Installation Procedures
Super Bass Extreme | Floor
Page 1 of 1 |
Required Apparatus:
- 3 x Super Bass Extreme (Panel)
- 2 x Stacker Base
- 1 x Stacker Level
- 20 x self-adhesive Rubber Feet
Installation Instructions:
Make sure the room has all the necessary conditions to receive the acoustic panels.
These installation instructions mention the contents and installation process to stack three Super Bass Extreme panels.
STEP 1
STEP 2
STEP 3
Stick 4 (four) Rubber Feet the top side of the
Stacker Base as shown in the image.
Insert the Super Bass Extreme Panel in
the Stacker Base.
Stick 4 (four) Rubber Feet on both sides
of the 1st Stacker Level, as shown in
image above.
4X
4X
4X
1st Level
STEP 4
STEP 5
Assemble the 1st Stacker Level to the Super
Bass Extreme Panel and insert the 2nd Super
Bass Extreme Panel on top of the structure.
Stick 4 (four) Rubber Feet on both sides of
the 2nd Stacker Level, as shown in image
above.
4X
STEP 6
Assemble the 2nd Stacker Level to the Super
Bass Extreme Panel and insert the 3rd Super
Bass Extreme Panel on top of the structure.
4X
2nd Level
VICOUSTIC Office Rua Quinta do Bom Retiro Nº16, Armazém 9, 2820-690 Charneca da Caparica, Portugal | Phone . [+351] 212 964 100 | Fax [+351] 212 964 101 | E-mail . [email protected]
VICOUSTIC R&D and Logistics Facility Avenida do Polo 3, Nº159 . 4590-137 Carvalhosa, Paços de Ferreira, Portugal | Mobile . [+351] 917 851 019 | E-mail . [email protected]
VICOUSTIC USA 5701 Sixth Avenue South, Suite 229 . Seattle, WA 98108 | phone . [206] 767-2020 | E-mail . [email protected]
www.vicoustic.com | www.vicousticusa.com