The Allied Telesis x610 Series is the high performing and... solution for today’s networks, providing an extensive range of

Switches
PRODUCT INFORMATION
x610 Series
LAYER 3+ NETWORK SWITCHES
The Allied Telesis x610 Series is the high performing and scalable
solution for today’s networks, providing an extensive range of
port-density and uplink-connectivity options.
With a choice of 24-port and 48-port
versions and optional 10 Gigabit uplinks,
plus the ability to stack up to eight units,
the x610 Series can connect anything
from a small workgroup to a large
business.
High Performing
The x610 Series features fully nonblocking switching on all ports, so IPv4
and IPv6 Layer 2 switching and Layer 3
routing occur at wirespeed with low
latency. This is ideal for high-end server
deployments, and, when combined
with a large Layer 3 route table, for
aggregating Gigabit connections.
Powerful Network Management
Meeting the increased management
requirements of modern converged
networks, Allied Telesis Management
Framework (AMF) automates many
everyday tasks including configuration
management. The complete network
can be managed as a single virtual device
with powerful centralized management
features. Growing the network can
be accomplished with plug-and-play
simplicity, and network node recovery is
fully zero-touch.
Resilient
The x610 Series provides uninterrupted
access to online applications by
implementing a network with no single
point of failure. Distributing resources
across a stacked group of units means
no network downtime. A fully resilient
solution is created with VCStack™
(Virtual Chassis Stacking), where up
to eight units can form a single virtual
chassis with dual connections to key
servers and access switches. VCStack
can be implemented in the same cabinet
over copper cabling, or to remote
locations using fiber.
Allied Telesis EPSRing™ (Ethernet
Protection Switched Ring), technology
provides a high performing resilient
design for distributed networks. A highspeed solution where recovery occurs
within as little as 50ms can be deployed
in ring-based topologies. Several
switches can form a protected ring,
running at up to 10Gbps.
Scalable
The flexibility of the x610 Series, coupled
with the ability to stack multiple units,
ensures a future-proof network. The
choice of 24-port and 48-port versions
and Gigabit or 10 Gigabit uplink ports
enables uplink bandwidth to be tailored
to suit network applications. Expansion
modules are available for local and
long-distance stacking. Long-distance
expansion modules can be configured to
provide two additional 10G ports.
Flexible endpoint deployment is ensured
with the ability to power devices such
as IP phones, security cameras, and
wireless access points directly from the
switch. This convergence of voice, video
and data on today’s networks is enabled
by Power over Ethernet Plus (PoE+),
which delivers the added benefit of
reducing costs.
Secure
Multiple customers can have their own
secure virtual network within the same
physical infrastructure, as the x610
Series switches are able to divide a
single router into multiple independent
virtual routing domains. Layer 3 network
virtualization provided by Virtual Routing
and Forwarding (VRF Lite) creates
independent routing domains, where IP
addresses can overlap without causing
conflict.
A secure network environment is
guaranteed, with powerful control
over network traffic types, secure
management options, and other multilayered security features built into the
x610 Series switches.
New Features
»» Allied Telesis Management Framework (AMF)
»» BGP4+ for IPv6
alliedtelesis.com
x610 Series | Layer 3+ Network Switches
Key Features
Allied Telesis Management Framework (AMF)
Industry leading Quality of Service (QoS)
»» Allied Telesis Management Framework (AMF) is a
sophisticated suite of management tools that provide
a simplified approach to network management.
Common tasks are automated or made so simple that
the every-day running of a network can be achieved
without the need for highly-trained, and expensive,
network engineers. Powerful features like centralized
management, auto-backup, auto-upgrade, autoprovisioning and auto-recovery enable plug-and-play
networking and zero-touch management.
»» Comprehensive low-latency wirespeed QoS provides
flow-based traffic management with full classification,
prioritization, traffic shaping and min/max bandwidth
profiles. Enjoy boosted network performance and
guaranteed delivery of business-critical Ethernet
services and applications. Time-critical services such
as voice and video take precedence over nonessential services such as file downloads,
maintaining responsiveness of Enterprise applications.
VCStack (Virtual Chassis Stacking)
»» With PoE, a separate power connection to media
endpoints such as IP phones and wireless access
points is not necessary. PoE+ provides even greater
flexibility, providing the capability to connect devices
requiring more power (up to 30 Watts)—for example,
tilt and zoom security cameras.
»» Build a redundant PoE+ high-availability solution
using VCStack and additional RPS units. See the
x610 PSU PoE options table on page 5 for details.
»» Create a VCStack of up to eight units with 48Gbps
of stacking bandwidth to each unit. Stacking
links are connected in a ring so each device has
dual connections to further improve resiliency.
VCStack provides a highly available system where
network resources are spread out across stacked
units, reducing the impact if one of the units fails.
Aggregating switch ports on different units across the
stack provides excellent network resiliency.
Long-distance Stacking
»» Long-distance stacking allows a VCStack to
be created over longer distances, perfect for a
distributed network environment.
EPSRing (Ethernet Protection Switched Ring)
»» EPSRing and 10 Gigabit Ethernet allow several x610
switches to form a high-speed protected ring capable
of recovery within as little as 50ms. This feature is
perfect for high performance and high availability in
enterprise networks.
»» SuperLoop Protection (SLP) enables a link between
two EPSR nodes to be in separate EPSR domains,
improving redundancy and network fault resiliency.
Easy to Manage
»» Allied Telesis x610 Layer 3+ switches run the
advanced AlliedWare Plus™ Layer 3 fully featured
operating system, delivering a rich feature set and an
industry-standard CLI. In addition to the CLI, x610
switches feature a comprehensive GUI for easy
access to monitoring and configuration.
2 | x610 Series
Power over Ethernet Plus (PoE+)
Link Layer Discovery Protocol–Media Endpoint
Discovery (LLDP–MED)
»» LLDP-MED extends LLDP basic network endpoint
discovery and management functions. LLDP-MED
allows for media endpoint specific messages,
providing detailed information on power requirements,
network policy, location discovery (for Emergency Call
Services) and inventory.
Open Shortest Path First (OSPFv3)
»» OSPF is a scalable and adaptive routing protocol for
IP networks. The addition of OSPFv3 adds support
for IPv6 and further strengthens the Allied Telesis
focus on next generation networking.
»» If multiple users share a port, multi-authentication
can be used. Different users on the same port can be
assigned to different VLANs, and so given different
levels of network access. Additionally, a guest VLAN
can be configured to provide a catch-all for users
who aren’t authenticated.
sFlow
»» sFlow is an industry standard technology for
monitoring high-speed switched networks. It provides
complete visibility into network use, enabling
performance optimization, usage accounting/billing,
and defense against security threats. Sampled
packets sent to a collector ensure it always has a
real-time view of network traffic.
Dynamic Host Configuration Protocol
(DHCPv6)
»» DHCPv6 is used to dynamically assign IPv6
addresses to hosts from a central location. Acting as
DHCPv6 client enables the switch to receive an IPv6
address, and acting as server enables the switch to
dynamically allocate IPv6 addresses to hosts. The
DHCPv6 server and client both support the Prefix
Delegation feature which allocates a whole IPv6
subnet to a DHCP client. The client, in turn, can
allocate addresses from this subnet to the hosts that
are connected to it.
Virtual Router Redundancy Protocol (VRRPv3)
»» VRRPv3 is a protocol for providing device redundancy,
by connecting redundant WAN gateway routers or
server access switches in an IPv6 network. It allows
a backup router or switch to automatically take over if
the primary (master) router or switch fails.
Energy Efficient Ethernet (EEE)
Network Access Control (NAC)
»» NAC allows exceptional control over user access
to the network, to mitigate threats to network
infrastructure. Allied Telesis x610 switches use IEEE
802.1x port-based authentication in partnership with
standards-compliant dynamic VLAN assignment,
to assess a user’s adherence to network security
policies, and then either grant access or offer
remediation.
»»The x610 Series supports Energy Efficient Ethernet
(EEE), which automatically reduces the power
consumed by the switch whenever there is no traffic
on a port. This sophisticated feature can significantly
reduce your operating costs by reducing the power
requirements of the switch and any associated
cooling equipment.
x610 Series | Layer 3+ Network Switches
Key Solutions
Internet
Internet
S
00
81
Remote
VPN
S
00
81
Remote
VPN
S
00
81
S
00
81
er
ut
Ro
er
ut
Ro
S
00
81
S
00
81
10 0
x6 x60
10 0
x 6 x60
10 0
x6 x60
10 0
x6 x60
10
x2
S
00
81
Server Farm
Network Attached
Network Attached
Sorage
Storage
Server Farm
10
x2
S
00
81
VCStack link
10 Gigabit link
1 Gigabit link
10/100 link
Link aggregation
m
om
C
on
F
A
ver
Ser
A
VR
F
Shared printer
F
R
V
B
R
Network Virtualization
Virtual Routing and Forwarding (VRF
Lite) allows multiple customers to
share a common infrastructure, while
maintaining their own independent
virtual routing domains. Individual
customers can take advantage of
shared resources such as printers and
Internet access via filtered inter-VRF
communication, while maintaining
absolute security. See diagram 2.
Internet
V
Distributed Core
VCStack LD (Long Distance) enables the
VCStack solution to provide a distributed
network core. The increased distance
provided by fiber stacking connectivity
means that members of the virtual
chassis do not need to be co-located.
Instead, they can be kilometers apart.
Diagram 1 shows an example of a long
distance stack, where the single virtual
distributed core ensures high availability
of data for network users.
VCStack link
10 Gigabit link
1 Gigabit link
10/100 link
Link
Aggregation
Diagram
1: Long-Distance Stacking
x610 Series
Customer A
Customer B
ver
Ser
B
Diagram 2: VRF Lite
x610 Series | 3
x610 Series | Layer 3+ Network Switches
Specifications
PRODUCT
10/100/1000T (RJ-45)
COPPER PORTS
100/1000X
SFP PORTS
SFP AND 10/100/1000
COMBO PORTS
TOTAL GIGABIT
PORTS
20
-
4
24
-
AT-x610-24Ts
10 GIGABIT SFP+
PORTS
MAX POE+
PORTS
SWITCHING
FABRIC
FORWARDING
RATE
2*
-
96Gbps
71.4Mpps
AT-x610-24Ts-POE+
20
-
4
24
-
2*
24
96Gbps
71.4Mpps
AT-x610-24Ts/X
20
-
4
24
2
4*
-
136Gbps
101.2Mpps
AT-x610-24Ts/X-POE+
20
-
4
24
2
4*
24
136Gbps
101.2Mpps
AT-x610-24SPs/X
-
20
4
24
2
4*
-
136Gbps
101.2Mpps
AT-x610-48Ts
44
-
4
48
-
2*
-
144Gbps
107.1Mpps
AT-x610-48Ts-POE+
44
-
4
48
-
2*
48
144Gbps
107.1Mpps
AT-x610-48Ts/X
46
-
2
48
2
4*
-
184Gbps
136.9Mpps
AT-x610-48Ts/X-POE+
46
-
2
48
2
4*
48
184Gbps
136.9Mpps
* with AT-x6EM/XS2 module in standalone switch
Performance
»»48Gbps of stacking bandwidth
»» Supports 9KB jumbo frames
»» Wirespeed multicasting
»» Up to 32K MAC addresses
»» 512MB DDR SDRAM
»» 64MB flash memory
»» Packet buffer memory:AT-x610-24Ts - 2MB
AT-x610-48Ts - 4MB
Reliability
»» Modular AlliedWare Plus operating system
»» Redundant power supply available to load share with
internal power supply, providing uninterrupted power
and extra reliability
»» Full environmental monitoring of PSUs, fans,
temperature and internal voltages. SNMP traps alert
network managers in case of any failure
Expandability
»» One expansion bay
»» Stackable up to eight x610 units in a VCStack
»» IPv6 routing license option
»» Advanced Layer 3 license option
Flexibility and Compatibility
»» Mix up to four x600 and x610 units in the same
VCStack
»» Gigabit SFP combo ports support any combination of
1000T, 1000X SFPs, 1000SX, 1000LX, 1000ZX or
1000ZX CWDM SFPs
»» SFP ports on AT-x610-24SPs/X support any
combination of 10/100/1000T, 100FX, 100BX,
1000SX, 1000LX, 1000ZX or 1000ZX CWDM SFPs
Diagnostic Tools
»» Built-In Self Test (BIST)
»» Hardware health monitoring
»» Automatic link flap detection and port shutdown
»» Optical Digital Diagnostic Monitoring (DDM)
»» Ping polling for IPv4 and IPv6
»» Port mirroring
»»TraceRoute for IPv4 and IPv6
IPv4 Features
»» Black hole routing
»» Directed broadcast forwarding
»» DNS relay
4 | x610 Series
»» Equal Cost Multi Path (ECMP) routing
»» Policy-based routing
»» Route maps and route redistribution (OSPF, BGP, RIP)
»» IPv4 static unicast and multicast routing
»» UDP broadcast helper (IP helper)
»» Up to 64 Virtual Routing and Forwarding (VRF lite)
domains (with license)
IPv6 Features
»» DHCPv6 relay, DHCPv6 client
»» DNSv6 relay, DNSv6 client
»» IPv4 and IPv6 dual stack
»» IPv6 QoS and hardware ACLs
»» Device management over IPv6 networks with
SNMPv6, Telnetv6, SSHv6 and Syslogv6
»» NTPv6 client and server
»» IPv6 static unicast and multicast routing
Management
»» Allied Telesis Management Framework (AMF)
enables powerful centralized management and zerotouch device installation and recovery
»» Console management port on the front panel for ease
of access
»» Eco-friendly mode allows ports and LEDs to be
disabled to save power
»» Web-based Graphical User Interface (GUI)
»» Industry-standard CLI with context-sensitive help
»» SD/SDHC memory card socket allows software
release files, configurations and other files to be
stored for backup and distribution to other devices
»» Powerful CLI scripting engine
»» Configurable logs and triggers provide an audit trail of
SD card insertion and removal
»» Comprehensive SNMP MIB support for standardsbased device management
»» Built-in text editor
»» Event-based triggers allow user-defined scripts to be
executed upon selected system events
Quality of Service (QoS)
»» 8 priority queues with a hierarchy of high priority
queues for real time traffic, and mixed scheduling, for
each switch port
»» Limit bandwidth per port or per traffic class down to
64kbps
»» Wirespeed traffic classification with low latency
essential for VoIP and real-time streaming media
applications
»» Flow control optimized for iSCSI traffic
»» Policy-based QoS based on VLAN, port, MAC and
general packet classifiers
»» Policy-based storm protection
»» Extensive remarking capabilities
»»Taildrop for queue congestion control
»» Strict priority, weighted round robin or mixed
scheduling
»» IP precedence and DiffServ marking based on layer 2,
3 and 4 headers
Resiliency
»» Stacking ports can be configured as 10G Ethernet
ports
»» Control Plane Prioritization (CPP) ensures the CPU
always has sufficient bandwidth to process network
control traffic
»» Dynamic link failover (host attach)
»» EPSRing (Ethernet Protection Switched Rings) with
SuperLoop Protection (SLP)
»» EPSR enhanced recovery for extra resiliency
»» Long-Distance stacking (LD-VCStack)
»» Loop protection: loop detection and thrash limiting
»» PVST+ compatibility mode
»» STP root guard
»» VCStack fast failover minimizes network disruption
Security
»» Access Control Lists (ACLs) based on layer 3 and 4
headers
»» Configurable auth-fail and guest VLANs
»» Authentication, Authorisation and Accounting (AAA)
»» Bootloader can be password protected for device
security
»» BPDU protection
»» DHCP snooping, IP source guard and Dynamic ARP
Inspection (DAI)
»» DoS attack blocking and virus throttling
»» Dynamic VLAN assignment
»» MAC address filtering and MAC address lock-down
»» Network Access and Control (NAC) features manage
endpoint security
»» Port-based learn limits (intrusion detection)
»» Private VLANs provide security and port isolation for
multiple customers using the same VLAN
»» Secure Copy (SCP)
»» Strong password security and encryption
x610 Series | Layer 3+ Network Switches
»»Tri-authentication: MAC-based, web-based and IEEE
802.1x
Safety
»» Storage relative humidity range:
5% to 95% non-condensing
»» Operating altitude:
3,048 meters maximum (10,000 ft)
»» Front-to-back forced air cooling
Environmental Specifications
»» Operating temperature range:
0°C to 45°C (32°F to 113°F)
Derated by 1°C per 305 meters (1,000 ft)
Operation up to 50°C (122°F) for limited period(s) †
»» Storage temperature range:
-25°C to 70°C (-13°F to 158°F)
»» Operating relative humidity range:
5% to 90% non-condensing
»» Standards: UL60950-1, CAN/CSA-C22.2
No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS
60950.1
»» Certification: UL, cUL, TUV
Restrictions on Hazardous Substances (RoHS)
Compliance
Electrical Approvals and Compliances
†
»» EMC: EN55022 class A, FCC class A, VCCI class A
»» Immunity: EN55024, EN61000-3-levels 2
(Harmonics), and 3 (Flicker) – AC models only
»» EU RoHS compliant
»» China RoHS compliant
Not more than the following in a one year period:
96 consecutive hours, or 360 hours total or 15 occurrences
»» Indonesia
Country of Origin
Physical Specifications
PRODUCT
WIDTH
DEPTH
HEIGHT
MOUNTING
AT-x610-24Ts
440 mm (17.32 in)
420 mm (16.54 in)
44 mm (1.73 in)
AT-x610-24Ts-POE+
440 mm (17.32 in)
420 mm (16.54 in)
AT-x610-24Ts/X
440 mm (17.32 in)
AT-x610-24Ts/X-POE+
440 mm (17.32 in)
AT-x610-24SPs/X
WEIGHT
UNPACKAGED
PACKAGED
Rack-mount
6.3 kg (13.89 lb)
8.8 kg (19.4 lb)
44 mm (1.73 in)
Rack-mount
5.6 kg (12.35 lb)
7.6 kg (16.76 lb)
420 mm (16.54 in)
44 mm (1.73 in)
Rack-mount
6.3 kg (13.89 lb)
9.7 kg (21.38 lb)
420 mm (16.54 in)
44 mm (1.73 in)
Rack-mount
5.6 kg (12.35 lb)
7.6 kg (16.76 lb)
440 mm (17.32 in)
420 mm (16.54 in)
44 mm (1.73 in)
Rack-mount
6.6 kg (14.55 lb)
9.2 kg (20.3 lb)
AT-x610-48Ts
440 mm (17.32 in)
420 mm (16.54 in)
44 mm (1.73 in)
Rack-mount
6.7 kg (14.77 lb)
9.0 kg (19.84 lb)
AT-x610-48Ts-POE+
440 mm (17.32 in)
420 mm (16.54 in)
44 mm (1.73 in)
Rack-mount
6.0 kg (13.23 lb)
7.8 kg (17.2 lb)
AT-x610-48Ts/X
440 mm (17.32 in)
420 mm (16.54 in)
44 mm (1.73 in)
Rack-mount
6.8 kg (14.99 lb)
9.8 kg (21.61 lb)
AT-x610-48Ts/X-POE+
440 mm (17.32 in)
420 mm (16.54 in)
44 mm (1.73 in)
Rack-mount
6.0 kg (13.23 lb)
8.5 kg (18.74 lb)
AT-RPS3000
440 mm (17.32 in)
360 mm (14.17 in)
44 mm (1.73 in)
Rack-mount
4.3 kg (9.48 lb)
6.1 kg (13.45 lb)
AT-PWR250 AC
150 mm (5.9 in)
275 mm (10.83 in)
42 mm (1.65 in)
Internal
1.5 kg (3.31 lb)
2.7 kg (5.95 lb)
AT-PWR250 DC
150 mm (5.9 in)
275 mm (10.83 in)
42 mm (1.65 in)
Internal
1.5 kg (3.31 lb)
2.7 kg (5.95 lb)
AT-PWR800
150 mm (5.9 in)
275 mm (10.83 in)
42 mm (1.65 in)
Internal
1.8 kg (3.97 lb)
2.9 kg (6.39 lb)
AT-PWR1200
150 mm (5.9 in)
330 mm (13 in)
42 mm (1.65 in)
Internal
2.2 kg (4.85 lb)
4.5 kg (9.92 lb)
AT-x6EM/XS2
150 mm (5.9 in)
95 mm (3.74 in)
30 mm (1.18 in)
Internal
0.2 kg (0.44 lb)
0.5 kg (1.1 lb)
AT-StackXG
150 mm (5.9 in)
95 mm (3.74 in)
30 mm (1.18 in)
Internal
0.2 kg (0.44 lb)
0.5 kg (1.1 lb)
Power and Noise Characteristics
INTERNAL PSU OR AT-PWR250 (NO PoE LOAD)
PRODUCT
MAX POWER
CONSUMPTION
MAX HEAT
DISSIPATION
NOISE
AT-PWR800 (FULL PoE+ LOAD)
MAX POWER
CONSUMPTION
MAX HEAT
DISSIPATION
AT-PWR1200 (FULL PoE+ LOAD)
NOISE
MAX POWER
CONSUMPTION
MAX HEAT
DISSIPATION
NOISE
AT-x610-24Ts
81W
276 BTU/hr
51.2 dBA
-
-
-
-
-
-
AT-x610-24Ts-POE+
87W
297 BTU/hr
51.2 dBA
632W
519 BTU/hr
51.8 dBA
930W
717 BTU/hr
58.3
AT-x610-24Ts/X
89W
304 BTU/hr
51.2 dBA
-
-
-
-
-
-
AT-x610-24Ts/X-POE+
92W
314 BTU/hr
51.2 dBA
636W
532 BTU/hr
51.8 dBA
935W
734 BTU/hr
58.3
AT-x610-24SPs/X
108W
368 BTU/hr
51.2 dBA
-
-
-
-
-
-
AT-x610-48Ts
112W
382 BTU/hr
51.2 dBA
-
-
-
-
-
-
AT-x610-48Ts-POE+
119W
406 BTU/hr
51.2 dBA
673W
659 BTU/hr
51.8 dBA
1,027W
843 BTU/hr
58.3
AT-x610-48Ts/X
120W
409 BTU/hr
51.2 dBA
-
-
-
-
-
-
AT-x610-48Ts/X-POE+
125W
427 BTU/hr
51.2 dBA
681W
686 BTU/hr
51.8 dBA
1,034W
867 BTU/hr
58.3
Noise tested to ISO7779; front bystander position
Latency (microseconds)
PSU PoE Options
POWER SUPPLY
UNIT
PoE POWER
AVAILABLE
MAXIMUM PoE PORTS SUPPORTED
CLASS 1
(4.0 W)
CLASS 2
(7.0 W)
CLASS 3
(15.4 W)
PRODUCT
CLASS 4
(30 W)
PORT SPEED
10MBPS
100MBPS
1GBPS
AT-x610-24Ts
80.0µs
10.6µs
4.2µs
10GBPS
AT-PWR250
-
-
-
-
-
AT-x610-24Ts/X
80.0µs
10.6µs
4.2µs
3.4µs
AT-PWR800
480W
48
48
31
16
AT-x610-24SPs/X
80.0µs
10.6µs
4.2µs
3.1µs
AT-PWR1200
780W
48
48
48
26
AT-x610-48Ts
79.3µs
10.6µs
4.2µs
AT-x610-48Ts/X
79.3µs
10.7µs
4.2µs
4.9µs
x610 Series | 5
x610 Series | Layer 3+ Network Switches
Standards and Protocols
AlliedWare Plus Operating System
Version 5.4.4-1
Authentication
BGP dynamic capability
BGP outbound route filtering
RFC 1772 Application of the Border Gateway Protocol (BGP) in the Internet
RFC 1997 BGP communities attribute
RFC 2385 Protection of BGP sessions via the TCP MD5 signature option
RFC 2439 BGP route flap damping
RFC 2545 Use of BGP-4 multiprotocol extensions for IPv6 inter-domain routing
RFC 2858 Multiprotocol extensions for BGP-4
RFC 2918 Route refresh capability for BGP-4
RFC 3392 Capabilities advertisement with BGP-4
RFC 3882 Configuring BGP to block Denial-of-Service (DoS) attacks
RFC 4271 Border Gateway Protocol 4 (BGP-4)
RFC 4360 BGP extended communities
RFC 4456 BGP route reflection - an alternative to full mesh iBGP
RFC 4724 BGP graceful restart
RFC 4893 BGP support for four-octet AS number space
RFC 5065 Autonomous system confederations for BGP
Encryption
FIPS 180-1 Secure Hash standard (SHA-1)
FIPS 186
Digital signature standard (RSA)
FIPS 46-3 Data Encryption Standard (DES and 3DES)
Ethernet
IEEE 802.1AXLink aggregation (static and LACP)
IEEE 802.2 Logical Link Control (LLC)
IEEE 802.3 Ethernet
IEEE 802.3ab1000BASE-T
IEEE 802.3adStatic and dynamic link aggregation
IEEE 802.3ae10 Gigabit Ethernet
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet plus (PoE+)
IEEE 802.3azEnergy Efficient Ethernet (EEE)
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow control - full-duplex operation
IEEE 802.3z 1000BASE-X
IPv4 Standards
RFC 768 User Datagram Protocol (UDP)
RFC 791 Internet Protocol (IP)
RFC 792 Internet Control Message Protocol (ICMP)
RFC 793 Transmission Control Protocol (TCP)
RFC 826 Address Resolution Protocol (ARP)
RFC 894 Standard for the transmission of IP datagrams over Ethernet networks
RFC 919 Broadcasting Internet datagrams
RFC 922 Broadcasting Internet datagrams in the
presence of subnets
RFC 932 Subnetwork addressing scheme
RFC 950 Internet standard subnetting procedure
RFC 951 Bootstrap Protocol (BootP)
RFC 1027 Proxy ARP
RFC 1035 DNS client
RFC 1042 Standard for the transmission of IP datagrams over IEEE 802 networks
RFC 1071 Computing the Internet checksum
RFC 1122 Internet host requirements
RFC 1191 Path MTU discovery
RFC 1256 ICMP router discovery messages
RFC 1518 An architecture for IP address allocation with CIDR
RFC 1519 Classless Inter-Domain Routing (CIDR)
RFC 1542 Clarifications and extensions for BootP
RFC 1591 Domain Name System (DNS)
RFC 1812 Requirements for IPv4 routers
RFC 1918 IP addressing
RFC 2581 TCP congestion control
6 | x610 Series
IPv6 Standards
RFC 1981 Path MTU discovery for IPv6
RFC 2460 IPv6 specification
RFC 2464 Transmission of IPv6 packets over Ethernet networks
RFC 3056 Connection of IPv6 domains via IPv4 clouds
RFC 3484 Default address selection for IPv6
RFC 3596 DNS extensions to support IPv6
RFC 4007 IPv6 scoped address architecture
RFC 4193 Unique local IPv6 unicast addresses
RFC 4291 IPv6 addressing architecture
RFC 4443 Internet Control Message Protocol (ICMPv6)
RFC 4861 Neighbor discovery for IPv6
RFC 4862 IPv6 Stateless Address Auto-Configuration (SLAAC)
RFC 5014 IPv6 socket API for source address selection
RFC 5095 Deprecation of type 0 routing headers in IPv6
RFC 5175 IPv6 Router Advertisement (RA) flags option
RFC 6105 IPv6 Router Advertisement (RA) guard
Management
AMF MIB and SNMP traps
AT Enterprise MIB
SNMPv1, v2c and v3
IEEE 802.1ABLink Layer Discovery Protocol (LLDP)
RFC 1155 Structure and identification of management information for TCP/IP-based Internets
RFC 1157 Simple Network Management Protocol (SNMP)
RFC 1212 Concise MIB definitions
RFC 1213 MIB for network management of TCP/IP-based Internets: MIB-II
RFC 1215 Convention for defining traps for use with the SNMP
RFC 1227 SNMP MUX protocol and MIB
RFC 1239 Standard MIB
RFC 1724 RIPv2 MIB extension
RFC 2011 SNMPv2 MIB for IP using SMIv2
RFC 2012 SNMPv2 MIB for TCP using SMIv2
RFC 2013 SNMPv2 MIB for UDP using SMIv2
RFC 2096 IP forwarding table MIB
RFC 2578 Structure of Management Information v2 (SMIv2)
RFC 2579 Textual conventions for SMIv2
RFC 2580 Conformance statements for SMIv2
RFC 2674 Definitions of managed objects for bridges with traffic classes, multicast filtering and VLAN extensions
RFC 2741 Agent extensibility (AgentX) protocol
RFC 2787 Definitions of managed objects for VRRP
RFC 2819 RMON MIB (groups 1,2,3 and 9)
RFC 2863 Interfaces group MIB
RFC 3164 Syslog protocol
RFC 3176 sFlow: a method for monitoring traffic in switched and routed networks
RFC 3411 An architecture for describing SNMP
management frameworks
RFC 3412 Message processing and dispatching for the SNMP
RFC 3413 SNMP applications
RFC 3414 User-based Security Model (USM) for SNMPv3
RFC 3415 View-based Access Control Model (VACM) for SNMP
RFC 3416 Version 2 of the protocol operations for the SNMP
RFC 3417 Transport mappings for the SNMP
RFC 3418 MIB for SNMP
RFC 3621 Power over Ethernet (PoE) MIB
RFC 3635 Definitions of managed objects for the Ethernet-
like interface types
RFC 3636 IEEE 802.3 MAU MIB
RFC 4188 Definitions of managed objects for bridges
RFC 4318 Definitions of managed objects for bridges with RSTP
RFC 4560 Definitions of managed objects for remote ping, traceroute and lookup operations
RFC 6527 Definitions of managed objects for VRRPv3
Multicast Support
Bootstrap Router (BSR) mechanism for PIM-SM
IGMP query solicitation
IGMP snooping (IGMPv1, v2 and v3)
IGMP snooping fast-leave
IGMP/MLD multicast forwarding (IGMP/MLD proxy)
MLD snooping (MLDv1 and v2)
PIM for IPv6
RFC 1112 Host extensions for IP multicasting (IGMPv1)
RFC 2236 Internet Group Management Protocol v2 (IGMPv2)
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
RFC 2715 Interoperability rules for multicast routing protocols
RFC 3376 IGMPv3
RFC 3810 Multicast Listener Discovery v2 (MLDv2) for IPv6
RFC 3973 PIM Dense Mode (DM)
RFC 4541 IGMP and MLD snooping switches
RFC 4601 Protocol Independent Multicast - Sparse Mode (PIM-SM): protocol specification (revised)
RFC 4604 Using IGMPv3 and MLDv2 for source-specific multicast
RFC 4607 Source-specific multicast for IP
Open Shortest Path First (OSPF)
OSPF link-local signaling
OSPF MD5 authentication
OSPF restart signaling
Out-of-band LSDB resync
RFC 1245 OSPF protocol analysis
RFC 1246 Experience with the OSPF protocol
RFC 1370 Applicability statement for OSPF
RFC 1765 OSPF database overflow
RFC 2328 OSPFv2
RFC 2370 OSPF opaque LSA option
RFC 2740 OSPFv3 for IPv6
RFC 3101 OSPF Not-So-Stubby Area (NSSA) option
RFC 3509 Alternative implementations of OSPF area border routers
RFC 3623 Graceful OSPF restart
RFC 3630 Traffic engineering extensions to OSPF
RFC 4552 Authentication/confidentiality for OSPFv3
RFC 5329 Traffic engineering extensions to OSPFv3
Quality of Service (QoS)
IEEE 802.1p Priority tagging
RFC 2211 Specification of the controlled-load network element service
RFC 2474 DiffServ precedence for eight queues/port
RFC 2475 DiffServ architecture
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2697 A single-rate three-color marker
RFC 2698 A two-rate three-color marker
RFC 3246 DiffServ Expedited Forwarding (EF)
Resiliency
IEEE 802.1D MAC bridges
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
RFC 5798 Virtual Router Redundancy Protocol version 3 (VRRPv3) for IPv4 and IPv6
Routing Information Protocol (RIP)
RFC 1058 Routing Information Protocol (RIP)
RFC 2080 RIPng for IPv6
RFC 2081 RIPng protocol applicability statement
RFC 2082 RIP-2 MD5 authentication
RFC 2453 RIPv2
Security
SSH remote login
SSLv2 and SSLv3
TACACS+ accounting and authentication
IEEE 802.1X authentication protocols (TLS, TTLS, PEAP and MD5)
IEEE 802.1X multi-supplicant authentication
x610 Series | Layer 3+ Network Switches
IEEE 802.1X port-based network access control
RFC 2246 TLS protocol v1.0
RFC 2865 RADIUS
RFC 2866 RADIUS accounting
RFC 2868 RADIUS attributes for tunnel protocol support
RFC 3546 Transport Layer Security (TLS) extensions
RFC 3579 RADIUS support for Extensible Authentication Protocol (EAP)
RFC 3580 IEEE 802.1x RADIUS usage guidelines
RFC 3748 PPP Extensible Authentication Protocol (EAP)
RFC 4251 Secure Shell (SSHv2) protocol architecture
RFC 4252 Secure Shell (SSHv2) authentication protocol
RFC 4253 Secure Shell (SSHv2) transport layer protocol
RFC 4254 Secure Shell (SSHv2) connection protocol
Services
RFC 854 Telnet protocol specification
RFC 855 Telnet option specifications
RFC 857 Telnet echo option
RFC 858 Telnet suppress go ahead option
RFC 1091 Telnet terminal-type option
RFC 1350 Trivial File Transfer Protocol (TFTP)
RFC 1985 SMTP service extension
RFC 2049 MIME
RFC 2131 DHCPv4 (server, relay and client)
RFC 2132 DHCP options and BootP vendor extensions
RFC 2554 SMTP service extension for authentication
RFC 2616 Hypertext Transfer Protocol - HTTP/1.1
RFC 2821 Simple Mail Transfer Protocol (SMTP)
RFC 2822 Internet message format
RFC 3046 DHCP relay agent information option (DHCP option 82)
RFC 3315 DHCPv6 (server, relay and client)
RFC 3633 IPv6 prefix options for DHCPv6
RFC 3646 DNS configuration options for DHCPv6
RFC 3993 Subscriber-ID suboption for DHCP relay agent option
RFC 4330 Simple Network Time Protocol (SNTP) version 4
RFC 5905 Network Time Protocol (NTP) version 4
VLAN Support
Generic VLAN Registration Protocol (GVRP)
IEEE 802.1adProvider bridges (VLAN stacking, Q-in-Q)
IEEE 802.1Q Virtual LAN (VLAN) bridges
IEEE 802.1v VLAN classification by protocol and port
IEEE 802.3acVLAN tagging
Voice over IP (VoIP)
LLDP-MEDANSI/TIA-1057
Voice VLAN
Ordering Information
Feature Licenses
1
2
NAME
DESCRIPTION
INCLUDES
AT-FL-x610-01
x610 advanced Layer 3 license
»» OSPF1 (10,000 routes)
»» PIM-SM, DM and SSM
»» BGP4 (5,000 routes)
»» VLAN double tagging (Q-in-Q)
»» VRF Lite (64 domains)
AT-FL-x610-02
x610 IPv6 pack
»» RIPng (1,000 routes)
»» OSPFv3 (5,000 routes)
»» BGP4+ for IPv6 (5,000 routes)
»» PIMv6-SM
»» MLDv1 and v2
AT-FL-RADIUS-FULL
Increase local RADIUS server support limits2
»» 5000 users
»» 1000 NAS
The standard switch software supports 64 OSPF routes.
100 users and 24 NAS can be stored in local RADIUS database with base software.
x610 Series
AT-x610-24Ts-60
24-port Gigabit switch with 20 x 10/100/1000T
(RJ-45) copper ports and 4 additional combo
ports (1000X SFP or 10/100/1000T), internal PSU
AT-x610-24Ts-POE+-00
24-port Gigabit switch with 20 x 10/100/1000T
(RJ-45) Power over Ethernet (IEEE 802.3at)
copper ports and 4 additional combo ports
(1000X SFP or 10/100/1000T), removable PSU
(PSU not included)
AT-x610-24Ts/X-60
24-port Gigabit switch with 20 x 10/100/1000T
(RJ-45) copper ports, 4 additional combo ports
(1000X SFP or 10/100/1000T) and 2 x SFP+
10 Gigabit ports, internal PSU
AT-x610-24Ts/X-PoE+-00
24-port Gigabit switch with 20 x 10/100/1000T
(RJ-45) Power over Ethernet (IEEE 802.3at)
copper ports, 4 additional combo ports (1000X
SFP or 10/100/1000T) and 2 x SFP+ 10 Gigabit
ports, removable PSU (PSU not included)
AT-x610-24SPs/X-60
24-port Gigabit switch with 20 x 100/1000X (SFP)
ports, 4 additional combo ports (1000X SFP or
10/100/1000T) and 2 x SFP+ 10 Gigabit ports,
internal PSU
AT-x610-48Ts-60
48-port Gigabit switch with 44 x 10/100/1000T
(RJ-45) copper ports and 4 additional combo
ports (1000X SFP or 10/100/1000T), internal PSU
AT-x610-48Ts-POE+-00
48-port Gigabit switch with 44 x 10/100/1000T
(RJ-45) Power over Ethernet (IEEE 802.3at)
copper ports and 4 additional combo ports
(1000X SFP or 10/100/1000T), removable PSU
(PSU not included)
AT-x610-48Ts/X-60
48-port Gigabit switch with 46 x 10/100/1000T
(RJ-45) copper ports, 2 additional combo ports
(1000X SFP or 10/100/1000T) and 2 x SFP+
10 Gigabit ports, internal PSU
AT-x610-48Ts/X-PoE+-00
48-port Gigabit switch with 46 x 10/100/1000T
(RJ-45) Power over Ethernet (IEEE 802.3at)
copper ports, 2 additional combo ports (1000X
SFP or 10/100/1000T) and 2 x SFP+ 10 Gigabit
ports, removable PSU (PSU not included)
x610 Series | 7
x610 Series | Layer 3+ Network Switches
AT-SPFXBD-LC-13
100BX Bi-Di (1310 nm Tx, 1550 nm Rx) fiber up to
10 km
Expansion Modules
AT-x6EM/XS2-00
Expansion module (2 x SFP+) for long distance
stacking or two additional 10GbE ports
AT-StackXG-00
Expansion module with one AT-StackXG/0.5-00
cable included
10GbE SFP+ Modules
AT-SPFXBD-LC-15
100BX Bi-Di (1550 nm Tx, 1310nm Rx) fiber up to
10 km
AT-SP10SR
10GSR 850 nm short-haul, 300 m with MMF
1000Mbps SFP Modules
AT-SP10SR/I
10GSR 850 nm short-haul, 300 m with MMF
industrial temperature
AT-SP10LRM
10GLRM 1310 nm short-haul, 220 m with MMF
AT-SP10LR
10GLR 1310 nm medium-haul, 10 km with SMF
AT-SP10LR/I
10GLR 1310 nm medium-haul, 10 km with SMF
industrial temperature
Cables
AT-StackXG/0.5-00
0.5 meter cable for stacking
AT-StackXG/1-00
1 meter cable for stacking
AT-SP10TW1
1 meter SFP+ direct attach cable
AT-SP10LR20/I
10GER 1310nm long-haul, 20 km with SMF
industrial temperature
AT-SP10ER40/I
10GER 1310nm long-haul, 40 km with SMF
industrial temperature
AT-SP10ZR80/I
10GER 1550nm long-haul, 80 km with SMF
industrial temperature
AT-SPTX
1000T 100 m copper
AT-SPSX
1000SX GbE multi-mode 850 nm fiber up to 550 m
AT-SPSX/I
1000SX GbE multi-mode 850 nm fiber up to 550 m
industrial temperature
AT-SPEX
1000X GbE multi-mode 1310 nm fiber up to 2 km
AT-SPLX10
1000LX GbE single-mode 1310 nm fiber up to 10 km
AT-SPLX10/I
1000LX GbE single-mode 1310 nm fiber up to 10 km
industrial temperature
AT-SPBD10-13
1000LX GbE Bi-Di (1310 nm Tx, 1490 nm Rx) fiber
up to 10 km
AT-SP10TW3
3 meter SFP+ direct attach cable
100Mbps SFP Modules
AT-SPBD10-14
1000LX GbE Bi-Di (1490 nm Tx, 1310 nm Rx) fiber
up to 10 km
AT-SP10TW7
7 meter SFP+ direct attach cable
AT-SPFX/2
100FX multi-mode 1310 nm fiber up to 2 km
AT-SPLX40
1000LX GbE single-mode 1310 nm fiber up to 40 km
AT-SPFX/15
100FX single-mode 1310 nm fiber up to 15 km
AT-SPZX80
1000ZX GbE single-mode 1550 nm fiber up to 80 km
PoE Power Supplies
Power Supply Accessories
AT-PWR800-xx
Additional 800W AC system and PoE+ power supply
AT-RPS3000-00
Chassis for up to two redundant power supplies
(PSUs not included)
AT-PWR1200-xx
Additional 1200W AC system and PoE+ power
supply
Where xx =
10 for US power cord
20 for no power cord
30 for UK power cord
40 for Australian power cord
50 for European power cord
AT-PWR250-xx
Additional 250W AC system power supply
AT-PWR250-80
Additional 250W DC system power supply
AT-RPS-CBL1.0
1 meter RPS cable
North America Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
EMEA & CSA Operations | Incheonweg 7 | 1437 EK Rozenburg | The Netherlands | T: +31 20 7950020 | F: +31 20 7950021
alliedtelesis.com
© 2014 Allied Telesis, Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
617-000470 Rev Q