Microlitre Centrifuges Z 216 M Z 216 MK 44 x 2.0 ml Z 216 M Z 216 MK The Z 216 M and Z 216 MK are setting new standards in this centrifuge class. Capable of centrifuging up to 44 x 1,5 / 2,0 ml at each run. Due to their compact design and quiet running properties they are fitting perfectly in their working area. The powerful refrigeration system of Z 216 MK keeps samples at temperatures as low as 4°C during a continuous run at 20000 xg. Technical Data max. Speed: max. RCF: max. volume: Speed range: Temperature range Z 216 MK: Running time: 15000 min-1 21380 xg 44 x 1,5 / 2,0 ml 200 - 15000 min-1 -20°C to 40°C 59 min 50 s / 10 s increments 99 h 59 min 50 s / 1 min increments Dimensions: Z 216 M: Z 216 MK: 28 cm x 29 cm x 39 cm 28 cm x 29 cm x 55 cm Weight: Z 216 M: Z 216 MK: 17 kg 35 kg Power input: Z 216 M: Z 216 MK: 280 W 560 W (W x H x D) (W x H x D) Order numbers: Z 216 M: 325.00 V01 - Z 216 M, 230 V / 50 - 60 Hz 325.00 V02 - Z 216 M, 120 V / 50 - 60 Hz Z 216 MK: 305.00 V05 - Z 216 MK, 230 V / 50 - 60 Hz 305.00 V06 - Z 216 MK, 120 V / 50 - 60 Hz Specifications Maintenance-free induction drive Micropocessor with large LCD display Motor driven lid lock Active imbalance identification and cut off Standstill cooling Audible signal at the end of each run CFC-free refrigeration system Rapid acceleration and deceleration (see rotor data) Distinct Control Panel Simple one handed operation Easy to program with gloves on Foil keyboard Permanent indication of preset and actual values Selection of speed in both rpm and g-force, with increments of 10 Quick-key for short runs Lowest sample temperature 4°C at 20000 xg 10 acceleration and deceleration rates, possibility of unbraked deceleration Noise level < 60 dBA at 21380 xg Storage of up to 99 runs including rotor Extremely compact with a space saving footprint Temperature range from -20°C to +40°C Quick acces to samples with a snap on lid Input and indication of temperature either in °C or °F Manufactured according to international safety regulations, i. e. IEC 61010 Pre-cooling program (Pre-cooling time from room temperature to +4°C < 10 min) Pre-selection of the running time from 10 s to 99 h 59 min or continuous Accessories Z 216 M and Z 216 MK Rotor/Buckets Adapter Order No.: 220.87 V14 Acceleration in s: 21/152 Deceleration in s: 18/173 max. speed: 15000 min-1 RCF: 21380 xg max. radius: 8,5 cm max. ø: 11 mm Temp. at max. speed: 6°C Order No.: Acceleration in s: 21/151 Deceleration in s: 21/217 max. speed: 15000 min-1 RCF: 21380 xg max. radius: 8,5 cm max. ø: 11 mm Temp. at max. speed: 4°C Order No.: Acceleration in s: 29/235 Deceleration in s: 27/258 max. speed: 13500 min-1 RCF: 19153 xg max. radius: 9,4 cm max. ø: 11 mm Temp. at max. speed: 7°C Order No.: Acceleration in s: 18/136 Deceleration in s: 17/133 max. speed: 13500 min-1 RCF: 17722 / 14463 xg max. radius: 8,7 / 7,1 cm max. ø: 11 mm Temp. at max. speed: 7°C Order No.: Acceleration in s: 16/136 Deceleration in s: 17/180 max. speed: 13500 min-1 RCF: 16708 / 14263 xg max. radius: 8,7 / 7,1 cm max. ø: 8 mm Temp. at max. speed: 6°C Order No.: Acceleration in s: 24/148 Deceleration in s: 17/320 max. speed: 14500 min-1 RCF: 19974 xg max. radius: 8,5 cm max. ø: 1,7 mm Temp. at max. speed: 4°C Order No.: 701.015 Angle rotor 24 x 1,5/2,0 ml Angle: 45° Order No.: 220.87 V13 Angle rotor 24 x 1,5/2,0 ml Angle: 45° Order No.: 221.17 V06 Angle rotor 30 x 1,5/2,0 ml Angle: 45° Order No.: 220.88 V08 Angle rotor 44 x 1,5/2,0 ml Angle: 40° Order No.: 220.92 V07 Angle rotor 64 x 0,5 ml Angle: 40° Order No.: 221.35 V03 Angle rotor 12 x 5 ml Reaction tubes Angle: 45°C Order No.: 221.38 V03 Angle rotor 4 x 8-PCR Strips Angle: 45°C Order No.: 220.58 V13 Just for 216 M Hematocrit rotor 24 x capillaries Angle: 90° Acceleration in s: 17/150 Deceleration in s: 20/95 max. speed: 15000 min-1 RCF: 15342 xg max. radius: 6,1 cm max. ø: 6 mm Temp. at max. speed: 2,5°C Acceleration in s: 15/120 Deceleration in s: 15/120 max. speed: 12000 min-1 RCF: 14968 xg max. radius: 9,3 cm without without 704.005 704.004 without without 704.005 704.004 without without 704.005 704.004 without without 704.005 704.004 without 701.016 701.017 Tube rack 1 x 2,0 ml 1 x 1,5 ml 1 x 0,5 ml 1 x 0,4/0,2 ml PCR ø (mm) 11 11 8 6 Length (min./max.) 40 40 45 45 Tube rack 1 x 2,0 ml 1 x 1,5 ml 1 x 0,5 ml 1 x 0,4/0,2 ml PCR ø (mm) 11 11 8 6 Length (min./max.) 40 40 45 45 Tube rack 1 x 2,0 ml 1 x 1,5 ml 1 x 0,5 ml 1 x 0,4/0,2 ml PCR ø (mm) 11 11 8 6 Length (min./max.) 40 40 45 45 Tube rack 1 x 2,0 ml 1 x 1,5 ml 1 x 0,5 ml 1 x 0,4/0,2 ml PCR ø (mm) 11 11 8 6 Length (min./max.) 40 40 45 45 Tube rack 1 x 0,5 ml ø (mm) 8 Length (min./max.) 45 1,5 - 2 ml reaction tubes (ø 11 x 42 mm) set of adapters (6 pcs.) 1,0 ml Cryo tubes (ø 12,6 x 41 mm) set of adapters ( 6 pcs.) 1,8 ml Cryo tubes (ø 12,6 x 48 mm) set of adapters (6 pcs.) More Microlitre Models Mini Centrifuge Unique KOMBI-rotor for tubes and strips Twice the capacity of traditional mini centrifuge Starts and stops with closing/opening of the lid Compact, low profile and design Short acceleration and deceleration times Technical Data max. speed: max. RCF: max. noise level: Z 130 M 5500 min-1 2000 xg 52 dBA Dimensions: Weight: 14 x 11,2 x 20 cm (w x h x d) 1,3 kg Order numbers: 324.00 V01 - Z 130 M, 230 V / 50-60 Hz / 40 W 324.00 V02 - Z 130 M, 120 V / 50-60 Hz / 40 W Aircooleed Microcentrifuge Brushless motor Electrical lid lock Speed regulation 1000 - 14000 rpm Time regulation 1 - 30 min in increments of 1 min or cont. „Quick“-key for short runs Technical Data max. speed: max. RCF: max. noise level: Z 160 M 14000 min-1 15996 xg 57 dBA Dimensions: Weight: 20 x 18 x 22 cm (w x h x d) 4,5 kg Order numbers: 290.00 P01 - Z 160 M, 230 V / 50 - 60 Hz / 120 W | cpl. with 18 x 1,5/2,0 ml rotor 290.00 P02 - Z 160 M, 120 V / 50 - 60 Hz / 120 W | cpl. with 18 x 1,5/2,0 ml rotor More from Hermle Universal Centrifuge Z 306
© Copyright 2024