Wall Forms® WF22 Cutoff Face Surface Mount, Round revision 10/23/14 • kl_wf22_spec.pdf Approvals: Type: Job: Catalog number: WF22 / / Fixture Electrical Module Finish See page 2 Specifications 8D" (219.1 mm) 10K" (266.7 mm) J-box in wall by others. Cutoff Face Surface Mount Light distribution Cutoff Face / Options See page 2 Date: Page: 1 of 2 Surface Mount: Die-cast, low copper (<0.6% Cu) aluminum alloy with double side walls. Zinc plated steel mounting plate supplied for mounting to standard 3" or 4" junction box. Face Plate: Die-cast, low copper (<0.6% Cu) aluminum alloy with vertical and horizontal double ribs covering the full hemisphere. Ribs are minimum D" depth and F" thickness. Secures to housing with four stainless steel captive socket head screws. Cutoff Face: Solid upper half and solid lower half with vertical light baffles. Lens: Flat tempered glass, F" minimum thickness with internal sandblast. Retained in face plate and sealed with a one-piece silicone gasket. Socket: (HID): Porcelain medium base socket rated 4KV. (Fluorescent): Plastic GX24q-3/GX24q-4 base socket. Ballast: All components mounted on housing. (HID): Reactor - High power factor with starting temperatures of -40°F. for HPS and -20°F. for PMH lamp modes. For PMH/120 volt, a step-up transformer is provided. For HPS/277 volt, a step-down transformer is provided. For PMH and HPS/347 volt, a step-down transformer is provided. (Fluorescent): Encapsulated with thermal cutoff. Electronic with multi-voltage (108V to 305V) input, 50/60 HZ, High power factor with starting temperatures of -0°F. Finish: Each luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat finish. Standard colors include (BL) Black, (DB) Dark Bronze, (WH) White, (PS) Platinum Silver, (SG) Stealth Gray, (LG) Light Gray, and (CC) Custom Color (Include RAL#). Finishing Items: Electrical modules and face plates. Each set of finishing items shall be in one container, clearly marked with the fixture catalog number. Caution: Fixtures must be grounded in accordance with national, state, and/or local electrical codes. Failure to do so may result in serious personal injury. Listings and Ratings ETL1 to UL Standards 1598 & 8750 1 U.S. PATENTS: D385,054, D381,452, D378,621 IP66 Rated CE Suitable for wet locations 25C Ambient KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. © 2014 KIM LIGHTING INC. • 16555 EAST GALE AVENUE, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716 Wall Forms® WF22 Cutoff Face Surface Mount, Round revision 10/23/14 • kl_wf22_spec.pdf Type: Job: Page: 2 of 2 Standard Features Fixture£ Cat. No. WF22 Electrical Module HPS=High Pressure Sodium PMH = Pulse Start Metal Halide PL=Compact Fluorescent Cat. Nos. for Electrical Modules available: LampLamp Line Watts Type Volts 70 PMH277 For PMH, HPS and PL. High Pressure Sodium l 50HPS120 l 70HPS120 l 50HPS277 l 70HPS277 l 50HPS347 l 70HPS347 Lamp ED-17, Clear Socket Medium Base1 ANSI BallastS68 Type ED-17, Clear Medium Base1 S62 Pulse Start Metal Halide l 50PMH120 l 50PMH277 l 50PMH347 l 70PMH120 l 70PMH277 l 70PMH347 ED-17, Clear Medium Base1 M110 ED-17, Clear Medium Base1 M98 Compact Fluorescent l 42PL2 Lamp Compact Fluor. Socket GX24q-4 Base All surface mount fixtures use reactor ballasts. 1 42PL operates 26, 32, and 42 watt lamps at 120 thru 277 volts (50-60 Hz.) 2 Finish TGIC powder coat Color: Black Dark Bronze Light Gray Stealth Gray Platinum Silver White Custom Colors3 Cat. No.: l BL l DB l LG l SG l PS l WH l CC Custom colors subject to additional charges, minimum quantities and extended lead times. Consult representative. Custom color description: 3 Optional Features Fusing Cat. No. l SF l No Option Single Fusing for 120V, 277V, and 347V primary. © 2014 KIM LIGHTING INC. • 16555 EAST GALE AVENUE, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716