Extendable Arm Wall Mount for 26” ~ 42” TVs KAWLM42EXTA Quick Start Guide Caution This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children. • • • • • Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of the installation, please contact a professional installer for assistance. The wall or mounting surface must be capable of supporting the combined weight of the mount and the display, otherwise the structure must be reinforced. Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear may result in property damage, injury or death. Please ensure children do not play with the mount or the mounted television at any time. Please check the mount every two months to ensure that bolts and screws are tight, and that the wall behind the mount appears to be in good condition. This product was designed to be installed on solid concrete walls. Before installing, make sure the wall will support the combined load of the equipment and hardware. Never exceed the maximum load capacity of 25kg, or it may result in product failure or personal injury. Note: this product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. Item Checklist What's in the box M4 x 10mm A (4 pcs) M5 x 12mm B (4 pcs) M5 x 16mm C (4 pcs) M5 Washer G (8 pcs) B1 (3 pcs) B2 (3 pcs) B3 (3 pcs) Magnetic removable bubble level M6 x 12mm D (4 pcs) TV Plate Tools required Mounting Step 1-A (Solid concrete mounting) M6 x 16mm E (4 pcs) M6 x 20mm F (4 pcs) Step 1-B Wood stud mounting Step 2 Attaching brackets to Screen Step 3 Hang TV onto the wall plate Before attaching the TV plate to the wall, tighten the top screw nut in case the TV slides off during installation. Tighten the screw nut • • If using A, B, C please use G. If using D, E, F please don't use G. Before tightening security nut 3, please be sure that the TV can be adjusted smoothly after being mounted on the stand. If not, please adjust the nut to get the best feeling for adjustment. Step 4 If you require any additional information regarding the mount or require assistance in regards to a warranty claim, please contact the Kogan customer support team.