RFID i Danmark presents:
RFID Conference
International RFID Conference in Copenhagen May 21’st
Probably the largest RFID Events in Scandinavia in 2015
We are very pleased to invite to what is probably the largest RFID Event in Scandinavia in 2015.
Following up on the successful conferences in 2011, 2012, 2013 and 2014, RFID i Danmark and partners are
organizing this Conference with international keynote speakers, exhibition, networking and a number of
actual end-user case study presentations.
IT-University of Copenhagen · Rued Langgaards Vej 7 · DK-2300 Copenhagen S
Registration: 2015.rfididk.org/registration/
Cases:
Keynote by Frank Honore,
Google. The RAIN Alliance was
founded in 2014 to promote,
educate and increase awareness of UHF RFID to businesses
and consumers worldwide. AIM
Global, Impinj and Smarttrac were
not very surprising as organisations behind the initiative but
on the list were as well Intel and
Google. For the first time the
RAIN Alliance will be properly
introduced to Scandinavian
companies and organizations.
Organizers:
Efficiency increase by RFID in
tool-making and toolmanagement. In tool-making and
tool-management it is required to
identify each individual component whenever a tool is moved,
installed or maintained. Identification is usually enabled by code
engraved or printed on a surface
or by an attached ID plate. This
kind of identification, as well as
paper instructions, is prone to
mechanical defects and mistakes
due to its manual read-out.
Pervasive RFID! Keynote presentation by Pankaj Shukla, Director,
Global RFID Market Development
at Zebra Technologies
Over the last decade, RFID has
established itself as a technology
of immense value because of its
high accuracy, speed of use and
ability to solve variety of use cases
in multiple verticals.
New Danish RFID case in manufacturing – Hilding Anders
Hilding Anders has been helping
people get a good night’s sleep
since 1939; “We are proud to
deliver beds and mattresses for all
needs – from the most basic, to
the most exclusive. Over the last
decade, Hilding Anders has acted
as a consolidator in the European
bedding industry. 14 acquisitions
in ten years have made Hilding
Anders the undisputed leader in
their core geographies: Europe
and Asia..
Welcome
RFID i Danmark 2015 Conference
Increased efficiency and competitiveness
through tracking and tracing
Implementation of tracking and tracing technologies
– typically by the use of radio waves – have already increased efficiency and competitiveness for a number of
companies, in Denmark and around the world.
But, most companies – private as well as public – haven’t
even started yet.
At the annual RFID i Danmark conference, a number of
leading Danish and international companies will share
their experiences;
1 Why did they implement tracking and tracing technology?
2 Have significant advantages been achieved?
3 How could they justify the initial investment?
4 What Lessons learned during the implementation of
tracking and tracing?
5 What to do different, if they were to start from scratch
again?
6 Future plans with more tracking and tracing?
You can meet representatives from companies using
RFID in their production, logistics, retail business, service
maintenance history, localisation of employees and assets – along with representatives from both manufactur-
ers of RFID equipment and tags as well as providers of
RFID based solutions.
They will share with you their experiences on how they
use RFID to optimize processes and create business value
in their particular company.
We will have high level visionary key note presentations
in plenum and we will again this year go into smaller
groups in parallel tracks.
This year we will have a track with use cases and in parallel we will have two WORKSHOPS. The focus of the use
cases will not be on the technologies, but rather on how
companies achieve advantages through the use of the
technologies.
The list of presentations will continuously be updated
here PRESENTATIONS where you also can find further
information about each presentation.
To learn more about current solutions and products you
get this unique opportunity to explore our RFID exhibition. Where suppliers will be ready to explain, demonstrate and answer your questions. The list of exhibitioners will be updated on EXHIBITORS..
Henrik B. Granau
Founder of RFID i Danmark
The conference offers
· Insight in innovative RFID solutions
· Insight into RFID cost / benefit
· Inspiration for your own business
· Networking and knowledge sharing
IT-Universitetet, Copenhagen
The IT University of Copenhagen is the youngest university in
Denmark (established in 1999). The IT University strives to create
value with IT and deliver top quality research and education within
a wide range of information technology subjects; from e.g. design
and games development to business and computer science.
Approximately 2,500 students are enrolled at the university, and it
has a staff close to 500, among them 50 PhD’s and 70 tenured faculty. More than half of the latter are from abroad. Most researchers
participate in collaborative projects with private companies, public
institutions and foreign researchers.
Web: www.itu.dk
Contact: Jørgen Staunstrup, [email protected]
.
Main sponsor:
Denmark
Platin sponsor:
Sponsors:
Premium sponsor:
Granau IT
RFID i Danmark
Denmark
It is the intention that on a non-profit basis the network is to be the gathering of all RFID activities in Denmark
and the purpose is to create opportunities and enhance competitiveness of both public and private companies
in Denmark through usages of RFID technology.
The network, which is organised as an association, works to reach its goals through exchange of experience,
construction of a public accessible knowledge database about RFID, newsletters and hosting of events.
Key-note Presentations in Plenum
Plenum in Auditorium 1
08.00-09.00
09.00-09.15
09.15-09.30
09.30-09.50
09.50-10.20
10.20-10.50
Arrival and registration Welcome by Jørgen Staunstrup, IT University
Introduction to RFID i Danmark 2015 by Henrik B. Granau, RFID i Danmark
Highlights from RFID Journal Live 2015 in San Diego by Henrik B. Granau
Pervasive RFID! by Pankaj Shukla, Director, Global RFID Market Development at Zebra
Over the last decade, RFID has established itself as a technology of immense value because of its high accuracy, speed
of use and ability to solve variety of use cases in multiple verticals.In this presentation, we will take a closer look at why
RFID has so much appeal, the current trends in various industries and RFID technology itself; RFID’s use cases and
benefits and lessons it has offered on this journey from a gee-whiz technology to a matured operational technology.
The RAIN Alliance and why Google was a co-founder by Dr. Frank Honore,
System Architect at Google [x], Life Sciences
The RAIN Alliance was founded in 2014 to promote, educate and increase awareness of UHF RFID to businesses and
consumers worldwide. AIM Global, Impinj and Smarttrac were not very surprising as organizations behind the initiative
but on the list were as well Intel and Google (!)For the first time the RAIN Alliance will be properly introduced to Scandinavian companies and organizations and with the help from AIM Denmark we are proud to present to you both the
RAIN Alliance – and why your organizations should consider joining the alliance – and Google’s own explanation on
why they was a co-founder on the initiative.
10.50-11.00
11.00-11.30
Introduction to IT University projects with iBeacons
11.30-12.40
Presentations and Workshops in parallel (see page 6-9)
12.40-13.40
13.40-14.50
14.50-15.20
Lunch and Exhibition
15.20-15.50
Moods of Norway Increases Sales via RFID by Hans Petter Hübert, Supply Chain Manager
Moods of Norway has equipped 13 of its stores with RFID technology to better manage its inventory. This deployment
follows a six-month pilot that boosted sales of men’s shirts and suits by double digits. During the pilot (which consisted
of tagging men’s shirts and suits, and using a handheld reader to conduct inventory counts on the sales floor), the system
not only provided 98 to 99 percent inventory accuracy, but also reduced the amount of labour employees spent performing manual inventory checks, thereby enabling more frequent checks.
15.50-16.20
What is next? by Awareness
Track physical behavior and use Intelligent On-Site Marketing on “Point of Interest” by combining Apps, Wifi, Beacons
and mCRM
16.20-16.30
Wrap-up and Closing Remarks by Henrik B. Granau, RFID i Danmark
Coffee and Exhibition
Presentations and Workshops in parallel (see page 6-9)
Coffee and Exhibition
The agenda is subject to alterations.
150507_DENMARK_A5-Adv.V11.pdf
1
07-05-15
12:19
Presentations in Auditorium 1 - 11.30-14.50
11.30-11.50
11.55-12.15
12.20-12.40
12.40-13.40
While Workshops are conducted in parallel in separate rooms,
the following presentations are presented in Auditorium 1. Efficiency increase by RFID in tool-making and tool-management by Yilmaz Benzer, Sales Manager
Neosid Pemetzrieder GmbH & Co.KG
In tool-making and tool-management it is required to identify each individual component whenever a tool is moved,
installed or maintained. Identification is usually enabled by code engraved or printed on a surface or by an attached ID
plate. This kind of identification, as well as paper instructions, is prone to mechanical defects and mistakes due to its
manual read-out. A RFID system provides a machine-readable identification of tools and components. With all tool data
and instructions stored centrally and interaction with ERP software, the system enhances efficiency and reduces
mistakes by relieving workers. It enables automatic documentation and represents the basis for an automated toolproduction and –management.
Real Time Lorry Inventory on the Road by Geir Vevle, HRAFN
- proof of delivery
- proof automatic goods receival
- proof of pickup
New Danish RFID case in manufacturing – Hilding Anders by Michael Holm Pedersen, Production Manager at
Hilding Anders Denmark
In the continuous improvement of automation and introduction of a new MES solution in Denmark, Hilding Anders
realized that an advanced RFID platform was necessary to feed machines and IT-systems with live data. RFID improves
the flexibility of the production, automates processes, reduces the risk for potential errors and delivers live data to the
management about production flow.
Lunch and Exhibition
13.40-14.00
Welcome to the 21st century’s cellar – The ultimate wine partner by Mathieu Nidegger,
Co-Founder of La Cave Vivante
La Cave Vivante offers a comprehensive and innovative approach to wine cellar management for both private and
professional users. Our objective is to offer an automated just-in-time cellar management system that minimizes the
financial investment of the user while simplifying the management of his cellar. To do this, we have developed a mobile
application synchronized with an RFID recognition system installed inside the cellar of our customers. The system automatically monitors every entry or exit. No need to keep a wine cellar book, the stock is automatically updated.
14.05-14.25
Garment management at the Hospital by Lasse Cederquist, 2trace
– Hygiene quality and powerful management tools
14.30-14.50
RFID projects in Italy by Luca Nardini, CAEN RFID Sales Manager
CAEN RFID is the leading manufacturer of UHF RFID devices in Italy since 2002. Many End Users around the world are
using CAEN RFID technology for different applications like Fashion & Retail, Waste Management, Access Control, Logistics and Industrial Manufacturing. Hence, CAEN RFID have a good solid position to present the Italian UHF RFID
scenario providing an overview of interesting and huge installations developed by its customers.
The agenda is subject to alterations.
HealthCare Workshop 11.30-14.50 (in Danish)
HealthCare Workshop
Hvilke sporbarhedsteknologier er bedst egnet til hvilke
formål på et hospital? Hvilke standarder er de rigtige,
at basere sine installationer på? Findes der dokumenterede business cases, eller er RFID bare ’hype’? Hvor er
der eksempler på at RFID-teknologien rulles ud, efter
at være blevet afprøvet ?
Teknologier, der kan anvendes til sporing, identifikation og opsamling af data er særdeles interessante for de
danske hospitaler. De massive investeringer i nyt hospitalsbyggeri i Danmark har for alvor bragt RFID i fokus,
som en teknologi, der potentielt kan anvendes til at skabe
overblik og bidrage til de løbende effektiviseringskrav på
hospitalerne. Da vi står over for noget der er meget vigtigt
og som bliver stort for healthcare området i årene fremover er der dog fortsat mange uafklarede spørgsmål i
forhold til løsningerne og deres implementering.
’RFID’ dækker over mange forskellige teknologier, som er
baseret på forskellige internationale standarder, forskellige
frekvenser, og er af forskellig konkret udformning (med/
uden batterier osv.) Det er med andre ord let at tabe overblikket over de mange muligheder og kravene forbundet
med dem, og det medfører et behov for erfaringsudveksling og vidensdeling på området –det vil vi skabe her!
Workshoppen er opdelt i to sessioner;
Del 1:
Hvor langt er man kommet i implementeringen af “it
understøttelse af Lokalisering og emneidentifikation” på
Det Ny Universitets Hospital i Århus, Region Midtjylland
– Gevinster, udfordringer og opdagelser indtil nu.
V/ Henrik Stilling it-arkitekt, Region Midtjylland (eller
Lead Architect – Service Logistik)Status rapportering om
gennemførte aktiviteter og erfaringer fra processen ved
Leverandør teamet bag DNU emnesporbarhed og
identifikation på DNU
V/ Keld Ole Nielsen Lyngsoe systems og Thomas
Toftkjær Systematic
Del 2:
Reference arkitektur for lokalisering og emneidentifikation i sundhedsvæsenet.
Regionerne har i fællesskab udarbejdet en referencearkitektur, et fælles grundlag for lokalisering og
emneidentifikation både internt i og på tværs af regioner.
Referencearkitekturen konsoliderer brugen af en række
globale standarder bl.a. fra GS1. Hvordan anvendes referencearkitekturen og hvad betyder globale standarder for
fremtidens sundhedsvæsen.
V/ Henrik Stilling it-arkitekt, Region Midtjylland (eller
Lead Architect – Service Logistik, Region Midtjylland)
Reference arkitektur for automatisering
Information om denne og mulighederne den giver
sygehusvæsenet i årene fremover
V/ Jesper Kervin Franke, GS1 Denmark
Vi håber at anden del bliver meget interaktiv og at vi vil
have deltagere fra alle regioner og andre relevante organisationer og styrelser – og at de vil blande sig i debatten.
Workshoppen arrangeres af AIM Denmark, GS1 Denmark
og RFID i Danmark.
iBeacons Workshop 13.40-14.50 (in Danish)
iBeacons - det nye sort?
iBeacons giver helt nye muligheder for stedbestemt
kommunikation på smartphones og til lokalisering
af genstande. Teknologien benyttes i dag primært til
mobil markedsføring i detailhandlen, men udbredes
hurtigt til nye områder, fx formidling på museer,
vejvisning i bygninger og optimering af service.
iBeacons kan købes direkte hos producenterne, men tilbydes også i stigende grad som en del af cloud-baserede
IT-platforme.
iBeacons er en afgrænset anvendelse af Bluetooth Low
Energi (BLE) standarden. BLE har mere at byde på end
blot en lokaliseringsteknologi. BLE kan kobles med sensorer, fx temperatur-sensorer, så min/max temperaturen
under en forsendelse kan aflæses fra en standard mobiltelefon.
Denne workshop giver dig indsigt i teknologien bag og
muligheder med iBeacon og viser eksempler på konkrete
løsninger og anvendelsesmuligheder.
Arrangør: Innovationsnetværket InfinIT og Alexandra
Instituttet A/S
Introduktion til iBeacon
iBeacons og hvordan de placere sig i forhold til andre
lokaliseringssteknoloiger
v/Tejs Scharling, InfinIT, Alexandra Instituttet
Brugsmuligheder og hvordan du kommer igang med
iBeacons
v/ Martin Wickings, HeyBuy
Retningsbestemt Beacon, udviklet af RTX
v/ RTX A/S
Andre anvendelser og perspektiver for brugen af iBeacons og dynamic Bluetooth beacons
v/Tejs Scharling, InfinIT, Alexandra Instituttet
Diskussion, erfaringsudveksling og afrunding.
• Netværk og flere aktiviteter.
Ret til ændringer I agendaen forbeholdes
Udvikling skal baseres på standarder
GS1 Standarder er et fælles sprog for unik identifikation, automatiseret
datafangst - fx via RFID - og datadeling. Det fælles sprog skal til for at
understøtte alle anvendelser af RFID fra Business-to-Business til Business-toConsumer.
GS1s standard for RFID hedder Electronic Product Code (EPC). EPC er en unik
produktidentifikation, der indkodes i en RFID-tag, og er baseret på de allerede
eksisterende identifikationsnøgler som fx GTIN, GLN og SSCC.
Hvem er GS1 Denmark?
GS1 er en global not-for-profit organisation, som udvikler standarder,
der effektiviserer forsyningskæder. GS1 Standarderne giver unik
produktidentifikation, automatiseret datafangst (stregkoder/RFID) og
datadeling. Benefits inkluderer gennemsigtighed i forsyningskæden, bedre
sporbarhed og høj datakvalitet.
Hvad kan vi hjælpe jer med? Kontakt os på telefon 39 27 85 27 eller [email protected] eller besøgwww.gs1.dk
InfinIT
The Alexandra
Institute
Innovation network for IT
InfinIT is a Danish network for innovative utilization of IT. Our goal is to convert the infinite possibilities that IT offers into concrete collaborations
between research and industry.
The Alexandra Institute helps public and private
organisations develop innovative, IT-based products
and services based on cutting-edge IT research.
We are a non-profit company with a mission to
create value, growth and welfare in society.
Our team of specialists design novel, innovative
IT-based products and services. We apply our skills
in software, user involvement and innovation
methods to create technological solutions of
commercial relevance with the aim of helping
companies boost their business.
InfinIT invites researchers and enterprises working with process or product innovation with IT
to participate in collaboration projects and the
exchange of knowledge, thus creating a forum
where we can work together to generate exactly
the knowledge that Danish industry and society
needs.
InfinIT are continually involved in cooperations
with various domains e.g. Smart City, Lifestyle,
Internet of Things, Intelligent Buildings,
Wearables, Intelligent Transport Systems etc.
· We help you identify how IT can develop and
support your organisation and business
· We provide knowledge about the latest trends within our areas of expertise
· We develop and optimise software
· We perform reviews of software and architecture
· We provide effectiveness evaluations, benefits realisation analyses and best practice guidance
The Alexandra Institute also bring this knowledge
into play in our consultancy services and our
innovation networks. In this way, we contributes to
improving the innovation processes in organisations and to enhancing their competitive position.
Web: www.alexandra.dk
The tracking & positioning interest group
One of InfinIT’s eight interest groups focus on
developing new services based upon tracking- &
positioning technologies. This group is co-organizer off The RFID i Danmark 2015 Conference.
The membership af InfinIT and the tracking &
positioning interest group is free.
Contact: Tejs Scharling, Lab Manager,
[email protected]
Web: www.infinit.dk
Contact: Ole Lehrmann Madsen, CEO, ole.l.madsen@
alexandra.dk
AIM Denmark
Industry association for suppliers of automatic identification and data mobility
AIM Denmark works to promote the future markets
and technologies for automatic identification and data
mobility to benefit the members of the association.
AIM Denmark is a non-profit organisation and is a
part of the international AIM Global network.
The purpose of AIM Denmark is
- To be the natural community for suppliers of
solutions and products using automatic identifi cation and data mobility.
-
-
-
-
To increase usages of automatic identification and
data mobility.
To give potential users of the technology the reas
surance of the suppliers being a parts of a global professional ethical trade community.
To be the common voice of the industry and by that influence the political scene.
To be the natural contact for the media regarding automatic identification and data mobility.
Web: www.aimdenmark.dk
Contact: [email protected]
RFID i Danmark
Join RFID i Danmark as a member
RFID i Danmark focus on strengthening the opportunities
for exchanging experiences – especially between companies, who has practical experience in the shared fields of
interest. It could be logistics, traceability, production, retail,
health care etc.
Community building today can happen effectively even
though all activity happens on the internet. A great supplement to this is still meeting in person, seminars, company
visits etc. At RFID i Danmark we work with a combination of
virtual and physical networking.
As a member of RFID i Danmark you get access to webinars
and other information for only kr. 300 per year.
If you want to be a member of the more extensive networking activities there are the following options
· For companies with more than 9 employees the annual fee is kr. 6.400 ex. VAT and includes that 2 persons from the company can participate in the networking meetings.
· For companies with less than 10 employees the annual fee is kr. 3.200 ex. VAT and includes that 1 person from the company can participate in the networking meetings.
· For private persons wanting to participate in networking meetings the annual fee is kr. 1.800 ex. VAT.
Your challenges as starting point at
the networking meetings
The members chooses the agenda themselves, hence the
debate is always based on your current challenges. Exchange of experience is the keyword.
The RFID i Danmark secretariat has an extensive experience regarding RFID applications and the technologies put
knowledge and international relations at the disposal of the
group.
Gain:
· Presentation on every meeting from RFID i Danmark about development and experiences – national and inter
national.
· A confidential forum for discussions and exchange of knowledge.
· A possibility to present your own projects and get feed
back from the rest of the group.
· 2-3 meeting pr. year a 3 hours (mostly 13-16) visiting members of the group.
· Networking dinner associated with the yearly RFID i Dan
mark conference.
RFID i Danmark will take care of the practical matter. So all
you have to do is concentrate on your outcome.
Join RFID i Danmark by doing one of the following
Send an e-mail to [email protected] with your name, company, e-mail, address, phone number and which of the four
options above you want. Then we will contact you.
Or visit our website at www.rfididk.org/363-2/ and register
by filling out the form. Then we will contact you.
If you have any other questions don’t hesitate to contact
Henrik Granau at 21 823 835 or visit us at our exhibition
stand at the conference.
OBID i-scan®
OBID i-scan®
Blade Handheld Reader
Wireless HF handheld reader for inventory processes in
libraries, laundries and logistical applications.
ID ISC.PRH200 offers
t
t
t
t
Powerful “Boost Mode” up to 4W
Seamless work integration
Long operating times (up to 16h)
Integrated antenna & WLAN module
ID ISC.PRH200
OBID® – RFID by FEIG ELECTRONIC
FEIG ELECTRONIC GmbH · Lange Straße 4 · D-35781 Weilburg
Phone.: +49 6471 3109-0 · Fax: -99 · E-mail: [email protected] · www.feig.de
3448_AZ_iscan_PRH200_173x247_en_RZ_th.indd 1
13.05.14 14:19
mark
Organizers:
Main sponsor:
Denmark
Granau IT
Platin sponsor:
Premium sponsor:
Granau IT
Sponsors:
Denmark
Denmark
Exhibitors:
Denmark
Granau IT
Denmark
IT-Universitetet
secure open