– how will they ISO standards arrive in Europe

Because every life has a purpose…
ISO standards – how will they
arrive in Europe
1
Thomas Kruegerke/March 2014
Chairman CEN/TC 79
© MSA 2014
ISO documents for RPD released so far:
General (2)
ISO 16972:2010
Terms, definitions, graphical symbols and units of
measurement
ISO/TS 16974:2011
Marking and information supplied by the manufacturer
© MSA 2014
MSAsafety.com
ISO documents for RPD released so far:
Human Factors (7)
ISO/TS 16976-1:2007 Metabolic rates and respiratory flow rates
ISO/TS 16976-2:2010 Anthropometrics
ISO/TS 16976-3:2011 Physiological responses and limitations of oxygen and
limitations of carbon dioxide in the breathing environment
ISO/TS 16976-4:2012 Work of breathing and breathing resistance: Physiologically
based limits
ISO/TS 16976-5:2013 Thermal effects
ISO/TS 16976-7:2013 Hearing and speech
ISO/TS 16976-8:2013 Ergonomic factors
© MSA 2014
MSAsafety.com
ISO documents for RPD released so far:
Test methods (4)
ISO 16900-2:2009
Test method - Determination of breathing resistance
ISO 16900-3:2012
Test method - Determination of particle filter
penetration
ISO 16900-4:2011
Test method - Determination of gas filter capacity,
migration, desorption and carbon monoxide dynamic
testing
ISO 16900-11:2013
Test method - Determination of field of vision
© MSA 2014
MSAsafety.com
ISO documents for RPD released so far:
Performance (1)
ISO 17420-3:2012
© MSA 2014
Performance requirements —Thread connection
MSAsafety.com
ISO documents for RPD under
development:
Human Factors (1)
ISO/TS 16976-6
© MSA 2014
Psychophysiological effects
MSAsafety.com
ISO documents for RPD under
development:
Test methods (9)
ISO 16900-1
Determination of inward leakage
ISO 16900-6
Mechanical resistance/strength of components and
connections
ISO 16900-8
Measurement of RPD air flow rates
ISO 16900-9
Determination of the carbon dioxide content of inhaled
air
ISO 16900-10
Resistance to ignition, flame, radiant heat and heat
ISO 16900-11
Determination of field of vision
ISO 16900-12
Determination of volume-averaged work of breathing
and peak respiratory pressure
ISO 16900-13
RPD using regenerated breathable gas and special
application mining escape RPD
ISO 16900-14
Measurement of sound level
© MSA 2014
MSAsafety.com
ISO documents for RPD under
development:
General (1)
ISO/TS 16973
© MSA 2014
Classification for RPD, excluding RPD for
underwater application
MSAsafety.com
ISO documents for RPD under
development:
RPD programme (3)
ISO 16975-1
Selection, use and maintenance — Establishing and
implementing a respiratory protective device
programme
ISO 16975-2
Selection, use and maintenance — Overview to
establishing and implementing a respiratory protective
device programme
ISO 16975-3
Selection, use and maintenance —
Part 3: Fit testing procedures
© MSA 2014
MSAsafety.com
ISO documents for RPD under
development:
RPD Performance (2)
ISO 17420-1
Supplied breathable gas devices
ISO 17420-2
Filtering devices
© MSA 2014
MSAsafety.com
ISO to EN
• ISO Standards are voluntary
• EN standards are „mandatory“ under the PPE
Directive
• No conflicting Standards are allowed
© MSA 2014
MSAsafety.com
Proposed Structure of CEN/TC 79
Committee
Scope
Secretariate
Chairperson /
Convenor
TC 79
RPD
DE
Thomas Kruegerke
General
GB
Charles Tracey
WG4
Filtering RPD
DE
Lars Ronner
WG6
Supplied breathable gas RPD
DE
Wolfgang Drews
SC7
Diving RPD
DE
Ian Maxwell
SC9
Test methods
GB
Graham Bostock
SC1
© MSA 2014
MSAsafety.com
Roadmap
Transition
Evaluation period
ISO Standards
period
revised ISO Standards
Revision
UAP
voting
3 years
3 years
??? years
EN ISO Standards
today's EN Standards
© MSA 2014
MSAsafety.com
Roadmap – to do‘s
• Pre-Evaluation period:
© MSA 2014
◘
Check if PPE directive requirements are covered
(key word: “Annex ZA”), if necessary attempt to
influence ISO prior to FDIS
◘
Identify affected ENs
MSAsafety.com
Roadmap – to do‘s
 Evaluation period:
• Impact assessment (to be done by a task group)
• Guide 17: SME (to be done by a task group)
• Readiness of test houses (to be done by WG Test
methods)
• Gap analysis: is ISO covering all aspects of todays EN
Standards (ISO 17420, ISO 16900, ISO 16975) (to be
done by the appropriate WG for products)
• Evaluation for the appropriate duration for the transition
period (to be done by a task group)
© MSA 2014
MSAsafety.com
Roadmap
Transition
Evaluation period
ISO Standards
period
revised ISO Standards
Revision
UAP
voting
3 years
3 years
??? years
EN ISO Standards
today's EN Standards
© MSA 2014
MSAsafety.com