Smart, Simple, PROVEN! “POND LOOP IN A PACKAGE” The ORIGINAL

Smart, Simple,
PROVEN!
The ORIGINAL
“POND LOOP IN A PACKAGE”
Unmatched In Performance & Quality
The Original
“POND LOOP IN A PACKAGE”
Compact, Pre-Sized & Assembled
• 
• 
• 
Proven Design
Proven Pressure Drops
Proven Performance
What is a Slim Jim® / Geo Lake Plate® ?
A simple, labor-friendly alternative to polyethylene pipe
(lake loops) for fluid to fluid heat transfer in any watercooled equipment when a body of water can be utilized
(ponds/lakes, rivers, oceans, waste water retention ponds,
waste water treatment plants, etc.).
• 
• 
• 
• 
Easy to install (labor friendly)
Easy to flush
No limit to job size - single to multiple units
Available in 304 SS – Slim Jim®, 316L SS &
Titanium – Geo Lake Plate®.
•  Third Party Tested by Ewbank & Associates
Must stand vertical
and be supported off the bottom –
out of silt or mud
and, the body of water
must be adequate to
handle the load!
Size Does Matter!
We Need Input!
Slim Jim® / Geo Lake Plate®
PROJECT INFORMATION SHEET Sheet Notes:
(*) Required Information
Text fields will expand to allow for complete information to be entered
Use your “Tab” key or Mouse to move between fields
Highlighted field with a “ ” on the right side of the field indicates selectable text
When the sheet is complete save and include requested information before sending by email or fax to AWEB Supply
*Date:
Section 1 - General Information
* Project name:
Company name:
Address:
*Contact name:
Phone No.:
ext.:
, *Location:
, City:
, State:
Zip:
-
, *email:
Fax No.:
Section 2 – Design Heat Gain/Loss Calculation for Project
*Total design peak heat gain (cooling):
Btu/hr
*Total design peak heat loss (heating):
Btu/hr
*Residential (Climate Driven Loads) No , Yes or Commercial (Internally Driven Loads) No
*Copy attached
, Yes
Section 3 - Equipment Information – Heat Pump(s) or Chiller(s)
*Manufacturer(s):
, *Heat Pump or Chiller Model number(s):
*Total tonnage of equipment:
, Total number of units:
Water-2-Water , Water-2-Air , Other
*Equipment Performance Submittal Sheet(s) Attached
*Project Heat Pump/Chiller Equipment Schedule Sheet(s) Attached
Section 4 – Project Total Source Loop Requirements
*Loop liquid type: Water , Methanol
*Source Loop total flow rate:
GPM
%, Prop. Glycol
%, Eth. Glycol
%
Section 5 – Total Cooling Requirement (Heat of Rejection (HR))
*Heat Pump(s)/Chiller(s) equipment design (HR) source flow rate
GPM (Per Manufacture(s) Equipment Performance Sheet)
*Total Heat of Rejection (HR) for project at 90ºF (EWT)
Btu/hr (Per Manufacture(s) Equipment Performance Sheet)
*Warmest Pond/Lake temperature at planned installation depth:
ºF
*Equipment(s) (HR) Performance Submittal Sheet(s) Attached
Section 6 – Total Heating Requirement (Heat of Extraction/Adsorption (HE))
*Heat Pump(s)/Reversible Chiller(s) equipment design (HE) source flow rate
GPM (Per Manufacture(s) Equipment Performance Sheet)
*Total Heat of Extraction (HE) for project at 30ºF (EWT)
Btu/hr (Per Manufacture(s) Equipment Performance Sheet)
*Coldest Pond/Lake source temperature at planned installation depth:
ºF
*Equipment(s) HE Performance Submittal Sheet Attached
Section 7 - Pond/Lake/River/Ocean Information
Length:
ft, Width:
ft or Surface area:
ft²
*Planned Installation depth:
ft, Average depth:
ft, Deepest depth:
*Will the surface water form ice in the winter: No , Yes
Thickness
ft
Water type: Freshwater , Saltwater , Fresh/Saltwater , Other
Is the installation body of water flow/moving: No , Yes
ft
AWEB Supply
7350 Tom Drive, Baton Rouge, LA 70806
225/928-2630 ● 888-277-2932 ● Fax 225-928-2087
Email: [email protected] ● website: www.awebgeo.com
Rev:11/2012 Slim Jim® makes installation of GeoExchange
in Ponds or Bodies of Water as
Simple as it gets!
5 Tons(HR)
SJ-05T
Little Fusion Required
…or No Fusion
Single Plate Application
4 Tons(HR)
SJ-04T
Economical
Stabilizer and Legs –
PVC Pipe
Single Plate Installation
SJ-05T
5 Tons(HR) –
SJ SS Legs (Optional)
Multiple plates of like capacity can be
manifold in field with PE pipe to
accommodate Shallow Pond Applications
6 Tons(HR)
3 @ SJ-2T plates
Multiple plates of like capacity can be manifold
in field with PE pipe to accommodate Larger Loads
32 Ton (HR)
4 @ SJ-08T Plates
16 Ton (HR)
2 @ SJ-08T Plates
16 Ton(HR)
No Manifold
2 @ SJ-08T Plates
24 Tons (HR) Total –
3 @ 8-Ton(HR) Circuits
6 @ SJ-04T Plates
Or, AWEB can custom build
assemblies with frame on skids,
manifolds and flange connections
24 Ton(HR)
3 @ SJ-08T
Plates
2” Manifolds
2” Flange
Connections
4 Tons (HR)
2 @ SJ-02T Plates
Pipe Thread
Connections
6 Tons(HR)
3 @ SJ-2T Plates
Low Profile –
Shallow Pond
16 Ton(HR)
2 @ SJ-08T Plates
30 Tons(HR)
6 @ SJ-05TC (Low Profile)
40 Tons(HR)
4 @ SJ-10T Plates
40 Tons(HR) Total
Two 20-Ton(HR) Circuits
4 @ SJ-10T
Plates
50 Tons(HR)
5 @ SJ-10T Plates –
Special Manifold
50 Ton(HR)
5 @ SJ-10T Plates – Special Manifold
60 Tons(HR) Total
Geo Lake Plate® - Titanium
6 @ GLP-05TC (Titanium) Plates per Assembly
70 Tons (HR)
7 @ SJ-10T Plates
70 Tons(HR)
14 @ SJ-05TC Plates - Extended Legs
80 Ton(HR)
10 @ SJ-08T Plates
110 Ton(HR)
11 @ SJ-10T Plates
120 Tons(HR) Total
3 @ 40 Tons(HR)
120 Tons(HR) Total
Each Assembly – 8 @ 10T Plates
200 Ton(HR) w/Deflector
River Application – 20 @ SJ-10 Plates
Versatility!
Two SJ-02T plates anchored
to a floating home
Versatility for Space Limitations!
Low Profile – 15 Ton(HR)
Geo Lake Plate® - Titanium
for Salt Water Applications
Aquarium Project
BC, Canada
15 Tons(HR)
River Application
3 @ SJ-05TC Plates
Special Manifold
Deflector
15 Tons(HR)
River Application Installation
32 Ton(HR) Total
Two 16 Ton(HR) Circuits
Marine Safety Station –
Chicago, IL
96 Ton(HR) - Wisconsin
Pine Haven Christian Home
Wisconsin
160 Tons(HR)
Two 80 Ton(HR) Slim Jim® Assemblies - OHIO
200 Ton(HR)
Picture Perfect Cooling Tower
Three Pillars Assisted Living Facility – Wisconsin – 200 Ton (HR)
Single SJ-05T Slim Jim®
Quebec, Canada
SJ-05T Slim Jim® piped up - Legs
being attached for installation
Slim Jim® plate floated out to installation site
Slim Jim® plate in position to be submerged
Floating Home Application
British Columbia, Canada
Two SJ-02T (304SS) plates
mounted directly to the
concrete float and piped into
the mechanical room. The top
of the plates are 16" below the
water surface.
Home being floated to new home site
Floating home being launched
Home Site - New Westminster, British Columbia, Canada on the Fraser River
40 Ton(HR) Installation
Baton Rouge, LA
Dewey Short Visitor Center
Table Rock Lake, Missouri
110 Tons(HR)
11 @ SJ-10T Plates – Oshkosh, WI
110 Ton (HR) Slim Jim®
Heat Exchanger - Ready
for Shipment
Piped Up and
Ready for Water
– Front View
Piped Up and
Ready for Water
– Side View
Full View
David Crockett State Park
120 Tons(HR) Total
Two 60 Ton(HR) Slim Jim®
exchangers are installed at
David Crockett State Park
Exchangers being moved to
installation site
Connecting the HDPE pipe to the
Slim Jim® exchangers
Slim Jim® exchanger being
moved to installation site
Lowering the SJ exchanger into the
water. Stabilizers (PVC pipe capped on
ends) allow the unit to float at the
surface for positioning before flushing
Flushing has begun - the exchangers
descend to the bottom as they are filled with
water. The stabilizer is not removed after
flushing is complete.
Installation Complete!
Forks Market Project
Winnipeg, Manitoba Canada –
400 Tons(HR) Total Project
1400 Tons(HR)
7 @ 200 Ton(HR) Slim Jim®
Assemblies Installed
Slim Jim® Assembly
floated out to installation site
Illustration of Installed
Slim Jim® Assembly
Kings Mill Hospital Project
Kings Mill Hospital –
Mansfield England
Just Add Water!
Eden Meadows (Lutheran Homes of Oshkosh),
Oshkosh, Wisconsin – 110 Ton(HR) – Completed Project
Thank You