1. home and garden
2. appliances
3. small appliances
4. food processors

ShenZhen GETECH CO.,LTD
GEEETECH
Acrylic Frame Geeetech I3 3D Printer
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
-1-
ShenZhen GETECH CO.,LTD
GEEETECH
Copyright Declaration
The copyright of this manual belongs to the Shenzhen GETECH CO., LTD. (hereinafter
referred to as the "Geeetech"), and all rights reserved. No part of this specification should be
reproduced or extracted in any forms or means without the prior written consent of Geeetech by any
company and individuals.
Technical Support
If you are interested in the technology of 3 D printing, flight control and U-home, welcome to
Geeetech, we have series of made-up products, main boards, modules and a variety of peripherals
for you. Or if you are looking for relevant information or technical support, please login our forum
where you can find anything you want about open source. To know more about our new products,
please visit www.geeetech.com, we will serve you wholeheartedly.
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
-2-
ShenZhen GETECH CO.,LTD
GEEETECH
SAFTY INSTRUCTIONS
Building the printer will require a certain amount of physical dexterity, common sense and a
thorough understanding of what you are doing. We have provided this manual to help you assemble
it easily.
However ultimately we cannot be responsible for your health and safety whilst building or
operating the printer, with that in mind be sure you are confident with what you are doing prior to
commencing with building or buying. Read the entire manual to enable you to make an informed
decision.
Building and operating involves electricity, so all necessary precautions should be taken and
adhered to, the printer runs on 12V supplied by a certified power supply, so you shouldn’t ever have
to get involved with anything over 12V but bear in mind there can still be high currents involved
and even at 12V they shouldn’t be taken lightly.
High temperatures are involved with 3D Printing, the Extrusion nozzle of the hot end can run
about 230°C, the heated bed runs 110°C and the molten plastic extruded will initially be at around
200°C, so special care and attention should be made when handling these parts of the printer during
operation.
We wouldn’t recommend leaving your printer running unattended, or at least until you are
confident to do so. We cannot be held responsible for any loss, damage, threat, hurt or other
negligent result from either building or using the printer.
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
-3-
ShenZhen GETECH CO.,LTD
GEEETECH
PACKAGE LIST:
This list includes all the parts required to assemble your Prusa Mendel I3 Acrylic printer. After
you received your package, please check if all the parts listed are included. Also make sure all the
components are in good condition and not damaged during shipping. If anything is missing please
contact with our customer service straight away.
No.
1
2
3
4
5
Name
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Threaded Rod
Specifications
D8*L322mm
D8*L370mm
D8*L410mm
D8*19~20mm
M8*L300mm
Z-axis screw
M10*L450mm
M3
M4
M8
M10
M3
M4
6
7
8
9
10
11
12
Threaded Rod
M3 Washers
M4 Washers
M8 Washers
M10 Washers
Nut
Nut
13
Nut
14
15
Lock nut
Lock nut
M10
Hex Socket nuts M3
Hex Socket nuts M4
16
Lock nut
Hex Socket nuts M8
Qty
Pic
2
2
2
1
2
2
124
11
8
12
64
7
12
12
4
1
17
18
19
Wing nut
M3
4
M8
2
M10
6
Z-axis nut
Spring washer
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
-4-
ShenZhen GETECH CO.,LTD
GEEETECH
20
Screw locking
ring
M8
21
Bolts
22
23
24
25
26
27
28
29
30
Bolts
Bolts
Bolts
Bolts
Bolts
Bolts
Bolts
Bolts
Bolts
31
Bolts
32
Bolts
2
Jimi headless
M3x6mm
M3x10mm
M3x12mm
M3x16mm
M3x20mm
M3x30mm
M3x50mm
M4x10mm
M4x16mm
M4x25mm
1
20
2
44
18
12
1
4
2
7
M4x50mm
2
countersunk head bolt
M3x16mm
2
33
Spring
inner diameter 4mm,
wire diameter 0.5mm,
length 30mm
34
Spring
inner diameter 5mm,
wire diameter 0.8mm,
length 10mm
2
624zz
2
608zz
3
35
36
37
38
39
624ZZ Ball
bearing
608ZZ Ball
bearing
LM8UU
Linear
Bearings
Timing Belts
Timing Belts
LM8UU
L1=690mm
L1=860mm
www.geeetech.com
4
12
1
1
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
-5-
ShenZhen GETECH CO.,LTD
GEEETECH
20tooth d5mm
2
41
42
20- tooth
MXL
Aluminum
Pulleys
End stop
End stop
X-axis two blue lines
Y-axis two red lines
1
1
43
End stop
Z-axis two black lines
1
44
Spacer
3mm diameter
8mm length
4
45
USB Cord
A-B
1
46
Thermometry
wire
50cm 2pin with
DuPont socket
1
47
Heating
Wire
50cm
2
48
3D Power
Cable
3*0.75 Square mm
Switch Line
1
49
Dovetail
clamp
40
www.geeetech.com
4
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
-6-
ShenZhen GETECH CO.,LTD
GEEETECH
50
Nylon ties
51
Heat sink
30
9*10*5mm
4
52
Sticker
53
Coil
54
Grater
1
55
PVC-U
plastic pipe
1
56
PVC-U
plastic pipe
elbow
2
57
58
1
3M
1
Power Cable
Universal power cable
to computer
1
Power outlet
AC power outlet
1
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
-7-
ShenZhen GETECH CO.,LTD
GEEETECH
DuPont cable
4Pin
Male-4PinFemale
300mm
1
60
Hob Bolt
M8x55
1
61
Couplings
59
5-8mm
2
62
Fan
63
MK2A
64
Aluminum
plate
40x40x15mm 12V
1
WITH 100k NTC
Thermistor
1
216mmx216mmx3m
m
1
65
Borosilicate
glass
216mmx216mmx3m
m
1
66
67
Tool kit
Power supply
Universal
screwdriver
Input:
100-120VAC/4.8A
or 200-240VAC/2.4A
Output：DC12V/ 29A
www.geeetech.com
Tel: +86 755 2658 4110
1
1
Fax: +86 755 2658 4074 - 858
-8-
ShenZhen GETECH CO.,LTD
GEEETECH
68
Stepper motor
42BYGHW8111
1.2A(U)
69
Motor driver
board
A4988/Drv8825
(optional)
4
70
Control board
Sanguinololu
(Standard )
Mega2560 + Ramps
1.4/Printrboard
(.optional)
1
71
Starter
ABS/PLA
filament
About 3 meters
1
Hotend V2.0
Nozzle size 0.3mm
(Standard)
0.35mm,0.4mm,0.5m
m (optional), for
filament size
1.75mm(Standard)，
3mm (optional)
1
72
5
Acrylic kits
A1
XZ frame
PI3A-M01
1
A2
Left side
frame
PI3A-M02
1
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
-9-
ShenZhen GETECH CO.,LTD
GEEETECH
A3
Right side
frame
PI3A-M03
1
A4
Z motor fixed
plate
PI3A-M04
2
A5
Z motor
support plate
PI3A-M05
4
A6
Smooth rod
fixed plate
PI3A-M06
2
A7
Rear support
plate A of
screw and
smooth rod
PI3A-M07
1
A8
Rear support
plate B of
screw and
smooth rod
PI3A-M08
1
A9
Front Support
plate A of
screw and
smooth rod
PI3A-M09
1
A10
Front support
plate B of
screw and
smooth rod
PI3A-M10
1
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
- 10 -
ShenZhen GETECH CO.,LTD
GEEETECH
A11
Screw and
smooth rod set PI3A-M11
blocks
4
A12
Y plate form
connecting
plate
PI3A-M12
2
A13
Y motor fixed
plate
PI3A-M13
1
A14
Y motor fixed
block A
PI3A-M14
1
A15
Y motor fixed
block B
PI3A-M15
1
A16
Y pulley
bracket
PI3A-M16
2
A17
Y platform
support plate
PI3A-M17
1
A18
Y bearing
limit block
PI3A-M18
4
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
- 11 -
ShenZhen GETECH CO.,LTD
GEEETECH
A19
Y limit switch
fixed plate
PI3A-M19
1
A20
Circle fixed
block
PI3A-M20
4
A21
Round washer
PI3A-M21
4
A22
Bottom plate
160*160*5
1
A23
Side plate
160*170*5
2
Plastic Parts
P1
X-axis motor
bracket
1
P2
X-axis optical
axis bracket
1
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
- 12 -
ShenZhen GETECH CO.,LTD
GEEETECH
P3
Synchronous
belt fixed
block
1
P4
Synchronous
belt platen
1
P5
Z-axis bracket
of end stop
1
P6
Print head
moving
bracket
1
P7
Extruder
bracket
1
P8
Synchronous
belt bearing
bracket
2
P9
Optical axis of
the platen
1
P10
Retaining ring
4
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
- 13 -
ShenZhen GETECH CO.,LTD
GEEETECH
P11
X-axis bracket
of end stop
1
Customers can also purchase the following items according to your needs
Item 1
Item 2
LCD Display
ABS/PLA
filament
LCD2004(LCD12864
optional, this display
need upload the
firmware yourself)
ABS/PLA
1.75mm/3mm
optional diameter and
color
1
2004
12864
1
ASSEMBLE INSTRUCTION
Before assembling, please familiarize yourself with all the parts. To help you assemble it easily we
have marked all the major parts in the follow pictures.
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
- 14 -
ShenZhen GETECH CO.,LTD
GEEETECH
The front view of the Prusa Mendel I3.
The left side view of Prusa Mendel I3 (power assembled on this side).
The right side view of the Prusa Mendel I3 (main board assembled on this side)
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
- 15 -
ShenZhen GETECH CO.,LTD
GEEETECH
The bottom view of the Prusa Mendel I3
The wiring schematic of main board Sanguinololu
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
- 16 -
ShenZhen GETECH CO.,LTD
GEEETECH
GENERAL CARE AND MAINTENANCE
As with all the electronic equipment, it is important to keep your printer clean to extend its life.
Regularly remove dust and debris with a microfiber cloth or compressed air. Dredge the tube and
the nozzle after use every time to ensure fluent performance.
„ Don’t leave the heaters on the printer turned on for a long periods of time when not used.
„ Don’t leave your printer in shady and moist places, which may exacerbate the problems
associated with erosion.
„ The three axes of the Me Creator are lubricated with grease for smooth operation and can
last for a long time. Grease may need to be re-applied to your printer to maintain smooth
performance.
„ Avoid positioning your power supply unit in such a way that the brick is hanging, pulling, or
putting any unnecessary stress in the electrical wires and components.
SUPPROT
Thanks for choosing Geeetech, we strive to provide a satisfied and pleasant shopping
experience for you, but we do understand there may be some questions you may encounter in
using our product. If so, you can contact us directly or post on our forum, our technique staff will
help you resolve it. For more detailed information, you can also visit Geeetech wiki from our home
page. (http://www.geeetech.com)
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
- 17 -
ShenZhen GETECH CO.,LTD
GEEETECH
GEEETECH
www.geeetech.com
www.geeetech.com
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
- 18 -