MA5600 Multi-Service Access Module Operation and Maintenance ISSUE

MA5600 Multi-Service Access
Module Operation and
Maintenance
ISSUE 1.0
Fixed Network Curriculum
Development Section
Objectives
Upon completion of this course, you will be able to:

Grasp the basic knowledge of command line

Grasp the basic system configuration

Grasp the basic service and function
configuration
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Command Line Basis
return
Login via
serial port
or TELNET
quit
Ordinary user
mode
enable
MA5600>
disable
Privilege
user mode
MA5600 #
Configure
quit
Global
configuration mode
MA5600(config)#
ospf
OSPF mode
MA5600(config-ospf)#
rip
RIP mode
MA5600(config-rip)#
interface
interface configuration mode
MA5600(config-if-…)#
BTV
test
BTV mode
MA5600(config-btv)#
TEST mode
MA5600(config-test)#
diagnose
Diagnose mode
MA5600 command line mode
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
MA5600(config-diagnose)#
Command Line Basis
Command line help

By entering “?” ,
you can get list of commands with a brief
description under any command mode
MA5600#display?
Key word matching
MA5600#conf<space> ---- MA5600#configure
Chinese/English language switching
MA5600#Switch language mode
Access history commands

Access the previous history command: "Ctrl +P"

Access the next history command: "Ctrl +N"
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Setting up Configuration Environment
MA5600 control console provides two configuration modes:

Setting up local configuration environment via the Console
Local maintenance

Setting up configuration environment via Telnet
Local and remote maintenance

In-band Telnet: Occupying service channels

Out-band Telnet: Occupying no service channel
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Setting up Configuration Environment
Setting up a local configuration environment via the Console

Connect the computer serial port with the MA5300 Console via a
standard RS232 serial cable, then configure hyper terminal in
Windows or other operation systems.
ADEF
CON
ETH
MON
SCU
RS232 serial port cable
PC
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
MA5600
Setting up Configuration Environment

Open the hyper terminal

Open-Program-Accessories-
Communications-Hyper terminal: Double click

Hypertrm. exe
Setting the HyperTerminal parameters

Enter the name:
MA5600(The name can be defined by
the user)

Connection use:
Directly connect to Serial port 1
(depending on actual conditions)

Port setting:
9600bit/s, 8 data bits, no parity check
1 suspension bit, no flow control

Terminal type:
Confidential Information of Huawei.
No Spreading without Permission.
VT100 or automatic test
Security Level: Internal
Setting up Configuration Environment
Setting up Configuration Environment via Telnet
ADEF
CON
ETH
MON
workstation
LAN
SCU
MA5600
ETH
server
workstation
Telnet Terminal
LAN local Telnet mode
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Setting up Configuration Environment
workstation
Local router
LAN
WAN
ADEF
Telnet terminal
CON
ETH
MON
SCU
MA5600
LAN
WAN remote Telnet configuration mode
Remote router
workstation
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Setting up Configuration Environment
User login

Via the Console
After correctly connecting the hyper terminal, press Enter key
according to the prompt to enter the configuration environment

Via Telnet
According to the prompt, enter correct user name and password to
enter the configuration environment
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations
Out-band NM configuration

MA5300(config)#interface meth 0
Enter the external network interface port mode.

MA5300(config-if-meth0)#ip address 10.71.53.2
255.255.255.0
Configure the IP address of the external network interface

MA5300(config-if-meth0)#undo shutdown
Activate the external network interface
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
In-band NM Configuration Example
Upstream
0
A
S
D
M
E
F
0
B
FE0/7/0
7
7
SCU
MA5600
HAB
Port
MA5200
HRB
ethernet 0/7/0 on the MA5600’s SCU board is connected to port 0
on the MA5200’s HAB board.
The IP address of the MA5600 inband NMS is 10.10.20.2/24. The
NMS VLAN ID is 1000.
The IP address of the NMS is 10.10.21.1/24
The IP address of the MA5200’s VT interface is 10.10.20.254/24.
The IP address of port 0 of the MA5200 HRB board is 10.10.40.1/30.
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations
In-band NM configuration

MA5600(config)#vlan 1000 mux
Add NM VLAN

MA5600(config)#interface vlan-if 1000
Enter the Vlan-interface 1000 configuration mode .

MA5600(config-if-vlanif1000)#ip address 10.10.20.2
255.255.255.0
Configure the equipment with a management address, which should
be configured on vlan virtual interface 1000 .

MA5600(config)#port vlan 1000 0/7 0
Add the upstream port
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations
SNMP network management configuration

MA5600(config)# snmp-agent community read public

MA5600(config)# snmp-agent community write private
Set the community name and access authority

MA5600(config)# snmp-agent trap enable
Enable sending Trap
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations

MA5600(config)#snmp-agent
target-host
trap
address
10.10.21.1 securityname private
Set Trap destination address.

MA5600(config)#snmp-agent trap source vlanif 1000
Specify IP address of the inband NMS as the Trap source address.

MA5600(config)#route-static 10.10.41.1 30 10.10.20.254
Configure the equipment with a static route.

MA5600(config)#save
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations
Operation terminal configuration

Adding a User
MA5600#terminal user name

Deleting a User
MA5600#undo terminal user name

Modifying user level
MA5600#terminal user level

Modifying user password
MA5600#terminal user password

Modifying number re-entries
MA5600#terminal user reenter

Viewing User Information
MA5600#display terminal user
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations
Board Management

Query a Board
MA5600#display board 0
MA5600#display board 0/2

Add a board(ADEF)
MA5600(config)#board add 0/1 ADE

Confirm a Board
MA5600(config)#board confirm 0

Delete a board
MA5600(config)#board delete 0/2

Reset a Board
MA5600(config)#board reset 0/1
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations
Equipment management

Reset the system
MA5600(config)#reboot system

Show CPU Occupancy Ratio MA5600>display cpu 0/7

Display the system time

Set the system time
MA5600> display time
MA5600#time HH:MM:SS YYYY/MM/DD

Display the system version

Setting hostname
MA5600(config)#display version 0/7
MA5600(config)#sysname MA5600
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
System Management Configuration
Configure File Management

Query the initial configuration of the MA5300 intelligent IP integrated
access equipment
MA5600#display saved-configuration

Query the current configuration of the MA5300 intelligent IP
integrated access equipment
MA5600#display current-configuration

query the configuration commands of fault restoration.
MA5600#display unresumed-configuration

Save the current configuration
MA5600#save

Erase the configuration files in the Flash
MA5600#erase
flash data
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
ADSL Port Configuration

To set the VPI/VCI of a port, run the command service-port.
MA5600(config)#service-port vlan 2 adsl 0/2/1 vpi 0 vci 35 rxcttr 0 tx-cttr 0

To add multiple virtual ports to a VLAN at a time, run the
command multi-service-port.
MA5600(config)#multi-service-port 3 adsl 0/2 3-10 rx-cttr 0 txcttr 0
(vlan-id 3, board 0/2 ,port range 3/10 )

Unblocking Adsl port
MA5600(config-if-adsl-0/2)#undo block all
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
ADSL Port Configuration
CON
ADEF SPLT
ETH
MON
SCU
MA5600
MODEM
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
PC
ADSL Port Configuration

Entering ADSL board configuration mode
MA5600(config)#interface adsl 0/5

Add an ADSL2+ line profile
MA5600(config)#adsl line-profile add huawei…

Activate port 0 on the ADSL board with line-profile above:
MA5600(config-if-adsl-0/5)#activate 0 huawei

Resetting ADSL Chipset
MA5300(config-if-adsl-0/2)#chipset reset 1
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
ADSL Port Configuration

Through the bit allocation information, you can get to know the
number of bits carried by every ADSL2+ tone (totally 512
tones), and analyze the performance of the line.
MA5600(config-if-adsl-0/2)#display line bit-allocation 61
Upstream bits per frame: 312
Downstream bits per frame: 5616
0 0
……
6 6 ******
7 9 *********
8 10 **********
Confidential Information of Huawei.
No Spreading without Permission.
9
10
11
12
13
11
12
12
13
14
***********
************
************
*************
**************
Security Level: Internal
14 14 **************
15 14 **************
……
31 6 ******
……
ADSL Port Configuration

Adding an ADSL Line Alarm Profile
MA5600(config)#adsl alarm-profile add 3
(Refer to operation manual to see more detail)

Bind alarm profile 1 with all ports of the ADSL2+ board
residing in slot 10.
MA5600(config-if-adsl-0/10)#alarm-config all 1

Deleting an ADSL Line Alarm Profile

MA5600(config)#adsl alarm-profile delete 3

Querying ADSL line alarm profile information
MA5600(config)#display adsl alarm-profile 3
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
ADSL Port Configuration

Querying ADSL Port Information
MA5600(config)#display service-port port 0/10/1

Viewing line parameters of a port
MA5600(config-if-adsl-0/2)#display parameter 2

view the statistics collected on an ADSL2+ port within the past
15 minutes or 24 hours, or all available performance statistics.
MA5600(config-if-adsl-0/2)#display statistics performance 61
historic-15minutes 1
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
SHDSL Port Configuration
CON
SHEA
ETH
MON
SCU
MA5600
MODEM
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
SHDSL Port Configuration

Add an SHDSL line profile, and number it as 3
MA5600(config)#shdsl line-profile add 3

When operating in blocked state, an SHDSL port cannot
transmit data, and any operation on the port is prohibited. To
operate the port, you need to unblock the port first.
MA5600(config-if-shdsl-0/1)#undo block all

Activate all ports on the board residing in slot 4 using profile 3.
MA5600(config-if-shl-0/3)# activate all 3
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
SHDSL Port Configuration

Adding an SHDSL Line Alarm Profile
MA5600(config)#shdsl alarm-profile add 2

Bind alarm profile 2 with all ports of the SHDSL board residing
in slot 3.
MA5600(config-if-shdsl-0/3)#alarm-config all 2

Deleting an SHDSL Line Alarm Profile

MA5600(config)#shdsl alarm-profile delete 2

Querying SHDSL line alarm profile information
MA5600(config)#display shdsl alarm-profile 2
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
SHDSL Port Configuration

view the brief information on a port
MA5600(config-if-shl-0/3)#display port state 0
-------------------------------------------------------------------Port Running Control Line
ID Status
Alarm Running
Config
Bind
Status Profile Profile Operation Operation Status
-------------------------------------------------------------------0 Activating Active
1
1
Normal
None
Normal
-------------------------------------------------------------------MA5600(config-if-shl-0/3)#display line state 2
MA5600(config-if-shl-0/3)#display statistics performance 2 current
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Ethernet Port Configuration

Set duplex mode of an Ethernet port
MA5600(config-if-scu-0/7)#duplex all full

Set the bit rate of an Ethernet port
MA5600(config-if-scu-0/7)#speed all 1000m

Set an Ethernet port’s network cable type
MA5600(config-if-scu-0/7)#mdi all auto
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Ethernet Port Configuration

Enable/Disable a Port’s Traffic Control Function
MA5600(config-if-scu-0/7)#flow-control all

Enable/Disable Traffic Suppression
MA5600(config-if-scu-0/7)#traffic-suppress all broadcast value 1

Configure a Port's MAC Address Learning Attribute
MA5600(config)#mac-address max-mac-count adsl 0/10/1 vpi 0
vci 35 10
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Ethernet Port Configuration

Enable/Disable Port Aggregation
MA5600(config-if-scu-0/7)#link-aggregation 0-1 ingress
MA5600(config-if-scu-0/7)#display link-aggregation
----------------------------------------------Master port Sub-ports
Mode
----------------------------------------------0
1
ingress
-----------------------------------------------
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Ethernet Port Configuration

View the configuration of an Ethernet port
MA5600(config-if-scu-0/7)#display port state all
-------------------------------------------------------------------Port Port Optic Native MDI Speed Duplex Flow- Active Link
Type Status VLAN
(Mbps)
Control State
-------------------------------------------------------------------0 GE absence
1
-
1000
full
on
active offline
1 GE absence
1
-
1000
full
on
active offline
--------------------------------------------------------------------
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
VLAN Service Configuration

The MA5600 supports diverse VLAN applications, including:
Standard VLAN
Smart VLAN
MUX VLAN
Super VLAN
QinQ VLAN
Stacking VLAN
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Standard VLAN Configuration Example
IP network
To establish the above connections,
do as follows:
Add VLAN 9
A
D
Run the command port vlan on
E
F
MA5600_A
to
add
a
port
0/7/0
0/7/1
on
MA5600_B and a port on MA5600_A
SCU
MA5600-A
A
D
E
to a standard VLAN.
F
0/7/0
0/7/1
MA5600-B
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
SCU
Standard VLAN Configuration

Standard VLAN configuration involves:
1.Creating/Deleting a standard VLAN
MA5600(config)#vlan 9 standard
2.Adding/Deleting a port to/from a standard VLAN
MA5600(config)#port vlan 9
{ frame/slot<S><3,4>|to<K> }:0/7
{ portlist<S><1,256> }:0
MA5600(config)#port vlan 9
{ frame/slot<S><3,4>|to<K> }:0/7
{ portlist<S><1,256> }:1
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Standard VLAN ServiceConfiguration
3.Displaying the information on a standard VLAN
MA5600(config)#display vlan 9
VLAN ID: 9
VLAN attribute: standard
Standard port number: 2
-------------------------F/ S/ P
State
-------------------------0/ 7/ 0
down
0/ 7/ 1
down
-------------------------Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Smart VLAN Service Configuration

The Smart VLAN configuration
Upper
involves:
network
1.Adding/Deleting a Smart VLAN
2.Adding/Deleting a port to/from
a Smart VLAN
Smart VLAN
ADEF
ADEF
3.Displaying the information on a
CON
ETH
MON
ADSL link configuration
MA5600
User
User
User…………………...User
vlan 20
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Smart VLAN Service Configuration

Create a Smart VLAN.
MA5600(config)#vlan
{ smart<K>|vlanid<U><1,4000> |attrib<K>}:20
{vlantype<E><mux,standard,smart,super>|to<K> }:smart

Add the upstream port
MA5600(config)#port vlan 20 0/7 0

Configure multicast PVCs.
MA5600(config)#vlan smart 20
{ vpi<K> }:vpi 0 vci 35
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Smart VLAN Service Configuration

Add port 1 on the ADSL board residing in slot 0/12 to VLAN 20.
MA5600(config)#service-port vlan 20 adsl 0/12/1 vpi 0 vci 35
rx-cttr 2

Add port 0-31on the ADSL board residing in slot 0/0 to VLAN
20
MA5600(config)# multi-service-port vlan 20 adsl 0/0 0-31 rxcttr 2 tx-cttr 2
After the above configuration, the PCs can visit Internet but
can not ping each other.
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
MUX VLAN Configuration

The MUX VLAN configuration involves:
1.Creating/Deleting a MUX VLAN
2.Adding/Deleting a port to/from a MUX VLAN
3.Displaying the information on a MUX VLAN
ADSL link configuration
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
MUX VLAN Configuration

Create a MUX VLAN.
MA5600(config)#vlan
{ smart<K>|vlanid<U><1,4000> }:10
{ mux<K>|standard<K>|smart<K>|to<K> }:mux

Add upstream port
MA5600(config)#port vlan 10 0/7 0

Add/Delete a service port to/from a MUX VLAN
MA5600(config)# service-port vlan 10 adsl 0/1/0 vpi 0 rx-cttr 0
tx-cttr 0
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
MUX VLAN Configuration

Add Multiple Ports to Different MUX VLAN

Add all ADSL and SHDSL ports to MUX VLANs, with the first
port corresponding to VLAN 2.
MA5600(config)#multi-service-port from-vlan 2 board 0-15 vpi
0 vci 35 rx-cttr 2 tx-cttr 2
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal