1. No category

CRYOSAUNA SPECIFICATIONS
CRYOSAUNA CABIN DIMENSIONS
Overall height with luminous roof 96” (8’ 4” clearance required) (XL unit: 100”)
Overall height without luminous roof
88” (XL unit: 92”)
Interior height of the cabin
72.25” base to top of cabin (XL unit: 76.25”)
Width of the cabin with door 36.00” closed / 61” Open Overall length of the cabin
58.00”
Height of a client
4’11” to 6’8” (XL Unit: 7’00”)
VENTILATION
Exterior
Color
Choices
Vent Height
90.00” must vent to the outside
Vent Hose Size
two vents ~ approximately 4.875” each
Ventilation
built-in blower expels vapor to the outside
Oxygen Monitor
required to be installed near the unit
LIQUID NITROGEN & ACCESS
Industrial Grade LN2
3000L external tank with 75psi pressure valve
Operating Pressure
44 to 85 PSI
Dimension of hole for delivery of LN
2.50” hole for 2” pipe from tank(s)
Recommend Hose / Piping
Vacuum Jacketed (½” to ½” JIC fitting)
ELECTRICAL DATA
Rated power up to 1,5 kW
power supply: 220V/50Hz
Electrical Outlet
220V ~ Single Phase (3 Wire) NEMA L10-30
Receptacle & Plug: Cooper / AHL1030R & AHL1030P
OPERATIONAL / TECHNICAL DATA
Range of working temperatures
-110°C/-160°C ( -166°F/-256°F )
Duration of a session
1 to 3 minutes (adjustable by operator) Advised initial session
1 minute 30 seconds
Maximum session duration
3 minutes
Cabin drying on end of cycle
90 to 120 minutes
©CRYO-220. ALL RIGHTS RESERVED
|
214.814.0848
|
RECOVER FASTER. PLAY HARDER℠