1. No category

Acatrain e.V.
4th AutoMetForm / 21st SFU 2014
November 3rd – 5th 2014, Freiberg
New Materials
for Vehicle Components
INVITATION AND PROGRAMME
Under Patronage of
Prof. Dr. Dr. Sabine von Schorlemer
Saxon State Minister for
Science and the Arts
Cezary Przybylski
Marshal of Lower
Silesian Voivodeship
O R G A N I S AT I O N
Organisation
Technische Universität Bergakademie Freiberg
Institute of Metal Forming
Prof. Rudolf Kawalla
Wroclaw University of Technology
Institute of Production Engineering and Automation
Prof. Zbigniew Gronostajski
Contact
TU Bergakademie Freiberg, Institute of Metal Forming
Bernhard-von-Cotta-Straße 4, 09599 Freiberg
Dr. Jens Grigoleit
phone: +49(0)3731-39-3550
fax:
+49(0)3731-39-3656
[email protected]
Kristin Butze (from August 2014)
phone: +49(0)3731-39-4136
fax:
+49(0)3731-39-3656
[email protected]
Conference Location
TU Bergakademie Freiberg
“Alte Mensa”
Petersstraße 5
09599 Freiberg
For travel and route information please visit
www.imf.tu-freiberg.de  SFU/AutoMetForm 2014
Opening hours of the registration and information desk
Monday
6.00 pm to 8:00 pm
8.30 am to 6.00 pm
Tuesday
Wednesday
8.30 am to 3.30 pm
Industrial Exhibition
Take advantage of the opportunity to present your company and
your products to a professional audience. Introduce your products
and services to potential customers. Please contact us for further
information:
Kristin Butze (from August 2014)
phone: +49(0)3731-39-4136
fax:
+49(0)3731-39-3656
[email protected]
Dr. Jens Grigoleit
phone: +49(0)3731 39-3550
fax:
+49(0)3731 39-3656
[email protected]
INTRODUC TION
Zbigniew
Gronostajski
Rudolf Kawalla
Introduction
Facing the challenges of today’s social and environmental developments, the choice of materials and production technologies for vehicle construction undergoes major changes. Using cost and energy
efficient solutions, providing enhanced functionality, and increased
light-weighting at the same time has become one of the main objectives for the automotive industry. This demands for an integrative and
holistic approach of developing new materials and production technologies.
The 4th international Lower Silesia-Saxony conference „Advanced
Metal Forming Processes in Automotive Industry – AutoMetForm
2014“, from November 3rd to 5th 2014 will provide an overview on the
most recent findings and developments in the field, especially with a
focus on research and industrial activities in Lower Silesia and Saxony.
Renowned scientists and industrial experts will present current trends
and most recent findings on the following topics
• current trends in vehicle development
• requirements of car manufacturers regarding new materials
• materials properties and simulation of forming processes
• new developments for sheet metal and massive forming
• innovative concepts for tool development and process control
We thank you for marking the event in your calendar and would be
glad to welcome you at the conference.
With best regards
Prof. Dr.-Ing. Prof. E.h. mult. Rudolf Kawalla
TU Bergakademie Freiberg
Prof. Dr.-Ing Zbigniew Gronostajski
Wroclaw University of Technology
PROGR AMME
T U E S D AY, N O V E M B E R 4 T H , 2 014
Monday, November 3rd, 2014
6.00 pm
Registration
6.30 pm
Poster Presentations
8.00 pm
Welcome Party / Get Together
Tuesday, November 4th, 2014
8.30 am
Registration
9.00 am
Opening and Introduction
R. Kawalla, Z. Gronostajski
Conference Chairmen
9.05 am
Welcome Adresses
Representative of the State Minister for
Science and Art of Saxony
C. Przybylski, Marshal of Lower Silesian Voivodeship
B. Meyer, Rector of TU Bergakademie Freiberg
Plenary Papers: Current Trends and
Challenges for Forming Technology
Chairman: R. Kawalla, Institute of Metal Forming,
TU Bergakademie Freiberg
9.30 am
Today‘s Challenges in Car Manufacturing – Driver for
Innovations in Forming Technologies
R. Neugebauer1, D. Landgrebe2, A. Sterzing2
1
President of the Fraunhofer-Gesellschaft, Munich
2
Fraunhofer Institute for Machine Tools and Forming
Technology, Chemnitz
9.55 am
Sheet Metal Forming Simulation –
Yesterday, Today, Tomorrow
K. Roll
University of Stuttgart, Institute for Metal Forming
Technology
10.20 am
New Trends in the Development of Energy Absorption
Elements of Vehicles
Z. Gronostajski
Institute of Production Engineering and Automation
Wroclaw University of Technology, Poland
10.45 am
Coffee Break
T U E S D AY, N O V E M B E R 4 T H , 2 014
PROGR AMME
Current and future trends in the automotive industry
Chairman: R. Neugebauer, Fraunhofer-Gesellschaft,
Munich (inquired)
11.15 am
Application of Alternative and Innovative Sheet Materials
in Automobile Manufacturing
A. Plath
Volkswagen AG, Central R&D, Wolfsburg
11.40 am
Innovative Light-weight Concepts in Car Body
Construction – State of the Art and Future Challenges
for Production Technology
H. Deinzer
AUDI AG, Neckarsulm
12.05 pm
Crash Performance Requirements as a Driver for the
Development of New Materials and Production
Technologies in Automobile Application
M. Boberschmidt
BMW Group, Munich
12.30 pm
Lunch Break
Production and Processing Technologies for
Innovative Materials
Chairman: H.-P. Vogt,
MgF Magnesium Flachprodukte GmbH, Freiberg
1.30 pm
Carbon Fiber-reinforced Metal Laminates –
An Alternative to Aluminium in Vehicle Construction
N. Modler 1, J. Jaschinski 1, M.Callin1, C. Klotzbach2,
C. Paul2
1
TU Dresden, Institute of Lightweight Engineering
and Polymer Technology, Dresden
2
ThyssenKrupp TechCenter Carbon Composites,
Kesselsdorf
1.55 pm
Customised Metal/Composite Hybrids for
Automotive Applications
T. Osiecki 1, H. Seidlitz1, C. Gerstenberger 1, P. Scholz 2,
L. Kroll1
1
TU Chemnitz, Institute of Lightweight Structures and
Polymer Technology
2
Fraunhofer Institute for Machine Tools and Forming
Technology, Chemnitz
PROGR AMME
T U E S D AY, N O V E M B E R 4 T H , 2 014
2.20 pm
Application of Magnesium Sheet and Strip Materials
in Vehicle Construction
R. Kawalla1, H.-P. Vogt 2, M. Ullmann1
1
TU Bergakademie Freiberg, Institute of Metal Forming
2
MgF Magnesium Flachprodukte GmbH, Freiberg
2.45 pm
Process Design Appropriate for Lightweight Construction
with Magnesium Alloys
F. Schieck, R. Haase, T. Lehnert, K. Richter
Fraunhofer Institute for Machine Tools and Forming
Technology, Chemnitz
3.10 pm
Application of Process-adapted Semi-finished Parts
for the Production of Thin-walled Components
via Sheet-Bulk Forming
M. Merklein, P. Hildenbrand, T. Schneider
Friedrich-Alexander-Universität Erlangen-Nürnberg,
Institute of Manufacturing Technology
3.35 pm
Coffee break
Material and Process Simulation
Chairman: Zbigniew Pater, Lublin University of Technology
4.05 pm
Numerical modeling and industrial testing of
residual stresses in hot-rolled sheets
A. Milenin 1, R. Kuziak 2, M. Lech-Grega 3,
A. Chochorowski 4, M. Pietrzyk1
1
AGH University of Science and Technology, Krakow,
Poland
2
Institute for Ferrous Metallurgy, Gliwice, Poland
3
Institute of Non-Ferrous Metals in Gliwice, Skawina,
Poland
4
ArcelorMittal Poland S.A., Kraków, Poland
4.30 pm
New Approaches for Hemming Simulation to Verify
the Manufacturing Process of Hang-On Parts
C. Kaiser 1, M. Zubeil 1, K. Roll 2, W. Volk 3
1
Daimler AG
2
University of Stuttgart, Institute for Metal Forming
Technology
3
Technische Universität München, Department of
Metalworking and Casting Technology, Munich
4.55 pm
Development of Hybrid Flat-clinching Based
on Numerical Simulation
T. Gerstmann, S. Lüder, B. Awiszus
TU Chemnitz, Dep. Of Virtual Production Engineering
W E D N E S D AY, N O V E M B E R 5 T H , 2 014
PROGR AMME
5.20 pm
Multiscale Modelling as a Support of Design
for the Manufacturing of Automotive Parts Made
of Magnesium Alloys
M. Ambroziński, Ł. Madej, Z. Gronostajski, M. Pietrzyk
AGH University of Science and Technology Krakow,
Poland
7.30 pm
Conference Dinner at the Concert Hall “Tivoli Freiberg”
“Saxon Award for Forming Technology“
Wednesday, November 5th, 2014
Current Trends in Sheet Metal Forming I –
Parallel Session
Chairman: Z. Gronostajski, Wrocław University of
Technology, Institute of Production Engineering and
Automation, Poland
9.00 am
Effect of Thermo-mechanical Processing on the
Mechanical Properties and Microstructure of
Bainitic Steels with Retained Austenite
G. Korpala1, R. Kawalla1, F. Hisker 2, B. Hammer 2,
T. Heller 2
1
TU Bergakademie Freiberg, Institute of Metal Forming
2
ThyssenKrupp Steel Europe AG
9.20 am
Reduced Carbon Content in Low Temperature
Bainite Steel
H. Palkowski
TU Clausthal, Institute of Metallurgy
9.40 am
Approximation of Intermediate States for the
Evaluation of Sheet Metal Parts
A. Brosius, N. Küsters, A. Mousavi
TU Dresden, Institute of Manufacturing Technology
10.00 am
Warm forming of Advanced High Strength Steel
R. Krupa
Kirchhoff Automotive Mielec, Poland
Innovations in Bulk Metal Forming I – Parallel Session
Chairman: D. Landgrebe, Fraunhofer Institute for Machine
Tools and Forming Technology, Chemnitz (inquired)
9.00 am
Lightweight Forging of High-tensile Steels
F. Wilke
Deutsche Edelstahlwerke GmbH, Siegen
TU Chemnitz, Institute of Machine Tools and
Production Processes
TU Chemnitz, Institute of Machine Tools and
Production Processes
W E D N E S D AY, N O V E M B E R 5 T H , 2 014
PROGR AMME
Innovations in Bulk Metal Forming II –
Parallel Session
Chairman: M. Pietrzyk, AGH University of Science
and Technology, Krakow, Poland
10.50 am
Workability of Magnesium Alloys
Z. Gronostajski 1, A. Niechajowicz 1, B. Bartczak 1,
J. Krawczyk1, K. Jaskiewicz1, P. Kaczyński 1,
W. Chorzępa 2
1
Wroclaw University of Technology, Poland
2
Kirchhoff, Mielec, Poland
11.10 am
Plastic Forming of Magnesium Alloys Aeronautical Parts
R. E. Sliwa1, D. Kuc 2, E. Hadasik 2, M. Tkocz 2,
A. Gontarz 3
1
Rzeszow University of Technology, Rzeszów
2
Silesian University of Technology, Katowice
3
Lublin University of Technology, Lublin, Poland
11.30 am
Rapid Prototyping Methods in Evaluation of Properties of
Plastically Deformed Magnesium Alloy Aircraft Wheel Hub
J. Bernaczek, R. E. Sliwa
Rzeszow University of Technology, Poland
11.50 am
Combined Cast-Forge Method for the Production
of Lightweight Parts from Aluminium
S. Dedov
TU Bergakademie Freiberg, Institute of Metal Forming
12.10 am
Influence of Process Cycle on Microstructure and
Properties of Nb Alloyed AFP-Steels
K. Schacht, U. Prahl
RWTH Aachen University, Department of
Ferrous Metallurgy
12.30
Lunch Break
Current Trends in Sheet Metal Forming III –
Parallel Session
Chairman: H. Palkowski, TU Clausthal,
Institute of Metallurgy
1.30 pm
Influence of Friction on Strain Distribution in Nakazima
Formability Test of Circular Specimen Stretching
D. Lumelskyy 1, J. Rojek1, R. Pęcherski 1, F. Grosman 2,
M. Tkocz 2
1
Institute of Fundamental Technological Research,
Polish Academy of Sciences
2
Silesian University of Technology, Katowice, Poland
Weight- and Energy-efficent Tool
Technology
SCIENTIFIC COMMIT TEE
Scientific Committee
Chairman
Prof. Rudolf Kawalla
Prof. Zbigniew Gronostajski
Members
Prof. Alexander Brosius
TU Dresden
Günter H. Deinzer
Audi AG Neckarsulm
Prof. Franciszek Grosman
Silesian University of Technology
Gliwice
Prof. Andrzej Kocańda
University of Technology Warsaw
Priv.-Doz. Welf-Guntram Drossel
Fraunhofer IWU Chemnitz
Prof. Roman Kuziak
Institute for Ferrous Metallurgy
Prof. Werner Hufenbach
Gliwice
TU Dresden
Bartłomiej Nowak
Markus Kreutel
Kuźnia Jawor SA Jawor
Porsche AG
Prof. Zbigniew Pater
Prof. Reimund Neugebauer
Lublin University of Technology
Fraunhofer-Gesellschaft Munich
Prof. Maciej Pietrzyk
Peter Nothnagel
AGH-University of Science and
Wirtschaftsförderung Sachsen
Technology Krakow
Dr. Armin Plath
Volkswagen AG Konzernforschung
Prof. Romana Śliwa
Rzeszow University of Technology
Dirk Vogel
RKW Sachsen
Janusz Soboń
Kirchhoff Polska Mielec
Dr. Roman Dziuba
GKN Driveline Oleśnica
Dr. Hanna Wisniewska Weinert
INOP – Metal Forming Institute
Poznan
G E N E R A L I N F O R M AT I O N
Conference Fee
The conference fee includes: access to the conference, conference
proceedings and printed list of participants, lunch on both days, catering service in coffee breaks, participation for welcome party, participation for conference dinner
Early Bird-Registration
until September 3rd, 2014
Registration
after September 3rd, 2014
490 €
university staff: 350 €
550 €
university staff: 400 €
Speakers: 50 % of regular fee
Please register no later than October 28th, 2014 by sending the fax
form or online registration. An invoice will be sent. The receipt of the invoice is the confirmation of your registration. Please pay the fees after
receiving the invoice. Cash payments will be possible at the registration desk. Cancellations will be charged with 25 % until October 15th,
2014. Any later cancellations will be charged 80 % of the full price.
Cancellation must be made via fax or e-mail.
Conference Dinner
The evening event will take place on Tuesday, November 4th, 2014
at 7.00 pm at the Konzert- und Ballhaus “Tivoli”, Dr.-Külz-Straße 3,
09599 Freiberg. There is the possibility for bringing an accompanying
person by paying a fee of 60 €.
Conference Language
All presentations should be held in English. There will be no simultanious translation.
Industrial Exhibition
Take advantage of the opportunity to present your company and your
products to a professional audience. Introduce your products and services to potential customers. Please contact us for further information:
Kristin Butze (from August 2014)
phone: +49(0)3731 39-4136
fax:
+49(0)3731 39-3656
[email protected]
Dr. Michael Seifert
phone: +49(0)3731 39-2951
fax:
+49(0)3731 39-3656
[email protected]
Questions Concerning Organisation and Registration
Dr. Jens Grigoleit
phone: +49(0)3731 39-3550
fax:
+49(0)3731 39-3656
[email protected]
Kristin Butze (from August 2014)
phone: +49(0)3731 39-4136
fax:
+49(0)3731 39-3656
[email protected]
A C C O M O D AT I O N
Accomodation
For participants of the conference a number of hotel rooms have been
optionised. For booking and further advice please contact our local
tourist information office using the reference „SFU/AutoMetForm“.
Phone: +49 3731 273661, e-mail: [email protected]
Alternatively, you can contact the following hotels directly:
Hotel am Obermarkt
Waisenhausstr. 2, 09599 Freiberg
phone +49 3731 26370, fax 0049 3731 2637330
e-mail: [email protected]
www.hotel-am-obermarkt.de
Hotel Kreller
Fischerstraße 5, 09599 Freiberg
phone +49 3731 35900, fax +49 3731 23219
e-mail: [email protected]
www.hotel-kreller.de
Hotel Alekto
Am Bahnhof 3, 09599 Freiberg
phone +49 3731 7940, fax +49 3731 794100
e-mail: [email protected]
www.alekto.de
Hotel Silberhof
Silberhofstraße 1, 09599 Freiberg
phone +49 3731 26880, fax +49 3731 268878,
e-mail: [email protected]
www.silberhof.de
Hotel Mauck’sches Gut
Hornstraße 20, 09599 Freiberg
phone +49 3731 33978, fax +49 3731 33978
e-mail: [email protected]
www.hotel-maucksches-gut.de
Altstadt-Hotel
Donatsgasse 3, 09599 Freiberg
phone +49 3731 207030, fax +49 3731 2070350
e-mail: [email protected]
www.hotel-freiberg.de
T R AV E L I N F O R M AT I O N
How to reach Freiberg
Map of Freiberg
4
6
1
5
2
Institute of
Metal Forming
Tivoli
Tivoli
Obermarkt
Alte Mensa
P
Parking Garage
asse
Oberg
traße
ther-S
n- Gün
Anto
Beust straße
200m
Train station
Registration for SFU/AutoMetForm 2014
November 3rd to 5th, 2014
FAX + 49 (0) 3731-39-3656
First Name, Family Name
Title, Position
Company
Street
Zip-Code
City
Fon
Fax
E-Mail
City, Date
Signature
Registration until
September 3rd, 2014
Registration after
September 3rd, 2014
 Conference Fee 490 €
 Conference Fee 550 €
 Conference Fee
University staff 350 €
 Conference Fee
University staff 400 €
 Speaker
(50 % of regular fee)
 Student (100 €; participation
in evening event, 60 €)
Notice
In accordance with the federal data protection act we are asked to
inform you that your address is stored and automatically processed
in a computerized file. During the conference pictures will be taken. If
you don‘t agree on being photographed, please inform us when you
register.


09596 Freiberg
Bernhard-von-Cotta-Straße 4
Frau Kristin Butze
Institut für Metallformung
TU Bergakademie Freiberg
Registration for SFU/AutoMetForm 2014
November 3rd to 5th, 2014