Chemitec Consulting Oy Business portfolio Background Chemitec Consulting Oy was established in 1986 by four former Rintekno consultants: Eero Polvinen, M.Sc. (Chem.Eng.) (born 1939), Heikki Jaakkola, M.Sc. (Chem.Eng.) (1946), Risto Rantala, M.Sc. (Chem.Eng.) (1951) and Lassi Mäkinen, B.Sc. (El. & Instr.Eng.) (1951). Principle Our business idea is to offer high tech services for chemical, process and energy industries. To reach our goal, we rely on our experience and extensive use of "state of the art" engineering tools. Our strength is that we always look at the process as a whole, including thermodynamics, balances, equipment and control system behaviour, in order to achieve a reliable and functional result both from a technical and economical point of view. Scope of services § Feasibility studies § Basic design/pre-engineering of plants § Process simulation Chemical process § Energy and mass balance calculation § Environmental permits and emission calculation § Equipment design § Procurement of main and process equipment § Electrical engineering § Automation and Instrumentation § Commissioning and start-up § Project management § Cost estimation Energy Environment Engineering tools CHEMCAD - Process simulation and balance calculation Pipe Flow - Pipeline network balance and pressure drop calculation Matlab / Simulink - Process dynamic calculation HSC – Thermodynamic calculation TMA – Heat exchanger design and rating HTC – Heat transfer calculation Visimix – Mixing calculation Simulis thermodynamics – Compound and mixture properties Corrosion databank for material selection Special database for chemical resistance of plastics and elastomers More than 20 in-house calculation tools for case specific applications Several CAD programs Key Personnel Risto Rantala 1951 Proprietor & Managing Director Process Specialist M.Sc. (Chem.Eng.) Areas of expertise: • Simulation and design of chemical processes • Distillation, crystallisation and other separation technologies • Design and rating of heat exchangers • Process design of speciality chemical plants • Risk analysis Tiina Piira 1965 Process Specialist Lic.Sc. (Tech.), M.Sc. (Chem.Eng) Areas of expertise: • Reaction technology and thermodynamic calculations • Simulation and modelling • Waste management processes • Environmental permits and emission calculations • Plant design for speciality chemical Key Personnel Risto Seppälä 1953 Leading Energy Expert M.Sc. (Mech.Eng.) Areas of expertise: • Project co-ordination and management • Power plant studies and expert services • Power plant basic and detail engineering o Peat combustion o Bio fuel boilers o Coal-fired power plants o Natural gas plants o Waste incineration Markku Ollakka 1951 Leading Energy Expert M.Sc. (Process Eng.) Areas of expertise: • • • • • Solid fuel heat/power plants Process technology Flue gas processes Waste treatment processes Management consulting • Contract engineering CT-Systems Oy Lassi Mäkinen Electrical and Automation Engineer B.Sc. (El. & Instr.Eng.) Areas of expertise: • Electrical engineering • Automation and instrumentation engineering • Control systems • Safety logic • Programming • Commissioning Domestic and global activities Distillation units • Finland • Sweden • Netherlands • China Evaporation units • India UF treatment units • Russia Crystallisation units • Uruguay • Brazil VOC treatment units • Estonia Monochloroacetic acid plants • Poland • Finland CHP & district heating units • Finland • Sweden Heat pump units • Finland Selected references (Chemical process) Brazil Chlorate crystallisation plant (43 tn/a) 2014 -, Kemira S.A., Chemical Island, Ortigueira, Parana State Finland H2SO4 & HNO3 distillation unit (2 tn/h) 2012 – 2014, Oy Forcit Ab, Forcit Explosives, Hanko China Ethanol distillation unit (0,7 Mtn/a) 2011, CP Kelco Biological Co Ltd CMC Mill, Wulian Poland Monochloroacetic acid plant (42000 tn/a) Uruguay Chlorate crystallisation plant (73 tn/a) 2007 – 2008, PCC Rokita SA, Chemical plant, Brzeg Dolny 2005 - 2007, Kemira S.A., Chemical Island, Fray Bentos Estonia Finland 2006, AS ETP Group, Loading & unloading of chemicals, Alexeela Terminal Modification and extension of Isopropanol and methanol recovery unit (1,5 Mtn/a) 1995 – 1997, Metsä-Serla Chemicals Oy, CMC Mill, Äänekoski Burning system of ship loading exhaust gases Russia Conversion plant of depleted uranium hexafluoride 1999 - 2001, Fortum Engineering, Angarsk electrolysis and chemical complex, Angarsk Selected references (Combustion plants) Finland Pellet-fired district heating plant (40 MW) 2014 – , Turku Energia Oy, Turku Bio fuels and peat combustion steam boiler plant (20 MW) Oil steam boiler (2 x 14 MW) 2011 – 2013, VALIO Oy, Lapinlahti Bio fuels and peat combustion CHP power plant (5 MWe/15 MWth) Flue gas condensing and heat recovery unit (2 - 4 MW) 2007 – 2010, Keuruun Lämpövoima Oy, Keuruu Combined district heating and cooling by heat pumps (15-20 MWth/10-15 MWc) with accumulator, waste water as heat source 2006 – 2009 Unit 1, Turku Energia Oy, Turku 2011 – 2013 Unit 2, Turku Energia Oy, Turku Sweden Flue gas condensing and heat recovery unit (5 MW) 2006 – 2007, Fortum Värme AB, Nynäshamn Estonia Bio fuel boilers (2x18 MW) Flue gas condensing and heat recovery unit 2003 – 2004, Tartu Energia AS, Tartu Our strengths • 10 experienced engineers from process, chemical, energy and automation sectors • Competency in providing technical solutions • Broad network of sub-suppliers and contractors • Delivery of worldwide services for multiple engineering field operations • Agile, dynamic working environment • Hold of an extensive print collection in scientific and technical disciplines Contact Chemitec Consulting Oy Address: Tel: Website: Email: Tietäjäntie 2 FI-02130 Espoo FINLAND +358 (0)9 502 1034 www.chemitec.fi [email protected] [email protected]
© Copyright 2025