2015: MicroNanoMoulding - 18-06-2015 Scandic Odense Actura Nanotech ApS Michael Døssing, Technical Director ATV-SEMAPP Ulla Knudsen, Sekretariatsleder Danfoss A/S Arnim Saalbrink, Lead consultant DTU Elektro Aminul Islam, Associate Professor DTU Mechanical Engineering Maximillian Marhöfer, Ph.D. Student Timo Wöhner, Ph.D. Student DTU Nanotech Marco Matteucci, Post Doc Anders Wolff, Associate Professor Ernst Wittner GmbH Ernst Wittner, CEO Fluimedix Reza Nikbakht, Project Manager Formatec Ceramics Giel Ulijn, Sales Engineer GN ReSound A/S Finn Hansen, Senior Mechanical Design Engineer Allan Møller Kristensen, Sr. Design Engineer InMold Biosystems Guggi Kofod, CEO Knudsen Plast A/S Per Garbos, Projektleder Lego System A/S Mads Diemer, Senior Engineer Claus Fogh Hansen, Senior Lead Engineer Michael Lundbech A/S Michael Lundbeck, Direktør Jens-Erik Otte, Plastingeniør Nil Technology ApS Theodor Nielsen, CEO and founder Novo Nordisk A/S Bjørn Gullak Larsen, R&D Engineer Jørgen Pedersen, Procesingeniør Ortofon A/S René Elsborg, Factory Manager 1 af 2 Oticon A/S Preben Ottosen, Project Manager, NPI Plastics Radiometer Medical ApS Ebbe Helt Poulsen, R&D Engineer Torben Rydal, Mechanical Engineer Henrik Siiger, Maskiningeniør RHP-Technology GmbH, Powder Shaping Technologies Thomas Wilfinger, Graduate engineer Sarix SA Angelo Quardroni, CEO Solgaard Udvikling Kurt Solgaard, Consultant Sonion A/S Anders Larsen, Mechanical Engineer Tobias Teilman, Product Development Engineer Swansea University Peter Blaabjerg, B.Sc. Student Ultrasion SL Xavier Plantá, VP&CTO Enric Sireira, Sales & Vice Managing Director University of Bradford Ben Whiteside, Director Polymer Micro and Nano Centre Widex A/S Tina Ahlberg, Mechanical Engineer Wittmann Battenfeld ApS Michael Juul-Andersen, Sales Manager Martin Philipp-Pichler, Product Manager 19. juni 2015 39 deltagere 2 af 2
© Copyright 2024