 252
218 - 348
Flow
m3/h
3 - 27,5
4 - 30
5 - 30
7 - 30
Hydraulic connections
[DN] inlet/outlet [4]
mm
50/65
Working pressure
bar
2,5 - 6
0C
up to 40
Brine tank volume
NaCl consumption [3]
Working temperature
50/65/80
65/80
NOTES:
(1) 1 mol = 5,6 m3 x 0dH = 100 ppm CaCO3
[4]
(2) INLET WATER QUALITY:
hardness up to 4 mol/m3, Na+ up to 100 mg/l
FLOW (m /h)
(3) ECONOMIC REGENERATION:
150 g NaCl/l ion exchange resin
up to 8
240
40
25
OUTLET QUALITY :
0,02 mol/m3; 0,1 0dH =1,785 ppm CaCO3
up to 17,5
260
50
40
NORMAL REGENERATION:
240 g NaCl/l ion exchange resin
up to 27,5
360
65
50
OUTLET QUALITY :
0,01 mol/m3; 0,05 0dH =1,785 ppm CaCO3
over 27,5
360
80
65
SINGLE PLANT
VALVE TYPE HYDR. CONNEC. (DN) WATER METER (DN)
DOUBLE PLANT
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
INOM ENG 2/4
CATALOG MAK CMC 2014 - Page 31
AUTOMATIC IONIC WATER SOFTENERS
TYPE INOM
SINGLE PLANT
DOUBLE PLANT
1
2
3
4
5
6
7
8
9
10
PRESSURE VESSEL
BRINE TANK
INLET FILTER
CONTROLLER (SIATA)
MULTIPORT VALVE
BRINE VALVE
3-WAY HYDRAULIC OUTLET SWITCH-VALVE
BRINE DIRECTOR VALVE
IMPULSE WATER-METER
SAMPLING TAP
H
h
B
L1
L2
d1
d2
INOM 4
2470
1090
1200
1900
3100
770
1090
INOM 5
2250
1050
1400
2200
3600
927
1210
INOM 6
2500
1920
1800
2800
4000
1074
1310
INOM 7
2570
1920
1800
2800
4000
1226
1310
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
INOM ENG 3/4
CATALOG MAK CMC 2014 - Page 32
AUTOMATIC IONIC WATER SOFTENERS
TYPE INOM
SINGLE PLANTS
Single plant system components (V):
•
•
•
•
inlet filter
reinforced polyethylene pressure vessel with ion exchange resin in Na form
multiport valve with controller
polyethylene brine tank with brine valve for ion exchange resin regeneration
Operation and regeneration properties of single plant systems:
-
V-series: with volumetric microprocessor controller
DOUBLE PLANTS
Double plant system components (D, K):
• inlet cartridge filter
• 2 reinforced polyethylene pressure
vessels with ion exchange resin in Na form
• 2 multiport valves with controller and
impulse water-meter
• brine director valve
• polyethylene brine tank with brine valve
for ion exchange resin regeneration
• 3-way hydraulic outlet switch-valve
D series
Operation and regeneration properties of double
plant systems:
-
K series
D series: with volumetric microprocessor controller (SIATA)
K series: with on-line hardness measurement
Optional equipment:
-
model H: with
hydraulic outlet
valve
-
T
LE
IN
model M:
with mixing valve for blended soft water
T
LE
T
OU
Ion exchange resin type:
-
S: standard
P: alimentary
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
INOM ENG 4/4
CATALOG MAK CMC 2014 - Page 33
PRODUCTS
ION EXCHANGE, OTHERS
CARTRIDGE IONIC EXCHANGERS FOR WATER DEMINERALISATION TYPE MINDEM
AUTOMATIC ION EXCHANGERS FOR WATER DEMINERALIZATION TYPE MIDEM
CATALOG MAK CMC 2014 - Page 34
CARTRIDGE IONIC EXCHANGERS FOR WATER
DEMINERALISATION TYPE MINDEM
Cartridge ionic exchangers for water demineralisation type MINDEM are primarily used for
polishing of previously partially demineralised water and also when demineralised water
consumption is low.
Once ion exchange resin is exhausted, cartridge needs to be replaced with new one.
Exhausted cartridge is returned to the supplier for regeneration.
TECHNICAL DATA
UNIT
MINDEM 1
MINDEM 2
MINDEM 3
MINDEM 4
Ion exchange resin volume
l
10
18
30
45
Pressure vessel volume
l
11
21,4
38
50
Capacity (1) (2)
l
1200
2100
3600
5300
l/h
300
540
900
1350
232 x 1074
257 x 1126
Flow
Connections (DN) inlet/outlet
mm
20
Working pressure
bar
up to 10
Working temperature
Dimensions a x b
0
C
mm
up to 40
206 x 432
206 x 762
Remarks:
(1)
Orientation value at inlet water hardness 2,7 mol/m3 (15 0dH)
and outlet water conductivity up to 10 µS/cm.
Option:
- water meter
- conductivity meter (above)
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
MINDEM ENG 1/1
CATALOG MAK CMC 2014 - Page 35
AUTOMATIC ION EXCHANGERS FOR WATER
DEMINERALIZATION TYPE MIDEM
During water flow through cation
and anion ion exchanger cations
and anions from water are
exchanged with hydrogen and
hydroxyl ions bound to the cation
and anion ion exchangers. Water
gained this way practically does
not contain originally dissolved
substances; it is demineralized
and can as such be used for
different purposes.
Cation and anion exchanger are
exhausted sooner or later depending
on inlet water quality flow, and the
size of demineralization plant. The
demineralization plant disconnects
from working phase. This is followed
by the co-current regeneration of the
cation exchanger with HCl solution
and anion exchanger with NaOH
solution. All working and regeneration
phases are completely automatic.
Automatic ion exchangers type
MIDEM are intended for production
of demineralized water with
electro-conductivity up to 10 µS/cm
and at flows up to 6.2 m3/h. They
are available in six different sizes as
single or double plants. Demineralized water in double plants is
continuously available.
TECHNICAL DATA
UNIT
MIDEM 1
MIDEM 2
MIDEM 3
MIDEM 4
MIDEM 5
MIDEM 6
l
15/23
23/35
35/50
63/95
83/125
125/200
l
20/33
33/48
48/75
75/140
140/170
140/250
Volume of the ion exchanger
resin cation/anion
Volume of the pressure
vessel cation/ anion
Capacity (1)
mol/reg
15
23
33
63
83
m3/h
0,09-0,75
0,14-1,2
0,2-1,6
0,38-3,1
0,56-4,1
0,8-4,0
0,8-6,2
/
132
132
132
132
132
132
230
kg/reg
3,9
5,9
8,5
16,2
22,5
32,2
Consumption of 45% NaOH
kg/reg
3,8
5,8
8,3
15,8
22,4
33,3
Waste water
m3/reg
0,3
0,4
0,6
1,1
1,5
2,2
Inlet/outlet connection (DN)
mm
15
15
25/15
25
32/25
40/32
Operating pressure
bar
2,5 - 6
C
up to 40
Flow
Type of multiport valve
Consumption of 33% HCl
Operating temperature
0
125
Note: (1) Mole of single valent ions
DIM.
Length*
DEVICE
mm
Length** mm
Width
mm
Height
mm
Note: (*) Single plant (**) Double plant
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
MIDEM ENG 1/1
CATALOG MAK CMC 2014 - Page 36
PRODUCTS
MEMBRANE SYSTEMS (UF, RO, EDI)
REVERSE OSMOSIS PLANTS TYPE MINIRO AND INIRO
ELECTRODEIONIZATION PLANTS TYPE EDION
CATALOG MAK CMC 2014 - Page 37
REVERSE OSMOSIS PLANTS
TYPE MINIRO AND INIRO
Reverse osmosis separation technology is used to remove dissolved impurities from water by
using semi-permeable membrane. High pressure is used as the driving force for the separation.
Pure water is permitted to pass through the membrane creating a purified permeate stream
while ionic, organic and other contaminants are swept away in a concentrated solution. The
quality of permeate can be further improved afterwards by using proper ion exchange plant or
electrodeionisation (EDI) for polishing. MINIRO reverse osmosis plants are used for permeate
flow up to 240 L/h. For higher capacities, INIRO plants (with proper pretreatment) are used.
All the units are fully automatic with modular and simple plug and play design.
STANDARD PARTS:
- high pressure pump
- flow meters
- pressure gauges
- membrane element(s) in pressure vessel
- feed control valve
- pressure switch
- feed water cartridge filter (5µm)
- permeate conductivity measurement unit
- electrical cabinet
OPTIONAL EQUIPMENT:
- automatic water softener (water
pre-treatment)
- water dechlorination (water pre-treatment)
- permeate storage tank (after RO plant)
- booster pump (after permeate storage
tank)
- mixed bed ion exchange plant type MINDEM
(permeate polishing)
-electrodeionisation plant type EDION
GENERAL OPERATIONAL CONDITIONS:
INLET WATER PRESSURE:
min. 1,5 bar
OUTLET PERMEATE PRESSURE: max. 0,5 bar
5 – 30 OC
WORKING TEMPARATURE:
INLET WATER QUALITY:
DISSOLVED SOLIDS:
up to 2000 mg/l (as NaCl)
SDI INDEX:
up to 3
Fe, Mn, oxidants:
none
pH
3 – 11
NOTES (TABLE ‘TECHNICAL DATA’ ON PAGE 2)
[1], [2]
SALT REJECTION
version L: over 95 % [1]
version H: over 98 % [2]
[3]
230V / 50Hz
[4]
3 x 400V / 50Hz
[5]
WATER TEMPERATURE: 12 OC
DISSOLVED SOLIDS:
cca. 600 mg/l
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
MINIRO/INIRO ENG 1/2
CATALOG MAK CMC 2014 - Page 38
REVERSE OSMOSIS PLANTS
TYPE MINIRO AND INIRO
TECHNICAL DATA
MINIRO
MINIRO 8
PERMEATE QP [l/h]
RECOVERY [%]
FEED FLOW QF [l/h]
EL. POWER [kW] [3], [2]
80
50 - 70
160 - 115
0,55
MINIRO 16
160
50 - 70
320 - 230
0,55
MINIRO 25
250
50 - 70
480 - 360
0,55
PERMEATE QP [l/h]
RECOVERY [%]
FEED FLOW QF [l/h]
EL. POWER [kW] [4], [5]
L [1]
H [2]
INIRO 40
370
60
620
1,5
2,2
INIRO 50
500
72
700
1,5
2,2
INIRO
INIRO 75
INIRO 100
750
70
1070
1,5
2,2
1000
75
1340
1,5
2,2
INIRO 150
1500
75
2000
2,2
3,0
INIRO 200
2000
75
2670
3,0
4,0
INIRO 250
2500
75
3340
3,0
4,0
INIRO 300
3000
75
4000
4,0
7,5
INIRO 400
4000
75
5340
4,0
7,5
INIRO 500
5000
75
6670
4,0
7,5
INIRO 650
6500
75
8670
11,0
15,0
INIRO 800
7700
75
10670
11,0
22,0
10000
75
13340
15,0
22,0
INIRO 1000
*[1]-[5] – see notes on 1st page bottom right
INFORMATIVE DIMENSIONS
MINIRO
DIMENSIONS [mm]
length
height
CONNECTIONS [DN]
width
feed
concentrate
permeate
MINIRO 8
500
1500
500
15
15
15
MINIRO 16
500
1500
500
15
15
15
MINIRO 25
500
1800
500
15
15
15
height
width
feed
INIRO
DIMENSIONS [mm]
length*
CONNECTIONS [DN]
concentrate
permeate
INIRO 40
900
1800
500
15
15
15
INIRO 50
900
1800
500
15
15
15
900
1800
500
15
15
15
INIRO 100
INIRO 75
2600
1800
600
20
15
15
INIRO 150
2600
1800
600
20
15
20
INIRO 200
2600
1800
600
25
15
25
INIRO 250
2600
1800
600
32
15
25
INIRO 300
4100
1800
1000
32
15
25
INIRO 400
4100
1800
1000
32
20
32
INIRO 500
4100
1800
1000
40
20
32
INIRO 650
4100
1800
1000
50
25
40
INIRO 800
4100
2000
1000
50
25
40
INIRO 1000
4100
2000
1000
50
32
50
*recommended additional length for membrane service on each side of the plant is 1000 mm
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
MINIRO/INIRO ENG 2/2
CATALOG MAK CMC 2014 - Page 39
ELECTRODEIONIZATION PLANTS
TYPE EDION
Electrodeionization (EDI) is a method of
continuous water deionization. With proper
feed water pre-treatment and without use of
aggressive chemicals (acid, caustic), very low
outlet electro-conductivity (0,06 µS/cm), silica
(5 ppb) and total organic carbon (TOC) levels
can be achieved. There is also no need to treat
concentrate water.
APPLICATIONS:
steam generators
pharmaceutics
electronics, microelectronics
analytical laboratories
technology
EDI SCHEMATIC
E-CELL
INLET
DILUTE
DILUTE RINSE
CONCENTRATE
ELECTRODE
OUTLET
E-CELL SCHEMATIC
INLET
ANODE (+)
SO4=CI- NO3- HCO3-
HSiO3- CO3= OH-
ANION MEMBRANE
DILUTE
CATION MEMBRANE
Ca++
CI- NO3-
Mg++
Na+
HCO3- SO4=
H+
Na+
CONCENTRATE
H+
ELECTRODE
OUTLET
HSiO3- CO3= OH-
ANION MEMBRANE
CATION MEMBRANE
Ca++
Mg++
Na+
CATHODE (-)
Power
supply(2)
Hydraulic connections (DN)
Nominal
flow(1)
(L/h)
Inlet
Outlet
1
1100
15
15
15
2
2200
15
15
15
3
3400
25
15
4
6800
40
5
10200
50
Plant
size
(1)
Electrode Electrode
intlet
outlet
Plant overall
dimensions
lxwxh
(mm)
Imax.
(A)
Pmax.
(kW)
15
5,2
0,8
800 x 600 x 1800
15
10,4
1,6
800 x 600 x 1800
15
15
5,2
2,08
800 x 600 x 1900
40
15
15
10,4
4,2
1200 x 800 x 2100
50
15
15
15,5
6,2
1800 x 800 x 2100
Inlet pressure: 4,8 - 6,9 bar; pressure drop: 1,4 - 2,4 bar
(2)
Voltage: 400V AC; rectifier output: 150/400V DC
Working temperature: 4,4 - 38 0C
Recovery: up to 95%
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
EDION ENG 1/1
CATALOG MAK CMC 2014 - Page 40
PRODUCTS
MEASUREMENTS & CONTROL
COOLING WATER BLOW DOWN CONTROL UNITS TYPE DESAL
CATALOG MAK CMC 2014 - Page 41
COOLING WATER BLOW DOWN CONTROL UNITS
TYPE DESAL
Besides automatic blowdown control in order to maintain the amount of dissolved solids at an
appropriate level, DESAL plants also control dosing of following chemicals:
- scale and corrosion inhibitor (proportional to make up water flow)
- biocide (time controlled)
(option)
programmable
digital
display
di08
DESAL STANDARD COMPONENTS:
- microprocessor control unit
- conductivity measuring unit
- actuated membrane blowdown valve, PVC PN10
- (option) air compressor (for pneumatic control of membrane blowdown valve)
- (option) manual valves with corresponding pipe connections, PVC PN10
- (option) programmable digital display di08
SIZE
1
2
3
4
5
6
DN
15
20
25
32
40
50
BLOWDOWN CAPACITY (Qnom)
m3/h
1,6
2,5
3,5
6
9
15
EXPECTED COOLING POWER (OPERATIONAL)
MW
0,5
0,75
1,1
2
3
5
HYDRAULIC CONNECTION
unit
Dimensions of electrical cabinet:
350 × 500 × 200 mm
Voltage:
50 Hz/230 V
Compressor (option):
1,5 kW
Conductivity measuring unit:
- measuring range: 0 – 20 mS/cm
- output: 4 – 20 mA
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
DESAL ENG 1/1
CATALOG MAK CMC 2014 - Page 42
PRODUCTS
UV DISINFECTION
UV DISINFECTION - UV SYSTEMS
CATALOG MAK CMC 2014 - Page 43
UV DISINFECTION
Ultraviolet or UV light is electromagnetic radiation with wavelengths between 200 nm and
400 nm (nanometres). Disinfection with UV light takes place when water flows through
reactor, where microorganisms are exposed to energy of photons in UV-C spectrum
(200–280 nm). At that time genetic material (DNA) of microbe cells is damaged and their
reproduction ability is stopped so they are unable to cause diseases. UV light is used for
disinfection of water, other liquids and solutions, air and surfaces.
Disinfection with UV light is a non-chemical method, therefore harmful oxidised disinfection
by-products (DBPs) are not formed, as it is the case when chlorine, for example. In special
applications, UV light is used to remove chlorine and ozone residual and oxidation of
organic matter.
is among world leaders in UV technology. 3rd party verified systems are
widely used for disinfection of:
- drinking water
- waste water
- process water in industrial applications - e.g. pharmaceutics, food, beverage industry and
anywhere water disinfection is needed
- fish farming, aquariums...
- water for air humidifiers, air conditioning systems, snow cannons...
- swimming pool water
- water on ships and trains...
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
UV DISINFECTION ENG 1/2
CATALOG MAK CMC 2014 - Page 44
UV SYSTEMS
SERIES
APPLICATION
CAPACITY
AQUADA
- drinking water for
max. 11 m3/h
PHOTO
private homes, schools,
farms, hotels, hospitals, etc.
- air conditioning systems
- fish farming (fresh water)
A
- private and municipal drinking water supplies
max. 26 m3/h
- avoiding the growth of Legionella in warm
water systems
- fish farming (fresh water)
- process water for industrial uses
- beverage and food industry
- air conditioning systems
A/B-PE
- sea water
max. 400 m3/h
- corrosive media
- fish farming
- thermal springs
- swimming pools
SA
- drinking water
max. 26 m3/h
supply on vessels
- off-shore applications
(fresh water)
SPEKTRON
- private and municipal drinking water supplies
max. 950 m3/h
- beverage and food industry
- process water for industrial use
- fish farming (fresh water)
- swimming pools
BX
- private and municipal drinking water supply
max. 2200 m3/h
- process water for industrial use
- beverage and food industry
- swimming pools
E/ME
- process water
max. 100 m3/h
and fully deionized
water for industrial uses
- air conditioning systems
- sea water
E/ME PHARMA - purified water systems
max. 100 m3/h
in pharmaceutical industry
- process water
and fully deionized water
for industrial uses
- disinfection and residual
ozone destruction
- water systems for biotechnology
K
- municipal
drinking water
from 500 m3/h
to > 5000 m3/h
supplies
LBX
- biologically treated waste water
max. 1400 m3/h
- process water
- special drinking water qualities
- sugar syrup
- ballast water on ships
TAK 25
- biologically treated waste water
max. 115 m3/h
- process water
- disinfection in open channels
TAK 55
- waste water
several
- disinfection
1000 m3/h
- disinfection in open channels
TE/TA
- immersion lamps to prevent
/
bacteria growth in water tanks
- headroom disinfection for storage tanks
- surface disinfection
- operation in warm/cold water and air
25 years MAK CMC ©1989-2014
UV DISINFECTION ENG 2/2
CATALOG MAK CMC 2014 - Page 45
APPLICATIONS
CATALOG MAK CMC 2014 - Page 46
APPLICATIONS
WATER FILTRATION WITH GRANULAR MEDIA
CATALOG MAK CMC 2014 - Page 47
WATER FILTRATION WITH GRANULAR MEDIA
Application includes plants for filtration, iron and manganese removal and deodorization
(sulfide) of drinking water in smaller communities and smaller towns.
Operation is based on water flow through different granular media.
DRINKING WATER TREATMENT PLANT ČEHOVINI
DRINKING WATER TREATMENT
Location
Čehovini (SLO)
Filtration, disinfection: chlorination (sodium hypochlorite)
Processes
Type of plant
INIF 6
Number of filter vessels
1
Capacity
7,2 m3/h
DRINKING WATER TREATMENT PLANT LOGATEC
DRINKING WATER TREATMENT
Location
Logatec–Turkova grapa (SLO)
Filtration, disinfection: chlorination (sodium hypochlorite)
Processes
Type of plant
INIF H8–36375P
Number of filter vessels
2
Capacity
18 m3/h
DRINKING WATER TREATMENT PLANT MAHNIČI
DRINKING WATER TREATMENT
Location
Mahniči(SLO)
Processes
Filtration, disinfection: chlorination(sodium hypochlorite)
Type of plant
INIF H4
Number of filter vessels 2
Capacity
8m3/h
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
FILTRATION ENG 1/5
CATALOG MAK CMC 2014 - Page 48
WATER FILTRATION WITH GRANULAR MEDIA
DRINKING WATER TREATMENT PLANT SODRAŽICA
DRINKING WATER TREATMENT
Sodražica (SLO)
Location
Filtration, coagulant dosage
Processes
INIF H9–363–75P
Type of plant
5
Number of filter vessels
Capacity
90 m3/h
DRINKING WATER TREATMENT PLANT VASILEVO
DRINKING WATER TREATMENT
Location
Vasilevo (MACEDONIA)
Processes
Filtration, coagulant/flocculant dosage
disinfection: dosage (sodium hypochlorite)
Type of plant
INIF H9
Number of filter vessels
6
Capacity
108 m3/h
DRINKING WATER TREATMENT PLANT VELIKO POLJE
DRINKING WATER TREATMENT
Location
Veliko Polje (SLO)
Filtration, disinfection: chlorination (sodium hypochlorite)
Processes
Type of plant
INIF H3 – 20
Number of filter vessels
1
Capacity
2,3 m3/h
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
FILTRATION ENG 2/5
CATALOG MAK CMC 2014 - Page 49
WATER FILTRATION WITH GRANULAR MEDIA
DRINKING WATER TREATMENT PLANT VIPAVA
DRINKING WATER TREATMENT
Location
Vipava (SLO)
Processes
Filtration, coagulant/ flocculant dosage,
disinfection: UV and chlorination(sodium hypochlorite)
Type of plant
INIF 2200H
Number of filter vessels
4
Capacity
216 m3/h
WATER TREATMENT PRISTAVA - FARME IHAN
DRINKING WATER TREATMENT
Location
Pristava pri Krškem (SLO)
Filtration, iron and manganese removal, deodorization
Processes
Type of plant
INIF H9 – 363 – 63P
Number of filter vessels
1
Capacity
10 m3/h
PHYSICO–CHEMICAL PARAMETERS
Paramater
Unit
Entry
Iron (Fe)
(mg/L)
4,36
Manganese (Mn)
(mg/L)
0,264
Significant (H2S – sulfide)
Odor
Turbidity
(NTU)
11
Exit
< 0,05
< 0,05
Odorless
0,3
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
FILTRATION ENG 3/5
CATALOG MAK CMC 2014 - Page 50
WATER FILTRATION WITH GRANULAR MEDIA
DRINKING WATER TREATMENT PLANT GOLIŠČE
DRINKING WATER TREATMENT
Location
Golišče (SLO)
Processes
Filtration, iron and manganese removal
Type of plant
INIF 4 and INIF 5
Number of filter vessels
2
Capacity
3,5 m3/h
PHYSICO–CHEMICAL PARAMETERS
Parameter
Unit
Iron (Fe)
(mg/L)
Manganese (Mn)
(mg/L)
Turbidity
(NTU)
Entry
7,73
0,835
>5
Exit
< 0,01
< 0,01
0,1
WATER TREATMENT – NYAGAN HOSPITAL
DRINKING WATER TREATMENT
Location
Nyagan Hospital (RUSSIAN FEDERATION)
Processes
Filtration, iron and manganese removal,
disinfection: UV and chlorination (sodium hypochlorite)
Type of plant
INIF D9
Number of filter vessels
2
Capacity
25 m3/h
PHYSICO–CHEMICAL PARAMETERS
Parameter
Unit
Entry
Iron (Fe)
(mg/L)
4,0
Manganese (Mn)
(mg/L)
0,50
Turbidity
(NTU)
2,5 – 3,5
Exit
< 0,05
< 0,1
< 0,1
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
FILTRATION ENG 4/5
CATALOG MAK CMC 2014 - Page 51
WATER FILTRATION WITH GRANULAR MEDIA
WATER TREATMENT TERME 3000 – well MTV1 (T=45oC)
COLD PROCESS WATER TREATMENT–well MT1
Location
Terme 3000 – Moravske toplice (SLO)
Filtration, iron and manganese removal
Processes
Type of plant
INIF 2000D
Number of filter vessels
2
Capacity
72m3/h
PHYSICO–CHEMICAL PARAMETERS
Parameter
Unit
Iron (Fe)
(mg/L)
Manganese (Mn)
(mg/L)
Turbidity
(NTU)
Entry
0,319
0,197
1
Exit
< 0,01
0,01
< 0,2
o
WATER TREATMENT TERME 3000 – well MT6 (T=65 C)
HOT THERMAL WATER TREATMENT–wellMt6
Location
Terme 3000 – Moravske toplice (SLO)
Processes
Filtration. iron removal
Type of plant
INIF 2000D
Number of filter vessels
2
Capacity
72 m3/h
PHYSICO–CHEMICAL PARAMETERS
Parameter
Unit
Iron (Fe)
(mg/L)
Manganese (Mn)
(mg/L)
Turbidity
(NTU)
Entry
0,137
0,024
1
Exit
< 0,05
< 0,02
< 0,2
DRINKING WATER TREATMENT PLANT ŽIHLAVA
DRINKING WATER TREATMENT
Location
Žihlava (SLO)
Filtration, iron and manganese removal, deodorization,
Processes
disinfection: chlorination (sodium hypochlorite)
Type of plant
INIF D9 – 363
Number of filter vessels
2
Capacity
19,8 m3/h
PHYSICO–CHEMICAL PARAMETERS
Parameter
Unit
Iron (Fe)
(mg/L)
Manganese (Mn)
(mg/L)
Turbidity
(NTU)
Entry
0,290
0,078
1,0
Exit
< 0,02
< 0,05
< 0,2
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
FILTRATION ENG 5/5
CATALOG MAK CMC 2014 - Page 52
APPLICATIONS
DISINFECTION AND OXIDATION IN WATER TECHNOLOGY
CATALOG MAK CMC 2014 - Page 53
DISINFECTION AND OXIDATION IN WATER TECHNOLOGY
The following methods are used for disinfection in water technology:
Chlorination with gaseous chlorine or sodium hypochlorite
Disinfection with chlorine dioxide
UV disinfection and
ozonation (ozonation is primarily an oxidizing process)
Choosing a disinfection method depends on water type and composition, type of microbiological
pollution, plant capacity, specific conditions in which the plant for water treatment operates, etc.
Introduction
The UV disinfection process from the above listed methods is specific; it runs without adding any substances in the water. UV
light affects the microorganisms, so that the energy of its photons damages the DNA and thereby these cannot reproduce
successfully and cause diseases. The method is suitable for disinfection of drinking and process water (1) and waste water (2).
Chlorination with gaseous chlorine and sodium hypochlorite is suitable for water disinfection with low content of organic substances.
Plants for electrolytic production of NaOCl at the place of use (4) present an interesting alternative to gaseous chlorine.
Chlorination at higher contents of organic substance is substituted with chlorine dioxide which is produced by mixing 7.5 %
of NaClO2 and 9% of HCl. Chlorine dioxide also breaks through biofilms at the walls of pipe systems and reservoirs (5).
Ozonation is predominately an oxidizing process. It is primarily used in water pretreatment. It also improves the coagulation characteristics of suspended particles in the water. It is an excellent method for oxidizing Fe, Mn, H2S, organic
substances, etc. It is produced in special generators, where oxygen molecules (O2) are split in the presence of a strong
electrical field into specific atoms (O) which are then combined into ozone molecules (O3). Due to its high oxidizing
potential ozone is also used as a very efficient disinfection substance (3).
1 PRESSURE
UV REACTOR
SODIUM HYPOCHLORITE
4 GENERATOR
REACTOR
2 UV
IN A CANAL
3 OZONE
GENERATOR
CHLORINE DIOXIDE
5 GENERATOR
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
DISINFECTION AND OXIDATION ENG 1/1
CATALOG MAK CMC 2014 - Page 54
APPLICATIONS
CHLORINE DIOXIDE SOLUTION (Biostream® ZERO system)
PREPARATION AND DOSING PLANTS
CATALOG MAK CMC 2014 - Page 55
CHLORINE DIOXIDE SOLUTION (Biostream® ZERO
system) PREPARATION AND DOSING PLANTS
ClO2 solution can be prepared by peroxo-disulfate method by mixing liquid component
(sodium chlorite) with solid component (sodium peroxo-disulfate). Solid component is added
to the liquid component 24 hours prior to use. Such ClO2 solution is stable for application for
up to 3 months.
2 NaClO2
sodium
chlorite
liquid component
Na2S2O8
sodium
peroxo-disulfate
ClO2
2 Na2SO4
chlorine
dioxide
sodium
sulphate
solid component
This method is recommended especially for disinfection of:
•small public drinking water supply systems
•hot sanitary water systems
•heating, ventilation and air conditioning systems (HVAC)
and very effectively for Legionella control and prevention.
ClO2 prepared by peroxo-disulfate method ensures all benefits of ClO2 as a disinfectant and oxidant with very low level of
health and occupational exposure risk.
Dosing is applied proportionally to water flow or storage tank volume. Dosing plants type DOS D or PRODOS D by
MAK CMC Water Technology Ltd. are being used for this application (please see product brochures).
Benefits of peroxo-disulfate method are:
•easy and safe preparation of ClO solution
•easy handling and storage
•no special safety measures need to be taken
•low investment cost.
2
Biostream® ZERO consumption depends on required ClO2 dose as g ClO2 per m3 of water:
0,2 g ClO2/m3
0,1 g ClO2
/m3
1 l/15 m3 of water
1 l/ 30 m3 of water
Biostream® ZERO can be supplied in plastic containers with content volume of 1L, 5L and 25L.
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
BIOSTREAM ZERO ENG 1/2
CATALOG MAK CMC 2014 - Page 56
CHLORINE DIOXIDE SOLUTION (Biostream® ZERO
system) PREPARATION AND DOSING PLANTS
DOSING PLANT INCLUDING COMMISSIONING
Flow
up to (m3/h) (m3/month)
5(50 )
Dosing plant PRODOS 1/2
EUR
982 + 81
10(250 )
-
Dosing plant PRODOS 3/3+
EUR
-
1183 + 81
Initial supply amount; 5l
EUR
69
-
Initial supply amount; 25l
EUR
-
260
TOTAL NET
EUR
1.132
1.524
DISINFECTION COST (EUR /m3): 0,35 EUR /m3 +/- 20% (depending on water consumption)
(calculation dose 0,1 g ClO2 per m3 of water, with reference to water quality)
CONTROL ANALYTICS
• CHECKIT COMPARATOR ClO
2
measuring range: 0,01-0,2 mg/L
• PHOTOMETER MINIDIRECT ClO
2
measuring range: 0,01-3,8mg/L
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
BIOSTREAM ZERO ENG 2/2
CATALOG MAK CMC 2014 - Page 57
APPLICATIONS
SANITARY HOT WATER TREATMENT
PHYSICO-CHEMICAL AND MICROBIOLOGICAL CONDITIONS
CATALOG MAK CMC 2014 - Page 58
SANITARY HOT WATER TREATMENT
PHYSICO-CHEMICAL AND MICROBIOLOGICAL CONDITIONS
Systems for hot sanitary water treatment and supply have to ensure:
adequate quantity of hot water with proper temperature at every period of the day
microbiological purity of supplied water
the sort of physico-chemical characteristics that prevent scale deposition mechanic and corrosion events that would reduce
efficiency of treatment and supply system (reducing water flow, transfer of scale, sediment), shortening the life expectancy of
equipment and parts of equipment in the system (corrosion, mechanical wear), and indirectly (due to scale and sediment)
questionable microbiological water quality.
General concept for hot sanitary water treatment
SANITARY HOT WATER
USERS
HOT
WATER
TANK
RETURN
SAMPLE
CHEMICAL DISINFECTION
WATER HEATING (THERMAL SHOCK)
INLET WATER
WATER TREATMENT
- INLET WATER FILTRATION (SFS, PATFIL)
- BLENDED SOFT WATER (SANOM, MINOM, INOM)
- WATER DISINFECTION
a) CHLORINE DIOXIDE (Oxiperm Pro; Grundfos)
b) UV DISINFECTION (Aquada, series A, BX; ITT Wedeco)
- ULTRAFILTRATION (Uflex)
- PROPORTIONAL DOSING OF INHIBITORS (Prodos, Irgatreat)
Physico-chemical and microbiological criteria for water treatment:
physical treatment includes entry water filtration (mechanical and cartridge filters, ultrafiltration (1)). This reduces particle content
in the entry water and thereby reduces the probability of mechanical wear of equipment or parts of equipment in the system, the
possibility of sediments, and indirectly reduces the probability of microbiologic water contamination in the system. Ultrafiltration also
functions as a mechanical and microbiologic filter.
chemical treatment: dosage of condensed polyphosphates and silicates (stabilization of water hardness and corrosion prevention(2)
and (3)), partial ion exchange water softening (by reducing water hardness and reducing scale deposition (4)).
disinfection: UV disinfection (5), disinfection with chlorine dioxide (6).
This includes occasional water thermal shock in the system to a temperature of min. 700C which is not the subject of this introduction.
NOTE–see pictures of marked machines on page 2:
1 - SFS, PATFIL; 2 - IRGATREATTM PO 705D; 3 - PRODOS; 4 - SANOM, MINOM, INOM; 5 - UV; 6 - ClO2
If the treatment system is inadequate or does not work optimally occasional curative
procedures are required:
mechanical cleaning of equipment and parts of the system (rinsing, scrubbing),
chemical removal of scale (rinsing with acid water solutions),
process for thermal shock disinfection of the system (dosage of disinfection substances into the system followed by rinsing of
outlet taps and recirculation of system water for a regulated period).
Guidelines for warm
sanitary water quality
Hardness
Phosphate dose
Legionella
ClO2
1-1,5 mmol/l (6-8 0dH)
6,7 mg PO4 / l (max)
0,05- 0,2 mg/l
Concentration of
Legionella bacteria
in drinking water
Measures
CFU/L < 100
100 < CFU/L > 10000
CFU/L > 10000
Regular
Epidemiologic control,
Immediate
yearly
overview and maintenance
thermal shock
system control of the water pipe system or shock disinfection
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
WARM SANITARY WATER TREATMENT ENG 1/2
CATALOG MAK CMC 2014 - Page 59
SANITARY HOT WATER TREATMENT
PHYSICO-CHEMICAL AND MICROBIOLOGICAL CONDITIONS
Devices, mentioned on previous page (photos):
1 SFS, PATFIL
4
2
IRGATREATTM PO 705D
3
PRODOS
SANOM, MINOM, INOM
5 UV (XYLEM WEDECO)
6 ClO2 (GRUNDFOS)
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
WARM SANITARY WATER TREATMENT ENG 2/2
CATALOG MAK CMC 2014 - Page 60
APPLICATIONS
SANITARY HOT WATER TREATMENT
CATALOG MAK CMC 2014 - Page 61
SANITARY HOT WATER TREATMENT
For prevention of corrosion and scale formation, additives / inhibitors in form of condensed
polyphosphates, silicates or their combination are being used to treat sanitary hot water.
Dosing of the additives / inhibitors is done via flow proportional dosing plant (Type PRODOS) into
the entry of sanitary hot water system, boiler hot water tank or heat exchanger.
Successful treatment requires the fulfillment of the following conditions:
Hardness of inlet water up to 2.5 mmol/l (150dH)
Temperature of hot sanitary water up to 600C
Adequate exchange (consumption) of hot sanitary water
Treatment systems designed to prevent high temperatures
(locally) on surfaces in contact with water (heat exchangers).
In case the above mentioned conditions cannot be met, the use of water softeners (SANOM,
MINOM, INOM) can be applied alternatively to reduce water hardness to 1-1.5 mmol/l (5- 8 0dH).
SANOM
MINOM
SINGLE
PLANT
DOUBLE
PLANT
INOM
SINGLE
PLANT
DOUBLE
PLANT
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
CONDITIONING ENG 1/1
CATALOG MAK CMC 2014 - Page 62
APPLICATIONS
PROCESS WATER TREATMENT IN ENERGETICS
CATALOG MAK CMC 2014 - Page 63
PROCESS WATER TREATMENT IN ENERGETICS
STEAM BOILER PLANTS
PLANT TYPE1
(SANOM), MINOM, INOM
MIDEK, INDEK
(MINIRO), INIRO
MIDEM
EDION
MAKE UP WATER TREATMENT
Ion softening
(IX_s)
Ion dealkalization
(IX_a)
Reverse osmosis
(RO)
Demineralization
(IX_d)
Electrodeionization (ED)
STEAM BOILER PLANT
RETURN CONDENSATE
LS
c
ELEKTRO
PREVODNOST
C
M
C
INLET
MEJA DOBAVE
LS
MEJA DOBAVE
M
KOLONA A
SOLNIK
KOLONA B
DOBITEK
PERMEAT
KANAL
KONCENTRAT
LS
STEAM BOILER
PS
SEWERAGE
AUTOMATIC DOUBLE
SOFTENING PLANT
REVERSE OSMOSIS
REZERVOIR OF DI WATER
CHEMICAL TREATMENT
THERMIC WATER TREATMENT (DEAERATION)
CHEMICAL TREATMENT OF FEED WATER (DOS, PRODOS)1
CHEMICAL2 TREATMENT
APPLICATION
MF 851 Oxygen scavenger, scale inhibitor, Make up water: after IX_s, without return condensate; low and medium sized pressure boilers in
dispersant
the food-processing industry and pharmacy (FDA); direct contact: steam – product.
MF 855 Oxygen scavenger, alkalization,
Make up water: after IX_s, IX_a, IX_d, RO, ED; low and medium size pressure boilers in the industry,
scale inhibitor, dispersant
also in the food-processing industry and pharmacy with no direct contact: vapor/steam - product.
MF 880 Oxygen scavenger, scale inhibitor, dispersant, Make up water: after IX_s; protection of the condensate network; low and medium sized pressure boilers in
protection of the condensate network the industry; also in the food-processing industry and pharmacy (FDA); direct contact: vapor/steam–product.
MF 885 Oxygen scavenger, alkalization,
Make up water: after IX_s, IX_a, IX_d, RO, ED; protection of the condensate network;
scale inhibitor, dispersant,
Low and medium sized pressure boilers in the industry; also in the food-processing industry and
protection of the condensate network pharmacy with no direct contact: steam – product.
PO 700 Scale inhibitor, dispersant
Make up water: after IX_s, IX_a,IX_d, RO, ED; low and medium sized pressure boilers in the industry;
Also in the food-processing industry and pharmacy with no direct contact: steam - product.
CD 738 Scale inhibitor, dispersant
Make up water: after IX_s; efficient dispersant substance; industrial steam boiler generators;
Also in the food-processing industry and pharmacy (FDA);direct contact: steam - product.
Make up water: after IX_s; efficient dispersant substance; industrial steam boiler generators;
CD 900 / Scale inhibitor, dispersant
Also in the food-processing industry and pharmacy (FDA); direct contact: steam – product.
CD 903 FDA
CI 720 Oxygen scavenger
Make up water: after IX_s, IX_a, IX_d, RO, ED; oxygen reduction in the feed water; industrial vapor/steam
boiler rooms; also in the food-processing industry and pharmacy with no direct contact: steam – product.
CI 740 Dispersant, alkalization
Make up water: after IX_s, IX_a, IX_d, RO, ED; alkalization of boiler water; combination with – for
example - PO 700; industrial steam boiler rooms; also in the food-processing industry and
pharmacy (FDA); direct contact: steam – product.
RECIRCULATING COOLING SYSTEMS
MAKE UP WATER TREATMENT
Ion softening, partial softening (IX_s)
Reverse osmosis
(RO)
Blow down (desalination)
(OA)
1
2
PLANT TYPE1
(SANOM), MINOM, INOM
(MINIRO), INIRO
DESAL
– See corresponding brochure material from MAK CMC tehnologija vode d.o.o.
– Substances have the common mark IRGATREAT; produced by SUEZ ENVIRONNEMENT.
COOLING TOWER
RECIRCULATING COOLING SYSTEM
LIC
C
INLET
TIC
M
M
LS
LS
CONDUCTIVITY
QIC
V KANALIZACIJO
NOTE: TABLE CONTINUATION ON PAGE 2
AUTOMATIC SINGLE
SOFTENING PLANT
BIOCIDE
INHIBITOR
CHEMICAL
TREATMENT
AUTOMATIC BLOW DOWN
(DESALINATION)
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
ION SOFTENING ENG 1/2
CATALOG MAK CMC 2014 - Page 64
PROCESS WATER TREATMENT IN ENERGETICS
CHEMICAL TREATMENT (DOS, PRODOS)1
CHEMICAL2 TREATMENT
APPLICATION
Open recirculating cooling systems; Make up water: partially softened water, non-softened(conditionally)
AS 100 Scale inhibitor, dispersant
MF 315 Scale inhibitor, corrosion inhibitor,
Open recirculating cooling systems;
dispersant, inhibitor of Cu Corrosion Make up water: soft and partially softened water.
MF 335 Scale inhibitor, corrosion inhibitor,
Open recirculating cooling systems;
dispersant, inhibitor of Cu Corrosion Make up water: soft, partially softened, de-alkalized and demineralised water
MF CF3 Corrosion inhibitor, dispersant, inhibitor Open (conditionally) and closed recirculating systems;
of Cu corrosion, protection of Al parts Make up water: soft water.
MF CF5 Corrosion inhibitor, dispersant,
Closed recirculating systems, conditionally also opened recirculating;
Make up water: soft and demineralized water.
Cu inhibitor, protection of Al parts
BC 08 Bactericide, fungicide, S.R.B.
Open recirculating cooling systems.
HOT SANITARY WATER TREATMENT
WATER TREATMENT
Ion softening, partial softening
Conditioning
(IX_s)
(MT)
PLANT TYPE1
SANOM, MINOM, INOM
PRODOS
HOT SANITARY WATER TREATMENT
USERS
C
HEAT
EXCHANGER
INLET
CHEMICAL TREATMENT
CHEMICAL2 TREATMENT
MF 730 / Scale and corrosion
PO 705D inhibitor
APPLICATION
Hot sanitary water,
common water hardness:
4 to 15 odH.
HEATING SYSTEMS
WATER TREATMENT
Ion softening
(IX_s)
Conditioning
(M)
CHEMICAL TREATMENT
CHEMICAL2 TREATMENT
MF 855 Oxygen scavengers,
alkalization, scale inhibitor,
dispersant
MF CF5 Corrosion inhibitor, dispersant,
inhibitor of Cu corrosion,
protection of Al parts
M
TIC
LS
TO DRAIN
PROPORTIONAL
DOSING PLANT
PARTIAL
SOFTENING
HOT WATER BOILER BATTERY
HEATING SYSTEMS
PLANT TYPE1
SANOM, MINOM,
INOM, MINMEH
DOS
APPLICATION
Heating system with
open expansion, make
up water: soft water
Closed heating systems;
make up water: soft
and demineralized water
M
INLET
LS
UNDERFLOOR HEATING SYSTEM
BOILER
HEATING SYSTEM
TREATMENT
WATER SOFTENER
AIR-CONDITIONING (SPRAY CHAMBERS)
MAKE UP WATER TREATMENT
PLANT TYPE1
Ion softening, partial softening (IX_s) SANOM, MINOM, INOM
Reverse osmosis
(RO) MINIRO, INIRO
Treatment
(M)
PRODOS, DOS
AIR-CONDITIONING (SPRAY CHAMBERS)
INLET
AIR
FLOW
C
CHEMICAL TREATMENT
CHEMICAL2 TREATMENT
APPLICATION
AS 100 Scale inhibitor, dispersant Air-conditioning, air
humidification, make up
water: partial softened water
1
2
– See proper brochures from the company MAK CMC tehnologija vode d.o.o.
– Substances have the common mark IRGATREAT; produced by SUEZ ENVIRONNEMENT.
M
LS
TO DRAIN
PARTIAL SOFTENING
TYPE MINOM
PROPORTIONAL
DOSING
AIR-CONDITIONING
(SPRAY CHAMBERS)
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
ION SOFTENING ENG 2/2
CATALOG MAK CMC 2014 - Page 65
APPLICATIONS
ACCOMPANYING EQUIPMENT IN WATER TREATMENT IN ENERGETICS
CATALOG MAK CMC 2014 - Page 66
ACCOMPANYING EQUIPMENT
IN WATER TREATMENT IN ENERGETICS
NEVTROK
MINDOS
Condensate neutralization
Batch
dosator
HLAV
sample
160
cooling
water
inlet
16
5
295
500
340
Sample
cooler
255
DN8 (1/4’’)
OUTLET R1 ¼”
INLET R1”
DN10 (3/8’’)
150
Material: AISI 304
Test pressure: 25 bar
-
drainage
-
LOVIBOND
FILLER
-
DN15 (1/2’’)
equipment for
field analysis
INLET R1”
OUTLET R1 ¼”
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
ACCOMPANYING EQUIPMENT ENG 1/1
CATALOG MAK CMC 2014 - Page 67
APPLICATIONS
WATER TREATMENT IN HEATING SYSTEMS
CATALOG MAK CMC 2014 - Page 68
WATER TREATMENT IN HEATING SYSTEMS
Water with various temperature regimes is used as a medium for heat transfer in heating system circuits. There
are many kinds of heating systems which are especially dependent on the type of heating device (hot-water* or
warm-water boiler**) and system implementation (district heating or floor heating, open expansion or a closed
system with a direct pump, heat exchangers, etc.). Heating systems are roughly divided into:
1. Warm-water heating systems
The usual temperature regime is 90°C in pre-flow, and 70°C in return flow system. Expansion vessels – which can
be open or closed - are typically used in these types of systems.
2. Hot-water heating system
Water pressure in the system is higher than the atmospheric pressure and that is why temperatures at pre-flow
and return flow are higher than 100°C (for example: 110/90 or 130/110).
3. Low-temperature heating systems
The system operates at maximum water temperature of 75°C in pre-flow and 40°C in return flow. Low-temperature
heating is especially suitable for floor, wall or ceiling heating, as well as solar heating and heat pumps.
(*A hot-water boiler is a device that heats water over 100°C.)
(**A heating boiler is a device that heats water up to 100°C.)
Problems caused by inadequately treated water in heating systems can be divided into three sections:
1. Corrosion of metal materials included in the system.
Most corrosion processes in heating systems occur due to oxygen presence and inadequate combination of built-in
materials in direct and indirect contact (ferroalloy/copper/aluminum, stainless steel/galvanized elements, copper
alloy/aluminum, etc.).
2. Formation of scale on heating elements and pipeline surfaces.
Scale in heating systems is the result of inadequate water treatment (water with exceeded concentration of calcium
and magnesium salts, i.e. hard water) used in first system charging and later for complementing system loss.
3. Accumulation, i.e. concentration of sludge and suspended particles.
Sludge, mud, and suspended particles are also the result of oxygen corrosion on iron steel, the use of chemical
substances on sulfite basis which react directly with dissolved oxygen and cause precipitates, abrasion of materials due
to excessive speed of medium, inadequate cleaning of pipe connections and heating devices before the first charging.
WATER
TREATMENT
IN
HEATING
SYSTEMS
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
HEATING SYSTEMS ENG 1/2
CATALOG MAK CMC 2014 - Page 69
WATER TREATMENT IN HEATING SYSTEMS
Water treatment
Division in heating systems runs as follows:
Water used for charging and completing losses (added/ make up/ water), and
water that circulates between the heating devices and users (system water).
The use of plants for water treatment and chemical substances for conditioning depends primarily on the size (water
volume in the system), type of heating system (temperature regime), type of loss completion (manually or automatically), materials included in the system (iron, copper, aluminum), and physico-chemical characteristics of added/
make up water. The aim of water treatment is to prevent the formation of all types of corrosion, scale, and
suspended substances (except those arising from mechanical abrasion). Water treatment has to comply with all
demands as prescribed by heating system supplier (boiler plants, heat exchangers, etc.).
Water treatment for the heating system can be implemented in two places:
at the entry into the system for filling or completing –make up water
in the heating system – system water.
Make up, water is treated with procedures of ion water softening (plants MINMEH, SANOM, MINOM, INOM), and also
with water demineralization when required (plants: MIDEM, MINIRO, INIRO) from the water supply network.
System water treatment is divided into:
mechanical – partial filtration in by-pass, sludge traps, membrane degassers, in special implementations also
direct softening of system water, and
chemical – dosing corrosion inhibitors, sludge, and dispersants (plants: DOS, PRODOS, MINDOS).
Substances for oxygen reduction, substances for passivation of metal surfaces and dispersants that prevent
sedimentation and accumulation of suspended particles in the system are added to system water. These can then
be eliminated by partial filtration of system water or blow-down (controlled replacement of system water with fresh
make up water).
Adding substances for conditioning heating systems according the effectiveness, that is active components:
1. Oxygene scavengers (sulfite*, hydrazine, DEHA, carbohydrazide, etc.)
2. Substances for passivation of metal surfaces (hydrazine, DEHA, phosphate, silicate) that form a protective film on
metal materials.
3. Polymer dispersants that prevent sedimentation and accumulation of possible formed suspended particles in the
system. These can then be eliminated by partial filtration of system water or blow-down (controlled replacement of
system water with fresh make up water).
(*Sulfites in reaction with oxygen form sulfate ion in system water, due to which the corrosion potential of system water arises in time. In the event
that characteristics of heating system are such as to allow this occurrence the use of a polymer is recommended – consult with MAK CMC d.o.o.).
Type of substances for conditioning of heating system:
1. IRGATREAT MF CF5: prevents corrosion on metal surfaces by forming a protective film, it contains inhibitors for
copper corrosion and offers protection for aluminum elements in heating systems.
2. IRGATREAT CI 2001: substance for oxygen binding that does not contain sulfite, passivation of iron and copper surfaces.
3. IRGATRAT CI CS: substances for adjustment of pH value in system water.
Practical field analytical methods are available for control of operating
parameters and active substances in make up water
and system water of heating systems.
Based on knowledge, long-tem experience and with the support of our suppliers the company MAK CMC
offers customers support and provides for adequately treated water in heating systems which enables
their efficient, long-term uninterrupted and economic use.
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
HEATING SYSTEMS ENG 2/2
CATALOG MAK CMC 2014 - Page 70
APPLICATIONS
RESIDENTAL WATER TREATMENT
CATALOG MAK CMC 2014 - Page 71
CATALOG MAK CMC 2014 - Page 72
APPLICATIONS
WATER TREATMENT FOR AIR HUMIDIFICATION IN HVAC SYSTEMS
CATALOG MAK CMC 2014 - Page 73
WATER TREATMENT FOR AIR HUMIDIFICATION
IN HVAC SYSTEMS
Air humidification is one of the basic operations in HVAC systems.
Purpose: control of relative humidity (30 – 50 %) and air cooling (adiabatic humidification).
Humidification processes:
Adiabatic: spray and contact humidifiers,
pressurized, water-jet: water atomizer nozzles spray fine water droplets at high pressure, directly into air,
humidification with steam.
Treatment of make up water, which is added to the systems, is an important part of each of these processes, because
it influences also the quality of system water (water in collection tank in adiabatic processes). Adequate water
treatment prevents the formation of scale (clogging of nozzles, showers, contact packing, boilers for vapor generation),
corrosion of metal surfaces (spray chambers), pollution of rooms with particles (adiabatic and pressure humidification), bacteriologic pollution of the water system and as a result also air-conditioned rooms (adiabatic humidification).
Guidelines for water quality in HVAC systems are set by local legislation and various recommendations (for example:
VDI 3803), which is generalized and presented in Table 1.
Table 1
TYPE OF HVAC SYSTEM
PARAMETER
pH value
El. conductivity (at a
temperature of 20°C)
Calcium
(Carbonate hardness)
(carbonate) hardness;
hardness stabilized
with an inhibitor
Chloride
Sulfate
No. of aerobic bacteria
Legionella
Ca 2+
Standard air-conditioning
requirements
-
7 - 8,5
-
µS/cm
<1000
< 300
g/m 3
mmol/l
(°dH)
> 20
g/m 3
g/m 3
CFU/ml
CFU/ml
Sterile and
clean rooms
<120
-
< 0.7(4)
mmol/l
(°dH)
ClSO 4 2-
Data processing
areas
<3.5(20)
-
< 180
-
-
< 290
-
-
< 1000
< 100
< 10
<1
Adiabatic humidification (evaporative cooling)
Adiabatic humidification is contact humidification between water and air without energy exchange. At the same time,
it also cools the air proportionally to the accumulated quantity of water vapour. The efficiency of humidification and
cooling depends on the available temperature of the dry thermometer and humidity of the air in the system. Humidification and cooling take place according to a psychrometric adiabatic line.
Contact air-water is usually achieved in two ways:
Water is sprayed counter current into air-flow (spray chambers)
Air and water are in contact at the surface of the wetted packing (plastics, originally also straw).
In both ways, water that does not evaporate into the air phase is collected in the tank under the spray chamber or
packing. Water losses are replaced in the collection tank and returned with recirculating pump back into the
humidification process.
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
AIR HUMIDIFICATION ENG 1/2
CATALOG MAK CMC 2014 - Page 74
WATER TREATMENT FOR AIR HUMIDIFICATION
IN HVAC SYSTEMS
Possible negative effects on the quality of circulating water and air quality in the HVAC system:
increasing salt concentration in circulating water and thereby increased tendency toward scale formation on spray
nozzles or surfaces of contact packing. By increasing salt concentration the possibility of space pollution with salt particles
from drops of water carried by the air also increases. It also increases the corrosion potential of circulating water.
Excessive microbiological pollution of system water.
Measures:
softening or blended-softening of make up water,
dosing of scale inhibitors and occasionally oxidizers to improve the microbiological conditions in the system water,
blow down of the system water (reduction of salts and particles concentration). In larger systems automatic
blow-down is recommended,
UV disinfection of system water.
Recommended water treatment scheme (Scheme 1)
supply fan
spray chamber
dosage of
inhibitor / oxidant
partial softening /
demineralization
collection tank
L
make up
water
blow
down
circulation
pump
hmaks < 1,5 m
UV disinfection
AQUADA
Suitable systems for water treatment: SANOM, MINOM, MINIRO, INIRO, PRODOS, DESAL, AQUADA
Pressurized and water-jet humidification
Water is sprayed directly into the conditioned air by high-pressure nozzles.
Air is thereby humidified and cooled.
Make up water treatment has to prevent the following:
formation of scale on spray nozzles,
particle load in the system; precipitation of remaining dissolved salts is a result of water evaporation. Particles are
deposited on surfaces in contact with conditioned air as dust.
Measures:
minimum required measure is softening or blended-softening of make-up water
HVAC systems requiring higher degree of system water quality utilize water demineralization with reverse osmosis.
Suitable water treatment systems: SANOM, MINOM, MINIRO, INIRO
Vapor humidification
This way requires the use of vapor produced with electric vapor generators for air humidification. Make up water
softening is hereby mandatory.
Suitable water treatment systems: SANOM, MINOM
MAKCMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
Phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44; e-mail: info@ mak-cmc.si; http://www.mak-cmc.si
Share capital: 41.729,26 EUR - registered at the District Court of Ljubljana under entry number 1/03513/00 - VAT number: 71956166
Registration number: 5334136 - IBAN: SI56 0204 5001 0199 644 - SWIFT: LJBASI2X - Bank name: Nova LB d. d., Ljubljana - CEO: Alojz Medic
25 years MAK CMC ©1989-2014
AIR HUMIDIFICATION ENG 2/2
CATALOG MAK CMC 2014 - Page 75
PROGRAMME OF MAKCMC COMPANY
ACTIVITIES
DRINKING
WATER TREATMENT
coagulation, flocculation, sedimentation, filtration,
iron and manganese removal, adsorption, softening,
hardness stabilization (SUEZ), denitrification, arsenic removal,
ultrafiltration (UF), reverse osmosis, disinfection (Grundfos),
chemical storage (Astro) and dosing (Grundfos), mixing (Statiflo)
TECHNOLOGICAL WATER TREATMENT
coagulation, flocculation, sedimentation, filtration, iron and manganese
removal, adsorption, softening, hardness stabilization (SUEZ), denitrification,
arsenic removal, reverse osmosis (RO), electrodeionization (EDI), disinfection (Grundfos),
chemical storage (Astro) and dosing (Grundfos), mixing (Statiflo), ultrafiltration, ion exchange
WATER TREATMENT FOR ENERGETICS (SUEZ))
cooling and heating systems , steam production , chemical cleaning
SANITARY WATER TREATMENT
microfiltration, blended soft water, hardness stabilization (SUEZ), disinfection, chemical cleaning
DRINKING, TECHNOLOGICAL AND WASTE WATER DISINFECTION
ultraviolet (UV) light, ozone [Xylem WEDECO], chlorination, chlorine dioxide [Grundfos]
WATER TREATMENT PLANT AUTOMATION
dosing, filtration, softening, ion exchange, membrane technologies
PHYSICAL AND CHEMICAL WASTE WATER TREATMENT
AND DISINFECTION
coagulation, flocculation, sedimentation, pH control, neutralization,
oxidation, reduction, precipitation of metals, ion exchange (waste
water recirculation), ultrafiltration (oil emulsions), disinfection
(Xylem WEDECO), chemical storage (Astro) and dosing
(Grundfos), mixing (Statiflo)
ANALYTICS
sampling taps, water analysis
equipment (Lovibond)
SERVICES
CONSULTING
DESIGN
EQUIPMENT AND
PLANT INSTALLATION
ANALYTICS AND SYSTEM
FOLLOW-UP
SYSTEM OPTIMIZATION
CHEMICAL CLEANING OF
THERMO-ENERGETIC PLANTS
TRAINING
MAINTENANCE
EQUIPMENT SERVICE
CATALOG MAK CMC 2014 - Page 76
PROGRAMME OF MAKCMC COMPANY
UC
PROD TION
LAMELLA SEPARATORS
FILTERS, IRON AND
MANGANESE REMOVAL PLANTS,
ADSORPTION PLANTS
ION EXCHANGE PLANTS
softening, dealkalization, deionization,
denitrification, arsenic removal
MEMBRANE TECHNOLOGY PLANTS
ultrafiltration (UF), nanofiltration (NF),
reverse osmosis (RO), electrodeionization (EDI)
ANALYTICS AND CONTROL EQUIPMENT, PLANT AUTOMATION
desalting units for cooling systems, water sampling,
conductivity indicators and meters, water-level measurements,
pH and redox measurement and control equipment,
plant management units
CHEMICAL STORAGE AND DOSING
ENT AND SPA
M
RE
IP
CHEMICALS
U
PA
FOR USE IN INDUSTRIAL
EQ WATER
MANAGEMENT (SUEZ)
LY
UPP
SS
RT
CHEM
ICA
LS
,
coagulants, flocculants, oxidation and disinfection
chemicals, chemicals for ion exchange
resin regeneration and pH control, chemicals
for water treatment in energetics,
chemicals for sanitary
water treatment
CHEMICALS FOR USE IN SANITARY
WATER TREATMENT (SUEZ)
MICROFILTERS, CARTRIDGES AND FILLERS
REINFORCED POLYMER PRESSURE VESSELS (Eurotrol)
CHEMICAL-RESISTANT VESSELS AND REACTORS (Astro)
PLASTIC PIPES AND FITTINGS - PVC, PP, PE, PVDF
(Betaplast), (+GF+)
STATIC MIXERS (Statiflo)
AUTOMATION ELEMENTS FOR (Pentair), (Siata), (Fleck)
filters, ion exchangers and membrane technologies
UV AND OZONE SYSTEMS [Xylem WEDECO],
SPARE PARTS AND SERVICE / MAINTENANCE
WATER ANALYTICS - EQUIPMENT (Lovibond) AND SPARE PARTS
FILTRATION MEDIA
sand, anthracite, active carbon, zeolites, silicates,
oxidation media, polyphosphates
ION EXCHANGE RESINS
COAGULANTS, FLOCCULANTS
DISINFECTION AGENTS
SALT TABLETS
for ion exchange
softeners
CATALOG 2014
© MAK CMC 1989 - 2013. All rights reserved.
phone: ++386 (0)1 423 33 55, 423 34 71, fax: 423 40 44
e-mail: [email protected] website: http://www.mak-cmc.si
MAK CMC tehnologija vode d.o.o., Tbilisijska ulica 81, 1000 Ljubljana, SLOVENIJA
CATALOG MAK CMC 2014 - Page 77